Deskjet 6940 bluetooth connection

Similar Questions

• DeskJet 6940: ethernet connection between the new modem and printer does not transmit Mac

  I just installed a new modem to Qwest; It works wirelessly with my iMac 10.11. My old (but functional until yesterday) Deskjet 6940 is connected to the modem via Ethernet. When I try to print, the document seems to be transmitted to the printer, but then it hangs on and I get the message "the printer is not connected" - which it is, plugged, ethernetted, and set in motion. Support of Qwest says that only 10% of the info from the computer are the printer, but he seems to think that the part of the new modem Ethernet is functional,

  I have already tried all unplug/restart/send/add printer new check/updates / IP (cannot connect) / ethernet ports and cables, etc.

  Any other ideas?

  Thank you!

  Hi @newgranny,

  Thanks for getting back to me.

  It is good that the printer has been able to print a diagnostic page.

  Ensure that the router and firewall on the market do not block these ports.

  • About the application firewall

  Ports of printing:

  • UDP ports: 427, 137, 161
  • TCP port: 9100

  Card photo upload:

  • UDP ports: 137, 138, 427
  • TCP port: 139

  The HP device status:

  • UDP port: 161

  Ports of Web Services:

  • UDP and TCP: 80, 443, 5222 and 5223

  Hello Ports:

  • TCP and UDP: 5353 and 5297, 5298

  Unplug the wired network (ethernet cable), restore the default values on the printer.

  Restore the default settings.

  Follow these steps to reset the printer to factory default settings:

  1. check that the printer is on.

  2. press and hold down the button to report Page.

  3 while holding down three times the homepage button, press the Cancel button.

  4. release the report Page button.

  Source

  • Restart the printer.
  • Connect the ethernet cable.
  • What were the results?

  If the problem persists, try the USB connection.

  Please reply to this message with the results. Good luck!

• DeskJet 6940 connected via ethernet to the airport cable, do not print

  Hello

  I used to run my HP Deskjet 6940 printer using a USB connection. I recently installed an Apple Airport Extreme so I can print wireless. If necessary, the printer is connected to the airport by using an ethernet cable and turned on the light green network. On the advice of a HP rep by phone, I uninstalled all old HP software and reinstalled HP software downloaded from the HP website.

  When I try to add the printer to my 'system preferences', it opens a panel that contains the following options:

  Protocol: Automatically selects "line printer daemon - LPD.

  Address: Empty but allows me to type in the IP address assigned

  Print using: no idea.

  More than two things: when I open the HP Device Manager and select "set up a network, information network configuration printer seems in good condition but the Manager does not allow me to 'apply'.  Not sure if this is important but no the printer utilities appear in my folder utlities since the new software download. Thank you.

  Looks like you are using a Mac.

  First of all, the driver for the Deskjet 6940 is built into Mac OS.  You really didn't need to download additional www.hp.com (sorry for the bad advice) stuff.

  Next, we'll check that the printer is on the network.  In Safari, select bookmarks, display all bookmarks.  Select Hello in the left pane, and then check the Deskjet 6940 appears on the list of devices on your network.

  Then, follow these instructions to reset the print Mac subsystem: http://support.apple.com/kb/HT1341

  Now add the printer to the Print & Fax under System Preferences applet by pressing the [+] button.  The Deskjet 6940 should be among the kind Hello from printers.  Select it and press Add.

  I think that should do it.

• How do for hp deskjet 6940's network light will light up.

  I just got a printer hp deskjet 6940. When I plug the ethernet to the printer the network in the back lights do not illuminate. I have the cable plugged into my printer and my router is a Linksys. My router on my computer works, but nothing clear to the printer.

  Thanks for the information. I continued re - connect the ethernet cable and the fire came finally. Thanks for the help.

• printer Deskjet 6940

  My office uses a printer deskjet 6940 and we are all networked to her. I started having problems with my printer, so I went to HP and downloaded a diagnostic tool and it fixed my problem immediately. When I ran the same diagnosis on everyone elses computer my colleagues have connectivity problems and I would like to know if I need to update the drivers or if there is a network problem. Any input would be appreciated.

  Updated drivers are usually a good thing.  Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• HP deskjet 6940 driver windows 7

  I have a job perfectly HP DeskJet 6940 but my SSD has failed and I need to reinstall the drivers for win 7 64 bit.  A year ago, they were still in line with instructions for installation.  Now the only driver is for a USB printer.  I don't remember how I connected the printer about a year ago.  Driver win 7 will work?  I have just to connect the ehternet cable and pray?

  Kind regards

  Ellen

  Hi Ellen

  First connect the printer to your network using an Ethernet cable.

  Then, enter devices and printers and click the Add Printer button.

  Select network connected printer and follow the steps in selecting the printer listed. the drivers are already included in the operating system and should install automatically once the Wizard completed.

  Kind regards

  Shlomi

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• Bluetooth connectivity on iOS 10 issues.

  Given that I have updated to iOS 10, my 6 s iPhone more does not properly connect to my car - 2007 BMW 530xi. I had no problem before updating to iOS 10.

  MY phone shows that it is connected and so does my car. However, my phone calls are abandoned at the beginning of the conversation. I answer the phone through my car, but it won't work for some reason any. Then I try to change settings of the speakers in my car on my phone back to my car nothing helps.

  Please do not ask me to try simple troubleshooting stupid as I did. I used iPhone and products Apple specifically for the iPhone 4. I know what I'm doing. It is only fair that iOS 10 broke some internal features regarding the Bluetooth connectivity.

  If anyone else has similar problems with their 10 iOS Bluetooth not connecting, please state so that Apple can precipitate a quick update. I can not even use my Bluetooth in my car which is very frustrating as I drive a lot for work and won't put on a helmet or something else on my ears while driving as it is useless for me.

  I have EXACTLY the same problem. For me, it's a 2016 X 3, but the behavior is the same. Devices think they are connected, but are not in force.

  I have reset my network connections, I disconnected and reconnected manually and some other stages of trials and errors. None have assimilated to the sustainable, stable connection I had with iOS 9.

• Bluetooth connect only to the Beats Studio wireless for 8 sec and no option in the audio settings.

  Any advice?

  Bluetooth connects to headphone listening Beats studio, but only for about 8 seconds and will not appear as an option in the settings of the sound or airtime. MBP 2011 using a dongle usb so I can use bluetooth 4. I tried with another pair of headphones bluetooth and same problem. Bluetooth dongle is comparable with my Mac Mini (2011). I use a thunderbolt to a display connection because the screen is cracked. The usb dongle is this: https://www.amazon.com/gp/product/B00F85ZPIY/ref=oh_aui_search_detailpage?ie=UTF 8 & PSC = 1

  (tried reseting the PRAM and deleting BTpreferences (.plist))   Thank you

  Try to reset the BlueTooth module

  Keep the change option keys > BlueTooth icon at the top right > debug > reset

• Music Bluetooth connection while the execution is HORRIBLE

  I've had my Apple Watch - sport watch 42 original - since the date of launch.  I use it all the time.  But from the beginning, I have known a glaring problem and a huge inconvenience: if I try to listen to music via bluetooth to a BT Headset activated during the running/jogging to Apple Watch, transmission is atrocious.  The music signal / autour jumps, there are 2-3 second lag, the signal falls completely, etc..  It does not work perfectly.  And the issue is NOT the BT headset.  The problem occurs on each BT headset, I tried: Dear and low-end models.  These same BT headsets work absolutely perfect w / my Mac and iPhone.  The problem is the watch...

  You can imagine how frustrating is: who wants to listen to music from the Apple Watch for BT headphones when he cut and in a few seconds.  So now, I end up using the Apple Watch to track my physical condition, but am forced to lug along my iPhone if I want to listen to music.

  Here's something very revealing on the signal low/inaccurate bluetooth from the Apple Watch: if I sit stationary or walking like a robot without arms or by moving the head, streaming works much better.  But this isn't a solution.

  How can I fix it?  Is it even fixable or is it just another glitch in the post World Steve Jobs...

  My brother-in-law has the same w/his Apple Watch BT problem whenever it tries to use it as a source of music during the race...

  Hello

  It is a known problem.

  It's frustrating, and it should be fixed. I have experienced the same problems myself.

  You can report it directly to Apple via Twitter: @AppleSupport

  Only one of the thousands of complaints across multiple sites to support > Apple Watch and the Bluetooth connection is terrible during my career.  Anyone else having the same questions?

  You can also provide your comments here > http://www.apple.com/feedback/watch.html

• you see only not texts in car bluetooth connection

  My husband recently got an iPhone 6 Plus.  In his Mercedes Benz bluetooth connection work and it can make and receive phone calls via his iPhone. However, it gets more texts displayed on the screen of the car.

  Previously, with his phone droid, there was no problem.

  Is it possible to get his text messages is displayed on the screen of the car?

  Apparently the texts on the screen of an iPhone are not compatible with his car. The concession and ask.

• Poor wifi and Bluetooth connectivity after iOS 9.3.1

  9.3.1 IOS is installed on my iPhone 6 wifi in my house guard fall!

  My Bluetooth connectivity keeps cutting to work! So annoyin!

  General suggestions for Wi - Fi problems, maybe one of them will help you...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (4) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• Satellite T130-11U, lost the Bluetooth connection after installing Mobile Broadb

  I recently bought a Satellite T130-11U and established a connection with my Nokia N82, using PC Suite.
  Then I installed my broadband Mobile (operator TMN) and lost the Bluetooth connection.

  There must be a way to overcome this 'conflict '.
  Anyone with the same problem?

  Thank you.

  Hello

  Perhaps this 3rd party application is not compatible and that is the reason why this happens
  But first, you should check if the Bluetooth is always enabled

  In addition, you should check if this issue happen after installation of the new BT stack

  Here you will find the new BT stack:
  http://APS2.toshiba-tro.de/Bluetooth/

  Welcome them

• quality of mediocre photo with Deskjet 6940

  My Deskjet 6940 has never been a regular BW printing problems, but I can't produce a decent photo. Impressions are systematically too dark with contrast exaggerated, grainy and often striped. I have a new photo cartridge that tests OK, adequate level in the color cartridge. I use Canon (weight 45) glossy photo paper. I can't find the Technologies of life real (?) anywhere on any screen. If I print using HP Photosmart printing or iPhoto problems persist.

  I have an iMac, OS 10.4.11, wireless to the printer, which is Ethernetted to my router. I use Easy Install software (from original disc) now, having struggled to get the OS X software install when I started from zero yesterday. Would it be useful to download the Mac OS software of 2007 on the site of HP? I can't distinguish the differences between 3 downloads of software available for Mac/6940.

  And the strangest thing: there are a few nights after several tries, I managed to print a few impressions absolutely perfect, wonderful!  The next morning, I could not and have not been able since to understand what I could do right.

  Thanks for your suggestions, answers.

  Bob, I guess I have to give up. Yes, the photo with the vertical stripes was in landscape mode. Changing the color cartridge to get rid of it, but now the printer seems to want to print just part of the picture, and that the part is not so great. I printed a test page when it started and I had an e-mail response to a query by using HP, but after 2 exchanges with "Eleanor" I heard nothing more; She asked me to print the test page and give the results of some lines by e-mail. I must have scared it by responding effectively as requested.

  I have so many variables to deal with printing - with the Finder, with iPhoto, with HP Photosmart, as I just can't play around with this any longer. I blown off50 photo paper pages (and bought another pack of another type that will now go unused) more new cartridges for photo and color (and my first photo cartridge was defective, so I had to return it to the store and I Exchange). And I still just 2 impressions nice to show it all.

  So phooey! I really appreciate your help, though - you get Kudos for trying! I think I'll see if anyone on the Mac forums has some ideas, but I'm about to burn a disc and go to the Pharmacy!

  Thanks again!

• Qosmio G20: Problems with mobile phone Bluetooth connection

  I am sure I posted this question a couple of days, but it seems to have disappeared. Anyway.

  I'm trying to connect my phone Nokia (N95) to my G20 via bluetooth, however every time I try to put in place the bluetooth software insists on trying to set up the phone as a modem. Now, I don't want it as a modem, just to connect while I can symchronise and save things, but I can't seem to find a way to set up the connection without the application process for the modem settings.

  If I have to configure the settings of the modem then it connects ok but fuck my internet connection to the site and if I disconnect the modem connection in IE my bluetooth connection disconnects as well.

  Can someone tell me what I am doing wrong?

  Thank you very much

  The installation of the Nokia Suite program is normally pretty simple. You must put in place by the Nokia Suite itself and not with the Bluetooth stack. Make sure that Bluetooth is running. A look at some similar HowTo on the following Web site might be useful:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html