MS A30 - battery charging when I plug in the power cable

Similar Questions

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Color scheme changing based whenever I plug in the power cable

  Hi, recently I have a very annoying problem.

  Whenever I plug or on the power cable the entire screen "blinks" a few times, shows a ToolTip really fast (I caught with a print screen and it says: "the color scheme was changed to Windows 7 Basic.) A running program is not compatible with certain Visual elements of Windows. Click here for more information. ("I can't click as it closes quickly) and then the screen is back to normal.

  Well, it's kind of normal. Open windows are becoming fully optimized not and if I'm on youtube then the video becomes really small, but if I reduce the window and open it again then it's good.

  It wasn't really a problem for me until yesterday when it happens again and became a black chrome, which has been opened until I plugged in the cable, and it took a few minutes before it returned to normal (unless I closed and opened again).

  I tried already in the system-> performance options properties to select the 'Adjust to improve the appearance"and it did not work.

  Unfortunately, I see no option here to post a screenshot of that.

  In any case, I have HP Pavilion dv6 Notebook PC with Windows 7 Home Premium.

  I have enough disk space in my computer and the programs that are open, when I do this are usually office (word or excel for most) and chrome.

  What can I do to fix this annoying problem?

  Try these:

  1 make sure that your graphics driver is up to date. Check the HP website for the latest drivers.

  2. make sure that the power plan that you use is not set to Power Saver. To check, go to Control Panel > system and security > Power Options.

  3. make sure that your computer has enough memory when you unplug the power cable. To check, do a right-click the taskbar, click Task Manager, and under the performance tab, verify the amount of memory is used. If it is more than 70%, you are running low on memory. Try closing some programs and then see if the problem persists.

  4. run the Aero troubleshooter. See this link for instructions: Open the Aero Troubleshooter.

• Presario CQ20-320TU: my notebook (presario CQ20) directly turn on when I plug in the power cord without battery

  My laptop (presario CQ20-320TU) turn directly every time I plug the power cord without battery. What is the solution?

  Hi there @emonsonjaya,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that your notebook is turn on/off automatically when it is plugged. I'm happy to help you.

  I would recommend that you look at your BIOS, especially in power options and check if your BIOS has a setting option on automatically. If yes it change at your convenience.  Another option would be to update your BIOS and see if that solves it.

  Here is the page of support for your model and, if necessary, give it a try, it will automatically download the file if you click on the link. You then need to run the executable file of your current download folder.

  HPQFlash for HP Notebook System BIOS (68PHU) - Microsoft Windows-Based

  If you are having problems with an update of the BIOS, you can always restore it, using the following:

  HP Notebook PC - restore BIOS

  I hope this helps.

• installation a hp deskjet f4480, when I plug in the usb cable, my computer cannot find the printer.

  I have an hp computer, product number NY545AA #ABA, with windows 7, 64-bit and a hp deskjet F4480 printer. During the installation of the printer, I get to the screen that you can plug USB cord say printers and after about 2 minutes. It says no device found. The USB cord is plugged into the printer and the computer, the printer is on. Finally, I have checked, add a device later. I fight the computer and printer together, about 3 years, the printer never worked. I have downloaded new software and the HP driver for my printer, 1 week ago, it did not help.

  Try to use the other USB cable

• My battery stopped charging. For four days, the power button says "59% available (plugged in, does not support)."

  * Original title: charging the battery

  My battery stopped charging. For four days, the power button says "59% available (plugged in, does not support)."

  How can I get the computer to start the battery again?

  The battery is probably faulty. You can say as follows:

  1. Shut down Windows.
  2. Remove the battery.
  3. Wait an hour.
  4. The power supply is cold? If Yes, then the laptop consumes no power (which is normal).
  5. Insert the battery.
  6. Wait an hour.
  7. The power supply is hot? If so, the battery is recharged.
  8. Start normally and check the charge level. If she's still around 59% while the battery no longer accepts the full load. You need to replace it.

• the power cable must be plugged or removed after fully charging the battery?

  Is there a problem with do not remove the power cable, after that the battery is fully charged on the Alien ware M17XR4?. In other words do fine even if the power cable is not disconnected once the battery is fully charged on the M17XR4?. Advice needed please.

  Most of the Lithium batteries are 'Smart Batteries' these days. It is a smart charging circuit.

  These means that they can detect when they are fully charged and continues to load (for some reason, so they do not over heat or explode).

  You can see in Windows that battery knows when she is fully charged (and cargo stops).

  However, I still like to bike (or run on battery... up to 30% or more) at least twice a month.

• How to control the battery charge when you are connected to the power adapter?

  I post here because I want to know if there is any software option that I can use to control on my load while I use the charger and the dough.

  EXPLAIN

  You know in IBM ThinkPad there are some utilities can help you master the power to CUT the battery charge and keep on the power of the charger and the battery is always on standby if it is OFF the bettery then work and never lose anydata

  I want to control the load while I'm working with battery and charger at the same time.

  I hope that claire ;)

  Hello

  It of not possible to control the battery charge using any software.
  The battery will begin to charge if the adapter has been connected to the laptop and it will stop the charge process after the adapter has been disconnected or if the battery is full.

  See you soon

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

• my screen goes black when I plug in my HDMI cable

  I have never had a problem with the help of my my TV HDMI cable to watch movies from my laptop.  I do not know whether the windows update is causing this problem, but when I plug in my HDMI cable to my laptop, the screen goes black and the TV receives no signal.

  Hi, I had the same problem when I plugged the hdmi for the first time that I chose the 'graphics options-> output-> TV' at first by right-clicking on the desktop. Later I selected "change pc settings" section of charms and the selected tab devices add a device and while the laptop was looking I have connected the hdmi cable. This is how I got to the TV screen.
  probably, you will need to turn off the TV and the laptop first. Then put on the tv and select the desired hdmi option before you put on the laptop and pressing on the ' logo window + p "or"fn + f4"keys. Lets c if it works

• B40-30 screen fades on W10 when the power cable is plugged

  Hi all!
  Couple B40-30 weeks bought it y a. upgrade to Windows Home 64-bit 10, then did a clean install of W10. Installed all the drivers required from the Lenovo site.
  After that (I don't remember what it was like before the clean install) I faced the problem: when I plug in the adapter the screen turns black (gray). When I unplug the cable screens becomes visible. Laptop is not actually usable while it is on the power grid.
  I suspect that there is something wrong with the power management settings.
  Any help would be kindly apreciated!

  Thanks in advance!

  Well, updated the BIOS. Problem ended. However - Thanks for the help and good luck!

• When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive?

  Original title: BAD USB

  I have an Acer netbook. I was able to download my photos from my computer on a USB key until a few days ago. When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive?  Why does it say this?

  I am confused with this... I really hope someone can help me.

  Thank you for your time in doing

  Dido

  Hey Toni-LeeFurlotte,

  ·         Have you tried to connect to a different USB port?

  Method 1: Try to connect the USB key to a different port on the netbook and check the issue. You can also connect the drive to another computer and see if the problem persists.

  Method 2: Update of the netbook with the latest chipset drivers. In addition, install other updates of the device driver. Log in the Web site of the manufacturer to do the same thing.

  Method 3: This problem can also occur if there is a drive letter conflict. A drive letter conflict occurs if the disk that is affected by the error is mapped to a reserved drive letter. I suggest you try to change the drive letter.

  How to change drive letter assignments in Windows XP

• HELMET No. Smartphones blackBerry icon when I plug in the BB Bold 9900 helmet. Help, please!

  Hello

  I just got my new BB bold 9900. Has updated the OS to v7.1.714. Now I see not a helmet on the homescreen icon when I plug the headphones of BB. Although I get sound when I plug from the 3.5 mm plug.

  Another issue is when I receive a call I am not able to hear the call, ringing on the headset, rather that I hear from the speaker as I would when no headset is plugged.

  I heard that it is a common problem when an upgrade of the OS is made. Is there a solution? Help, please!

  Hello crazygamerg7,

  Welcome to the BlackBerry support community.

  Thank you for your question about the helmet on the BlackBerry 7.1 software feature.

  The headphones icon should only appear in within the phone application and not on the home screen when connected and on a call.

  The ringtone will also go through the speakers of the device and not on taking 3.5 mm connected headphones. This is normal.

• Satellite C850-B820 shuts off when I take off my power cable

  Hello

  I bought laptop Satellite C850-B820 2 months there is use to this normal subject, 2-3 hours a day, I was working on it without the power connected, the status of the battery was at 50% so I plugged in to recharge, suddenly power left and returned to 1 seconds, after a while, I took the power cable and suddenly he cut re plugged again and checked the status of the battery is completely charged 100%, someone has idea what wrong with it?

  Maybe the disconnection of electricity makes the battery or motherboard?

  > Shows 100% recharged, but the battery has no effect, if I unplug the cord cut.

  In my opinion, there are two reasons why the unit stops when you unplug the AC adapter.

  (1) battery failures and State of charge of the battery will not
  (2) electronic power supply motherboard is faulty. These electronic controls of the computer mobile power

  I think you should check if the new battery would help to solve your problem.
  But you said that the laptop is not very old, around the age of 2 months and so the warranty should still be valid.

  In this case, you should not attempt to resolve yourself but should contact the service in your country in order to verify the device. He should be permanently guaranteed covered

• Satellite C660 - 115 WLan connection only works when the power cable is connected

  Hello

  A few weeks ago, I bought a Satellite C660-115. I want to surf the internet anywhere in my house without any son/cables.
  On the first day, I had this problem: when I disconnect _power_ cable, the wireless connection will stop working.

  The Web page on my screen will always be there, but a new page loading is a problem.
  It is sometimes useful to recharge (by pressing F5), - sometimes not. It is always useful to "ip address of repair", but not for long.

  The only solution is to atach regardless of how much power the battery has still the power cord.
  When I do, it is no problem whith the connection at all.
  I went back to the store where I bought it, they related to their own wireless network and they have had the same problem after a few minutes. In the shop too attach the power cable solved the problem.

  So the problem must be in my lap top, not in my network (modem or almost).

  Doesn't this all seem familiar, and if so, how can I solve this?

  I hope that my English is understandable, I live in Holland.
  Thanks in advance!

  Here is the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

  Change options for saving for the Wlan in Windows 7 power management