DeskJet 3055A: HP 3055 power cable has

Similar Questions

• Satellite Pro L20 - overheating of the power cable

  Hello

  For several months, I had problems with the keys suddenly works intermittently. Although brushing under the keys with a toothbrush relieved the problem for awhile it obviously was not the main cause. Each time, so not attributable to each of the keys of damaged to different keys.

  When unplugging the power cable from the metal part is very hot, and I worked on the problem of keys occurs only when the computer is running on a/c AND the battery is fully charged. In other words, no problem on the battery or recharging. The adapter is also hot, but guess that's 'normal '.

  The power cable has been tested directly from another outlet and not ongoing execution of the usual belkin surge protector, external sources seem so plotted on. I tried to find another cable/adapter to test but living very rural location of doubt this will be possible or practical.

  The fan seems to work OK, the air coming out of the side is very hot. It does not appear to be clogged with dust. Also, the area of the laptop above the fan heats up.

  Sometimes the computer crashes on black or blue screen (on iplayer lately, maybe other progs too) but the noise continues. I turned off by pressing the button for 5 seconds, but he still works for a while. I guess from overheating. But not some of it is always on a/c-do not charge, it may be on a/c-charge as well.

  Sometimes the computer seems confused if he is re-load, on a/c or battery. At least the icon switches and requires a session to unplug the device before doing things.

  Other times it is the machine of Angel since last two years! It's a Satellite Pro L20, the adapter's clover LiteOn 65W, 19V 3. 42 a. part PA3396E-1ACA (what I see is no longer available).

  Searched through but not found any similar problem, but hope someone can advise me what to do next!
  Thanks in advance

  Hello Robin

  It doesn't sound good. According to the specifications of the laptop, you have the right AC adapter. In my opinion you should contact the partner of service authorized in your country. Make a call and I hope they can help you how to handle this issue.

  It is also possible that they can send you new power adapter. Make a call and explain the situation. If you have need for addresses and phone numbers you can find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck!

• We have a whole new 6600 OfficeJet, power cable was stolen. HP does not sell it, where can I get one?

  Our Client has a HP Office Jet 6600 printer and the power cable has been stolen. It's a new current printer and HP still sells, but for some ridiculous reason, they do not support selling adapters for it. Anyone know where I can get one? EBay has not been successful so far. Thank you!

  Hi chrispat7,

  The part number for the power supply cable is 8121-0889 power cord (black) - 2-wire, 18 AWG, 0.5 m (1.6 ft) long - right (F) C7 taken (for 120 v in North America, opt. 953). Below a link to a document that will help you get this part is ordered.

  Purchase a replacement AC adapter

• DeskJet 3055 has J11n: connect Deskjet 3055a J11n wireless network without PIN or WPSA and with Mac Mavericks

  Hello

  I run a Mac with Yosemite and would like to add the printer Hp Deskjet 3055a J11n for the wireless network.

  My router doesn't have any a WPSA button and not a PIN code.

  Before, when I used Mac OS 10.6, I could run the features of the CD that came with the Hp Printer.

  When I try to open the Setup from the CD on Yosemite, he says 'cannot open only on Mac 10.6.

  How can I connect the printer to my wireless network?

  Thank you!!

  Marjolein

  Hi @MarjoleinPeters,

  A driver full features for Yosemite is not available for your printer, or from the CD supplied with your printer from the HP website.  This document applies to the HP printers supported in versions of Mac OS X 10.7 (Lion), 10.8 (Mountain Lion), 10.6 (Snow Leopard), 10.9 (Mavericks), and 10.10 (Yosemite) who have only drivers available via Apple Software Update.

  I can help you put the printer on your network wireless software. I use this method for iPads, iPhones and other devices that have no software.

  1. Restore default network settings on the printer by pressing the wireless button, by going to settings and then restore the default settings. The wireless button should then start flashing, this means that it is now in auto wireless mode.
  2. To connect to the network that broadcasts the printer. It is usually HP-setup-3050 has and then a part of the MAC address. Always wireless light will blink on the printer at this stage, which is normal since it is not a real ad-hoc connection.
  3. Load up the built-in webserver (EWS) in the browser of your mobile device. For automatic wireless default IP address is 192.168.223.1.
  4. Go to the tab network along the top of the SAP.
  5. Click Setup Wizard along on the left hand side to begin to set up the printer wireless.

  

  You have now completed the configuration of wireless network, follow the next 3 steps to start printing.

  1. Blue wireless light will be solid, put the Mac on your network.
  2. Add the printer in system preferences.
  3. Print

  Please let me know if that solves the problem. I look forward to hear from you.

• HPDESKJETF308 ALL IN ONE SERIES: lost deskjet power cable

  WE HAV LOST HPDESKJETF308 ALL IN ONE SERIES POWER CABLE AND MONITOR CABLE, SDGOB-0601, KINDLY HELP US TO GET THESE CABLES EVERYWHERE IN INDIA.

  Hi @551610,

  By your post, I see that you need the power supply lead for the Deskjet F308. I would like to help you today.

  I provided you with a link to the Web Surfer parts and HP parts store site.

  Welcome to HP PartSurfer!

  HP parts store.

  You may be able to order the part directly from HP. Please Contact HP Support. Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• iPhone 6 has ran out of battery juice, but won't turn on after connecting the power cable.

  Hello.

  I have an iPhone SIMless 6 (iOS v9.3.2) who missed the battery nothing to juice and turn off the power. I plugged the white USB power cable to a Windows laptop, but nothing happened. No power on, sounds, etc. I even tried another power cable and the source (power supply AC adapter and cable for the iPad). I don't even know if it is supported or not.

  Thank you in advance.

  If it is disabled on its own because of lack of power, it will take some time before he can return to the top.

  Plug it in and leave there for at least 10 to 15 minutes.

• MS A30 - battery charging when I plug in the power cable

  Hello

  I'm having some problems with (I think) on my A30 power management utility. When I am running on battery power and I plug in the power cable, the battery continues to discharge even if the laptop 'knows' that it runs on the power grid (ie the utility says "current generator: alternating current.") "Online, discharges: 82%. Strangely, if I put the laptop in mode 'sleep', then resume, she goes back to normal (i.e. working on current alternative, the battery charges).

  It is true, I think that this began after I installed "PC Pitstop optimize Scan" www.pcpitstop.com (please, not conferences - I used a couple of their public services before and they were very good, so I thought it would be too much), so I guess it's some sort of configuration problem, but I have no idea where to go from here. I went through all the options on the power management utility, but they all look sensitive. Any ideas (other than do not install software stupid, doubtful)?

  Kenny

  Hi Kenny,

  I experienced this behavior on my A30 where the system says it works on current alternative, but still drains the battery and stops eventually.

  In my case the problem has proved to be a loose DC Jack that sometimes cuts off contact with the socket on the back of the laptop. This momentary loss of power DC seems to provoke the power management utility switch to battery power, even though the DC power is restored. The only way out of this situation is to Hibernate / restarting the laptop.

  I think that it is a problem with the power supply subsystem in the laptop that does not react properly when it encounters a momentary loss of DC. Then the Toshiba power management utility is no longer responds correctly and switches to the battery power.

  My only solution to this was to anchor the DC cable to the back of my A30 so that there is now no chance of the plug DC moving in its socket. This has proved to be very effective for my A30 and I've had no recurrence of the problem.

  HTH

• End of power cable

  Hello

  This morning I had a new power cable that my old one has stopped working. At first, I thought that my new cable has been broken or wrong type as I have to turn/adjust/wiggle it is correct so that it charges. If it is a fraction out of place, that it connects. I thought it must just be the fault of cables. Then I thought about the idea that maybe it's the laptop in place and here's why:

  I'll take you right back to the beginning to give you all the information. Initially, I had the original Toshiba charger, but he left in a hotel while he was working in Australia. No problem, I thought and picked up a universal charger in a store of the local computer. And it has worked for almost 4 years. A few weeks there is the small part universal adapter between the cable and the laptop has stopped working. I reduced this only part trying small pieces of universal charger spare in other laptops, and they worked.
  Then I went to a local pc repair shop and the man in the shop gave me an adapter between the universal charger (using a different part of laptop) and the laptop as a measure in the short term. It worked even if it was temperamental and had to be waved and tampered with so that it can work - as I do now.

  The charger I received maybe is the problem?

  I enjoy any help/tips.

  Hello

  I don't know what model of laptop you have, but I wonder why we decreed not original adapter for your model of laptop.
  All you have to do is to contact the closest to the Toshiba ASP. They can check the database and find out which model is used with your model of laptop (part number).

• Satellite C850-B820 shuts off when I take off my power cable

  Hello

  I bought laptop Satellite C850-B820 2 months there is use to this normal subject, 2-3 hours a day, I was working on it without the power connected, the status of the battery was at 50% so I plugged in to recharge, suddenly power left and returned to 1 seconds, after a while, I took the power cable and suddenly he cut re plugged again and checked the status of the battery is completely charged 100%, someone has idea what wrong with it?

  Maybe the disconnection of electricity makes the battery or motherboard?

  > Shows 100% recharged, but the battery has no effect, if I unplug the cord cut.

  In my opinion, there are two reasons why the unit stops when you unplug the AC adapter.

  (1) battery failures and State of charge of the battery will not
  (2) electronic power supply motherboard is faulty. These electronic controls of the computer mobile power

  I think you should check if the new battery would help to solve your problem.
  But you said that the laptop is not very old, around the age of 2 months and so the warranty should still be valid.

  In this case, you should not attempt to resolve yourself but should contact the service in your country in order to verify the device. He should be permanently guaranteed covered

• Satellite C660 - 115 WLan connection only works when the power cable is connected

  Hello

  A few weeks ago, I bought a Satellite C660-115. I want to surf the internet anywhere in my house without any son/cables.
  On the first day, I had this problem: when I disconnect _power_ cable, the wireless connection will stop working.

  The Web page on my screen will always be there, but a new page loading is a problem.
  It is sometimes useful to recharge (by pressing F5), - sometimes not. It is always useful to "ip address of repair", but not for long.

  The only solution is to atach regardless of how much power the battery has still the power cord.
  When I do, it is no problem whith the connection at all.
  I went back to the store where I bought it, they related to their own wireless network and they have had the same problem after a few minutes. In the shop too attach the power cable solved the problem.

  So the problem must be in my lap top, not in my network (modem or almost).

  Doesn't this all seem familiar, and if so, how can I solve this?

  I hope that my English is understandable, I live in Holland.
  Thanks in advance!

  Here is the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

  Change options for saving for the Wlan in Windows 7 power management

• Satellite A120: Microphone does not work when the power cable is unplugged

  I have a Toshiba Satellite Pro A120, which has just begun to play up...

  I regularly record music of my DJ Mixer in microphone of my laptop entry, recording in Adobe Audition.

  Because the power supply makes a buzzing sound, I can't register with the power cable plugged... If I always record with the unplugged power cable, running off battery.

  I've never had any problems before, but what has caused the problem, I now, was earlier the battery ran out while recording, put the laptop into hibernation mode.

  Since then, I can't register with the power cable disconnected. He recorded only with the cable - which is not a good cause snoring.

  It is not a problem with hearing, because in Windows Vista its implemented the problem proved too. As soon as I unplug the power cable, microphone disappears from view.

  I used to work in IT support, so I'm not a technophobe - but I can't for the life of me works why it would suddenly start to occur, power is not related to the entrance it is micro... !

  One of you lovely people have ideas? I checked power options and the Device Manager to see if theres no hardware issues, but there isn't.

  I also reinstalled my sound card drivers.

  It's strange. I guess you tried a boot cold fresh. Hibernation can sometimes cause problems with the devices.

  Try to update the BIOS.

  If all else fails, you may need to reinstall Windows. (Backup your data and run recovery by holding down the button reset during power on)

• HP Deskjet 3055a can't scan to PDF

  I have a step scan to PDF using my HP 3055 a Deskjet printer.

  I use Windows 8.1, and I am using the desktop Panel. If I choose jpg is working allright, but if choose pdf, an error message shows up after a while, advising my to verify the network etc. The network works fine and I can print and scan in jpg format, but simply not in pdf format.

  Hey @nbolesen,

  Welcome to the Forums of HP Support!
  
  I would like to help you today to solve problems PDF Scan that you encounter on your HP Deskjet 3055a e-all-in-one printer on your computer Windows 8.1. Because the product is able to scan JPEG files very well we know at this time that the hardware on your product is very good. Because PDF files rely on a PDF reader to manage and view the PDF scans it maybe a problem with the PDF reader on your computer.

  Now, you mentioned that you use the desktop Panel. Do you mean the control panel of the printer or the scanner software HP desktop computer?

  How to scan from HP scanning software:

  1. on the desktop of your computer, open the HP printer Assistant. It should look like a black printer icon on your desktop ().

  2. once the Printer Wizard opens, select scan a Document or Photo

  3. once scanning HP launches, choose Save as PDF

  4. load a test on your product page and click Scan on the HP software on your computer

  This scan and register successfully?

  How to scan from the printer control panel:

  1. on the product control panel, press the button () next to Scan.

  2. press the button () next to the down arrow () to scroll and select your computer.

  3. press the button () next to the name of the computer on which you want to save the scan. The product scans the document or image and then stores it in a PDF file to the computer.

  This scan and register successfully?

  If the two methods don't scan PDF on your computer, please try loading the latest version of Adobe Reader and again test the scan function.

  Adobe Reader

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• Will not restart the PC if the power cable disconnected

  After a brief power cut recently, my desktop computer Dell Inspiron that PC will not re-start. The Start button was dead, as if the power supply cable was not connected. After about an hour it rebooted normally and was going well until next time, I unplugged the power cable; then it was dead again for about 1 hour. This cycle is repeatable. All goes well as long as the power remains connected. I can shut down, hibernate, or whatever it is, as long the power is not disconnected.

  It is never used to be like this. What has gone wrong?

  Hello

  I agree 100% that it's hardware related. I bet that cut in power was a power surge or something like that and something inside the PC took the brunt of it. You connect the PC to a surge protector by chance?
  I advise that you take that PC in a computer repair shop, or a competent expert, because it really doesn't sound like there is something of physically inside this PC that could be damaged. And whenever you're dealing with power, it is best not to wait until something is wrong.

• Missing optical drives after removal and reinstallation of the only power cables.

  I had a problem with my cd - rw (plextor px-5224ta) and dvd - rom not opening not readers.  I opened my case and only disconnected the power cables, leaving cables ribbons connected, so that I can drag players a bit and work with trays to correct.  Once this was accomplished, I reinstalled the screw on their trays and reconnected power cables.  I start and the discs are recognized only in the Setup, nothing in the Manager device or workstation tab 'manage '.  Once XP starts they disappear completely, no yellow exclamation point, no code error 39, etc just disappeared.  I searched through endless forums and this site and tried everything that has been mentioned previously (double check all physical connections, remove case filters in the registry, the thing FixIt from Microsoft).  When none of that worked, I figured that the discs themselves were dead, even if they would be open, close and turn.  I cannibalized another pc with a cd - rw to hitachi and who threw in there without change.  I booted from the cd - rw with no problems, but windows is not yet anything optical displays on my system.  The cd - rw and dvd - rom are configured as IDE primary master and slave, respectively, although I've tried in the secondary without success.  It seems to me that I have completely a software problem.  I think I'm pretty computer savvy but I am down to a reinstall of XP MCE and I wanted to check with the experts, if I had missed something before.  And if it doesn't I'll throw him off the roof :-)

  Thanks in advance,

  Kris

  Spec:
  Asus A8N - SLI MOBO premium
  AMD 3800 + 939 proc
  2 GB of RAM
  2 x XFX 8600gts XXX SLI would be
  250 GB Western Digital HD

  Hello Kcm308lr,

  Thank you for your message.  Your troubleshooting steps are healthy, the only thing that I would recommend before you resort to the "roof" or "Reinstall" would update the firmware or drivers.  You should be able to find this on the part of the manufacturer of your computer or the website of the manufacturer of the CD - RW.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP Deskjet 3515: My printer power light is FLASHING and printer will not be on

  I bought a HP Deskjet 3515 October 2013. It was working fine until a day back, I noticed the following: -.

  1. when I connect printer adapter led on the power adapter turns OFF green. When I unplug the printer, the Green led on the power supply turns ON.

  2. when everything is connected to the printer power button just FLASHES. No other does blink.

  3. the printer lights. Only the Power button continues to blink without.

  Hi @HP71013,

  I see that you are having feeding problems. I want to help you.

  Looks like the power cable or the power adapter, the origin of this problem.

  Please, try the procedure described in this document to see if it will help to solve this problem.

  HP printers - HP printer does not turn on or respond when the power button is pressed.

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.