Deskjet 3054 to Maverick connection with router Motorola

Similar Questions

• DeskJet 3054 ceased to connect to WiFi

  DeskJet 3054 error 'not connected' comes after selecting the WPS option.  System used to work with WiFi under Maverick, but stopped with two changes: Comcast upgraded the router and update OSX.  HP support says that they do not have driver for OS x - 10.10 Yosemite... So what can I do to connect to the new WiFi network?

  Hey @dndutter,

  Welcome to the Forums of HP Support!

  I would like to help you today with the resolution of the networking problem you are having with your all-in-one printer HP Deskjet 3054. Given that you have received a new Comcast router the wireless should be implemented new on your Deskjet to work with the new router. Because you get the message 'not connected' when you try the WPS option, it would seem that your new router does not support this configuration. After selecting the WPS button on the printer, the printer starts a timer that allows two minutes press the WPS button on your wireless router. If you do not have a WPS button on your router that unfortunately Comcast failed to provide you with a WPS capable router and you will need to connect wirelessly via a USB cable. This can also be problematic on your Mac OS X 10.10 operating system that you don't have the full feature software and drivers. The last Mac OS offered the full feature software and drivers for your product was Mac OS X 10.8.  Therefore, you will use the generic Apple update driver.

  If you have a Windows PC or a Mac running 10.8 and underneath, you can run the Installation to feature full on this computer in order to put the printer in wireless via the USB connection. Once the printer is set up for wireless that simply add it to your operating system from Mac OS X 10.10 and you should have all the features. It should not be an option that you will need to do a wireless Ad-Hoc configuration.

  How to install correctly on Mac OS X 10.10:

  Note: Will need you a USB cable temporarily for this configuration.

  Step 1: Uninstall the drivers:

  Just open printing & scanning under system preferences and make sure that your Deskjet does not appear in the print & Scan window. If this is the case, select the printer and (-) less out to remove it.

  Step 2: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select Repair disk permissions

  Step 3: Check the Apple updates:

  Plug your USB cable from your Deskjet to your Mac.

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click Update now
  5. Install your available updates
  6. Restart your computer

  Step 4: Add the printer:

  1. Go to the Apple
  2. Select System Preferences
  3. Select Print & Scan - if your USB printer is not displayed as added in already click on the (+) plus sign to add the correct in driver.
  4. Now that the correct driver is added into your printer, you can connect wireless.

  Unplug your USB cable again please

  How Set up Ad Hoc Wireless:

  1. Select the button on the front panel of your printer wireless

  2. under the wireless menu, select settings

  3. under settings, select Enable Wireless

  4. once the wireless is enabled on your printer should be flashing the blue light

  5. Once your Mac choose your wireless icon. Under the list of available networks, you should see one similar to the one like the HP Photosmart which is circled in the image below. However, instead of Photosmart it will say HP Deskjet 3054.
  

  6. connect to the network that appears with your HP Deskjet 3054 inside.

  7. on your printer wireless light should go solid after a few minutes. At this point, you want to print a new Network Configuration report.
  

  1. On the control panel of the HP product, press the wireless button (). Wireless menu.

• Office jet pro 8600 connect with router but not recognized on the network

  I just installed new router e1200 lonksys. JO HP 8600 pro connects with the router, but the printer cannot see 8600. IP 169.254.223.37 on said install ip is the placeholder and printer not connected. have restarted once 1000 and tried to reconnect. New router has OMP and thrust of 3 seconds the button on the router. Also failed to connect on the router definition reviews

  8600 worked fine on the old router. Problem started when I connected the router after that cable modem connected then modem vonage. Previous setting was cable - vonanage and wireless router - all worked well then.

  Also downloaded 8600 new complete software after losing the Wi - Fi connection - please help!

  If the Ethernet cable is plugged into the printer, it will disable the wireless radio.

  If this is not the case in the network menu, network by default.  Then, in the same network menu, run the Wireless Setup Wizard.

  If this does not work, we will come on your new router a bit.

• Unable to connect with router wifi - Satellite L555-110

  Hello

  I use the following configuration:

  Satellite L555-110
  Modell Nr.: PSLW8E-01E00NGR
  Windows 7 64 bit Home Premium (with all updates)

  I bought this Book 3 weeks ago.

  My laptop won't connect to my WiFi router. I use the drivers provided by Windows Update.
  I also tested the following Realtek drivers:

  RTL8191_8192_SE_WindowsDriver_2007.1.1002.2009.F00 62.P0525_ISS_1.00.0130.L

  The connection still does not work.

  I always think that there must be a driver problem, because with another book, the wireless connection works fine.
  I can't find any solution, it's the readers makes me crazy.

  Is there advice, or is this still the problem of driver windows 7?

  Thanks for your help

  nofact

  Each laptop comes with preinstalled OS. You can use 32 or 64 bit OS (recovery Toshiba original image). Recovery image contains Toshiba driver WLAN tested and functional.

  So my question is: have you noticed some WIFI problems with this original configuration of Toshiba or later after Windows update?
  Please check all of the updates before installing them and do not allow drivers to update.

• Troubleshoot the bad connection with router (WRT350N) and Point (WAP4400N) wireless access

  Hi all

  I have a problem and will apprecaite all the help I can get. I think I will find an answer here.

  I have a small network, Linksys WRT350N (wireless router) attached to a modem and then connected to a desktop computer and with 3 wireless laptops connected to the router. All 3 are really great to work and access the internet very well.

  Currently, I have the need to expand the network to 3 floors, so I bought 3 Points of access wireless of Linksys (WAP4400N).

  I ran 3 cables CAT5e cable from the router and which ends individually all 3 floors, the top floor is less than the router 40meters. With the cables that came in their boxes, I connected the APs to the router and I have correctly set up the 3 Access Points with them attached to the router, all 3 works perfectly (I can access wireless internet via 3-point). However when I take the points of access to the upper floors and connect cables cat5e APs no longer work but connect after some time with the message "limited connectivity".

  Why can I connect when the APs are connected to the ground floor via a short cable that came in the box and not when it is connected to put cables from the ground floor to the upper floors but rather make the "LIMITED SERVICE" message and cannot connect to the internet.

  Also if I connect the cat5e cables directly to a laptop computer on all the floors, I can connect to the internet (the work of cables fine when connected directly to a laptop computer), but when it is connected to the connection of the APs has failed and I begin to see strange IP addresses from the APs.

  Oh, one more piece of important information: when I connect cables CAT5e cable on all floors direct to a laptop I can connect to the internet (the work of cables very well when it is connected directly to a laptop) but when connected to the failed to connect APs and I begin to see strange IP addresses from the APs.

  HEPL!

  I think I have the forum a status report on my post. As I mentioned in my last post, the problem has been as a result of lower cable at my provider. The network is running smoothly. Has been in place since last week when I replaced the lower quality cat5e cable cat5e cable.

  A Board here please be careful and make sure you complete the cable. A bad end can lead to connection problems I discovered in this case when my team confidence terminated cable incorrectly.

  Network up to & operational: Linksys WRT350N router without wire + 3 Linksys Wireless Access Points WAP4400N + Modem providing access to (1 computer (cable), 6 workstations (wireless), & 5 laptops (wireless).) Network to grow shortly.

  Thanks to everyone who helped make this project a reality.

• Re: office jet pro 8600 connect with router but not recognized on the network

  BUT... it did NOT work for me.

  I have the same situation:

  1. I bought and installed e-8600 HP OfficeJet Pro on my Linksys wireless network, while it was usable by anyone with connectivity to my wireless network.  It is installed without problem.

  2. I need to reconfigure and move my Pro e-8600 to my Linksys Wireless to my network routers NETGEAR AC1450 wireless, so I removed the printer and uninstalled all the software Pro e-8600 my laptop ACER running 7/Windows-b4bit.  I have restored the default settings on my Pro e-8600, reconnected to my network NETGEAR Wireless and restarted all power of the State.

  3. when I downloaded the latest driver for the Pro e-8600 to hp.com and tried to reinstall the e-8600 Pro on my NETGEAR network, the installation software couldn't recognize the e-8600 Pro on my NETGEAR network.  During the process, the software recognized the network, but the printer is not found.

  Help!

  Hello-

  Have you checked your router settings?

  Although the wizard detects the printer and you can reach the built-in Web server, the printer is not communicating with the router effectively.

• PC cable loss of internet connection with router WRT160N V2

  I'm new to routers and I just added a router WRT160N (V2).  Wireless through my laptop is great. However, I have 1 PC connected physically to the router. The internet connection is sporadic on this PC. I have "wireless" internet service high speed and sometimes you click internet or check your emails, and there is no internet connection. It seems to be after the PC has been idle for a while. When you click on the internet icon PC on the router not even flashes her - it's like the PC and the router do not speak. If it does not connect, the connection is great. Any help would be appreciated!

  There is a known problem with intermittent connectivity and firmware to build 11 for the WRT160N V2. 11 is the current firmware on the Linksys site. Check if you have 11 build if your router is a V2.
  Downgraded to build 8 fits usually correct these deficiencies, but Linksys told several people that they do not have firmware version 8 to give end users.

  It's ONLY for the WRT160N V2 router. This firmware will not work on WRT160N V1.

  You can find it at http://audipages.com/router/

  Follow download them and instructions to downgrade firmware on this page.

• HP Officejet 4622: HP Officejet 4622 connection with router Huawei E5180

  My can´t printer find the router. Each connection attempt fails. Is there something that I need to change in the router, and if so, what?

  Find my instalation CD and run it! This solves the problem!

• my hp deskjet 3050 will not connect with my apple mac

  My HP deskjet 3050 will only work connected to my Apple Mac, it should work wireless

  Hello Cerges

  You receive any type of error? Try the following article and let me know if you encounter any problems.

  Mac OS x: install the product software for a network connection Wireless (via an Access Point)

  Also, what is the model of your printer?

  How can I find my model number?

• Windows 7 on ASUS PC - connectivity with router wireless

  A few days ago my computer just stopped automatically connected when I connect to the wireless network.

  The troubleshooter it fixes every time, but if I do not use the internet, it stops again and I have to run again and again and again... Well, you get the picture.

  Can someone help me? I would really appreciate it.

  Bill

  Thank you land... it worked but I had to go into properties, go to the power management tab and remove the check in the box next to "allow this computer to turn off this device to save power".

• HP Deskjet 1510: My HP Deskjet 1510 does not connect with my Windows 10 PC

  Some help would be really appreciated. 

  Sorry, I suggest that call you HP on the phone now.

• DeskJet 3054 lost j610 of capacity with OSx Maverick wireless install

  Hello experts

  DeskJet 3054 worked flawless for 2 years AT & T Uverse router with my MacBook Pro. I installed OSx Maverick and FINALLY changed my network to WPA to WEP, and... wireless on printer light flashes and the only way to set up the network to a printer wireless is WPS pin (router cannot do push button). All other devices are works fine on the router after change (phones, iPad, etc.).

  I downloaded the latest updates for Maverick printer, added printer (USB), turned off all the elements (Mac, HP, router) and rebooted and went into the HP utility to try to set up the network. My camera is dimmed and the coils of the app and I can go further and set up a WiFi feature on printer.

  The Test report of the said printer wireless network can not find the access point. SSID do not match, BUT cannot enter the printer to change the SSID to match

  Am at my wits end. Apple says that talk to HP, but my warranty has expired! Please lend me your expertise!

  Hi Abisar,

  I understand that you have a Deskjet 3054 is no longer connected to your wireless network and since updating to OS X v10.9, you were unable to reconnect it to your new wireless network. I'd be happy to help you in this business.

  The printer requires configuration USB wireless, which requires the HP software, and of course, we do not have that. To get your printer connected, just take a slightly different approach. Please follow the instructions in this post, be it resolved the problem for someone in a similar situation. Since you have a different printer, however, you will need to follow the instructions below to print a Network Configuration Page. To restore your Deskjet to its network by default if please press the wireless button (as you did for the configuration page) and then select settings, and then default settings.

  Hope this helps, have a nice day!

• HP Deskjet 3054 ISSUES with Maverick

  Hello

  I'm having crazy questions my printer connected via a wireless network. My computer runs on OS X 10.9 Maverick and my printer is a HP Deskjet 3054. For some reason I can't connect through wireless. It works only when I have a USB plug my printer on my laptop. I have visited each page on this website and can not find an answer. There is no driver for it - I've updated all my software and there is not anything associated with HP. Help, please!

  Thank you.

  Hi taliataline

  There is no software available yet for the maverick configure the wireless.

  To get the IP address, you will need to connect to the network printers temporarily on the Mac.

  Click the Airport on the Mac located in the upper right.
  Click on the HP printer in the list. It takes a few minutes to connect and you
  should get a solid blue light on the printer.
  Then, print a configuration page to get the new IP address.
  Type the IP address in the web browser's address bar to access the embedded Web server the
  printer.
  Click the network tab, select Wireless and fill in the information.
  Apply the settings.
  Then back to the airport icon and reconnect to your network.

  The blue light on the printer is expected to remain strong.
  
  Go to the Apple, system preferences, print and scan, click on the + button, select the printer, click the Add button.

  Now try and print via the wireless network.

  I hope this helps.

• Connectivity with AT & T-Motorola 3360 and Airport Extreme problems

  Bought a new extreme-Airport (7.7.3) to replace my old AE after 9 years of service.  The installation procedure, but could not get the airport to connect with my modem (Motorola 3360).  Called at & T and they crossed put me the modem in Bridge mode and which seemed to work.  But only temporarily (about 5 hours).  Restart the modem and the airport was not working.  Troubleshooting I tried to plug my MacBook directly into the modem, but even the computer couldn't get an internet connection.  Another call to AT & T and they reconfigure the modem to their end.  After 90 minutes and try everything they could, they have finally admitted defeat and told me that they could not solve the problem.

  However, after a fairly exhaustive search of this forum, seems to be two issues that many people is with Airport extreme.  One is that the modem (in this case a Motorola 3360) is perhaps not fully compatible with the airport.  The AT & T support person was not aware of this until I asked about it, so she did a quick search and was rather surprised to see that there is a lot of people having problems with the Motorola Modem.  She told me that they use no more Motorola modems but ship the 6200 of Netgear.  "All know issues?", I asked.  She sought and, to his surprise, even once, there was.

  So, first question.  Does anyone know a modem that is compatible with the airport or use one that they had to limit problems with?

  The second question prevailing seems to be with the IPv6 protocol.  Anyone know if there are problems with the AT & T IPv6 protocol and the most extreme airport?  I did not disable IPv6 yet to see if that helps.  I thought I'd ask here first.  Couldn't find anything on the AT & T site.

  When I return from the road (great place to go to get away from technology) I will make a new round of full power of all the components and try Setup again from scratch.

  Any ideas or suggestions would be greatly appreciated.  Miss all know profanity.

  Thank you.

  Any other relevant information: 6.3.1 the utility Airport, Airport Extreme 7.7.3, MacBook Pro running 10.8.4, modem Motorola 3360, AT & T high speed DSL, shoe size 11-1/2 wide.

  When you have configured the 3360 as a 'bridge', this would mean that the AirPort Extreme should then be put in place to provide the PPPoE connection service. The airports are not known for their reliability in this type of installation... no matter the type of modem that you can select, so I drop this method as a connection option.

  If you want to keep the 3360... and you have time to experiment... then you can set the 3360 to its original default settings and configure the router from the airport most convenient to connect using DHCP in router Mode of DHCP and NAT.  That will produce what is called a message Double NAT, but maybe it's not of concern on a simple home network, and Apple provides you with the option 'Ignore' the Double NAT, so the airport will display a green light instead a light orange blinking slow.

  You need to try this configuration for a few days to see if the Double NAT will be a problem or not, because it is not possible to predict the effect of a Double NAT on a network... you have to test a few days see how things behave.  If this configuration works well, for you, then you can leave it as what.

  Please note that I do not recommend this type of installation, just suggesting it as an option this work could , if you want to keep the 3360.

  How Double NAT affect IPv6, I can't tell, since I did not use att for several years, and I'm not familiar with their implementation. On wired, IPv6 works fine on the airport with Comcast and Time Warner.  We can provide these parameters for you if want, but have no idea how well... (or if)... they will work with ATT.

  If the installation of Double NAT does not work, your best option would be to go there and get a modem/router or gateway to ATT device and then set up the most convenient airport in Bridge Mode works correctly with the modem/router ATT.  You will turn on the routing of ATT function in this type of installation, but the airport can also produce a signal from the wireless network that you can use.  The modem/router ATT will also provide a wireless signal that you could use for guests, or disable the feature, if you do not need two wireless networks.

  This may also be the best option if you want to configure IPv6 as IPv6 of ATT service must be compatible with the modems/routers and gateways.

• Satellite C660 WIFI does not connect with the channel 1 of the router

  Hello

  I have this problem for several months. I connect my laptop with the D - link DIR-615 as a WAP browser.

  I can't remember, but the fact is that I can't connect more with channel 1 of my WAP.
  Connection with the other channels is no problem.

  Other laptops or the available have no problem connecting to channel 1.
  He's tried a recovery, remove and reinstall the driver for my WIFI.

  All know what to watch?

  Kind regards

  Jacky Deschepper

  Where have you changed channels settings: within the router or the wireless network adapter?
  Is that it s any laptop you are using. It s always a matter of the WLan card that is integrated.

  Usually, you can change the Wlan card settings in the properties.
  Go to Device Manager-> Wlan card-> right click Properties-> Advanced tab
  Here, you would be able to change the available settings.