Desktop HP Envy 23: is - sp63832.exe?

Similar Questions

• Desktop HP ENVY 700: problems with the boot from usb in the bios

  Hi I'm trying to boot from usb on a desktop HP ENVY 700. I don't know the serial number now.

  I followed the instructions and have produced a bootable USB and I checked this on a work dell computer where there is an option for me to boot from my USB if I so wish, but on my HP ENVY any options choose it does not appear with my USB in question and when I try to change the boot sequence making sure the usb/floppy and drive hard usb is above the rest of the sequencers starting it always starts just to the top as usual to my windows boot 10. I've disabled secure boot and used the boot of the legacy and it still does not work.

  I went through all the options I can that seem to be logic and it just does not work. I don't understand and I have to start using a usb key that I use the operating system can be very dangerous in a real environment, so it can not be downloaded to the hard drive.

  I need immediate help, this becomes quite frustrating now that it should be simple to do, but HP is not the way to simplisitic to do.

  Please if someone could point me in the right direction I would be so appreciative ideally if I could have a ride on the way to do

  I need this to work because I can't afford to buy new systems and its for my studies so its imperative

  Your PC has a motherboard of Memphis and happens to have a UEFI BIOS and the hard drive of the GPT format.

  You can check the type of hard disk online order volume by using the DiskPart utility.

  

  Create a flashdrive bootable UEFI with RUFUS.

  https://Rufus.AKEO.IE/

  Plug it into an available usb port before you press the power button. Near the powr button and immediately start to tap the F9 key to enter the boot from the sources menu. Select the Flash drive under the UEFI Boot sources. Let the boot process. If you have created the key correctly, it should start.

• Desktop HP ENVY h8 - 1520t CTO: the work of 750ti GTX with my HP Envy h8 - 1520t?

  Currently I have a desktop HP ENVY h8 PC - 1520t.

  (http://support.hp.com/us-en/product/HP-ENVY-h8-1500-Desktop-PC-series/5330773/model/5333059/product-...

  I think to buy an EVGA GeForce 750ti Superclocked 2 GB GDDR5 graphics card

  (http://www.amazon.com/dp/B00IDG3IDO/ref=wl_it_dp_o_pC_nS_ttl_encoding=UTF8 & colid = 1UKLB0G1XKA6Q & colii...

  I want to know if the graphics card will be compatible with my PC

  Thank you

  TPDavd, welcome to the forum.

  I think it's a great little card.  I think it should work on your computer.  However, before order you I advise to contact EVGA Tech Support to ensure that they agree.  They will be able to tell you with certainty all.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Desktop HP ENVY Phoenix 810qe: desktop HP ENVY Phoenix 810qe

  I wanted to know if
  
  Desktop HP ENVY Phoenix 810qe
  
  Comes with graphical bultin or only the dedicated graphics card?
  Please guide me so that I can make decision of purhcasing this product. Thank you

  Hello

  The link you provided indicates that this particular model has a NVIDIA GTX 745 graphics card included in the price.  This product HP, K6V72AV, also built in the Intel graphics processor, but it is not usable when the NVIDIA GTX 745 is installed.

• HP ENVY desktop h-8 1520 t CTO: where can I download HP TOOLS for my desktop HP ENVY h-8 1520 t CTO: 8.1 Windows Pro 64 bit?

  HP tools partition has been deleted! I need to download the HP TOOLS for my desktop HP ENVY h-8 1520 t CTO?

  Thanks to the members of form help.

  Hello

  The HP_TOOLS partition can be re-created by installing the diagnostic software package found on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-141219-1&cc=us&DLC=en&LC=en&OS=4158&product=5333058&sw_lang=

  Kind regards

  DP - K

• Desktop HP ENVY h8-1414 (part #H3Z00AA) need part number card pci-express gen 2.0 quad nic

  nic cards need additional to run simulation software, looking for a card nic quad for this motherboard. has 3 slots express gen 2.0 x pci free.

  need help and suggestions

  Thank you

  -sajid

  Desktop HP ENVY h8-1414 (part #H3Z00AA)

  Hello

  eBay is a good source:

  http://www.eBay.com.au/BHP/Quad-NIC

  or something is similar to that of the following map:

  http://www.computeralliance.com.au/PCIe-Gigabit-Intel-e1g44et2-Quad-Port-network-card

  Kind regards.

• How to connect to Windows 8 on my computer desktop HP Envy without using a password or pin code?

  How to connect to Windows 8 on my computer desktop HP Envy without using a password or pin code?

  Hello

  Did you read the MS article that I posted above?  There are instructions on how to do not require a password.

  Since the upgrade to Windwos 8.1 is free, then you should do this update and apply all of the published HP updates.  Then watch this video and it will show you how to remove the password and lock screen.

• Desktop HP Envy h8-1485ea: hp envy h8-1485ea slow at startup

  I have had this PC for a few years now and even though I keep the start up programs at least the boot time is now about 5 minutes.

  I think that this pc has a 16 GB drivewhich SSD I thought caching was supposed to prevent from starting slow times.

  The PC is a desktop 64-bit HP Envy h8-1485ea system.

  Is it possible that when I upgraded from Windows 8 to 10 of Windows operating system has been installed on the main 3 TB hard drive? If that were the case, how should I move to the SSD drive?

  Or should I put the SSD drive and if so, what specifications?

  bellator wrote:
  

  I have had this PC for a few years now and even though I keep the start up programs at least the boot time is now about 5 minutes.

  I think that this pc has a 16 GB drivewhich SSD I thought caching was supposed to prevent from starting slow times.

  The PC is a desktop 64-bit HP Envy h8-1485ea system.

  Is it possible that when I upgraded from Windows 8 to 10 of Windows operating system has been installed on the main 3 TB hard drive? If that were the case, how should I move to the SSD drive?

  Or should I put the SSD drive and if so, what specifications?

  The SSD 16 GB drive aims to speed up access memory, is not to speed up the startup time.

  The upgrade to Windows 10 made for the operating system on the hard drive of 3 TB. Upgrade Windows 10 will not install to one as small as 16 GB of SSD.

  You can install a SATA 160 GB SSD and a greater capacity and configure it as a startup disk.

  Use the hard drive 3 TB of storage.

  It is recommended that clone you the current startup for the SATA SSD drive before you install it in the desktop PC.

  Friendship will be the start-up and operation of the PC.

• ENVY 4-1215dx: HPConnectedremoteservice.exe errors

  Yesterday HP ENVY 4-1215dx laptop computer my wife started having problems with the screen flashes every 10-15 seconds, and when you enter, the letters should be retyped because they do not take the first time.  The laptop is running 64-bit Windows 8.  The PC has restarted last night, but it does not solve the problem.

  This morning I ran a tool called MiniToolBox, and he found several errors to HPConnectedRemoteService.exe.  An example of one of the mistakes is below.

  Application errors:
  ==================
  Error: (23/04/2015 07:28:29) (Source: Application error) (user :)
  Description: Failing the application name: HPConnectedRemoteService.exe, version: 1.0.1218.0, time stamp: 0x5078a573
  Name of the failed module: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
  Exception code: 0xe0434352
  Offset: 0x0000000000047b8c
  ID of the process failed: 0xfdc
  Start time of application vulnerabilities: 0xHPConnectedRemoteService.exe0
  The failing application path: HPConnectedRemoteService.exe1
  Path of the failing module: HPConnectedRemoteService.exe2
  Report ID: HPConnectedRemoteService.exe3
  Failed package name: HPConnectedRemoteService.exe4
  Flaws in the application related to a package ID: HPConnectedRemoteService.exe5

  Error: (23/04/2015 07:28:29) (Source: Runtime .NET) (user :)
  Description: Application: HPConnectedRemoteService.exe
  Version of the Framework: v4.0.30319
  Description: The process was completed due to an unhandled exception.
  The exception info: System.PlatformNotSupportedException
  Battery:
  at System.ServiceModel.Channels.TransportManager.Open (System.ServiceModel.Channels.TransportChannelListener)
  at System.ServiceModel.Channels.TransportManagerContainer.Open (System.ServiceModel.Channels.SelectTransportManagersCallback)
  at System.ServiceModel.Channels.HttpChannelListener'1 [[System.__Canon, mscorlib, Version = 4.0.0.0, Culture = neutral, PublicKeyToken = b77a5c561934e089]]. OnOpen (System.TimeSpan)
  at System.ServiceModel.Channels.CommunicationObject.Open (System.TimeSpan)
  to System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen (System.TimeSpan)
  at System.ServiceModel.Channels.CommunicationObject.Open (System.TimeSpan)
  to System.ServiceModel.ServiceHostBase.OnOpen (System.TimeSpan)
  at System.ServiceModel.Channels.CommunicationObject.Open (System.TimeSpan)
  at SwitchBoard.Utils.WCFServiceHostUtil.setupService (System.Object, System.Type, Int32, Boolean)
  at SwitchBoard.SwitchBoardService.RunService)
  at System.Threading.ExecutionContext.RunInternal (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
  at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
  at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
  at System.Threading.ThreadHelper.ThreadStart)

  After finding these errors, I went to control panel > programs and features and a repair for HP connected remotely done, it does not solve the problem.  Then, I uninstalled HP connected remotely, restarted, and the problem seems to be fixed.

  I need HP connected remotely to what whether?  If so, how can I download a new copy that works?

  Gary

  HP no longer offers the connected Remote App is not available in any app store.  This review:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03748009

  It is not necessary to the operation of your computer and if you have any problems, simply uninstall it.

• Modle:HP Desktop - 750-11 WANTED: good graphics for desktop HP ENVY - 750-114 cards

  As the title I'm looking for a graphics card to upgrade to since that integrated is not the best. Any help will be greatly appreciated thanks. Model: HP ENVY Desktop - 750-114

  Thank you for the additional information.

  Here's a page on the cards around the price you want to pay on Newegg.com.  This will give you an idea what is available.  You should read the reviews to see what users have to say about them.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Desktop HP ENVY Phoenix 860VX: how to replace ssd boot drive in a desktop HP ENVY Phoenix 860VX?

  I bought a desktop computer HP ENVY Phoenix 860VX with an SSD of 256 GB of disk as a boot disk with a disk of 1 TB storage.  I have a Samsung Evo Pro 500 GB SSD I want to use as the startup disk.  I cloned the original drive to the Samsung Evo without problem.  I opened the PC folder to move hard disks, and I can't find the SSD drive.  I found the pretty easy storage of 1 TB drive but cannot find the SSD drive.  Can anyone help?

  Greetings,

  You can have a PCIe M.2 (Non - SED) Solid State Drive 256Go.

  This drive connects to the motherboard, it's the size of a stick of gum.

  It can be mounted vertically or stand flat on the motherboard (MB).

  M2 the drive is much faster than an SATA 3 SSD.  You may not be happy with this change if you bought a SATA 3 SSD. You might be better off going to a 512 GB m2 if the MB supports. I noticed that the m2 drive runs closer to the rated speed when using a k i7 - 5930 or an i7-5960 x due to the track of 40 PCIe bus as opposed to 28 tracks on the i7-5820 k.

  It should be close to the PCIe slots. ASRock, Asus and Gigabyte locate M.2 slots here as it connects with the bus PCIe x 16 and uses the bandwidth of one of the 16 slots x.

  If this is true, install the SATA SSD in the available Bay HHD using an adapter 2.5 inches. Then change the default boot device in the BIOS for the SATA SSD. You may need to experiment on what SATA port you use. EFI can be finicky. It is also possible that you may have to reinstall the original image. I have an Asrock x 99 card in m.2. Asrock BIOS is much more forgiving and configurable. I'm not familiar with MB of your PC or the boot configuration options available during the passage of a m2 boot device to a boot SATA device.

  This change of equipment could also ruin to restore the PC using the original image. It depends on whether this change of equipment is a configurable option to purchase.

  See you soon!

• Desktop HP ENVY Phoenix 810qe: Blu - ray player and SuperMulti DVD burner

  I am interested in the HP Store and want to buy HP Envy 810qe desktop. It has a 'Blu - ray player and SuperMulti DVD burner." Can I burn data and media projects of discs blu - ray recordable with this burner? I have two different answers when I talk with the Sales Department of online chat.

  If the description says "drive Blu - ray and DVD SuperMulti burner."  Then it can only burn to DVD or CD.  In the description in the "customize and buy" button is says - play music and movies, backup files and burn your own CD and DVD.

  There is no possibility to opt for this particular model, unfortunately.

• Adding a graphics card from nVidia GT640 to a new desktop HP Envy

  Since buying a new HP ENVY 700-147c desktop PC and a new nVidia GEForce 640 GE video card on in November 2013 (cybermonday sales), I could not have the HP Envy boot with the GE 640 card in place. After hitting the Start button, with one of the HDMI ports allow (same results using a VGA > HDMI adapter), I get a series of POST messages is with the screens VGA HDMI to stay black.
  
  I removed internally AMD video drivers such as recommended by the technical support from nVidia, but with the same results. When I removed the card GE 640, the Win 8.1 has reset the original drivers, and I can run off the coast of the internal VGA / HDMI ports on the desire, but with much lower resolution than the 640 GE would allow card.
  
  I repeated this procedure and checked the BIOS to see if there is an adjustment could be made, but none have been noted... Please advise if I have missed anything in the BIOS of envy.
  
  I repeated the procedure with a well-known nVidia GEForce 9500GT card from another HP Pavilion PC running Windows 7 Pro. Power over the results were the same. black screens with POST messages about 4-5 seconds after switching on.

  After the withdrawal of the 9500GT card, I was still able to operate with the integrated graphic card HP Envy.
  
  Please advise on how I can add the GE 640 card, I bought the new envy, for graphics work I do.

  Hello:

  You need to change two settings of the BIOS, then reinstall your new video card.

  Please see the info on the link below to change the BIOS settings.

  http://support.HP.com/us-en/document/c03653200

• HP ENVY h8-1534 desktop PC: windows desktop HP ENVY h8-1534 10?

  Hi, there will be an upgrade of windows 10 for the

  HP ENVY h8-1534 Desktop PC... it passes two month since I reserved my copy of windows 10 and my windows is still in the ' have been validate window 10 for your pc.

  Hello

  You can update now if you wish, please follow the instructions below:

  https://www.Microsoft.com/en-us/software-download/Windows10

  Kind regards.

• Desktop HP Envy 750qe: cannot install ESXI 6.0 on this server

  The specifications of the HP Envy 750qe desktop say nothing about the LAN card.  The motherboard is MS - 7826 Ver 2.0.
  There is a metal box closed covering the LAN and 2 accessories usb soldered to the motherboard.  Windows 10 indicates that the LAN controller is Realtek PCIe GBE Family Controller.  I would like to know the chipset used for this LAN Controller without destroying the material.  I can't find a direct reference anywhere - Realtek, HP or otherwise.

  Thank you

  Joe

  Realtek 8168 - built a custom iso using this link. LAN problem is resolved.

  http://www.v-front.de/2015/04/ESXi-60-hits-VMware-online-Depot-what.html

  installed the customizer on windows 7 and run the power shell script.

  .\ESXi-customizer-PS-v2.4.ps1 - vft - load net51-drivers