HP Deskjet D2460: Printer SOMETIMES prints wrong colors. New black cartridge prints SOMETIMES?

Similar Questions

• installed a new black cartridge, colors are there, but should not the printer print again

  Photosmart e 5510 all-in-one

  Was completely out of ink installed new black cartridge, do not have color cartridges. Went to copy I get a blank page. The printer sounds like its printing. Purchased with HP printer cartridge

  I'm sorry that you're having this problem, but the printer will NOT work without the color cartridges.

  Even if you chose to print in B & W, the printer still need to use each cartridge colors to mix with black to make a true black color.

  If you put in the color cartridges before printing.

• OfficeJet 6500 new black cartridge installed, but print Brown (all colors) instead

  Hello

  I replaced the black cartridge in my OfficeJet 6500, and clicking on it.  (I triple checked it.)  However, when I try to print a document that is supposed to be any black ink, it prints in a Brown shade as if it is mix inks instead of using black-colored.   I printed a diagnostic page, cleaned and alignment of the heads of print and even restarted the computer and the printer.  Nothing helps!  I am still at work and I have documents that need to be printed!

  Do you have any suggestions?

  Thank you!

  What operating system do you have?  For Windows 7, you would go to start, devices and Printerss, right-click on the Officejet 6500 and then select Printing Preferences.  You can change the setting 'document Type' in the tab 'Features', then click on apply.

  The above will change the default value.  You can also change the print to a particular print job by selecting the print properties when you go to print.

  

• New black cartridge prints partially and light

  Installed new cartridges, all 3 colors and black. The colors are perfect! Black does not print. When the spreadsheet the test of my own running he print selected areas and very light, but not the entire sheet. I cleaned the heads and did the test sheet and there is no black who came through

  I guess that the printer is out of warranty?

  If so, you could try to soak the printhead as described here Bob...

  http://h30434.www3.HP.com/T5/other-printing-questions/Photosmart-premium-C309a-black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
  (2) remove all ink cartridges, then remove the print head Assembly.
  (3) gently put the printhead nozzles down in water and soak for 5 minutes.
  (4) remove the print head and gently dry the electrical contacts.
  (5) replace the print head in the printer and then reinstall the ink cartridges.

  BTW, you turn off the printer on the power button or simply unplug the wall?

  Do not print in black

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/black-not-printing/m-p/2926025

• new black cartridge will not print

  OfficeJet 6500 AIO e709a

  Windows Vista

  I installed new black ink cartridge. I made a few photocopies and had no problem. Today I can't print black at all. It prints color only. I did all the troubleshooting - cleaning the print head, align, print the test page, etc. - still no black. I went to Office Depot and got the black cartridge. Still can not print in black. I used the 'clean' tools of the printer itself print head and still no black. The replacement plan, I bought at Office Depot is a joke! They give me only purchase price. New printer like min (one year old, but was a fence) will cost me double, they will return! I would rather 'fix' it. Any ideas?

  Thank you!

  WELL, I'm RELIEVED! The reset worked very well and I am now printing in black! I agree with the person who said that this process certainly has HP - I used a lot of ink! (you know, this liquid GOLD!)

  In any case, I'm happy and enjoy all that have posted helpful advice/comments.

  Now, how can I mark this "resolved?"

• new black cartridge does not print

  I just installed a new black cartrdige of ink in my printer HP 6520.  It will not be printed.  I tried soaking of the thought of the cartridge it may be clogged.  That did not help

  This printer has been replaced once already because it has not previously.  Is there something else to try?

  The message here is a troubleshooting document links for the Photosmart 6520.  If steps it do not solve the problem, Please contact the HP Support, even if the printer is no longer under warranty.   If the foregoing is not satisfactory results so thanks for posting here.

• New black cartridge does not print - Photosmart 5510 all-in-One

  I replaced all my ink cartridges when they ran.  The black cartridge is printing not and cannot even print alignment test page to align my new cartridges.  They are HP cartridges I bought and now after all cleaning procedures, I have now exhausted all new cartridges.  My warranty is exceeded, even if I have not received the new printer last Christmas, but my family he registered in August when they bought it for me.  I'm going to buy new cartridges, but I fear that I will lose more money that this problem will not be solved.  Someone help.  I have uninstalled, reinstalled, cleaned print heads, tried to align the cartridges but error message appears then all new Board would be good.  Thank you

  Hello Cath,

  I'm really sorry to hear about your Photosmart 5510 aligning properly and not printing in black ink. I understand that you have tried to align the printer and it has not solved the problem. I want to help you and make you my best to do it!

  At this point, I do not pretend to try new cartridges (especially black) and trying to do the alignment again. I found a useful troubleshooting guide following which solves the problem, I hope.

  Here's the guide I recommend following step by step:

  A "alignment failed" Error Message appears on the printer

  * Tip - make sure that the printer is connected directly to the wall outlet.

  Please do not hesitate to post your results here and I will help you further if necessary.

  Take care

• HP deskjet f4580, new black cartridge: printer only print color, no black

  Just replaced the black ink cartridge in my Deskjet F4580 wireless printer.  Cartridges have been aligned by three times, and they have been cleaned.  When printing or copying, no black ink is used.  Why my black ink cartridge, apparently, doesn't?

  Here a link to a document that deals with poor print quality in your printer model. It will give you trouble shooting to try to try to resolve the problem you are experiencing with your printer.

  If you have reached the end of this document and have tried another cartridge in the machine. Sought to be the replacement of the product. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

• HP 3050 printer prints not clearly even after replacing the color and black cartridges...

  I have a problem on a HP 3050 printer all-in-one that is just a year old.  The printer is not used for several months and it was working properly before.  I tried to print a page and had missing horizontal print, I tried to clean the print heads and it did not help.  I replaced the cartridges with new ones and noticed that the ink levels showed that had the old cartridges.  Black was half full and the color was full.  It wasn't new purchased in-store cartridges refills.

  I tried to force an alignment page on the maintenance of the printer screen and this failed repeatedly, undetected alignment page.  I did some research and even tried to clean links them / connectors than cartridges fits.  Looks like that leaving the cartridges for several months in the printer was bad and that I'll need to ge a new printer.

  Thanks for the tips,

  plarr

  document here can help to solve the problems of print quality in your Deskjet 3050 has. I also suggest to clean the cartridge and printer electrical contacts as described in this document (for another series of cartridges, but same principle).

• New black cartridge inserted now my photosmart5510 printer will print not except in color

  It was a genuine HP cartridge and the ink levels are showing it's new

  Contact HP or check their website to see if there is a diagnosis or to test the process, that the printer can run to see what the problem is.

• "Print cartridge problem" with new black cartridges.

  For some reason, my printer reject print with this error all new cartridges. This printer is a HP Officejet 4500 G510g, and it's "901" ink that has the problem. I bought two cartridges of this type, new and apparently falsified with Wal-Mart. I tried to use both of them in the printer and it came with this error. Troubleshooting assistance, I can only find that I need to clean, I did then as directed. Yet none of them works. I don't know why, but they do not work. I don't want to erase Walmart on all of their ink cartridges to find a working one... Why am I having this problem? The printer do not error when I put the old cartridge back, so I don't really know where the shoe pinches.

  Apparently, my printer is out of warranty, which took end of February 2011, even if I bought this printer in September 2012. That in itself is meaningless, and I do not know where a party has to prove when I bought...

  I tried all of these steps, including the hard reset, and nothing has worked. But, I got a solution.

  Apparently, for some reason, cartridges, I had to come at Wal-Mart were not working and I went to Office Max instead bought one of there. Surely enough, it works beautifully. I don't really know why, but none of them worked at Walmart...

  It is not really of sense unless sold defective products from Walmart, but I know where to find ink cartridges in the future.

• new black cartridge does not work. I have no error message, simply, it does not print in black.

  As noted above, the printer prints just black.  It is a new cartridge.  Not my first rodeo, I replaced the cartridge several times, so I don't know how to do it.  I get no error message.  When you check the ink level, he recorded as complete.    What is happening with this?

  Hi, for the Olympic GAMES of 6500 try the procedure described in the link below...

  http://support.HP.com/us-en/document/c01641815

  Otherwise, if the printer is out of warranty, one thing that might be worth a shot is to soak the printhead...

  (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
  (2) remove all ink cartridges, then remove the print head Assembly.
  (3) gently put the printhead nozzles down in water and soak for 5 minutes.
  (4) remove the print head and gently dry the electrical contacts.
  (5) replace the print head in the printer and then reinstall the ink cartridges.

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M36315

• wrong color - new LR5

  Hi all

  I have a problem with a magenta as dominant in a new installation and freash lightroom color 5.

  I got lightroom 4 with the same problem, I have uninstalled and installed a new lightroom 5 but the same result.

  all my RAW images have a rose/magenta as dominant on color images.

  JPEGs seems!

  What is more, when I open in ACR, 8.2 (CS6) everything seems correct.

  From different cameras RAW files looks the same, so I don't think it's a camera problem. (canon and fuji)

  someone at - it ahead of what could be the problem here?

  using a PC win 7.

  First thing to check is the profile of your display.

  Change the default display to sRGB profile. The problem goes away? If Yes, then your display profile has been corrupted.  Redefine your monitor.

  If this is not the case, let know us and we will help you to solve.

• HP Deskjet 3050 printer color printing is disabled

  Original title: help, please!

  I have a HP Deskjet 3050 printer.  When I try to print colored ephemera that I bought and downloaded from Etsy, the color is off and the image lost its detail.  The downloaded images are in JPEG format.  When I consult the in file folder they are in, they look beautiful, but when I print, they are terrible and useless.  I installed new color and black cartridges and tried the digital paper.  Nothing helps.  Any suggestions?

  Hello

  What version of the windows operating system is installed in the computer?

  Method 1:

  If you are using windows 7, I suggest you to see link and check.

  Choose printing options

  http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options

  Method 2:

  I suggest you to see link and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02206095&lang=en&cc=us&TaskID=101&ContentType=SupportFAQ&prodSeriesId=4066450&prodTypeId=18972

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=130&prodSeriesId=4066450&prodTypeId=18972&ObjectID=c02109592

  See also:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Could not print black after installing new ink cartridge

  I installed the new black cartridge on my deskjet 3520. This is the original hp ink cartridge.

  also reinstalled the software of hp deskject.

  It shows even good condition here.

  but just no matter if I try to copy/printing, the printer started working and looks like it's actually printing, but after he gives me a blank page.

  

  Please can you me what should I do?

  

  Hi @Laviniania,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Deskjet 3520, you cannot print in black ink, you tried an alignment without success.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  If you are unable to print in black ink, I think that the issue may be the printer and not the cartridge. I highly recommend call you our technical support at the 800-474-6836, I'm sure they will be able to help you regardless of the status of the guarantee. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

  Thank you