DeskJet D2660: Help me. Urgent!

Similar Questions

• DeskJet D2660 - errors Windows 8.1 - don't Print - out

  Hello!

  I have a HP Deskjet D2660. I have a Dell

  Inspiron 15R 5521

  . I have Windows 64-bit of 8.1.

  When I try to print a document, or PDF printer will sometimes just leave the document in the queue and change the "status of mutiple symbols such as *! ^ #% ~ ~ * & instead of saying "printing error, deletion, etc...". Sometimes the HP Solution Center will send a pop up and tell me that the printer cannot print. Sometimes, I get an error of communication. But no matter, I am unable to print whole pages. When the printer decides it wants to print it will show 1/4 of the document and stop with a pop-up that says "unable to print document" Center of HP solutions also appears and says the same thing.

  I tried the "guided" solutions I stopped and restarted the "print spooler" from Device Manager. I have uninstalled and reinstalled my software to print several times as deleted and reinstalled all the drivers of hp associated with this printer model. I ran the HP program doctor. I used the "HP Updater" that tells me that there is no update and I'm updating. All this without result. I need a solution that works and I need it as soon as possible. I'm at the point where I'm ready to take this printer and run it with my truck because being able to print is a very important aspect of my office at home I prepare tax returns and must be able to print. I don't want to change the printer because the printer has always been reliable and does exactly what I need to do it, PRINTING of DOCUMENTS and. PDF files. But now it won't.

  Please help me to get this resolved as soon as possible! I appreciate all the suggestions that I have not tried!

  Knaus Tax Prep

  To solve the problem I bought a used HP F4180 and it works fine with my system. I guess the d2660 is just old. Thanks anyway!

• Deskjet D2660 printer: unable to print from your PC Windows 10 using printer HP Deskjet D2660 shared connected to Windows 7 PC

  Hello

  I have two PC Marge and Homer connected through a NetGear router:

  Margin: A Windows 7 32 bit laptop computer with an HP Deskjet D2660 printer and one scanner HP Scanjet 2400 attached to it. All these devices work perfectly well.

  Homer: 10 64 bit Windows desktop without devices.

  The two computers share their photos, music, videos and documents folders and printers via a homegroup. However, although Homer can see the printer connected to the margin, if I try to print anything from Homer, it fails. To give an example of this, if I print from 2013 word on Homer, the dialog box is shown below:

  

  

  At other times, on Homer, the item to be printed appears in the print queue, spool but then disappear. Moreover, I am aware of the problems of HP driver causing the elements to disappear with the disappearance of print queues in Windows.

  All the HP diagnostic software I tried did not detect the printer, perhaps because it is an older model.

  Can someone advise?

  Thank you

  Martin O'Shea.

  For the Dissapperaing of print job in the queue. Please follow the path below.

  Step: 1 Goto C drive--> Windows System32-->--> coil--> printers (right click and click Properties).

  Step: 2. under printer properties. Click the Security tab.

  Step: 3 Under Group or user name-> click on each one, then click on modify.

  Click on allow on all the paramaters (Permission) and then click on apply and then click ok.

  Step: 4 reboot the system and unplug the power cable from the printer without pressing the power button on the printer.

  Problem should be solved, it's usually because that computer allocates the permission for printing.

  I hope that this should take care of the concern.

• HP deskjet d2660

  My hp deskjet d2660 has been installed for more than a year and some of the works of the time very well. However, most of the time it does not print. The computer says it's printing but it prints normally until the computer is turned off, then a few minutes later prints all pages the last time it was closed. Unfortunately, he ceased to do this... now, it doesn't print at all and there is no error message. All solutions?

  HI, go to www.hp.com/go/tools and download and run the print diagnostic utility you. He will check the most commen problems and fix them if possible.

• DeskJet D2660 on Snow Leopard?

  Hello

  Im trying to install a Deskjet D2660 on a MacBook running Mac OS x 10.6 (Snow Leopard), the printer installs and is recognized by the machine even tell you that the printer door has been opened or a new cartridge has been installed and needs alignment, but she won't let you go further with the alignment, or it will allow you to print.

  Snow Leopard apparently has this built-in printer drivers, but the last person who tried to install this printer on this machine admitted that they had installed the CD while trying to make it work.

  Any Suggestions?

  See you soon

  Fraser

  Edit: The printer prints perfectly on my machine windows 7, so im pretty confident the printer works well.

  Unless your CD says it supports in particular 10.6 Snow Leopard, you must uninstall the software No-10, 6 by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.

• HP deskjet D1660 and deskjet D2660

  Hello all, I am planning to buy a new hp printer, my selection were hp deskjet D1660 and hp deskjet D2660 because of their price and their design and their ink is affordable, can someone tell me the difference of this two printer because the printer two has almost the same features than what I read, the difference that I see is that D2660 has a low-ink indicator other than can someone tell me the difference between these two printers except on his conception of the physycal?

  Thanks in advance...

  I don't know if this link will work for you, but the HP store made a comparison side by side the two products.

  http://www.shopping.hp.com/webapp/shopping/product_comparison.do?storeName=storefronts&landing=printer&category=Deskjet&lanAttr=&subcat1=photo&leftNavIndicator=&PROD_LIST=CB770A%23B1H%7CCH366A%23B1H%7C&catLevel=1&brand_name=hp&sort_list=Black%2Bspeed%257CColor%2Bspeed%257CBlack%2Bresolution%257CColor%2Bresolution&hide_clear_link=1&compare1=Compare+Items

  Looks like the D2660 printer better when you compare the specs, but the D1660 has a higher rating of customers.

• HP Deskjet D2660: All prints gives blank Pages

  Hello. We have long used the faithful D2660 to print labels for shipping mostly in black and white. We recently used not printer in over a month, and upon his return, is having problems printing.  It was unusually hot in England during that period and may have caused the problem is perhaps remarkable?

  All attempts to print blank paper to return. The printer goes through the usual movements of printing, but it seems that there is no ink coming out of the cartridge.

  I tried...

  • Insert two offical cartridges with ink left and who does not. The first two were seen correctly make the ink and the third was also properly don't not have ink. It can identify how much ink is left in a cartridge.
  • The toolbox using automated "To clean the print cartridges", "defamation cleaning Page back" and "Test Print-document". Nothing has changed and it printed a blank page.
  • Move the printer cable
  • Grayscale (who oppose black ink only) and checking the size of the page.
  • I have already used the printer on Ubuntu. I started a live CD and tried to print from there, but again without success.
  • Installed the latest drivers from HP.com. It does not appear to say something wrong with the printer.

  Hello @ZackR,

  Welcome to the Forums of HP and thanks for posting!

  I want to help you with the problem of blank print you are having with your HP Deskjet 2660 printer.

  Thanks for the detailed description of the problem and the steps you have taken to try to solve it. Looks like the ink in your cartridges can have dried in the hot season (this is especially likely if you have had their printer output).

  I would recommend looking on the steps in this document, to see if there is nothing, you may have missed:

  HP Deskjet D2600 series printers - troubleshooting print quality issues

  If the problem persists, I strongly recommend replacing your cartridges, because it seems that the printer itself works fine.

  I hope this helps!

  

• DeskJet F4580: help! DeskJet F4580 no USB cable wireless configuration!

  Hello!

  I recently got an opportunity of HP Deskjet F4580 of my university degree all-in-one wireless printer and I can't understand how to set up for printing. The person who gave it to me had more the USB connector, but they said I should be able to put it up though as it is a wireless printer.

  The problem is that all of the messages that I found on this issue, said either connect manually to Wifi using a USB cord, press the WPS button on the router for a long time until it the printer automatically connects to the router (I tried this and nothing happened), or press the wireless to the printer and then connect to the wireless connection , it emits and then use this method. The question ultimately is that even if I am able to get the flashing blue wireless key none of my devices wireless recognizes the printer as a wireless network (at least not as far as I understand).

  I tried to set up since yesterday and I'm really mixes responses to what I should do. Can someone please help me solve this problem?

  Thanks in advance

  Yes you will need a cable to USB printer like this.

  https://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_1?s=PC&ie=UTF8&QID=1471960536&SR=1-1&keywords=printer+USB+cable

  Then, download and read the Guide here...

  http://support.HP.com/us-en/product/HP-DeskJet-F4500-all-in-one-printer-series/3944755/model/3944756/manuals

  and follow the instructions to connect through the connection of Tradional wireless.  Only insert the cable when the software tells you to do.

• {{Help very Urgent need help please}}}

  Hi Experts,
  
  We urgently need a help from you all, Apologise for posting this simple question, but left with no option.
  
  Can you please let us know if there is a quick way through query DB or the java code to find duplicated in IOM user accounts. We urgently need the data as we have it
  to update our client and perform a cleanup.
  
  We use IOM 9.1.0.1 and there are several user accounts created for the same as users e-mail addresses even tag multiple accounts of users etc.
  
  We have assigned unique employee id, but do not know if it is updated for all users.
  
  Pulling the full report in table USR DB Extract all records, but you are looking for a good method... like the questioning of users with the same Fname, name etc... Please
  Let me know as soon as possible.
  
  Concerning
  SS

  Really depends on what you have for unique identifiers... If you want just a report of all users with the same name and first name:

  select * from usr a join
  (select usr_first_name, usr_last_name from usr
   group by usr_first_name, usr_last_name having count(*) > 1
  ) b on b.usr_first_name = a.usr_first_name and b.usr_last_name = a.usr_last_name
  order by a.usr_first_name, a.usr_last_name;
  

• Help. URGENT error 'no photo not found to import.

  I work on a program of commemoration and urgently need to import the scans and other images with different dates of creation, an external drive in LR2. Each time, by all means import, I get an error 'no photo not found in import' but three of 82 photos I need. The three that matter successfully are digital photos were taken the same day, a date which seems to be randomly dates different probably 15 or 20.

  I tried several options "File management" and "copy to: / users/name/Pictures" and "arrange by date: [date] ' and various other combinations.

  How can I solve this problem? I'm not new to Lightroom, but I've never had this problem before. A number of other users having the same problem, I saw in the forums. In each case, the problem is not resolved or if it was, I was unable to track a solution for the glitch that I am experiencing.

  It seems to me that Import should not be so difficult for any help is welcome!

  Winsen

  Huge means more than 65,000 pixels on a side, which I doubt you have.

  You have all the strange characters in filenames - i.e. non-alphanumeric ones?

• Browser does not open! Help! Urgent!

  Hi people,

  It's kinda a worry! Started this morning when I called Virgin Media on the use of a 5 GB connection... (At this point Firefox worked just fine...) as part of the 'process' before we get to talk to a human being, they run 'tests' on your connection.

  They could not really help with my request, and when I got the phone to them I restarted Firefox.

  I got was a screen saying "connecting"... leave it for ten minutes - still the same. Screenshot attached.

  I was on the phone to Virgin three times... what they're saying is 'it's a browser problem"- the internet connection is fine!

  All I know is that I can't use my chosen browser!

  Anyone have any ideas? Thank you!

  Solved! It was a conflict with the remains of AVG that has been uninstalled!

• Atrix 4 G even not start: HELP NEED URGENT

  I went to sleep with on her phone charger...

  Now its not even start

  I have tried everything, from battery, reset (Volume down + power)

  WHEN I PLUG IN MY POWER CORD... SEEING GREEN FLASHES AND FLASHES... SHE'S... NOTHING ELSE

  I'M TENSE EXTREEMELY...

  I don't know what happened in my 2 hour NAP

  1. my battery will be distorted,

  2. If my phone is wrong, motorola will repair (am willing to pay even a hundred dollars)

  3. I love this phone and I don't want to lose it... Please help

  Try traction battery as suggested...

  If your phone does not have a problem, call AT & T - they will replace it if it is under warranty. You can always go into an AT & T store and see what they say.

  If your phone has been changed in any way?

• MSN MAIL ACCOUNT RECOVERY... Help! URGENT!

  My msn.com email password was stolen and I've been unable to access my mail.  I received a ' update of the recovery password for e-mail account at 04:00 this morning saying my account has been validated the info I had furnished them yesterday and that I would receive a LINK to RESET PASSWORD in the email I have them furnished... * address email is removed from the privacy * is now 1045 EST and STILL NOT RECEIVED a LINK WITH OTHER EMAIL PASSWORD!  How long does it take to get?  They also mentioned that he (e-mail) would expire in 3 days - IS - this? they give me a #1151803774 CASE.   I desperately need to access my mail as I drank it. ACCT info in there, I need NOW!  Help, please!  my blood pressure is soaring and Ive spent hours on this computer and got nowhere!     use different address above plea\se... THKS!          PR

  Hello

  I'm sorry, but we cannot help you with your problem in these forums of vista

  You should continue with your correspondence with Microsoft who you see before posting here

• have a HP deskjet D2660 printer in devices and printers it shows D2600

  I can't get my printer to work.  I tried to go bad and in devices and printers, there my default printer like D2600 but it is actually D2660 so it won't work. I don't know when it changed, or what.  How I can get it to the printer, it is supposed to be?  Thank you

  Problem solved.  Thank you

• Please help - need Urgent read MCC.

  First of all Hello.

  I developing a dialer application for the telecommunications company, that I work for, to easilly allow our users to call through our network (we sell cards call and the phone through a number of carrier selection which must be dialled before the destination). The problem is that I am in need to read the MCC code from the telephone network, the user is saved so that I can detect if the topic is on homelessness, and what country the user is currently in order to call the correct number to reach our switch and router properly, but also to load correctly.

  I tried to use getNetworkOperator() of TelephonyManager, but it returns an empty string. I also tried other methods to get the country (all TelephonyManager), nothing works.

  If anyone can help, I would be VERY grateful.

  Kind regards

  SK

  Hello

  Welcome to the forum!

  At the moment I can not test, but on Android devices, there is another method for the mcc and mnc news.

  Of your business, you can try the following calls:

  getResources () .getConfiguration () .mcc

  getResources () .getConfiguration () .mnc