Despite having a pretty good WLAN card, on the installation of photoshop and other software, its asking me to check again and try again, why?

Similar Questions

• I have PHotoshop CS5 for PC. I have a new PC and want to install CS5 on this new PC. I also have the bridge. As I don't remember having bridge separately, I guess this is the part of CS5 and I automatically have deck when CS5 is installed on the new compu

  I have PHotoshop CS5 for PC. I have a new PC and want to install CS5 on this new PC. I also have the bridge. As I don't remember having bridge separately, I guess this is the part of CS5 and I automatically have deck when CS5 is installed on the new computer. Is this correct?

  Yes, that's correct. The bridge is only a separate download with CC (CC).

• I have the creative cloud (Photoshop and Lightroom) in my computer, but I had a problem of invoice, and because of that, I had to do, the association again change the registered credit card. But when I click to download shows error 82. How can I fix it

  I have the creative cloud (Photoshop and Lightroom) in my computer, but I had a problem of invoice, and because of that, I had to do, the association again change the registered credit card. But when I click to download shows error 82. How can I fix it?

  check your account and confirm your adobe, Adobe ID id

  log out and then back to your office to cc using the same adobe id allowing you to check your subscription is current, https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

• Equium A60-173 PSA67E: WLan card supports the Orange Livebox router

  This is my first post so please accept if he is not writing to apologize.

  I have the laptop above and would like to know if it would be compatible with a wireless network card to connect to my Livebox Orange router?

  Thanks in advance.

  Neil

  First of all, are you sure that your laptop is equipped and supplied with the internal WLan card 100%?
  I m not sure but I think that this phone does not support the Wlan?  :|

  In any case, if the minPCI wireless network adapter is not available, you can use an external WLan solution as a key USB WiFi. These sticks are cheap and easy to install.

  I talk to you I recommend checking out the Livebox Orange router specifications. You know what Wlan standard is supported. You know the Wlan standards?
  I mean the standard 802.11 A, B, G or N most recent standard

  B and G standards are best known and no longer supported.

  Well well, to cut this story; You must use the card/WLan USB WLAN which supports the WLan standard even as your WLan router ;)

  Good bye

• Satellite 2430-301: cannot use 2200BG WLan card because the switch is off

  Hello

  I have a Satellite 2430-301, which was not delivered with WLAN functionality. But I discovered, that there is a MiniPCI slot in the laptop.

  So, I bought an Intel® PRO/Wireless 2200BG Minipci card. After that I joined the card in the laptop, it has been detected by windows as a new network device. I downloaded and installed the drivers of Windows XP (because I have Windows XP installed on the laptop) of Intel (9.0.4.17) home page. The installation worked perfectly.

  Now I tried to connect to a wireless network, but the software Intel says that the card is on 'off '. So I changed the menu drop-down on "on", which resulted in a mistake in German: "Die Intel (r) PRO/Wireless-Netzwerkverbindung ist noch deaktiviert.» Aktivieren Sie sie über your Hardware-switch. "(which means something like 'network Intel (r) PRO/Wireless connection is turned off. Turn it on with the hardware switch. »).

  Although the switch was already in position "on", I spent several times - nothing important happened. The led next to the switch will not illuminate in both positions.

  Are there problems of incompatibility between "Toshiba Satellite 2430 301" and "Intel PRO/Wireless 2200BG?

  I did something wrong?

  Is - this darn broken hardware switch?

  Any suggestions?

  I would be really happy if someone could help me :)

  Thanks in advance,
  Thuriel

  Hello

  The hardware switch led should light up if the switch is on.
  In addition if you want to use the WiFi network you must go to the WLan with FN + F8 option.
  In addition, you must check the WLan card properties in Device Manager. Here, you enter the Advanced tab. In the field of property choose radio power option and select the value to on.

• Why keep having added again and again the same card? The security code disappears and I have to enter again.

  Now I have to add the same card, because the security code disappears.

  Take a look at this article, it can help you change or delete your Apple ID - Apple Support payment information

  or you can also contact - official Apple Support

• Is it possible to have a credit card for the sharing of family and another credit card for a family member?

  I want to have my credit card business for my purchases and subscriptions and have our personal card for the rest of the family purchases. Is it possible within a group sharing family?  If so, how it is configured?

  I think it's only 1 card credit payment to the folder.  However, family members may have gift or store credit which can be used for purchases.  If you credit cards/store gift for their accounts, then they may use their purchases, Yes?

  Purchases and payments - Apple Support families

• KKKKK displays an error message with the graphics card during the installation

  My laptop is a DV6 6121tx with QB367PA #ACJ product number.

  During the installation of kkkkk, it displays an error saying not able to recognize the graphics card in the system.

  Please suggest an update secure for the soul if they are available.

  HP support assistant details of my graphics driver:

  Radeon (TM) HD 6770 M

  8.882.2.3000 (30/09/2011)

  Hi champakBhumia,

  Welcome to the HP forum!

  Here is a link to the HP Pavilion dv6-6121tx Entertainment Notebook PC specifications and HP Pavilion dv6 Notebook PC Maintenance and Service of Guide , which will provide a recommended list of replacements.

  I hope this helps.

• How to install Photoshop elements 14 and first 14 elements the new MacBook? I tried installing content of the DVD to the SD card but the installer says now software is pirated. [was: piracy?]

  Hello...

  many apologies for my bad English :-)

  I bought Photoshop Elements / Premiere Elements to Amazon 2 days. Today, I tried to install it on my new Macbook, there is no unit of DVD, so I copied the files on a SD card and put that in the Mac and began to install. The application process the Adobe ID, I connected and then typed the serial number. He asked for the volume and started installing. After that, he stopped and noticed, that there is an error in the health check for Original software and said: that my product is NOT original. It is due to the copy of the SD card, or is it real hacking? A thinking about it?

  Here the original text:

  Thank you for the help...

  JAN

  If you use the installation files, there should be no problem.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • Premiere Elements: 14, 13, 12, 11, 10: 9, 8, 7
  • Photoshop Elements: 10, 12, 14, 11, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• virtual network card to the physical network mapping and default loadbalancing

  What Virtual Machine virtual network card is map physical NIC.

  For example.

  lets assume Vswitch1 on host1 esx dedicated for the network of the virtual machine (port group) and it has 6 cards network linked to it (vmnic1, vmnic2, vmnic0, vmnic3)

  Load policy (default) Balancing - from the originating virtual port (it balances only outbound traffic through all the nic assigned to vswitch1 right?)

  ESXi host1 <-Vswitch1 (the VM network) <---(vmnic 0-vmnic 3)

  Lets assume that esxi hosting 6 virtual machines and each virtual machine has two network cards configured.  Through some documents, come out of that when the virtual machine is running, it gets connected to the ports of availabe on virtual swicth. say, I turn on the virtual machine in the order VM1, VM2... VM6.

  Vmname virtual adapter port on virtual switch1 Mapping of the physical network adapter                        

  VM1 eth0, eth1 1.2 which mappeed of the physical NIC to eth0, eth1?

  VM2            eth0,eth1                              3,4                                      ?

  VM3            eth0,eth1                              5,6                                      ?

  VM4            eth0,eth1                              7,8                                      ?

  VM5            eth0,eth1                              9,10                                    ?

  VM6            eth0,eth1                              11,12                                  ?

  Since we use load balancing based on the virtual port, can two virtual map of the same virtual machine are mapped to the two physical NETWORK card I want say eth0 VM1 is mapped to the (physical nic) VMNIC0, VM1 eth1 get connected VMNIC1 (physical nic).

  It would be great if you could explain how the virtual network adapters are mapped to the physical NIC Y at - it a command or a script to the list NIC(of all vms hosted on esxi) virtual NETWORK adapter mappings physical in detail.

  .

  sansaran wrote:

  Is there a way to know what virtual NIC to connect to which physical NIC

  With the virtual NETWORK adapter, you hear the virtual card inside the VM? If if and when you use several VMNIC like you, there is no visibility in vCenter (usually vSwitches, we see with Distributed vSwitches).

  However, you can use the command-line ESXTOP tool in the view 'n', for the connection between the virtual machines and the outgoing vmnic.

• Satellite 1410 S102: WLan card detect the SSID but cannot connect

  I have no PA3458U-1MPC installed part of the mini-map wireless in my PC Toshiba 1410 S102.
  The card works well, that it detects wireless (SSID) but the problem is that I can't able to connect to my router and also there is no light wireless ON my laptop. Thanks in advance for the help

  Check if the device that you have added to your laptop is working properly. To do this, go to control panel - system - device manager.
  Your wireless network adapter should be listed here.

  Note that you must enter the security key for your router to access the wlan. Another thing you could try is to check the settings of your router or if installed firewall, not that there is any set of restrictions, preventing you to connect.

• Is the XFX HD 7850 a good graphics card for the desktop HP-P7-1534.

  I just got this computer in office during the summer because everyone said it would be a cheap system for games. I love this desktop computer, but there are a few games I would like to very smooth running as 4 Battlefield and Call of Duty: ghosts. I was just wondering if the graphics card XFX HD 7850 would meet my needs. I also intend to buy a new corsair 750W power supply for the graphics card would work.

  Jobro94, welcome to the forum.

  Yes, the HD 7850 should work correctly.  If, however, you decide to take the Double (2 fans), you should get the measurements and make a cardboard template to ensure that it fits properly.  It is 9.5 "long and has two power connectors 6 pins.  They will add about an inch to the length, once the cables are connected.

  Here are the recommended system requirements for BF4:

  The PC recommended configuration for optimal rate of quality and Visual framework:

  • (Intel Core i5 or i7) CPU, Quad core at 3 Ghz
  • 4 GB memory (8 GB for 64-bit operating systems)
  • A modern map of DX11 graphics with 2 + GB of video memory, the series 600 GeForce or Radeon 7000 series
  • Windows 7 64 - bit operating system (Windows 8 is supported as well)
  • 30 + GB of free hard disk space

  This is the recommended configuration for the Cod: Ghosts:

  Recommended configuration

   

  • OS: Windows 7 64-Bit / 64-bit Windows 8
  • CPU: Intel Core i5-680 @ 3.6 GHz
  • RAM: 8 GB RAM
  • HARD drive: 40 GB HD space
  • Video: NVIDIA GeForce GTX 760 @ 4GB
  • Sound: Card its compatible DirectX
  • DirectX: DirectX 11
  • Internet: Connection broadband and service required for multiplayer connectivity. Internet connection required for activation.

  As you can see, BF4 will probably work better with the HD 7850 than COD: ghosts.  Cod seems to be more intensive graphics.

  Please click on "BRAVO Star" if I helped you and click on "Accept as Solution" If your problem is resolved.

• Dell Wireless WLAN Card Wireless Network Controller stopped working and was closed...

  I am currently getting the "pop up" above in the background toolbar... I contacted Microsoft, Dell support... completed three restorations system, uninstalled/reinstalled drivers, etc... can someone help with this problem?  When I go to start, Dell Wireless, etc. it does/do NOT come...

  NORMALLY, there are two (2) icons in the lower right toolbar... 1 = green signal bar code & 2 = computer conection... the first is no longer present... it is really annoying and I would get corrected as soon as possible!  In/on the computer everything works fine... I have same INet connection!  PLEASE NOTIFY.

  Computer Dell laptop, 1721 with card (?) internal wireless... Del, after 1 1/2 hours... and no '' renewal '' of warranty... hung up on me... Imagine that!

  After many hours... I have finally given & called 800 support...

  He went through four levels and eventually led to a software/hardware High Tech.

  person author/Installer... took 2 minutes and it was done!

  Thank you!!!

  Now... from today '... #2 laptop does not work!  I/we're back...

• Realtek card gives the error code 10 and does not work since the change of satellite

  How can I fix the realtek on my computer card. It was the dial upwards, after he took off and replace it with satellite my computer wouldn't access internet
   
  How can I fix the realtek on my computer card. He has been on dial-up, after taking if off dial-up and replaceing with satellite my computer wouldn't access internet. Noted code 10 and realtek does not work. So a please help fix me my computer.

  Hello

  What operating system is installed on the computer?

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  See the following article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• Error with Driver graphics card after the installation of Vista

  Hardware acceleration is disabled or not supported by your video card driver, which could slow down the performance of the game. Make sure that you install the latest video card driver and that hardware acceleration is turned on.

  I had downloaded a windows Vista premium edition with my pro key number

  We don't know what that how your computer has been built.

  Try this:

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner