DeskJet 3510 power after changing on my old router issues

Similar Questions

• My t61 - no power after changing the power plug

  Hello guys,.

  If the short story, the power jack on my t61 did not work. I bought a new one, changed today, I have the pluging it - no power at all. I don't think it's the charger until the end, that he was working, its here to say, I didn't start the laptop for about 3 months. It was a pain to launch before, I had to turn the power jack in all the possible was just to make it power on. So my concern is now that the motherboard is dead or not.

  Please all you have as a clue will be more than appritiated!

  There is not much needed to get the power led lights up. It is possible that you something shorted. IT is possible that something is not plugged in all the way. Even if the CPU is not in memory is not sitting, you would get the power light. Is it possible that the twist before broken wire between the adapter and the machine? You can get another power supply to try?

• DeskJet 3520: Question of an another DeskJet 3520 print after changing the ink

  Well, I'm another person with a POS deskjet 3520 which ceased print just black ink because I had the audacity to change a new cartridge. I've read at least 4 other threads full of posters with this problem extending over 1 1/2 years. I tried all the 'solutions' that HP experts say to try and not one worked. The printer is 1 month out of warranty now. I tried cleaning the contacts and updated the firmware and bought a second cartridge new, just in case the first was defective. HP really has need of man up and admit they have a problem with this model and fix.

  As it comes a 3520 model, you must call phone HP support, even if it is out of warranty. See the post for more details

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/black-not-printing-on-OfficeJet-4620-Photosmart-6520/m-p/4822686

• HP Deskjet 3510: HP Deskjet 3510 - unable to connect to the printer

  I had this printer for some time but have never been able to properly print to this printer using this specific computer.   FYI, I'm trying to print wireless at it. This office has wireless compatibility.  I have the drivers and all (I think, I HP everything at the time but not the disk that came with it I lost only).  Don't know why it fails, he said only: "unable to connect to the printer.

  Thanks in advance for any help.

  Hi aunt Shirley.

  First of all, we're going to connect the printer to the network:

  -Restore default values of network within the menu on the front panel of the printer wireless.
  -From your computer, connect wirelessly to the network printer (it should be a name similar to HP - Setup - xx - Deskjet 3510).
  -After successfully connecting to the printer, open a web browser such as Internet Explorer or Chrome and type 192.168.223.1 in the address bar and press ENTER.
  -Click on the Wireless Setup Wizard
  -Select your router and enter the password to connect to the printer to the router.

  Run again the printer software to your computer to rediscover the printer on the network.

  See the support institution by clicking on the thumbs upwards in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• HP deskjet 3510 does not work after windows 8.1

  My printer HP Deskjet 3510 cannot be detected after windows 8.1.  My computer is a HP Pavilion g6. Now, I would never, I clicked to install, I wish they would send me just windows 7. Laughing out loud

  @klb75,.

  Thanks for posting.

  The cardinal rule of when something does not work after update to 8.1 is put it back in place. This applies to the printing software and all other software. Uninstall from the control panel configuration, programs and features. Then, restart the computer.

  After that, download and install this software: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-108718-3&cc=ca&dlc=en&lc=en&os=4158&product=5157483&sw_lang=

  * Thus, before installing the software, disable all Firewall/antivirus software. This software can create conflicts with the printer software.

  If reinstalling it does not help, run print and scan doctor. He could fix it... http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=CA&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/printer_diag/&softwareitem=MP-135113-1

• Connect to a wireless printer 3510 to the internet after changing the wireless modem

  How can I get my printer wireless HP Deskjet 3510 for reading / connect to a wireless modem? I had a Belkin router with the modem and replace them with a wireless modem so I wouldn't have to have a router and the modem. Now, I can't get my wireless printer to connect to the internet. What I am doing wrong?

  Hello

  Please follow the instructions below to fix:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Kind regards.

• DeskJet 3510 problems with my MacBook

  When I first set up my printer, everything was fine. Then I changed my wireless settings, so I need to reconnect. I ended up using the disc (the first time, I think that I did it simply by downloading the driver, etc.). So now, it is not quite right. It prints but the print job is right there instead of to go, and to print something new the next day or another thing, I have to manually delete the old job. Also, I can't scan, even if I use the power cord and plug my laptop in this way. I have now two instances of the hp instead of a utility, so I should probably remove a.

  Hey SMGmi,

  Welcome to the HP Forums!

  Due to the fact that it is showing double of some software, this can cause mix ups and communication problems. I suggest you uninstall all the HP software for your printer. I've included the document "uninstalling the printer software.

  Once the uninstall is complete, while providing a new installation of the software. I suggest you one check and fix permissions of the drive running. I've included the document '12.x disk utility: repair disk permissions'. For step 3, where you want to select the disk, please choose your hard drive. After that the disk permissions repair complete, restart your Mac.

  Once restart is completed, please reinstall the printer software. I've included a link to "HP Deskjet 3510 e-all-in-one of the printer drivers". Choose your system operating, and then click Next. Click on driver - product Installation software. Then download and install the software for your printer.

  Print jobs are always stay in the queue after they print?
  Are you able to scan?

  Forward to your response.

• error printhead after changing the printhead in L7680

  I have an OfficeJet Pro L7680 that is a few years old.  Recently, I have noticed a decline in the print quality for mainly black, but also a little yellow, and after changing the black cartridge with no changes, I decided to change the Black/Yellow Printhead.  So, I thought that if I'm trying to change a print head, I should change the other (cyan/magenta).  I bought new Office Depot print heads.  After replacing the print heads that I was able to print a page or two, and then all of a sudden the printer started saying there is a problem with the cyan/magenta printhead.  I tried to remove and reinstall, the suppression and power reset and then put it back up, etc, but nothing moves it.  I have not yet called HP, but I hope that when I do they will help because the print heads are under warranty until 2014, even if the printer is out of warranty.  In the meantime, I thought I would ask here is - it possible I only have a print head of DOA?  Or would it be the printer?  Unfortunately I threw the old printheads immediately (stupid me) so I can't try that goes back to the old magent/cyan print head and see what happens.

  Hello jmmarton.

  Your chip printheads were damaged by inserting wrong while the transport is always on the right side. This document provides instructions on how to replace the printhead to the unit.

  Use the link below to find how to contact HP phone support in your country.

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

  See you soon!

• HP deskjet 3510, connected via wi - fi for MacBook Pro running OX 10.7.5

  All of a sudden my computer will not 'see' the printer, I recently changed my router, but I was able to print after the change, the printer is connected to the network on the wi fi is stable.  I followed directions available in the HP web site, including the lead from the printer to my computer, when I try to install the computer can't "see" it

  Any advice as to what to do next?

  Thank you

  10 guajiros

  '

  Hi 10guajiros,

  I want to help you get your Deskjet 3510 working on your Mac running 10.7.5. I understand that you already have a troubleshooting, but I am confident that we can get back to work.

  Please, take the following document and complement the solutions advocated; The printer keeps Wi-Fi connection.

  If the problem persists, please let me know what is the first part of the IP address of printers. It might be 169.254.XXX.XXX, or 192.168.xxx.xxx or 192.168.223.1. If end with 223.1 Please provides all of this period if not only need to know the first 2 segments (yellow and green ) of it.

  I look forward to hear from your part, thank you.

• Speakers stopped working after changing the device sound card

  * Original title: switched to hi-speed of dial-up, speakers stopped working / / rev. #2 Can I change the title of: speakers stopped working after changing the device sound card

  I have a Motorola SM56 speakerphone modem, I went from dial-up to the Road Runner.   When I open Device Manager and expand the sound column it lists "High definition Audio Device" (manufacturer of Microsoft), there are 4 that say "NVIDIA High Definition Audio" then there is one that says "Unimodem Half-Duplex Audio Device.  When I open the properties of the Unimodem device it says ' device working properly. "

  Let me start at the top under "General".  It lists the name of the device: Unimodem half-duplex Audio device.    Device type: audio, video and game controllers;    Manufacturer: Microsoft;    Location: Motorola SM56 Speakerphone modem.

  My speakers worked very well before I went.   I tried updating the driver but he came back with "best driver already installed.  It is a desktop PC, it is about 6 years old, but has been revised, graphics card new, updated to power, new 4 GB ram I think.  The hard drive is 1 TB.   I'm running Windows 7 Pro.  I forgot to mention, if I open a WMV file and volume in the taskbar commands, I see the green light moving.  The green light on the actual speakers turned on, just no sound.  It seems to me that the old speakers do not like the new modem from Time Warner. (I'm an old lady, what the devil I know)

  It is a question of another driver, or is it something else?

  Any help would be greatly appreciated.

  Are plug you the speakers into the modem?

  They must be connected in making your computer speaker, usually a light green color (read the manual of the machine). Go to control panel / sounds / playback and make sure that the type of speakers you selected as the default device.
  Audio device drivers updated its better to not use MS Update (it is not). Re-post giving your machine make name and exact model number (for example HP, Inspiron, ABC1234 etc.).
  See you soon,.
  Jerry

• Purchased in UK/Oz apps does not refresh after changing store in the USA.

  I was in the United Kingdom and Oz and had a UK or OZ account and bought apps - they updated very well (although never automatically as promised).

  Now, I moved to the United States and updated my account to USA store.

  The apps I bought previously refreshes (much).

  If I click on an app in the store I, iTunes think I haven't it and install it.

  Does anyone have the same problem and the solution? I fed it to Apple.

  On a latest operating system Mac and iTunes.

  Before changing countries make sure that you have downloaded and saved all your previous country store purchases.  You will not be able to re - download it again once you change of country and it won't be easy to change the country to another once you lose your mode of payment for the old country (such as a waiting period).  As long as you have on your computer you'll be fine.  You also will be able to update all the apps that you have purchased.

  Change your iTunes Store country or region - https://support.apple.com/HT201389 - "After changing the country of your account, you won't see what you bought the previous country store in the purchase section."

• Fan noise after changing graphics - Qosmio F10-101

  Two months ago, I had my graphics from nvidia fx 5700 for nvidia geforce go 6600.
  Since my computer toshiba qosmio f10-101. After changing the old graphics card there is a fan noise that starts and stops every 2 minutes, it makes me crazy whenever I'm hear.

  Can someone tell me if this is normal and if they know if the specific card is noisy in any laptop? or if there are ways to remove this noise or to maximize the speed of the noise. ??

  Post edited by: marlena

  Hello Marlena

  The Qosmio forum, you can find some similar topics with some interesting comments. On the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10944&messageID=42103

  Good bye

• Tecra M10 - #1 IDE error after changing ODD

  Hello community

  I know that the M10 is old enough, but until last week, worked well.

  First of all, there is no STRANGE access: drive doesn't recognize any media. After changing the STRANGE, I got the error IDE #1. After a little research I found that this must be a matter of ide toshiba cross wiring (?). Found something on the overcoming of the pins, but it did not work. Because I wanted to reinstall Windows XP (but the ODD is broken) I put the HARD drive in another laptop, removing all partitions on this subject, a reinstall a XP clear on that.
  Back on the M10, the laptop does not start but remains in a black screen with a blinking cursor.

  Anyone have any useful suggestions on these issues?

  Greetings and see you soon,
  Herz.aus.Gold

  Hello

  In my opinion the IDE error appears due bad master/slave setting of the new CD/DVD drive.

  The fact is that not all drives are compatible with all laptops. So the best option would communicate with a service provider allowed for a new compatible drive. An alternative, you can also buy the same car from an another computer store

• DeskJet 3510 will print offline immediately when Windows wireless

  With my brand new HP DeskJet 3510 series, the wireless installation completed "successfully" on windows 7 x 64. However, the first attempt to print immediately-even a test page - sends the printer offline. It will not go online again. But it prints well wireless from a Mac. Any ideas? I tried all diagnostic - windows and HP tools. On time 4 right now. Thank you!

  Dear neonskeleton,

  Thank you for your help and advice. Knowing that MacAfee firewall settings could cause the symptoms that I saw was the key to the resolution.

  (1) launch McAfee Security Center (version 11.6)

  (2) under the featurestab, select Web and Email Protection

  (3) in the options that appear, click firewall.

  (4) in the options that appear, click Internet connections for programs

  (5) in the options displayed, choose Spooler SubSystem App

  (6) with the selected item, choose Edit

  (7) change 'Access' to the outgoing
  (8) Chooe Save, then on quitMcAfee

  Hope this helps the next person.

• HP deskjet 3510 scanning black and white photos

  HP deskjet 3510 printer all-in-one scan computer black and white.

  I want to scan an image is what ever color.

  I don't see anyway to change the color.

  Hi len,

  You can choose "Scan to PDF"? I wonder if the PDF will scan in color. Let me know what happens!

  In addition, instead of scanning from the printers of the unit Panel, you scan from the printer software I was alluding in messages earlier? Scan from the software on your PC will give you all of the scan options.

  Take care