Deskjet RJ45 HP6122 ethernet connector

Similar Questions

• Need for Yoga 20175 13 Ethernet connector

  With the help of Yoga IdeaPad 13, model 20175. I need an Ethernet - plug - as there is no WiFi in our office. What to use?

  You can buy a USB adapter Ethernet from Amazon, for fairly cheap. I bought one for my Yoga 2 Pro and it works like a charm!

• Cannot install ethernet on Satellite 1710 CDS

  Hi, I have Satellite 1710 CDS.
  This laptop has RJ45 wording "Ethernet" connector on the rear side.

  In my book there is not written anything on the inbuild ethernet card. Photos of manual shows back of laptop, it has drawn no ethernet connector, but my laptop has had! Is this possible?

  Why toshiba is not talking about ethernet in the manual for CD of Satellite 1710 and my 1710 has? I don't understand.
  Windows ME cannot recognize this net adapter. I don't know what drivers should I look for. Please help me or give me advice. Thank you.

  Hello

  Sorry, I have you dissappoint! Satellite 1710CDS has NOT built in LAN!

  The cover has only a black RJ45 model at the backsite without function!

  :-(

  Rudi

• Satellite U200: lost ethernet RJ45 connector

  On my brand new U200-163 the RJ45 ethernet connector can up and down to about 1 mm. The connector is not tightly screwed into the chassis or motherboard. U200 owners, it's the same and normal with your machines?

  Thank you for your answers and sorry for my broken English.

  Hello

  Well, on my Satellite (not U200) connector LAN doesn't move up and down.
  I put t know why it moves on your laptop. Possible that a screw loses a little.

  Your device is new and the warranty is valid. You could ask the service partner for more details.
  But in my opinion it of not a serious problem and 1 mm move is not worth mentioning.

• Ethernet port doesn't work - posted the solution don't DO NOT WORK

  All of a sudden my Ethernet connector on the iMac has stopped working.  It is NOT the cable, as I plugged into another computer and the other computer connected without problem.  I did the fix published on the pages of mac support trying to update the Configuration data of the kernel Extension Incompatible.  The support position familiar updated to version 3.8, but mine is version 2.13.  I did the fix explicitly four times, and I still have no Ethernet connection. WiFi is fine. Yes, I restarted everything.  Nada.  Help!

  I'm on Mac v10.11.6

  Hi, so he worked before in 10.11.6?

  What is the exact name of this extension?

  Recently storms in your area?

• Can I use the lan Ethernet port on the airport express to the release of music?

  Can I use the Ethernet connections on airport express at the exit of music over wifi to a set of speakers? I would use an Ethernet connector at one end a DIN 5 pin to a pair of speakers beolab 2500/2300. I don't want to use the PIN audio output on the Airport express, as it is analog. Possible music out through one of the Ethernet connections at the back of the Airport express? Thank you

  Can I use the Ethernet connections on airport express at the exit of music over wifi to a set of speakers?

  Sorry, but no.

  I don't want to use the PIN audio output on the Airport express, as it is analog

  Perhaps you weren't aware that audio port on the AirPort Express audio book Terminal analog or digital, according to the type of connector used. See this link on the AirPort Express specifications to confirm... http://www.Apple.com/Airport-Express/specs/

  In other words, for the Express deliver audio analog, connect a standard stereo mini plug with connectors appropriate to the other end.  To ensure that the Express deliver audio digital, plug a mini Toslink cable to the audio port on Terminal AirPort Express.  An example is in this link... Airport Express Toslink - Amazon.com

• New Port USB 2.0 with digital video duplicator - what is Ethernet at the back the port used for?

  Received last week, plugged into my W500 (Windows XP Professional) - seems to work very well, but I'm mystified by the Ethernet port on the back of the replicator - that is it for?

  I'm sure it's a simple question with a simple answer, but I don't know what to do with this port - does not seem to make a difference if a network connection is connected to this port or not?

  Thanks in advance for the help.

  You can download usb based ethernet dongle. The ethernet on the port replicator port simply acts as a your computer's ethernet connector.

  The point of having a port replicator, is that it acts like a Replicator of ports on your computer.

• You want to connect laptop that is only temporarily used wireless to Ethernet connection...

  This seems to be a simple question, but again I received conflicting answers.

  I have a laptop (Toshiba Satellite U305-S5077) running Vista HP SP1.   The office that is connected to my router has developed age problems; He ran Xp2.

  If I want to connect my laptop via Ethernet temporarily for example to change the settings of the router, I have to manually disable my wireless connection, firstly, and then he reactivate manually after disconnecting?

  A source said that Windows does NOT automatically, to ensure stability & connectivity, this should be done.  Another source said no need.

  In short, can I just plug my laptop into the Ethernet without do something else first?

  Your recommendations?

  Thanks in advance for advice and counsel.

  MWQ133

  My recommendation would be to disable the wireless device when you use the wired Ethernet connector. Brian Tillman [MVP-Outlook]

• How to replace the Ethernet adapter internal of an IBM ThinkPad T60p

  Several IBM ThinkPad T60p. unfortunately I have a ThinkPad shows in the BIOS "(internal network) MAC address: 00 00 00 00 00 00' and sometimes ' 02 00 00 00 00 00". The Green LED next to the Ethernet connector is also dark if this laptop is powered (adapter attached) and a network cable is connected. That's why no Wake on LAN is possible. To my surprise, the network card works under Windows and there is also a MAC address. Wake on LAN is also possible in Windows.

  Because all the BIOS settings and also the BIOS version are exactly the same on all the other ThinkPads IBM T60p I think there is a problem with my internal Ethernet card.

  Anyone know if it is possible to replace this internal Ethernet card? I ask because I also have an IBM ThinkPad T60p, which is broken and that's why I intend to Exchange Ethernet adapters internal if possible.

  I think that they are integrated on the MB, so it's not possible

• Sites Web open do not, but other applications internet like Skype, viber, messengers works very well

  Hi guys,.

  It comes to Nilesh, I really need help in this case.

  Since last week, its been observed on my Dell Inspiron 3521 to i5 with HDD 750, 4 GB of RAM (Service Tag # ), that in spite of the use of 10 Mbps ethernet speed cable, the site does not open unless I restart the computer each time but other applications such as Skype video calling, viber works very well, the torrent files are also downloaded great at high speed.

  What I've done so far-

  (1) the connection on the router - OK

  (2) RJ45 Ethernet connector was broken - fixed.

  (3) Firewall setting - ON (default)

  (4) I've restored the system as well.

  (5) Avast Anti-virus manually installed on my PC and its ON 24 / 7 and I also scanned my computer and not threats that will find there also.

  (6) my system is up to date, I have downloaded a few applications for the Dell software update on my 3521. So, it updates the new versions automatically and automatically restarts the computer.

  (7) I have tried to connect my laptop directly with the cable coming from the wall too, still the same problem.

  Despite all this, the only problem Im making ' is difficult, impossible to open the Web site. I can open the Web site but only when I restart my laptop and that too for only 10 or 15 or 20 or 30 minutes. After that, one more time of site question. I mean, the Web sites stop opening after 20-30 minutes.

  Some of my friends, colleagues suggest me to get the laptop formatted.

  So, my request here is, do I really format my C drive? If there no need other alternatives, please please please share. (but, before that, please read everything that I did on my 3521 far to avoid a repetition)

  If other than all of the above, and if I need to format my C drive, let me know the procedure of formatting PC which I think will be clean the PC and start from scratch. So far I got the backup of my C drive to the D drive.

  I would appreciate your help in this matter, as its so frustrating. I hope you understand my situation here.

  Thank you very much!

  Nilesh

  Hey you!

  You simply Rock buddy...

  What a most satisfying to your precise support of bar.

  I followed the steps you told me, and I was able to download successfully from chrome and mozilla firefox, as well as the software application anti malware free one that told you me... and did a quick scan by your suggestion. And, guess what, there were approximately 136 flaws that I deleted the system. (BDW, digital defects had a few registeies also, but not sure if I did it correct that I removed, could you explain me basically what it is, is it a virus or what and how is it that night my computer?) Just for my tech knowledge.)

  Now, my system works like a butter on a roll. You just need a raise!

  G $ thanks to you, Ricki.

  Nilesh

• HOW THE AIRPORT TIME CAPSULE WIRELESS NETWORK IS PROTECTED?

  I implemented the airport Time Capsule, using a DSL modem connected to the internet as its bridge.  MacBook Pro was used for initial set up by the bolt of lightning to Ethernet connector and then disconnected and works perfectly.  Now, I would like to use Wi - Fi for my Samsung phone not iOS.  On the Samsung wireless I connect to my home network using a password.  Well, I don't think that a password was never set.  How can I configure my wifi at home to establish a password?   I don't think that the modem settings should enter in solving this for me, but I'll add that the modem required a static IP address be entered for this connection when its router features have been disabled for the connection of bridge.

  If the Time Capsule (TC) provides the wireless network, then you can secure it using AirPort Utility, as follows:

  • Run the AirPort Utility.
  • Select the TC and then, select change.
  • Select the wireless tab.
  • In the wireless security, select the type of security. I highly recommend that you choose: WPA2 Personal
  • Enter a password in the field password wireless. Enter the same password in the verify password.
  • Select Update.

  

• Feature WiFi?

  I have a desktop Compaq Presario S5000J age of seven year with an ethernet connector RJ 45 and a VIA Rhine II ethernet adapter.

  Windows XP Home Edition with service pack 2

  This old computer is capable of a wireless LAN?

  There is a switch of zipper on the front of my HP DV9700T laptop to turn off wireless.

  Wired is safer.  A router/hub wireless or not will add another layer of secuity (dynamic firewall protection).

• need help to set up Time Capsule with hub of sky

  Hi, I bought time Capsule and followed the instructions re. Connection cable internet hub in wide band directly on port WAN on TC. And yet nothing is happening outside orange flashing and message of airport utility saying it could not connect to the internet. I bought an Ethernet cable, just in case and tried to connect it to LAN to LAN, and I was able to create a 'network' but always seeing flashed. Can anyone help? Thank you!!

  El Capo can be really rotten networking.

  The skyhub is a router... I think it's okay... If you connect a computer directly into it, you should have internet?

  The TC may work very well in this configuration.

  Ethernet connector of skyhub LAN WAN TC as you did originally... correctly.

  So I highly recommend ethernet to the computer... because it helps no end. And even to pass the airport utility to use ethernet instead of wireless.

  Here (if obvious really that you would have ethernet under other Wi - Fi... don't know why I found totally by chance?)

  

  The configuration... make the TC must go to bridge mode...

  It is Off (bridge mode) on the network tab.

  And you need to create a wireless network with a different name to the skyhub.

  You can probably do it manually now without too many problems.

  And even without ethernet connection... Although reliable then ethernet is streets ahead wireless.

  Click on the TC icon in airport utility.

  

  Click on change... at the bottom right on the summary.

  Now you can fix it up. Click on the network and make sure that it says Off (bridge mode) I posted my configuration, but you do not follow that... I just allows you to see where everything is.

  

  Click on wireless and fix that up.

  

  You can even click on the base station and correct the name and the master password... so that all the names are short, without spaces and alphanumeric pure.

  NOT RECOMMENDED APPLE NAMES that are FALSE.

  If you have an ipad/iphone the iOS version of the utility is often better to get this right than the Mac version... particularly in the later version of the Mac OS.

• States of FAQ lapdock 500 features only works on one phone, please confirm

  This is almost entirely devoted to the brand, but anyone can answer if they know.

  According to the FAQ (whicle looking for everything related to the 500 lapdock), he says the following...

  Q: which phones can be connected to Lapdock Pro 500?

  A:

  • DROID Bionic
  • Photon 4G
  • Atrix 2
  • DROID RAZR
  • Motorola RAZR

  So far so good.

  now, it indicates what follows after that...

  Please note that at the time where the Lapdock 500 launched , the following experiments work only with the RAZR:

  • Ethernet connector
  • Webcam
  • VGA connector

  If this is true, then I'm wrong to assume it is not not even useful to the lapdock 500 for the Photon (or any other other than the Razr phone?

  You can mark or anyone with access to the ups higher than Motorola, confirm this claim of the FAQ, and or to know if an update will be introduced which will allow these features work with the other webtop phones activated.

  TS

  Hi twospirits,

  Thanks again for your interest in Motorola and Webtop/Lapdock products!

  The instructions in the FAQ are correct. At the moment only RAZR products fully support all the features Lapdock 500.

  As you know the phones all the features of Lapdock drive and at the time of its elaboration and launch of the 500 Lapdock products you mention Bionic, Photon and Atrix 2 had already been available on the market.

  We call these products wiith these Lapdock 500 features listed there and when updates are available for these phones we will not fail to mention their support for Lapdock 500. In the meantime Lapdock 500 will work correctly with these phones for all other aspects of the dock.

  Kind regards

  Peter

• The CRIO-Ultrabook connection

  I have a Vaio Pro, but it doesn't have an Ethernet connector. Sony offers a wireless like this solution:

  SONY VGP-WAR100 VAIO Duo13

  If I connect the cRIO in this port of the device, I can configue it without problem? If someone has done this?

  I want to know it before you buy it.

  Thank you

  Hi good morning vitrion:

  You can connect cRIOs to any wireless router and configure them correctly. We haven´t has worked with this particular wireless router, but based on the specifications on the Web Sony´s is a regular wireless router. You can use any wireless router to configure your cRIO.

  I hope this works.

  Have a nice day