States of FAQ lapdock 500 features only works on one phone, please confirm

Similar Questions

• I have recently upgraded my MacBook Pro and Adobe creative suite 6.0 on the former. It of maybe a stupid question, but how do I get the software on my new MacBook Pro? My understanding is that my serial number only works with one computer at a time?

  I have recently upgraded my MacBook Pro and Adobe creative suite 6.0 on the former. It of maybe a stupid question, but how do I get the software on my new MacBook Pro? My understanding is that my serial number only works with one computer at a time?

  Hello

  You can install a copy of the software on the second machine it's just you are authorized to use on one machine at a time.

  You can check: how many computers can you install or run Adobe software on? ProDesignTools

  End user FAQ license contracts

  Please visit the given link to download CS6: applications download Creative Suite 6

  Concerning

  Bianka Attre

• HotSync only works in one direction

  I recently moved from a PC running XP for an Imac OSX 10.5.

  I have a Tungsten E and install Palm Desktop 4.2.1 installed on Imac, open when the connection active.

  HotSync seems to work well, with no error message in the log, but looking at the result, sync'ing of the calendar is only went in one direction. A new entry in my handheld was transferred to the Imac, but a new entry on the Imac did not appear on the handheld. This never happened with the PC, in that any new entry was Sync, regardless of where it was entered.

  Any suggestions to make it work in both directions are welcome! Thank you, Alfred

  I've got it-, I think.

  For some reason, my name (the only authorized user) not was not entered in the part of little 'user' on the bar - just a message "no user". Once I fixed that it works very well! I have no idea why it didn't recognize me from the start, but I tried to synchronize both ways since then, and it worked fine.

  Thank you guys for pointing me in the right direction - I had not advanced far enough in the manual to understand how to set up.

  Cheers, John

  Message relates to: Tungsten E

• Reviews Wi - fi only works on one floor?

  I have U-verse internet - using a router/modem Arris NVG599 - have five rooms in my house that are wired with a wire CAT5 that connect to a switch is connected to the router. All this is in the basement of a three-story house, and I use Airport Express - on the main floors and albums – to extend the wireless signal. (Old House, mix of plaster and plasterboard walls.)

  I turned on the Wi - Fi of comments last week, only access to internet. I could see and connect to the configuration without comment thread in the basement and first floor, but when I went to the bedrooms upstairs, the network wi - fi comments either does nothing or it shows and continues to request the password.

  I compared the two Airport Express'- and can not find if there is a setting on one and not the other. I think, at this stage, there must be a problem with one of the Express signla' which is blocking or does not connect to the comments Wi - Fi network. Any ideas/help/solution would be much appreciated.

  I have U-verse internet - using a router/modem Arris NVG599

  Is that your Arris routing gateway works with disabilities? In other words, does bridge? Comments from Apple base stations network functionality requires that the 'main' AirPort base station is run as a router. If the Arris is also doing so, then you'd have a status of "Double NAT" and maybe another problem to deal with.

  Here are the basic requirements for Apple customers networking:

  • You must have an AirPort Extreme (3rd generation or later), Time Capsule (2nd generation or later), or a Terminal AirPort Express 802.11n (2nd generation) base station. All the base stations must be running firmware 7.6.3 or higher.
  • The 'Assistant' utility 6.3.x AirPort should be used to implement the 'extension' of condition factory default installation airport.
  • The 'main' AirPort base station must be configured as your main router as a bridge.
  • All devices "guest" will be on the same subnet 172.16.42.x... Failure to Apple for the 'guest' network

• Satellite T110-11U - WiFi only works in one piece

  WiFi on my LP used to work perfectly in every room of the House, but since I installed Norton Antivirus it works in my room (where is the router) and nowhere else.

  However, other laptops work well in other parts. I thought is was because of Norton Antivirus and I reinstalled it, but this did not help. It is already 3 months since then and my LP only gets the signal in my room. Then he had a problem to get the signal even in about 3 meters distance. I already checked the router wirelessly with the provider, and there is no problem with him. The problem is in my laptop. I've updated the drivers, but not luck. I have a Toshiba Satellite T110-11U, Windows 7 Home Premium.

  If anyone can give me any advice in this regard would be very appreciated!

  Hey Buddy,

  Maybe there are still some registry keys for Norton Antivirus stored in the Windows registry, I would try a registry cleaner like CCleaner. It is freeware tool really nice to clean the registry.

  Which WLAN card driver is installed for the moment? Latest WLAN drivers can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

• I have two devices gpib-usb-hs; two of them work in MAX, but will only work in labview, help please?

  Hello

  For my application, I need to communicate with two instruments by using both devices gpib-usb-hs. I use Windows XP, Labview 6.1, MAX 5.1 version and NI488.2 version 2.42. I checked and this ni488.2 driver should be compatible with my devices gpib-usb-hs and my versions of windows and labview. I also tried versions older and more recent NI488.2 without success.

  I can communicate with my instruments properly in MAX, tell me that the devices themselves are functional. When I try to connect with my instruments using labview (using the example of gpib of labview), only devices gpib-usb-hs communicates with success. The other device returns the EDVR error: connection to the device or driver error.

  I don't really know where to go from here. The only thing I found strange was that the gpib-usb-hs work was has an alias name assigned visa while the unworking device does not. I tried to give him an alias name, but this did not help.

  Any suggestions would be greatly appreciated.

  There are many free tutorials on GPIB. It should explain how the various instruments can be connected to a single controller.

  That being said, even if it's unnecessary, you should have no problem with multiple controllers on the same pc. The two being connected, they pass all the tests in MAX? You are using an old driver and seem to have tried several different versions. I suspect a driver issue, and I advise you to uninstall all the drivers GPIB and VISA and then start again. But not all necessary can be done to satisfy your curiosity.

• Satellite Pro 6000 - pc wireless card only works in one slot

  Hello

  I have a problem with my wireless pc card.
  It works in a slot, but when plugged in the other it gets stuck on acquiring network address.
  Is it possible to fix it, or are the two different ports.

  Hey Buddy,

  According to the manual the two slots is normal PC card connectors so that the WLAN card should run in both slots.

  But why is it so important that map PC works in both slots?
  You have another PC card that you can test in the second slot?

  What operating system you are using and what WLAN card is it exactly?

• Indent the code of the toolbar only works on one side of the split Code window? CS6

  Any ideas how to leave the button remove on the toolbar of the current active window to edit the current active page?

  I've never used Code from Split before, so I did play a little.

  It certainly does not go as planned in the PCOC either. Hit the button indent/increase twofold does affect that the first matter that choose, or how I highlight the code in the second pane. Flipping the flaps to split horizontally does not affect the behavior either.

  I found a solution that I hope will work for you fine. Open the Code inspector window (window > Code Inspector), rather than running the Code split under the notice. If you spend your css in the main document window, the CI will always show the actual page code, you work and the two windows dash/raise buttons work correctly (in CBWMS anyway). You also get the added benefit of being able to move the CI on a second monitor, outside of the Application in order to give you more real estate for the design or Live View split with code in the document window.

  I suggest you submit a bug here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  However, I'm not too sure if anything they would provide for DWCS6, because it is not the current version and that the issue is not likely to affect a large number of users as some of the other bugs they have worked on since CC came out.

• CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 does support OpenCL and OpenGL?

  Are all features that CS6 supports for NVidia Cuda available for the M6100 OpenCL?

  Bill supposed to first Pro CC (not CS6) response. Windows of Premiere Pro CS6 version does not support OpenCL for accelerating GPU of MPE. Therefore, there is no "opencl_supported_cards.txt" file in the folder of Premiere Pro, and the code to OpenCL is disabled permanently in all versions of Windows from Premiere Pro CS6. So, for your over-pants M6100 Premiere Pro CS6 will be permanently locked to only software MPE mode. (Acceleration GPU of MSES in the Windows of Premiere Pro CS6 version is limited to the CUDA only, which means that only NVIDIA for GPU - no AMD over-pants or GPU Radeon support CUDA at all.)

• I've updated to Firefox, The Free Dictionary has lost some essential features, cannot get back them. The DFT now only works in English. What should do?

  I updated Firefox to 10.0.2 and lost the functionality of The Free Dictionary. I reinstalled TFD, but now it only works in English. Say I read a German Web page, highlight a Word, the dictionary will seek in the English Dictionary. Before that I had all the versions I needed, and the dictionary automatically in the right. And before that I could have the toolbar installed, now there is no option for this either. What should I do?

  Maurizio salute, I asked you to a problem with the free dictionary. I found the solution, which in fact was not technical. In case someone else has the same, that's what I did not understand: when I highlight a word in a text in a language other than English, the dictionary gives me an explanation in English, i.e. 'not found word', but when I then press 'Search', the dictionary connect in the appropriate dictionary. It works even in Chinese! So, problem solved. The dictionary is not as good as before, but still, it works. Best regards, Markku

• Control values defined by the Index function only works for a running VI?

  I've never used set of control values based on the Index before so I decided to compare it against two other ways to set the controls on the front panel, by using the invoke Ctrl.Val.Set node and nodes for the value property. But if the VI which I am trying to set the controls does not work I get error 1000 say "The VI isn't in a State compatible with this operation." When I run the VI which I am trying to set the controls, I get an error. This is VI really only work if the VI is running? I can't set the values before calling the VI to run dynamically?

  I wonder why you do so in the first place.

  a bit of history. This feature was added to the problem write to items in front by reference is about 1000 times slower than writing to the Terminal. I think that this feature works by writing directly to the transfer buffer. It always ends up by being slower than writing to the Terminal, but only about 10 times slower.

  My company made use of this new feature. We needed it because we have updated thousands of values of frontage on the same VI by reference and labview couldn't keep it up (Yes, probably could have worked around him in a different way, but there is more detail than this...). If your ' e does not update thousands of articles, probably you should not use this feature. Performance savings is not worth the additional development effort it takes.

  It does not work probably because the transfer buffer does not exist when the vi is not running

• Firefox crashes at startup, only works in safe mode

  Hello.
  As the title says, I can't start Firefox because it crashes instantly. It only works in safe mode.

  That's what I've tried so far, but it did not work:

  Restored Firefox.
  
  Reinstalled Firefox and also delete my profiles.
  
  Hardware acceleration disabled.

  These are my recent incident reports

  bp-114dcdff-7b46-425b-8ec0-478102140218
  bp-464d26b6-4530-4230-8e4f-5000e2140218
  bp-7b489bc8-20ed-4cb5-9d3a-233a02140218
  bp-6a0e5565-1f66-4606-8c29-8ac292140218

  Thanks in advance, I hope you can help me.

  Thanks for your answers, I've updated my graphics card driver, now I can use Firefox out of safe mode with disabled hardware acceleration.

  There is another problem now, Firefox crashes when I try to start with Profile Manager, I use two different profiles, so I need this feature.

  Here are two reports of incidents on the problem:

  BP-a257ee60-b8d6-495c-82a3-605572140218

  BP-2e19ad39-84c5-4BD6-B251-fcbaf2140218

  Thanks for your help and sorry for my English.

  EDIT: I had to repair my installation of windows with the installation disc, now Firefox works, thank you Tyler and cor - el for your time.

• After Effects only works in trial mode

  Hello

  I bought membership unique creative cloud for after Effects (one month to the next) and installed it but it only works as long as the trial version. When I log in the Help menu of After Effect it shows me how many days left in the trial and then when I click on license this software button said no subscription found. When I connect my Adobe account plans and products page under link of products online there is no product saved on my account and under manage map link can I see my billing history and payment details but I do not see the active devices.

  I appreciate your help.

  sharcoiz

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  https://forums.Adobe.com/thread/1962238

• Hello, I have Lightroom version 5.7.1 I use no clouds at all. However, I just bought a class of Adobe's Lightroom, and it includes downloads that only works on a new version of Lightroom. As a result, I can't enjoy the great progress

  Hello, I have Lightroom version 5.7.1 I use no clouds at all. However, I just bought a class of Adobe's Lightroom, and it includes downloads that only works on a new version of Lightroom. Therefore, I can't take advantage of the excellent program, I bought (editing of Photo of Ben Wilmore Adobe® Lightroom® CC: The Complete Guide) unless I update.

  I resisted doing what I am on a fixed income and do not service CC. Unfortunately, I have a problem. How do I most cost effectively upgrade my version of Lightroom?

  LR CC and LR 6 are the same program other than some missing features to 6 LR6 is a standalone program. You are able to go to Adobe website LR6, so you should be able to use the course. We must look carefully because they want to subscribe, but it is available!

• Active state of menu in firefox does not work...

  Hello, in firefox the active state of the menu items does not work?

  How can I fix STI?

  Thanks for the help, martin

  Please check these videos:

  http://TV.Adobe.com/watch/Muse-feature-tour/Muse-trigger-target/

  http://TV.Adobe.com/watch/Muse-feature-tour/Muse-define-trigger-and-target-interactions/

  Thank you

  Sanjit