Satellite A100-405: keyboard shortcuts don't work on Vista

Similar Questions

• Satellite A100-405: black cracked screen

  Hello world

  I have problem with my laptop its TOSHIBA SATELLITE A100-405 and 2 year old so no warranty now.

  Just before 2 weeks his fall and lcd cracked, but even after cracking at least I was using it normally without replacement and wished to replaced soon but yesterday when I uninstalled the sound toshiba virtual (because it still looks like echo) suddenly collapsed knees work once uninstalled this virtual sound.

  I have to press power button to the market, but even after its on, I see on the screen.
  I tried to put the recovery disk, but after that, I don't see anything on the screen.

  Can you help me please what that is the problem, it is because of this cracked screen or uninstalled virtual sound.
  I hope that someone will help me solve this issue.

  Thank you.

  Hello

  I doubt that an uninstall of the virtual sound would lead this display problem
  I m sure that this display problem appears because the laptop has dropped down in the past

  I think you should contact an ASP in your country for a LCD test and perhaps you will need a new.

• Satellite A100-405: [Pickup and return] what information is required?

  I bought a Satellite A100-405 today and I have a problem with my screen (it produces sounds iritating). I phoned the Dutch Toshiba helpline and they said they will pick up tomorrow. I needed to write the number of application Service and address according to the guy on the phone.

  Is there anything else that I should put on it to help the DHL soon to Toshiba (Netherlands)?

  Concerning

  No, I'm Don t think we should give additional information from DHL. Just send your machine to Toshiba and they will handle the rest. Well, worry not Don t, buddy.

  Everything will be fine, because I did it 2 times and everything was OK.

  Greetings

• Satellite A100-405 - HARD 7200 RPM disk upgrade

  I want to know if I can improve the my Satellite a100-405 with a fujitsu hdd 7200 sata-II

  The original is FUJITSU MHV2160BT sata 150 MB/s depending on the Everest software.

  SATA controller is compatible and that's why it is not a big problem to use the SATA II HDD SATA I (150 MB/s) HARD drive.

  But of course the SATA II HDD will not reach full implementation and speed will be slowed to the limitation of SATA controller.

• Tool of Photoshop keyboard shortcuts do not work between two monitors

  Hello

  My friend works on Photoshop CS6, with 2 monitors and a Wacom tablet. Keyboard shortcuts do not work for one of its tools, brush sizes etc... It must manually, click on each individual tool and resize brushes, makes his workflow much slower. The keyboard works with other programs and the Wacom tablet works fine.

  For example, when making a mask and using the Brush tool, it can select B for the Brush tool. Then, as she is brushing, she cannot change the size of the brush, opacity of the brush or press the backslash on the keyboard to see the mask. She must manually, go to the toolbar and click the desired option.

  There seems to be a break with between the 2 monitors and keyboard. Any suggestion would be great.

  Thank you!

  Menus, shortcuts, Lasso tool or Photoshop constantly run when using a Wacom tablet. Mac OS

• Lightroom has just due to a malfunction.  'Fit' and 'Fill' overthrew.  The central panel stretches images.  The panels are blacking out and endangered.  Keyboard shortcuts do not work.  I can't scroll through images.  Photoshop is now malfunctio

  My Lightroom went completely wonky.  'Fit' and 'Fill' overthrew.  The central panel stretches images.  The panels are blacking out and endangered.  Keyboard shortcuts do not work.  I can't scroll through images.  Photoshop is now malfunction also.  Everybody runs into this and what should I do?

  Hi jodyd25200366,

  Could you please confirm the version of Lightroom, also the side panels are completely black and also if you can attach a screenshot.

  Kind regards

  Tanuj

• AI CS5 keyboard shortcuts do not work. I restarted and have no other problem with my MacBook Pro. What is the problem?

  AI CS5 keyboard shortcuts do not work. I restarted and have no other problem with my MacBook Pro. What is the problem?

  Bill,

  The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Adobe Story over my keyboard shortcuts do not work.

  Adobe Story over my keyboard shortcuts do not work. I'm on a Macbook. I'm really tired of using an obsolete Mac and Final draft AV, but I can't get this Adobe Story to work at all. I can't work effectively if I go to a drop down menu whenever I need a new element. I need the item and the type of strike. I am running the latest OS on my Macbook Pro.

  Hi Drake,

  I also found this post: Re: not working not keyboard shortcuts

  This blocking thread since this is a double post.

  Thank you

  Kevin

• Satellite A300D-158 illumination button does not work on Vista

  Buttons light Toshiba does not work under Vista.

  I installed added package versions available in Toshiba support page, but Toshiba Assist do not see the list of function buttons where I can change the feature keys.

  When this value added package is uninstalled all buttons works with WMP, but during the installation - do not.
  Illumination power button is not working do not by the press.

  This means support to toshiba button does not work properly with vista.

  I don't have these problems with XP

  Hello

  As far as I know, you can enable and disable the lighting in the BIOS.
  Go to BIOS and check if you can activate it.

  By the way; you said that buttons don t work with Vista.
  Have you tested this with Vista OS preinstalled Toshiba?

  You should do this!

• Satellite A100-1011E - AV button does not work

  Hello world

  I'm new here but I have an urgent problem. I hope that you guys can tell me what to do. I have this laptop SATELLITE A100-1011E model. My AV button which located on the left side of the keyboard does not work.

  I'm sure that it works always 3 days ago, but I don't know what I did and it doesn't now. I n it's a driver issue cause I just bought this phone 5 days ago. I checked with this 'Toshiba' commands in the Panel and I've assigned to the right program (windows media player 10) but it does not work when I press a key.

  Can someone help me with this? :( Thank you very much.

  Hello

  Until you try anything roll back OS to an earlier time using System Restore tool. Maybe it will help you.

  If this don't work let us know.

• Satellite A100-192: FN keys do not work after the update to Vista Ultimate

  I am a user of Satelite A100-192. Yesterday I installed Windows Vista Ultimate on my laptop. After installation, I realized 'Fn' and media player function keys buttons on my laptop keyboard do not work. What can be the problem?

  Hello

  Who knows? It s not easy to say what's wrong.
  Satellite A100-192 belongs to the PSAA9E series.

  All the drivers, tools and utilities need to be downloaded from the series on the right. Choose this model number!

  On the page of Tosh, you will also find the Installation Instructions. The drivers must be installed in that order. This is important.
  and don t forget to install the package of value added

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Satellite A100-192: keyboard bad - can enter a character

  "I have a Satellite A100-192 and for some reason, I can't enter this character." " ...
  It should work when I press ALT GR + w, but it doesn't.

  I asumed that it is reseverd for something (maybe ati radeon graphics card?) but I can not understand why...

  p.s. I posted the question here because I think it's a software problem...

  Post edited by: dcleaner

  What? I was a little confused m
  What character did you? This one | (vertical line)?
  This character shows in your ad then, how did you create it?

  I put t know why suggest you a few keyboard problems, but perhaps you have accidentally changed the language of the keyboard layout?

  Check it out

• Satellite A100 - 02L - Media Player has stopped working

  I have a Satellite A100 - 02L with Vista. I have there two weeks and media player has stopped working, it won't even open. It worked fine when I bought the laptop but not worked for the past few days.
  Does anyone know why it happened or how I might solve this problem?

  Maybe a magician can tell you for sure why WMP has stopped working. Who knows what you have done with it?

  Try to download and install the latest version. Maybe it will be working again.

• Satellite A100 display empty but external vga works

  Hello
  my two-year old Satellite A100-847 screen has stopped working. I used the external VGA monitor for a few days,
  and then switched back to laptop computer LCD and discovered that it doesn't work. It shows nothing, only the gray backlight.
  The LCD does not work even at start-up in WIN XP, or AC or battery power. I tried to disassemble the screen according to some guide
  to check if the cable is firmly in his place in connection to the LCD, but it has not solved the problem.
  I use the original BIOS and the somewhat updated nvidia display driver, it worked fine until now, so I suggest this isn't a driver/bios problem.
  (but maybe that is it, so I tried to install the original display with no effect driver.) I don't want to try to Flash the new bios and meet up with Kiss to the top view and bios too)
  Video output for external monitor is quite well, start-up or in the victory.

  Everyone sees a solution, please? Or should I just go to the service provider...
  Thank you
  Pepe

  I think that it s a hardware problem of the display or the FL-inverter.
  The FL inverter is part hidden somewhere close to the screen.
  It controls the backlight of the display.

  So you should go to an ASP, they can order the parts and exchange it or looking to ebay for a complete display and Exchange yourself.