HP Deskjet 3515: My printer power light is FLASHING and printer will not be on

Similar Questions

• hp deskjet 3050 wireless printer will not work

  I configured my printer with a router and it shows that it is online but he used to ' show on my laptop

  Hello

  1. you receive an error message when you try to print?

  I suggest that you try the steps of troubleshooting provided in the link below to troubleshoot issues with the network printer.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  See also:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• DeskJet 932C - the power light is on and the cartridge flashing

  Hello! I know my DeskJet 932C is 'old', but it seems to be in excellent condition.  First time that I had a problem.  The power light is on and the cartridge is flashing.  When I open the cover, the plateau of the cartridge moves to the far left.  The arrow points to the unfortunate color cartridge.  The missed years ago color cartridge.  I use my printer to print B & W, so I've been printing with the empty cartridge in place for years.

  I removed a reinserted the color and B & W cartridges and turn on the power and turns off.  I used the HP print and scan doctor, and it's scan does not have something wrong, I clicked on print a test page, and nothing happens.  The test page is listed as 1 document in the queue.   Status: error - printing.

  The printer has been in its current position on my desk for years.  It was not known of any trauma... None does damage... no power failure.  It's clean.  Has been connected to 4 laptops and uninterrupted service.

  I prefer not to buy a new color cartridge.

  Would appreciate help.  I would like to know what it means and if there is a solution.

  Thank you!

  Focus21

  The printer will perform electrical cartridges to light control and a few other times.  If an error printing can be blocked to avoid damaging the printer.  Clean the contacts of the cartridge as shown in the document here can solve the problem, otherwise you will probably need to replace the color cartridge.  The 932 Deskjet will allow printing with an empty cartridge, but for years, the cartridge may fail electrically and needs to be replaced.

• HP Envy 5530: Emits a light HP Envy 5530, but the printer will not be running

  Printer of opportunity, so no guarantee: it out of the box, plugged in and set up. I was able to connect wirelessly to my computer, but I don't have the right to ink cartridges. When the ink is right, I plugged it again. This time the printer power not on at all. The only thing that happens is that the signal power light briefly when the first powered. This isn't a loose thread, because I can only duplicate the symptom when connecting, not when moving or unplug the device. It isn't food, as I have him succeeded and get the same exact symptom. (PS, thanks for the power supply internal easy-to-swap!)

  Is it a kind of fashion 'sleep'? Any suggestions as to what this is. I am rather stuck with it since I bought the ink and an additional power supply, so I would like to address them. Help, please! Thank you!

  Hello @azvlr,

  Welcome to the Forums of HP Support!

  I understand you are having feeding problems with your used HP ENVY 5530 e-all-in-one printer. I see that you have already installed a new set of ink and replaced the internal power supply without result. Unfortunately at this time if a new power supply fails to solve the problem of flashing light output that the next step would be to use the printer.

  Please take a look at this paper Support HP "no power" to ensure that all steps are completed that follows: The HP printer will not be running or to respond when the power button is pressed

  The HP Envy 5530 is always a newly released product. Therefore, I highly recommend contact our telephone Support queue to explore additional options. If a replacement printer is necessary food and ink will not be wasted because they can be used in the replacement printer.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Regardless of the status of the guarantee, please call and see what additional options can do for you. I wish you good luck!

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• MX330 printer will not print. power WiFi ok

  I CHECKED POWER and telephone lines the printer will not print, the printer is not reconigzed

  Hello

  • What version of Windows are you using?
  • What were the changes made before the problem occurred?
  • You receive an error message when printing?

  You can check these links:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  See also:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: this link also means on Windows 7

• HP Deskjet F2210 printer will not print my documents with the exception of my e-mail highlighted

  HP Deskjet F2210 printer will not print my documents with the exception of my e-mail address highlighted who is on the document, it is not cartrages, as it will print one page black and multicolor of the internet. Help, please.

  If you found problems with print quality with the only printer without printing from the computer, then it is a hardware problem.

  You may need to contact HP (1800-474-6836) support. Looks like a print head may be bad or needs to be cleaned manually. I don't think that this printer has a detachable printhead to clean manually.

• HP F2210 printer will not be closed, and all the lights are on. Tried unplugging don't, no results.

  My Hp F2210 printer will not be closed, and all the lights are on. using a compaq presario with windows xp installed. I tried to unplug the unit. Problem has not been resolved.

  I'm sorry that you are experiencing this issue. Sometimes there may be ink system failures, ink cartridges are bad, or even the printer maintenance needs.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c01430567

  Let me know if it helps.

• HP deskjet 2540: HP 2540 printer will not connect to new router

  Hi, we just changed internet service providers and the printer will not connect to the new router, our HP laptop computer presents the printer in the list of network devices / wireless, but will not accept the password of network to the router when I ask him to connect. Makes me crazy! I have re-installed software etc. to connect the drive and make me anywhere I hope someone can help!

  Dave.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• HP officejet pro 8600: printer will not be used with the document in the queue

  Hi people,

  can someone help me please?

  I tried all the solutions proposed-

  Check connectivity

  restarted print queue

  Remove and then reconnect the printer

  Power reset

  Cancel job again.

  I had this problem before, but something so tinkering with the queue got fine but nothing works all the time.

  I just changed the cartridges...

  No matter what other dieas welcome please

  Ashoka

  Ash,

  I could be wrong, of course; Mac is not liable for the same way as the Windows environment.

  The printer can print when the print queue of the printer is on, ready to accept a job.  If the queue of work, i.e. the service on the printer running print jobs does not print to the printer, the printer will not print the work.

  If the printer on the computer service is not to blame, then you might indeed want to accuse the printer to not receive the work.

  You can check the communication between the printer and the rest of the installation between the printer and the service that sends the work to the printer:

  You could try to put everything back once more - to include your router.

  I hope this helps.

  Maybe someone with a Mac experience can shed light on the issue.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• my printer will not turn off

  Office Jet 6500, wireless, printer will not turn off.

  Disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

• My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  Hi 464544,

  Welcome to the Forums of HP Support! I understand once that your HP Photosmart 6520 starts in mode "sleep" you cannot send a print job, it does not automatically standby upward.

  Please take a look here:

  The printer into standby mode after five minutes of inactivity to help reduce energy consumption. The sleep time can be changed from the control panel. The printer will wake up mode 'sleep' to print when a print job is sent to it.

  However, the auto power off feature must be disabled. Auto Power-Off turns off the printer completely, you must use the power button to turn the printer back on. You can change the setting Auto Power-Off from the control panel. configuration -Source

  Menu Configuration > other Menus > Eco > auto shut-off > off

  I hope this helps.

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• E-all-in-one HPOfficejet 8600Pro printer will not now speak to iMac since updates Driver & Maverick

  I just bought a new HP printer and set up on my iMac to print. After a LOT of messing around FINALLY got it works, BUT a day later upgrades arrived to update my iOS X 10.9.3 with a simultaneous upgrade of the software driver for the printer. I duly installed at once – but now, regardless of what I do the printer will not work. The computer can be seen as it is showing ink etc. levels and said he printed and I can print test pages, but it has not allowed me to print from Word, Excel, Web or PDF!  I tried to uninstall the printer drivers and reinstall those of the HP Web, which I suppose would be the 'old' - but still no luck. I need this job and am close to tears - any help would be appreciated. I also tried deleting and reinstalling Office for Mac... NB it prints beautifully and effortlessly to my husband's PC.

  Welcome to the LAG54 forums,

  I saw your post about not being able to use the printer completely after a few updates. I will do my best to help you with this!

  First, try the following steps:

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart your computer
  4. Add the printer: full function and driver-OS X 10.9 Mavericks software

  I hope that does the trick! Let me know the results!

  Have a great Tuesday