Destination directory

Similar Questions

• Problem with my file in the SupportVIs directory found deployment package and not the Destination directory specified

  I have a little problem with a package of teststand.  I wrote a few screws to provide a wrapper around a custom DLL to provide the error handling. These screws use the following call library functions as indicated below.

  

  After installing my application, some of my screws are my DLL custom in the correct destination directory and other parts that are in the Directory Support screw which creates the deployment. The problem is that the DLL must be installed in a specific directory, because it uses the other files that are in this place-related directories.

  Currently I work around this problem by running the installer, and then manually delete the DLL to the folder of the SupportVIs dirctory.

  Does anyone have any suggestions on how to fix this?.

  

  

  Hey,.

  So, what seems to happen, is that your VI sees that DLL as a dependency and wants to keep with her VI.  I can't find a way to the deployment tool to do what you ask, however, here are two ideas that could solve your problem in other words.

  Do you need to have your DLL in the precise place?  If this is not the case, why not in your VI on your call library function, check specify a path on the chart.  Then, on your diagram, you generate a path relative to the location of the VI.  In this way, it's okay if your DLL is located in the support of screw

  Another idea would be after that installation is created, you can create a batch file that runs the installation and then automatically delete the DLL support VI place.

• an error occurred trying to rename a file in the destination directory code 5

  When I try the installed software on this time its error getting
  ; an error occurred trying to rename a file in the destination directory code 5

  Hi Sissi,

  1. What is the full error message do you get?

  2. This only happens when you try to install a particular program?

  3. using the administrator account?

  Step 1:

  You can try to take ownership of the file or the folder and check.

  How to capture a file or a folder in Windows

  Step 2:

  I also suggest you temporarily disable the antivirus software third and firewall on the computer and check to see if that fixes the problem.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

• How to set programmatically to a generation specificaiton target filename and destination directory?

  I'm trying to simplify my generation of application process. Currently, every time I do a new build, I take the current build and change the name of construction technique, target filename and destination the directory manually.

  I wish I had a pre-build VI run that changes the target directory filename and destination based on the version number auto-incrémentées. I found GetTargetBuildSpecs.vi to... \vi.lib\AppBuilder\, but could not find property nodes that allow me to define the generation of the spec properties that I want.

  Anyone has any info on this?

  Thank you

  
  

• Change the destination directory during the installation of Acrobat Reader DC

  How can I change the destination path during the installation of Acrobat Reader DC? After the download and execution of the installation file, I can't make any changes and Acrobat Reader will always be installed on drive C (sys), but I would change on drive D (data)! Any suggestions?

  Hi martinm1975,

  Try Adobe - Adobe Acrobat Reader DC DistributionSetup offline.

  After the extraction process, you will get the option to change the destination file.

  

  Kind regards
  Nicos

• Error during the installation of Windows Search 4.0, 'an error occurred during the file copy Search.adm. Cannot copy file in the destination directory. »

  • Configuration displays error "check the log (C:\WINDOWS\KB940157.log) file.
  • Log file includes the following error - 108.625: VerifySize: could not get the target size of the file: C:\WINDOWS\system32\GroupPolicy\ADM\Search.adm

  No idea how to address this sort of WS4.0 installs?

  INTELLECTUAL PROPERTY

  Hello

  You made any hardware or software changes the computer recently?

  You have Service pack 3 is installed? If not, install Service Pack 3 first, and then try to install Windows Search 4.0.

  Try these steps and let me know the status.

  Follow the suggestions given by dbrockus from the link given as dated Wednesday, February 4, 2009:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdesktopsearchhelp/thread/f8882314-da75-4142-a889-50c1983dc1e8

  Also, see this Microsoft article on how to take the permissions of a folder: http://support.microsoft.com/kb/308421

  I hope this helps.

• Open the file 'C:\Windows\system32\ctl3d32.dll' could not be please check your disk is not full and that you have access to the destination directory. Access is denied.

  I am running Windows 7 Ultimate x 86 version and tries to install exPressit (by Memorex) is a very simple program and I just reinstalled Windows 7 just before so I have a new facility, 230gig of free space and 3 GB of ram so it could just be no proplem. Ive tried running as administrator and also replacing compatibility down to xp and Vista. I currently have 3 other computers using this program with Xp Proffesional, Windows Vista Ultimate, and Windows Vista Home Edition with no problems at all, so any ideas would be great cause if I don't find a solution quickly, that I have to downgrade to Vista.

  You should contact the support of exPressit on the compatibility of Windows 7.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Directory/folder operations - transfer of files based on a list

  Hi all!

  I have a dilemma: I have a folder of files, there are about 1000 .pdf files in the folder. I need to transfer those who are related to me in a different folder (about 250 of them) and I don't have a list of the files that I need. But it's a tedious process if I did it manually.

  What would be the best way to manage it?

  Thanking you in advance.

  Hmmmm...   Always something...    This is because the "copy" command copies only the files, not folders.

  The best way to handle this at this point is to put all of the directories that you want to copy to a separate 'list' of the file directory... call it "listD.txt".  You can then enter the following command to copy the directory/files:

  for /f "delims =" %i in (listD.txt) robocopy /e "%i", "C:\path1\endpath\%i".

  Yet another approach that would not create another 'list directory' must go back and to 'change' instead of the 'copy' in an empty directory.  A "move" operation will move directories and files.  After the move, you can open the destination directory, select all (Ctrl-A) and hold down the 'CTRL' key while you drag it to the original source directory.  This copierait them all back to the source, leaving you a new directory with a copy of what you wanted.

  HTH,

  JW

• Move the files to a directory to another directory

  Hello

  We use the money;

  Application: Oracle EBS R12

  Database: Oracle Database 11 g

  We have a requirement;

  I submit an application, I want to move the output PDF file to another server on the internet after the successful via the script execution.

  How can I perform this task?

  Kind regards

  Waqas Hassan

  You will need to mount/map the machine/destination directory on the computer where the simultaneous processing running,

• CFFILE download destination travel

  Hello
  
  I'm developing a site to download files on the network and I was wondering if there was a directory navigation utility (such as input type = 'file') where you can navigate to a destination directory to download the file. Looks like an obvious thing to want to do, but I can't seem to find anything that allows this.
  
  Any help on this would be greatly appreciated
  
  Thank you.

  Thank you both for taking the time to help me. Between the 2 options, I should be able to understand something.

  See you soon!

• 14 Firefox forgets where to save downloads

  Firefox version: 14.0.1
  O/s: Windows XP Edition family version 5.1.2600 Service Pack 3 Build 2600

  When I try to record a series of image files on the same site in a destination directory using a right click > Save Image under..., frequently (but at random intervals) Firefox forgets where the record of the previous file.
  I can correctly save multiple files in the expected folder, then find that the Save As dialog box has forgotten the target folder. Sometimes, it restores the default download folder, but sometimes, it comes in a folder that I used for downloads (on a different Web site) days. It can then return to a different folder, I also used for downloads (from a third party site), also days ago.
  Occasionally, I navigate to the folder target for each of a succession of downloaded files, then Firefox starts to remember where files go - don't forget again, later in the series. This means that I have to pay attention to what makes Firefox and wasting time check which folder he thinks is the target, rather than to focus on the task, I'm in show.
  I don't remember meeting this stupid behavior and worse in previous versions of Firefox. So far, I noticed only when you use the right click > Save Image under... but cannot download some he did not appear with other methods.

  The current versions of Firefox don't forget not the directory download, based on the URL, so if the URL changes then the default folder can be selected if he has not selected a folder for this server before download.
  
  You can disable this feature to not forget the download via the prefs directory Boolean browser.download.lastDir.savePerSite on the topic: config page.
  
  The pref browser.download.lastDir.savePerSite does not exist by default (it's a hidden pref), you will need to create it.

  Create a new pref Boolean with the name browser.download.lastDir.savePerSite and set it to false.

  • http://KB.mozillazine.org/about:config

  You may need to clear the "Site preferences" via clear recent history to delete already stored data.

• Toshiba still cannot move to W10 WT7

  We know how to successfully again 7 "tablet 10 Windows?

  1 C drive has a maximum of 2.3 as free GB and a 32 GB SD card connected. The upgrade process stops while loading files and nearly 72% completion. I get the error code is 8007001f

  2. I also have a USB W10 player via media creation tool. I hook it up to the shelf and press the setup.exe file, but the upgrade process stops at 2% saying that this destination directory could not be created.

  3. I tried a new install through the boot with the same USB W10, but the process requires a keyboard to move from one screen to the other and the Tablet is a Tablet, so I can't continue the installation.

  PS. I downloaded and applied Windows update hotfix above all. Download the update correctly, but installation is not complete

  STILL WT7C100 MINI
  Windows 8.1 with Bing
  Next-generation Intel® Atom processor for Z3735G tablets
  Intel® burst technology 2.0
  7.0 / 17.8 cm, wide VGA touch Multi Super
  (WSVGA), 16:9 aspect ratio
  Solid State Drive 16 GB
  White black
  1 GB (onboard), RAM DDR3L (1333 MHz)
  Intel® HD graphics card

  Problem solved.

  1. created more space on drive C by reducing the paging file to 500 MB, turning off hibernation and the great removal program files (desktop, Skype etc.) for 3, 5 GB of free space

  2. run Windows Update, Windows Update fixed, C lead optimization and clean (files clean and clean the system files)

  3. start the machine

  3. a 10 a Windows USB drive created with the creation of media and run as administrator

  Windows 10 is now installed, former recovery disk has been removed and the C disk free space is about 6 GB, enough to accommodate files page, restore point and programs / applications

• Cross and copy files to the new structure

  Hello people!

  I had a huge task I'd like to simplify with a bit of Applescript.

  Basically, I would like to move or copy a lot of files in a new folder structure.

  I have a few different folders with all 500-4000 jpg, see image below.

  First picture shows the old structure, 2nd picture show the new structure I would accomplish.

  

  I want to do is have a script to loop through and take the first 4 characters of the file name and create a folder with that name in the location of my choice.

  Then, create a new folder in the parent called JPEG folder and copy all of the files with the same name specific to this folder.

  So far, I've been able to automate the creation of folders and subfolders.

  any help is appreciated

  loc to choose a folder "choose the Parent folder location."

  Repeat with I from 1 to 3

  the value d to text - via -1 of 2 ("51" & I as text)

  Try

  tell application "Finder" to set targetFolder to create a new folder in loc with properties {name: "61" & j}

  tell application "Finder" to create a new folder to targetFolder with properties {name: "JPEG"}

  tell application "Finder" to create a new folder to targetFolder with properties {name: "PSD"}

       end try

  end Repeat

  Hello

  You could try the AppleScript script which is a simple bash script wrapper.

  It will allow you to choose the source directories and destination and then analyze the source for jpeg files tree and copy the jpeg file with name starting with excatly 4 digits IJKL to the correspondent-I000/IJKL directory in the destination. In the destination path directories are created as it should. For example, your screenshots, you can choose the folder '7000-8000' or its parent directory in the source directory and the "OBJECTS" folder as the destination directory.

  Any jpeg file which doesn't have a name starting with exactly 4 digits is ignored. Verbose output of the CP (1) and any errors will appear in the result pane / window (Apple Apple) Script Editor.

  --APPLESCRIPT
  set src to (choose folder with prompt "Choose source folder where source tree is rooted at")'s POSIX path
  set dst to (choose folder with prompt "Choose destination folder where destination tree is rooted at")'s POSIX path
  if dst starts with src then error "Source tree may not contain destination." number 8000
  set args to ""
  repeat with a in {src, dst}
      set args to args & a's quoted form & space
  end repeat
  
  do shell script "/bin/bash -s <<'EOF' - " & args & "
  SRC=${1%/}
  DST=${2%/}
  {
  export LC_CTYPE=UTF-8
  while IFS= read -r -d $'\\0' f
  do
      n=${f##*/}
      [[ $n =~ ^(([0-9])[0-9]{3})[^0-9] ]] || continue
      p=${BASH_REMATCH[1]}
      q=${BASH_REMATCH[2]}
     
      jpg=${DST}/-${q}000/${p}/JPEG
      psd=${DST}/-${q}000/${p}/PSD
      [[ -d $jpg ]] || mkdir -p \"$jpg\" || continue
      [[ -d $psd ]] || mkdir -p \"$psd\" || continue
     
      cp -v -pPR \"$f\" \"$jpg\"
  done < <(find \"$SRC\" -type f -iname '*.jpg' -print0)
  } 2>&1
  exit 0
  EOF"
  --END OF APPLESCRIPT
  

  Briefly tested under OS X 10.6.8 but no guarantee of any kind. Please make sure that you have a full backup of the original directories before running this kind of script.

  Good luck

  H

• Folder action to run a ruby script

  Hi all

  I have various AppleScript scripts that deal with PDF files manually, (thanks to the kindness of many on this forum), but I want to convert to a folder rather than ask me sources and destination action script.

  This is the current script - it is easy to convert to a folder action so I can just drag files to a hot folder?

  =======

  _main()

  on _main()

  o script

  aa property : Choose file with command prompt ("choose PDF Files.") Type {"com.adobe.pdf"} ¬

  location (path to the Office) by default with multiple selections allowed

  the value beginning de choose a folder with prompt ¬ ("Choose Destination folder.") my aa

  default location (path to the Office)

  game of args for «»

  Repeat with an in my aa

  Set args to args specified POSIX path form & space

  end Repeat

  in view of digital channels

  if (system information)'s version of the system < "10.9"=""> then

  Ruby set to "/ usr/bin/ruby.

  on the other

  Ruby set to "/ System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/bin/ruby".

  end if

  end in view of

  "ruby shell script &"<'EOF' -="" "="" &="" args="" &="">

  require ' osx/cocoa '.

  include OSX

  require_framework 'PDFKit.

  OutDir = ARGV.shift.chomp('/')

  ARGV.select {| f | f = ~ \\.pdf$/i} .each | f |

  URL = NSURL.fileURLWithPath (f)

  doc = PDFDocument.alloc.initWithURL (url)

  path = doc.documentURL.path

  pcnt = doc.pageCount

  (0 .. (pcnt-1)). each | I have |

  page = doc.pageAtIndex (i)

  page. String.to_s = ~ /VMA_\\S * /.

  name = $&

  name unless

  "puts \"no corresponding to the string in the page #{i + 1} of #{path}------".

  # next skip this page

  end

  Doc1 = doc # PDFDocument.alloc.initWithData (page.dataRepresentation) for this page

  less than doc1.writeToFile(\"#{outdir}/#{name}.pdf\") "

  "puts \"failed to save the page #{i + 1} of #{path}------".

  end

  end

  end

  EXPRESSIONS OF FOLKLORE. "

  end script

  say o to run

  end _main

  Hello

  You can save the script as a script compiled in applescript

  ~/Library/Scripts/Folder Action Scripts
  

  and assign it as a folder action script in the hot folder. Specify the destination directory defined in. DESTINATION | property at the top of the script.

  * Note that the destination folder cannot be the Hotfolder.

  To test the code as a stand-alone script, you can simply run the script in the Script Editor and it will allow you to choose the PDF files by the dialogue.

  property |DESTINATION| : ((path to home folder)'s POSIX path & "Desktop/hot") as POSIX file as alias -- alias of destination directory
  
  on adding folder items to d after receiving argv
      if d = |DESTINATION| then
          display dialog "Folder Action :" & return & ¬
              (path to me)'s POSIX path & return & return & ¬
              "The destination cannot be the hot folder." with icon stop
          error number -128
      end if
      _main(argv)
  end adding folder items to
  
  on run -- # for stand-alone test
      _main({})
  end run
  
  on _main(argv)
      (*
          list argv : list of alias of source PDF files
          *property |DESTINATION| : alias of destination directory
      *)
      script o
          property aa : argv
         
          if (count aa) = 0 then set aa to choose file with prompt ("Choose PDF Files.") of type {"com.adobe.pdf"} ¬
              default location (path to desktop) with multiple selections allowed
          set my aa's beginning to my |DESTINATION| as alias
         
          set args to ""
          repeat with a in my aa
              set args to args & a's POSIX path's quoted form & space
          end repeat
         
          considering numeric strings
              if (system info)'s system version < "10.9" then
                  set ruby to "/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby"
              else
                  set ruby to "/System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/bin/ruby"
              end if
          end considering
          do shell script ruby & " <<'EOF' - " & args & "
  require 'osx/cocoa'
  include OSX
  require_framework 'PDFKit'
  
  outdir = ARGV.shift.chomp('/')
  
  ARGV.select {|f| f =~ /\\.pdf$/i }.each do |f|
      url = NSURL.fileURLWithPath(f)
      doc = PDFDocument.alloc.initWithURL(url)
      path = doc.documentURL.path
      pcnt = doc.pageCount
   
      (0 .. (pcnt - 1)).each do |i|
          page = doc.pageAtIndex(i)
          page.string.to_s =~ /VMA_\\S*/
          name = $&
          unless name
              puts \"no matching string in page #{i + 1} of #{path}\"
              next # ignore this page
          end
          doc1 = PDFDocument.alloc.initWithData(page.dataRepresentation) # doc for this page
          unless doc1.writeToFile(\"#{outdir}/#{name}.pdf\")
              puts \"failed to save page #{i + 1} of #{path}\"
          end
      end
  end
  EOF"
      end script
      tell o to run
  end _main
  

  Briefly tested under OS X 10.6.8.

  Good luck

  H

• NOR-DAQmx for LabView 2010 SP1

  I am looking for the installation of NOR-DAQmx for LabView 2010 64 bit SP1 package?

  Yes.  Do not change the destination directory.  The drivers will be add support for any version of LabVIEW, you installed from LabVIEW 2010.  This includes 32-bit and 64-bit versions.