DeskJet 3050

Similar Questions

• HP deskjet 3050 a: hp deskjet 3050 has 0xb04021a6 error codes

  At the error code 0xb04021a6 on the screen of the printer at the time wherever you turn it on.

  Have research all day but unable to know what means this error code.

  Hi @e-year-e.

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a HP Deskjet 3050 has e-all-in-one printer showing an error code "0xb04021a6" when he is running. I would like to help.

  These error codes are caused by hardware or firmware issues.

  "Here is the document of suppiort designed to be used with this problem - ' 0xc19a0005" or similar error.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Series Deskjet 3050: test printing sheet but only blank sheets come out otherwise, also can not copy to printer.

  Has made no recent changes outside the update for Windws 10.

  OK, thanks for that.

  Here is the link for the drivers and software for your printer page: http://support.hp.com/us-en/drivers/selfservice/hp-deskjet-3050-all-in-one-printer-series-j610/4066450/model/4066451#Z7_3054ICK0K8UDA0AQC11TA930C7

  If that doesn't show Windows 10 when you open it, and then click change and select Windows 10 in the menu drop-down.

  The drivers, you need to download are full feature software and drivers.

  Remove all the existing drivers and the software of the printer.

  Install the new software of HP but have the printer unplugged and it do not connect until the installation program invited to do so.

  After the installation is done and you reboot, you should be able to use your printer without problem.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HPJ610a Deskjet 3050: Join the network wifi through router new Deskjet 3050 HPJ610a

  I moved into an area of network connected to fiber (NBN Australia) and installed a new router D-Link DIR - 850L.  I was unable to connect to the router using WPS.  I had to buy a HP Envy, which connected wtihout difficulty.  I just upgraded my router to a TP - Link Archer C9, with a richer control interface, so I tried again to connect my Deskjet 3050.  Once again, no luck.

  I read a number of posts about this, and they all back down to the re-use of your installation of the printer software.  The problem is that the software driver for OS X El Capitan comes from Apple and is already up-to-date. I am able to run the printer when it is connected by a USB cable, so if I could work out how to emulate an installation, I might be able to get connected.  Is it possible to do this?

  Hello

  Sorry for jumping in, but the steps in Mac OS X are in fact incorrect.

  In System Preferences, select Printers and scanners.

  Double-click the listed USB printer, and then select the printer settings / Options.

  Open the Utilitiy tab, and then click Open Utility.

  In the screen, select Convert to wireless and follow the on-screen instructions to connect the pritner to your wireless network.

  Note: If no option appears, click the top phone menu and select Connect a new printer, and then follow the steps by choosing a wireless connection.

  Kind regards

  Shlomi

• Printer HP Deskjet 3050 has prayer after installing new cartridge HP

  After replacing the black cartridge the wrong printer aligns the chops from the top of the page and forget the lines print. I tried all the recommended soplutions. Even the alignment page has half of it missing, so is not recognized by the printer. Even if printing from my computer or just copy. Is there a way to reset top factory of the printer page and start again?

  Hi DavidAH,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 3050 went wrong aligns the chops from the top of the page and missing print lines.

  I recommend the following guides:

  1.) "alignment Failed" Error Message displays on the all-in-one.

  2.) Troubleshooting print quality problems.

  3.) reset of the printer.

  Hope this information helps and have a nice day.

• install deskjet 3050 without cd

  I can't find my CD to install my deskjet 3050 what can I do to install it without?

  Here is the link to download the star driver full compatible with Windows 7 for HP Deskjet 3050 all-in-One Printer:

  http://ftp.HP.com/pub/softlib/software12/COL34584/al-85606-3/DJ3050_J610_231.exe

  If you want to install it on any other operating system, please see the following link and select the appropriate operating system:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062 & LC = on & CC = US & DLC = in & sw_lang = & Product = 4066452 #n187

• Printer Deskjet 3050 (J-610): Driver for Deskjet 3050 with Windows 10

  When can we expect a driver to mount the Deskjet 3050 as a network under Windows 10 printer?

  Hello

  It is:

  http://ftp.HP.com/pub/softlib/software12/COL34584/al-109394-3/DJ3050_J610_1315-1.exe

  Kind regards.

• DeskJet 3050 a-J611g / CR232A: 0X00759C98 HW_WATCHDOG C, what is error - code this? How can it be solved?

  Hello, I have a Deskjet 3050 a-J611g / CR232A. I am running windows 7 (variety, that is to say: etc. ultimate, home premium,.) code error 0X00759C98 HW_WATCHDOG C, what - what? How can it be resolved? The only thing that was changed was I enabled update automatic and put in place e print. Everything seemed fine, but the next time I went to my printer this wasd error on the screen of printer control button. Once the printer starts after reset it again. Is there a bad Council, which needs to be replaced? There seems to be nothing broken or out of place, that's why I think. Any help will be greatly appreciated! If anyone has the definition of this error, it would be very useful! Thank you in advance!

  This also happened to me. To fix it I just unplugged the printer of and held the power button for about 15 seconds. The only changes that have been made before the error occurred were:

  1: network SSID was changed

  2: tried printing without black print cartridge (later discovered that she had no effect)

  3: new software installed on computer (don't think it was the question whether)

  I hope this works for you too!

• DeskJet 3050 connects to the router.

  I use a new HP Deskjet 3050 J610 out of the box (comes with a laptop purchase student a few years ago and was never used) with a MacBook Pro with OS X 10.9.1.  I configured the printer via a USB port by following the instructions and it worked well because the driver is preloaded in the latest version of Apple, but when I try to connect to my Belkin router the printer times out.  I ran the diagnostic page and the SSID names do not match.  I can't find a way to change the SSID the printer connect manually.  There is no HP folder on my computer that would normally House the printer configuration information.  I've looked through all the documentation on HP and can't find anything that tells me how to enter the establishment.  Any suggestion would be appreciated.

  Found the answer in an answer to a question on the HP Deskjet 3054.  Worked for my system, too, so I'm running.

• HP Deskjet 3050 J610a ePrint questions

  I have a HP Deskjet 3050 J610a printer that is listed as being capable on the list of HP AirPrint compatible printers and ePrint.

  However, I can't a Web Services tab at all when you access either the printer via its IP address or in the printer menu.

  I can't find an update of the firmware on the support of the printer section and have had no response from HP email warranty covered. Can someone help get this job, I can print wireless easily from the main engine, it was installed on, but can't see the printer and any apps ePrint AirPrint apps. When printing the configuration pages any printer ID or e-mail address is printed. As active poster on the section of Microsoft Web services.

  The HP support pages only to see Help information about the ePrint for Photosmart printers and Officejet, Laserjet, Designjet even though they support Deskjet.

  Any help is greatly appreciated as this is starting to annoy me now...

  Hi all

  The matrix management model has been updated! DJ 3050 has been replaced by the 3050 a DJ, plus additional models were added.

  One more thing... If you have the mobile device (iOS, Android, Symbian) and a DJ 3050, you have a printing solution. You can install the free application of HP ePrint home & Biz. This app will allow you to print to ~ 200 models of different HP printers, including the legacy networking and HP printers compatible ePrint.

• Cannot access Deskjet 3050 has with Hp Envy M4

  I am trying to connect laptop Envy my daughter to a Deskjet 3050 x a M4. I downloaded the x recommended software from the HP driver software and when the software said installation was successful, I chose a recipe to print, but it does not print. I have uninstalled/reinstalled the software and got the same result when you try to print another recipe. There is no other steps mentioned after successful installation. Are other measures, that I should have, as a reboot?

  I'm still trying to get my daughter's hand.  She seems to be dragging its feet in front of me.  I'll get a hold of you about the success or failure of the you recommendation

  Thanks for responding so quickly.  I only wish that I could have done it same thing

• DeskJet 3050: HP Deskjet 3050 nothing happens when printing from a laptop computer, but works very well of others

  So I just got a new laptop and I am trying to connect to my printer. I think he has connected all the beautiful and the printer will appear on my laptop. When I go to print something good, it is said that it is printing on my laptop (including indicating the percentage of how much it is printed) before disappearing from the queue on my screen. Nothing happens however on the printer.

  When we use another laptop that is connected before, it prints perfectly.

  Not really sure what is in place and was hoping someone could help me!

  Thank you

  Hey @burtonc,

  Welcome to the Forums of HP Support!
  
  I see that you have some problems with your Mac OSX 10.11 machine printing the Deskjet 3050 all-in-One printer. I can help you with that.

  To resolve this issue:

  1. If the printer is connected via USB cable to your Mac, delete it.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Hold down the CTRL key and click the icon of your printer on the left side.
  4. Click on reset printing system.

  If you removed the USB cable, connect. Otherwise:

  1. Click the 'more' in the corner.
  2. Select your printer from the list.
  3. Click in the box next to and select your printer from the list.
  4. Click on Add.

  Please let me know the results follow these directions. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet 3050 has j611a

  I have problems connecting my printer to my Imac. My printer is connected to the network fine as did that via WPS, but when I click on add printers in the settings on the Imac it does not show in nearby printers and I find just not. Can anyone help?

  Hi hawka2610,

  Welcome to the Forums of HP's Support.  I understand that you want to know how to print from iMac to your Deskjet 3050 printer.

  I have included installing the document printing software for a wireless network connection . It has a section devoted to the different operating systems.  Click on the version of Mac OS X you are using.  It will guide you through the download and installation of the printer software and connect to the printer.

• DeskJet 3050: Mfg mode

  I have a Deskjet 3050 mfg mode on the screen with none of the buttons being sensitive. Can anyone help?

  Hi @Schmugge,

• HP Deskjet 3050 (J610) - can not find the claim code

  I have a HP Deskjet 3050 J610 Series. I searched the support site of HP and may not know how to configure my ePrint printers. My ePrint printer turned on?

  There is no instructions that correspond to my machine on this site:

  http://support.HP.com/us-en/document/c03550536

  I found a video on the "HP Deskjet 3050 a" but it was very different from the standard 3050. My printer is set up wireless and I am able to print from my Android smartphone, but only if I am connected to the same wireless network.

  I have the impression that with a connected HP account and my claim Code printers, I can print from my smartphone using the Google Cloud from anywhere, I have access to the internet. I can't find my printers claim anywhere Code. I can print the HP Network Configuration Page in the menu on my printers Control Panel wireless, but it looks nothing like the page in the video.

  Thank you in advance.

  Hello

  The series HP Deskjet 3050 (J610) do not support the ePrint and therefore does not claim any code.

  The printer Deskjet 3050 a Series (J611) supports such a, your printer is not.

  You can view this document as a reference, the printer does not support Web Services and only allow printing via the local network:

  http://support.HP.com/us-en/document/c02814760

  Shlomi

• Cannot install HP Deskjet 3050 a using USB or wireless.

  I tried to install a printer HP Deskjet 3050 a on my computer recently.

  After inserting the CD her usually install page appears. When I choose to install the printer through the USB port, the program continues normally until it beginning to insert the USB cable.

  Having said the computer software does not meet attaching me the USB cable, just on the same window.

  When you try to install the computer over the network, it starts to check the network environment and will then pass the same window as before, indicating that I need to insert the USB cable.

  My USB ports work correctly, but the computer address to find the printer.

  I have a Dell Inspron 530 with Windows Vista Home Premium 32-bit.

  Hi Silvuss,

  I would suspect im a defective USB causes such behavior, such as cable used to direct connect also although it is used to establish the wireless connection.

  Please make sure that the USB port was not plugged launcing before installation, enter the control panel > printers and ensure there is no Deskjet 3050 a icon exists. If there is such a, delete it by clicking on the icon, and restart the PC, then try following the installation again.

  In addition, make sure that the USB port is not longer than 2 - 3 m long, directly plugged on the ports of the PC and not through USB hub or extension that will reduce its power.

  I also suggest that you try another cable and see if that can help you.

  A last suggestion, make sure that the CD and Printers lists the exact model as it must contain eighter HP Deskjet 3050 has or J611, make sure that there is no difference that its previous model have a similar name (Deskjet 3050 J610).

  Hope that helps,

  Shlomi