Desktop does not Netgear router

Similar Questions

• Shortcut icons on the desktop does not open.

  Shortcut icons on the desktop does not open unless I select a program in the "Open with" menu that appears whenever I click on a shortcut. This has only started recently. Previously I would click and icon would go directly to the Web site without asking how I want to open it. What is the cause?

  Hello

  · What is the number and the model of the computer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  1. you can follow the steps in the link below and check if this can help: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Desktop does not work

  Recently I got Dell reinstall Windows for me, and they have restored the backup I had. Everything seemed to work fine. I was re - install my apps, some of the original CD and a few downloads. I also updated to SP 3 Windows.

  Now the things on my desk does not work.
  1. the command run disappeared from the start menu. I went into the properties of the start menu and checked so that it should be established, but it doesn't show up.
  2 double click on any icon on my desktop does not work. To open an application that I right click and select 'open '.
  3. no provision starts from the start menu.
  4. the quick start icons come that if I go into the properties of the start bar and set it and then it doesn't show up when I restart the PC.
  5. nothing in the Quick Start bar opens with a single click.
  6. the search does not work when I right click on start and select search.

  Since the command run does not appear I can't service table to determine if the necessary services are defined.

  I'd appreciate a lot any help to get back on track.

  Glad to hear that everything got sorted out ultimately, and good luck in the future!

• My computer does not my router Linksys detect my internet connection. Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.

  connection and download Internet problems

  My computer does not my router Linksys detect my internet connection.  Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.  How to solve these problems?  so that my programs to work, I need these features.

  Hello

  1. you are using a wired or wireless?

  2 have you made any changes to the computer before the show?

  3. you receive an error message when you try to connect the Linksys router to the computer?

  4. what exactly happens when you try to update I Tunes?

  5. you receive an error message while updating I Tunes software?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can try the steps of troubleshooting provided in the links below and check if the problem persists.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• Windows vista desktop does not, can not click on icons. new PC toshiba laptop

  Windows vista desktop does not, can not click on icons. new PC toshiba laptop

  Windows vista desktop does not, can not click on icons. new PC toshiba laptop

  Your desktop icons may be damaged.

  This tutorial should help you to fix this. Use method 1.

  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

  t-4-2

• BlackBerry Smartphones BlackBerry Desktop does not recognize my Bb

  I just did some kind of update to my BlackBerry Desktop and 9790 and now BlackBerry Desktop does not recognize my Bb .  I deleted and reinstalled the office and still have the same problem.  Is there a way to do a factory reset on my Bb? I think that to nine will be the best course of action.

  You can wipe your BB completely, but make sure you have a saved backup file!
  go to options, security, then wipe device (you must type in the word blackberry!

• Remote Desktop does not see HP 8500

  My remote desktop does not see my new HP Officejet Pro 8500.  He's always seen my printers in the past, including my HP Officejet Pro 7600 on Windows 7.  I can't understand what setting I have to miss.

  Finally, I figured out, and I'll post it in case anyone else needs help.  MY remote desktop is accessible via the Terminal Server (Windows 2003 Server) services.  the driver must be loaded on the server is available with this link:

  OJP8500vA909_corporate_12_en.exe

  After you have installed the driver on the server, install the printer through "add a printer", local option and uncheck "auto detect."   Find the driver on the list, and then install the printer.  Then you should be able to see it on the server.

  If you then install it on a remote desktop (through the Terminal Server services), download the driver 8500 on remote desktop, install the driver on the desktop through "add a printer".   Right click on the printer on the "printers and faxes" screen and view properties.  Go to "ports" and find a port that communicates with your printer.

  IT seems that a special driver must be installed on the server, and then the standard printer driver must be installed on the remote desktop.

• Seagate Free Agent Desktop does not recognize my hard drive in Windows 8

  My Seagate Free Agent Desktop does not recognize the hard drive on my new computer with Windows 8. Although I can still use it to save and transfer all the data from one to the other, I lose the functions in the menu of the Seagate such as backup and synchronization. It worked fine on my old computer that worked on Windows XP. I tried Troubleshooting compatibility mode and that did not help.

  The message in the Seagate Manager appears as:

  None of the external drives have been found. Make sure that your external drive is connected and turned on.

  [Moved from comments]

  What brand and model exactly.

• Remote Desktop does not connect Win 7 on Win XP pro.

  The two turned on, remote active and available on the same network. I tried to connect by the name and Ip address, but I still get the error message. Remote Desktop cannot connect to one of these reasons: 1 remote control, access to the server is not activated 2 remote computer is disabled 3 remote computer is not available on the network.   I have connected before. In fact, I went to my computer in a click with the right button on the computer in the access network, it could not connect. He gave me the opportunity to diagnose the problem, so I chose it. The result of the diagnosis was the computer appears to be correctly configured but (computer) does not. I recently, during the last week, the object a new copy of windows xp pro on the computer and I have connected with access to distance since.  Why can't connect now?

  Check your firewall and router, the remote desktop protocol uses port 3389, this port must be opened.

  John

• Computer does not recognize router befsr41 after that I tried to reset it.

  So earlier today, I tried to reset my router because for some reason that I could not log in with my password I use normally, after switching to AT & T of the Charter (from DSL cable)

  Just after that, we moved the router does not either, but we called linksys for repair, but we had to pay $30 and I'd rather not do it again.

  Anyway, my computer will not completely recognize my router. I can't access it is based on the web options page, if I try to use the CD it will say that my computer is not connected. I know the cables are connected correctly.

  Oh and also, why I couldn't use my old password?

  Someone at - it an idea on what could be wrong?

  As you have activated your ISP to a cable on the DSL. The first thing you need to do is, pick up your Modem to the router. Let your Modem is connected to your computer. Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  Once you connect to the Setup page of your router, on the Configuration tab, you need to change the local IP address to 192.168.2.1 and click on save settings.

  Once the settings are successful, unplug the power from your router and Modem. Connect the Ethernet cable from your Modem to the Internet Port Linksys router. Connect the power to your Modem first, wait until all lights are cover, connect the power supply to the Linksys router. Once all the lights are solid check if you are able to browse the Internet on your computer.

• Remote Desktop does not work since MacOS Sierra update

  Unable to connect with Remote Desktop or cord that worked before update

  Greetings geoffshop,

  Thank you for using communities of Apple Support. It seems you want to use under macOS Sierra remote desktop, but it does not work.
  I recommend you read this article, it has the settings you want to check to make sure that it is able to work.
  

  macOS Sierra: allow remote desktop to access your computer

  Take care.

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Satellite M60 question - does not detect router BTvoyager2100

  Hello

  I have the Satellite M60 I bought in france. The problem I encounter is that it is picking up every local router broadband (4 of them to date) with the exception of my BTvoyager2100 router.

  I have a portable ibm English who picks up and uses the router bt with no problems.
  I used the xp wireless search engine and the radar of toshiba, but it does not find my router.
  does anyone have an idea what the problem is.

  Hello

  The Satellite M60 I bought in Germany has not built in Bluetooth device.
  The Bluetooth drivers are installed in any case, it's very confusing. I was looking on the same problem you do and finally found information that says:
  Computers laptop Toshiba with built in Bluetooth devices have a label at the bottom of the laptop with the Bluetooth brand label on it.
  On my M60 is no such label.
  So I think that the M60 was not built in a Bluetooth device.
  In addition:
  Bluetooth is not listed in the technical specifications of the M60.

• HP-P7-1026 b: Desktop does not start on Windows 10.

  Desktop computer does not start after reboot. Windows 10 message PREPARING AUTO REPAIR leads to next screen CHOOSE YOUR KEYBOARD LAYOUT and freezes / disables keyboard and mouse.

  Virus ISVProgramme can do so many things, do not rely on them. Also, why buy a new hard drive! Yours is still perfectly fine. I guess staples suggested, to avoid dupes. If you want a new hard drive. Your recovery disk should work as well as your old hard drive like new.
  Do not open e-mails that you are suspicious. One click and they own a computer.
  Good luck.

• 10.11.3 mission Control "Show Desktop" does not work with 3rd party keyboard

  I use a KENIMBENI Multi sync Bluetooth keyboard as seems to be the best solution when you want a wireless keyboard with a numeric keypad on a Mac.

  The KENIMBENI keyboard has its own combination of keys rather than Apple-command 'Mission Control' 'Show desktop '. It was working fine until 10.11.2. But now, after upgrading to 10.11.3, I find no way to make this button (or any other combination of the command 'Show desktop') works. Some key or combination of keys I enter the keyboard and/or the Mission Control preferences pane, will be shown on the screen, but the system does not react to it. I also tried switching to use several spaces to use a single space extending on my two monitors, assuming that it could have to do with behavior change - but none of this helps.

  I have an another Mac Apple original wired keyboard, and here the command-'Mission Control' combo works fine as expected.

  Can any that confirm - and perhaps know no work around? I'm a little old school management Finder and file and so use orders 'Show desktop' several times a day. Thanks in advance for your suggestions!

  You should discuss with the developer of the material. If it works for your OS with material Mac the fault lies with the proponent to provide a usable instance of this device with a newer OS, if they wish. In addition, we use a Logitech wireless keyboard solution full size and they are solar powered so no battery and no problems so far.

  http://www.KANEX.com/contact/TechSupport