DeskJet 3520 light problem

Similar Questions

• HP Deskjet 3520 series problem the driver Installation of class after the victory 8 recovery

  Hi.I am Leonidas of the Greece and I am trying to solve this problem in the last 5 hours, my nerves are in very bad condition.

  I used this printer daily for many months without problem, but a few days before, it was necessary to do a restore of windows 8 due to a problem. So today, I tried to reinstall my deskjet 3520, but I can't, everything I tried. The begginning I started with the installation cd. I could see the 3520 to my device at the Control Panel, I could see it in my network, but it was not possible to print. So I reinstalled deskjet 3520 and I installed it again but has not solved the problem. The system stop at step who wonder if the printer has wireless and I say Yes so he asks me the IP address or the computer name. I write the IP address (I know because I managed to print the test page to the thw first time of installation), but I can't spend the extra step because "the computer and the printer are related to different routers".

  Please give me a solution... I look forward to hearing your response.

  Thank you

  Hi again,

  By your final details I could understand that the printer is disconnected from your network, and therefore it cannot be.

  Please try as below and let me know what happens:

  1. From the front panel of the printer, enter the configuration menu, select Tools and then select Restore Factory Defaults.
  2. From the front panel of the printer, go to the menu of wireless by clicking on the wireless icon, select Restore Defaults and confirm by selecting Yes.
  3. Disable the pritner.
  4. Re-turn on the pritner.
  5. If the software exists on your laptop, open the HP Deskjet 3520 and select Connect a printer using a wireless connection, if it was removed to perform the installation of the software, select Wi - Fi.

  Now, you should be prompted with the steps to connect the pritner to your network wireless during the configuration of the wireless device.

  If you still experience a problem, temporarily connect the printer with a USB port and then to open its software.

  Click on the Tools icon and select Convert USB to wireless connection to reconnect it to your network.

  Shlomi

• HP Deskjet 3520: Printer uses a different color than the original

  Although I have a lot of little black ink low on color my impressions are coming in red now in yellow instead of black and Red

  Hi @Deborahdebster

  Welcome to the Forums of HP's Support.   I understand that when you print using your printer Deskjet 3520, a problem of print quality with regard to the colors.

  I've included the document to solve the problems of quality Print to the HP Deskjet 3520 and HP Deskjet Ink Advantage e-all-in-one 3520 Printer series . There the steps you want to fix the problem of print quality.

• Problem with black ink cartridge HP Deskjet 3520

  I just replaced a (almost) empty black ink cartridge in my HP Deskjet 3520 printer, and now I get no word on paper. The printer prints photos of a text, but not the text. The test page only gives light gray instead of black values.

  I put the cartridge almost empty return, but the results were the same: not a single word of the text has been printed.

  Can you help me with this one?

  Thanks for the reply. I cleaned up the area where the open cartridge area (square round where the ink comes out) ink and leaves the cartridge references in printer from one day to the next. By making these 2 steps, it started fine printing and quality is really good like the other. Thank you!!!

• Problem of printinng of color Deskjet 3520

  Hello

  I have a problem with the blue ink cartridge. Said showing the level of ink cartridge is almost full but blue is not printing.

  There is no warning anywhere.

  Thank you very much

  Ian

  Hi cardiffian,.

  Welcome to the HP Forums!

  I see that you can not print in blue with your HP Deskjet 3520, and I'm happy to help you with this issue of print quality problem!

  To get help, I'll need to know:

  1. If the printer is connected, wireless, or USB.
  2. If you are using a Mac or Windows operating system. To find the exact version, visit this link. Whatsmyos.
  3. If the printer is capable of making copies of itself.
  4. If the power cable plugged into a surge protector, or directly on a wall plug. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  In the meantime, please take a look through this guide. The printer does not print black ink or color of ink or prints blank Pagesand let me know what happens.

  I hope to hear from you and have a nice day!

• Analyze problems with Deskjet 3520

  I have a laptop HP with Windows 8 (which I'm not very familiar with) and I am trying to scan photos on a HP Deskjet 3520. I'm not in my home office but in a House with already like two MACS, one that uses the wireless Deskjet printer.

  I can print documents.

  If I try to use the dialog box on the Deskjet to analyze the error message tells me to install the drivers (ILO recognized my machine)

  I had could scan some photographs, driving the process of digitisation of the right click on the printer icon in the control panel option, and the Deskjet printer recognized it was connected to my laptop. However, then the dialog box on the Deskjet printer froze and since then I have not been able to scan.

  I turned both machines market.

  I disabled the button on the printer wireless and only used the USB cable.

  I downloaded and installed the drivers for the recognition of HP printer Deskjet software. This at least gave me the right click scan option to return (it keeps being removed from the right click menu) and the Deskjet printer makes noises of scanning. However, the dialogue froze on treatment scan. When I turned it works again, the scan option was missing in the right click menu and once more the Deskjet printer doesn't recognize my phone.

  Unfortunately when I installed the drivers I had not disconnected the cable USB Deskjet.

  In my home office, I have a HP printer and when I want to scan on my PC I have a HP dialog box in my Start menu that allows me to drive the scanning process from my PC, rather than the HP device. Where this dialog on my laptop?

  And how can I solve this problem?

  I'm reasonably IT literate but not great technique.

  Hi @Joannacherry,

  Welcome to the Forums of HP Support!

  I see that you are having problems scanning with your HP Deskjet 3520 e-all-in-one printer. I want to help you with this.

  In order for me to help you, I may need more information. It seems that you are having problems of computer of window 8, but not the Mac?

  Do you get any error messages?

  NOTE: Unplug the USB cable before you reinstall the print driver.  It is not detected, if already connected.

  Please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  I recommend, updated the firmware of the printer, click here to download it.

  Here is a document that I recommend that you try Scan from Windows 8 with full functionality software HP for HP Multifunction printers.

   

• DeskJet 3520 problem PDF print double sided

  have a brand new HP Pavilion with deskjet 3520 computer.  and windows 8.

  duplex printing on the deskjet printer test, found stall to halfway through printing.  support got me to download the new firmware for the printer, and then it works better. \

  multi-page prints word documents double-sided without problem. but the PDF documents will not print entirely double-sided.

  Gets to halfway through and hold; research in the print spooler, shows ' printing... error.

  tried foxit and adobe, same result.  both printing single-sided without problem.

  someone at - it any help?

  Thank you

  Vern

  I solved the problem myself by plugging the USB directly to the computer rather than an extension. \

  Thanks for your interest,

  Vern

• HP deskjet 3520: download of driver problems

  Dear friends, hope everything goes well.

  I have a printer HP deskjet 3520 and this isn't the model "all in one".

  I tried to connect it to my laptop and after many attempts, he could not find or download the proper drivers.

  The HP Wizard can't Identift this model I have. It is by default a model 3500 when I connect the printer to the USB ports.

  I suppose that in order to operate this printer I'll have the right drivers, etc...

  For any help or suggestion is very appreciated.

  Sincerely, Ralph

  Thank you all...

  I found the right drivers.

  See you soon,.

  Raphael

• Reconfiguring a printer wireless deskjet 3520 on the new network.

  Hello... I bought and installed my deskjet 3520 on my wireless network and 2 laptops about 1 week ago.

  Everything was fine but then a PC started refusing to connect to the network.

  Technical support to the Belkin unhooked all the network and uninstalled everything... then reconfigured a new wireless network. Call Net2.

  Access both the web very well on Net2 PC but the printer connects is no longer makes sense if he still thinks I'm on Net1.

  So... the question is... What is the best way to get the 3520 to be accessible on Net2 on BOTH computers.

  I didn't want to screw up whatever it either so have not tried whatever it is me again!

  I'm reasonably notified have the installation disc. Win7 operation on both computers. Wired ethernet connection available and can connect each PC with a USB stick if necessary... but really want to use both wireless. I also have original HP print and scan doctor installed from the installation process!

  Hope that helps and thanks in advance!

  No problem!

  When you post again, I'll check in.  I wish you the best in getting the printer is connected to the new configuration of the network.

  If you need assistance I am more than happy to help.  Have a wonderful and safe trip!

  Jason

• HP Deskjet 3520: Windows 10 update, failed to refresh an ink

  Since the update to Windows 10 I lost the HP page that allows me to update the ink, scan to printer, etc.  How to do that now?   Your help will be greatly appreciated.  Thank you.

  DiGill

  Hi @DiGill,

  I saw your post about software problems you encounter since the upgrade to Windows 10 and I would like to see if I can help.

  First, you must consider the information contained in these resources.

  • Guide to upgrade Windows 10 for HP printers
  • Compatible printers Windows 10

  If you printer software was installed before your upgrade, I try to uninstall the software completely and then reinstall it by using the most recent driver available on the HP Web site. Here's how to clean all the drivers of your computer.

  I recommend referencing the steps described in this document to make sure that you haven't missed anything whatsoever;  Uninstalling the printer software - use as a rough guide, but the steps for Windows 8 should be pretty close to Windows 10.

  You can also delete files using disk cleanup - take care to put check marks in selection boxes when it is available. (Once again Windows 8)

  Software drivers can hide other places would be in your device manager.

  To open Device Manager:
  1) enter the Device Manager in the search field.
  2) click on Device Manager.
  (3) you can click on View, in the upper part of the windows, click Show hidden devices.
  (4) to develop the types of devices and check for any pilot associated with your printer.
  (5) to remove a device from Device Manager, click on the name of the device in the list and then click Uninstall.

  For more information, see for Windows Device Manager information 8/10.

  Download the newest software package here; Drivers and software features full printer e-all-in-one HP Deskjet 3520.

  Or download the direct link here.

  Then look for the updates of Windows; Drivers and software with Windows Update (Windows Update 10, 8)  

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP Deskjet 3520 - will not print black text

  I have a Deskjet 3520 printer.  I installed a new HP ink cartridges, color printing works fine, but the black does not print.  Even if I force black only in the preferences to print gray nothing comes out.  The print head moves back and looks like it's printing, but the page is empty.  I also ran the cycle of cleaning heads.

  Help, please!

  Cheers, Ben

  Hi all

  My question seems to get fixed after I ran a printer 'clean' options available.

  If you guys have this problem, why not try to clean?

  Concerning

  MY YEO

• HP Envy: Deskjet 3520 OXCO260000 TRTHREADSTOP C error Code

  My deskjet 3520 printer all in one is indicating an error OXCO260000 TRTHREADSTOP C on the display of the printer code. I was not able to find a solution for this.

  Hello and welcome to the HP @Peachy2community.

  I understand that you get an error message 'OXCO260000' on your HP Deskjet 3520. I'll be happy to help you.

  Here is a link that will guide you through the troubleshooting steps for the error message you receive.

  The system failure HP printers - print head problem, ink, ' 0 x... ' Display the error

  Please, try the steps and get back to me with the results.

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps. Have a great day.

• HP Deskjet 3520: Unable to connect to DJ3520 through remote AIO on iPhone after updating to IOS 10

  Since upgrading to IOS 10 on my iPhone 6plus, when I add my printer (HP Deskjet 3520) as my connection in the settings to use remotely AIO to print/scan I get the error message "No internet connection" in the application of remote hpprinter AIO. My internet connection is on, the blue light for the internet is on but it connects to the printer because he thinks that the printer requires security for the internet. I tried uninstalling/reinstalling AIO remote and also refreshing to the Internet is done everything to nothing. Help would be very appreciated!

  Well, after research through the forums, and not finding the correct information, I went to my router and found a setting "enable wireless isolation" which does not allow anyone on the network to see any other computer. Once I removed this setting, I solved all my last 6 months of frustration and not being able to print!

• HP deskjet 3520 scan copy main: print in black ink only

  does always change to print in black ink only, or is it possible to save it so I don't have to go properties, advanced to change

  Thanks robert

  Welcome to the HP community @robert3591,

  I read your post want to print in black ink only, from your Deskjet 3520 and how, you do not select this option, every time you print from your Windows Vista system.

  I would say to change the option to print in black ink only from "Devices and printer" to contain the parameter always print in black. This is a great detailed post from my colleague @X-23 , which shows all the instructions and screenshots:

  Re: I want to only print in black ink

  If there are any questions or problems, please let me know! I hope this helps.

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

• HPScan: Series of HP Deskjet 3520 printer not found >

  HPScan fails on 7 Windsows with the HP Deskjet 3520 series has not been found.

  I can scan to help start the analysis of the printer icon in devices and printers.  I can also scan from the browser to the printer (IP).

  I uninstalled and reinstalled the printer using HP Deskjet 3520 series.

  Some of the software is in Program Files, while the others are in Program Files (x 86).

  You have any suggestions on how to operate the HPScan?

  Hi @Barrry

  A few ideas come to mind. It seems that the question has something to do with the software. Let's first run the printer Installation Wizard because it could detect that something is missing and help to fill the gaps;

  Click here to download and run the HP printer install wizard for Windows

  If the problem persists, running the print and Scan doctor could help. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

• If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

• If you see a red X (), follow the onscreen instructions to fix the problem.

I can't wait to hear back on your part.