HP DESKJET 3050 all-in-one j610a

Similar Questions

• DeskJet 3050 all-in-One J610A series will not print an alignment page

  I have owned this printer for a year and a half and have had little problems with it. When I inserted a new ink cartridge, it wouldn't print an alignment page. The display shows "load plain white paper on tray and press OK", I did. When I pressed OK, it says "printing" but made no sounds and nothing print. I tried the reset of the printer, the printer and the print spooler reset, cleaning, but nothing works. I can print other documents, but he always wonder to print a page of alignment first of all, that it refuses to print. I am at one loss for what else to do. Help?

  My first thought would be to do a firmware update, but there is not an update for this printer.  It is not really a power problem since you are able to print any other documents.

  You could try a reset by unplugging the power cord directly from the back of the printer when the printer is always on, and then disconnect the other end of the power cord.  Wait a minute and plug the power cord directly into a wall socket (not a surge protector or battery backup) and then again in the printer.

  If there is no change, you might take a look at the following links and if you see a step not taken, that give a try.

  Alignment failed

  No more paper

• DeskJet 3050 All - in - One J610a: I can not check ink levels or to make a diagnosis of cleaning on my HP Deskjet 3050 All-- one J610a in.

  I had this printer since 2011.  Over the past two years I have not been able to check my ink on my computer or access the diagnostic print page (to clean the jets of ink if necessary).  I've always been able to do that before, but something has changed several years ago, where the HP printer page is very different and is devoid of icons click.  I always do the updates from HP, but nothing has changed.  Help, please.  I'm starting to have problems with the printer and I think that if I was able to clean the jets of ink, would solve the problem.  but of course I don't have this icon in the HP file on my computer.  He has simply disappeared.

  Help!

  @BonBon64

  If you have not already done so, you can remove and then reinstall the software of full functionality.

  File name: DJ3050_J610_1315 - 1.exe

• DeskJet 3050 All - in - One J610a: changing the regional settings for a printer

  I have the printer which is purchased in the United States and used in India. He had 61 HP cartridges. Once the cartridge is finished, I click on buy online help from hp. He showed me 802 series I ordered online buy.

  See pages of different media, I called for regionalization reset HP call center, however they need original cartridges in working order, which is not possible now. I have infact thrown 'old'. Purchase 61 series in India will cost more than a new cost of the printer.

  Can you please let me know how this printer works with 802series?

  Hello

  As long as you have a fulll set new 802 ink cartridges you should be fine, the old cartridges are not required for such a...

  Contact the HP technical support once more as suggested, as a reference to show support representing the included object in my previous post.

  Kind regards

  Shlomi

• HP Deskjet 3050 all-in-one: cartridge hp not getting not

  Hello

  I bought my printer HP Deskjet 3050 all-in-One J610a United Arab Emirates. I bought it is with me to the India and looking for cartirage 122 which I'm unable to locate.

  Is there a compatible cartridge in India? Or I can change some settings of the printer so that it accepts another type of cartridge which is available here? Otherwise, this printer is just a piece...!

  Thank you!

  Hello

  In India, you must use the HP 802 ink cartridges, but you must call HP India and ask them how to reset the printer to accept HP 802. Please follow the instructions below:

  http://support.HP.com/us-en/document/c02558798

  Kind regards.

• Install Apps on HP Deskjet 3050 all-in-one a - J611h.

  Purchased a HP deskjet 3050 all-in-one a - j611h; tried to add applications, but they do not appear to manage my Apps.  When I click on 'Add to the printer', he says "added to the printer", but when I then go to 'Manage my Apps', there is nothing there! What to do next?

  Hello pisces3703,

  First of all, let me tell you that I'm sorry that you are experiancing this problem today.  It seems that you printer does not support printing applications.  Here is a link to the place where I foud this information: http://support.hp.com/us-en/document/c03722645. I hope you find this information useful.

• HP deskjet 3050 ALL-IN-ONE J6 has: windows 10 driver for hp deskjet 3050 has ALL-IN-one, j611 series

  After that I updated / downloaded 10 Windows on my laptop, I can't connect to my printer. It is even not appear as option in Windows, even though I made an UPDATE of Windows looking for my HP. How can I download a new driver? A new driver is available for my PRINTER HP DESKJET 3050 ALL-IN-ONE J611 SERIES a? Please don't tell me I have to buy a new printer...

  Thank you!

  Download the driver from the printer Support page:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050A-e-all-in-one-printer-series---J611/4311836/model/4311837#Z7_3054ICK0KGTE30AQO5O3KA30R1

• problem printing with HP deskjet 3050 all in one J610 series

  I have a printer HP deskjet 3050 all-in-one series J610 which I use with Windows Vista Version 6.0 (Build 6006: Service pack 2).  The connection is by USB port.  I have not used the printer for a while, but did all the maintence checks & it's good to go.  When I want to print a letter the only thing that is printed is the e-mail address that is blue in color.  I think the problem is in the settings of the features of the printer.  I can print the letter in gray scale, but it is not easy to read and is not suitable for business relationships.

  I would appreciate help with this problem.  A definition of the terms used in the features of the printer can help me to solve it in myself.

  Thank you

  I had a computer guy watch the printer for me.  It was broken & he just buy a new, he said.  I did it.

  So thanks for trying to help.

• HP Deskjet 3050 All in One J610 - do not connect to the network

  Hello

  I have a HP Deskjet 3050 All in One J610 peripheral.

  It worked fine for about a year, until one day he simply ceased to connect wireless to my network.

  I have not changed anything in the network, so I don't really have an idea why this happenned.

  The 'Wireless' has stopped flashing and I cannot know where to choose my network of. He asks a PIN (?) when I go to the wireless setup.

  Problem solved.
  I used the HP print and Scan Doctor tools, helped me to solve the problem.
  Thanks for reading my post and sorry for the spam your forums

• DeskJet 3050 all in one connection problems

  I have a 3050 all in one deskjet, I can't keep it connected to the computer, I have reinstalled several times, but I I can never find it on the computer

  Hello

  Please specify your operating system.

  In addition, you use the device with a USB connection or via the network?

• HP Deskjet 3050 all-in-One Printer J610a prints blank pages

  Your HP Deskjet 3050 print WHITE PAGES?

  I hope this post helps you, thank you. If you have any questions about this, feel free to ask.

• Printing from MAC for Deskjet 3050 ALL in one J611n - printer "Not connected" error message

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

  I see that I had 20 veiws and no answer!

  I am new to Mac and not very techno, however I seem to have solved this problem myself.

  I think that after turning to 'Maverick' on my Mac OS Lion, duplicate the printer as 2 showed in 'utility '.

  "I basically deleted that was not'online ' or 'connected '.

  Problem solved!

  Tracy UK

  TracyUK wrote:

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

• All scans are blank HP Deskjet 3050 all-in-one a

  I got a solution to this problem in March and try at the start of the solution proposed by Daniel. I don't know how to get in touch with him see if he has other ideas because its solution did not help.

  When I push the scan, a message is displayed: "machine not found. Make sure that the HP software has been installed on the computer. »

  I did it and he was there. What to do now to be able to scan?

  Work on a new iMac, Wireless Desktop OS10.7.4; attempt at analysis on a new HP Deskjet 3050 wireless has all-in-one

  Any help would be much appreciated. It's a pain when I need to scan I go my old Mac laptop.

  Thank you, Carol

  Hi Carol,.

  I do not know what measures you already tried, then where I write it double now let know.

  First of all, check that scan from the HP Scan software on your Mac up and running.

  Can also open the HP utility (whether in the Dock or in the Applications/Hewlett-Packard folder). On the bottom, you will find the scan settings section and the computer Scan-to-option. Please open and verify that the Scan of the computer is turned on or if maybe that any error is displayed here. You can also test one of the tasks of analysis from here.

  And finally and above all, make sure you have the update that resolves a Scan because of Mac with the HP utility. This update you can find on this link: critical update to correct scanning to problem on Mac OS X v10.7 (different product, but you can ignore it). It will install a newer version of scanning HP with a new layout.

  I hope the information is useful.

• HP deskjet 3050 all-in-one is compatible with mac osx 10.9.2

  I have a HP deskjet 3050 j610a fresh out of box. I can get it to print; It has a connectivity to my wireless router and it will print; My Mac Pro with OS osx 10.9.2 cannot print; I get the message: the printer does not respond.

  This printer is compatible with the Mac operating system? When will it be?

  THX

  Hello Greenwave3,
  Welcome to the HP Forums.

  I see you are trying to use your Deskjet 3050 on Mac 10.9.2. I will try to help you with this.

  OS X v10.9 Mavericks: installing and using the printer on a Mac, this document would you guide in installing the printer on Mac 10.9.2.
  If it is installed early return uninstall. You can also study the reset printing system and do a check and repair disk permissions, and then try to reinstall. Here are two Apple documents to help you:
  OS X Mavericks: reset the printing system.
  12.x disk utility: repair disk permissions.

  That a try and let me know how it goes. Thanks for posting on the HP Forums.

• DESKJET 3050 ALL - IN - ONE J610: scanning documents old printer/scanner

  EASY, I HAVE TO FOLLOW THE DIRECTIONS ON THE SCAN INTO A WORD DOCUMENT OR EMAIL. I HAVE A SCAN BUTTON, BUT I DON'T KNOW HOW TO SO HE COULD ANALYZE. IT SIMPLY PRINTS ANOTHER COPY!

  THE PRINTER IS OLD, RELATIVELY SPEAKING (MAYBE 4-5 YEARS) AND I DON'T REMEMBER IF I'VE EVER USED THE SCAN FUNCTION. I USE WINDOWS 7.

  PRODUCT NUMBER: CN [personal information]. HELP APPRECIATED

  Hi @Grandmatothree,

  Welcome to the HP Forums!

  I understand that you're wondering how to scan with your printer HP Deskjet 3050 on Windows 7, and I'm happy to help you!

  Please follow the steps in this guide, using full HP software (Windows 7) scanning function.

  For future reference, hereis the User Guide for the your printer.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."