destinations and services on-the-fly?

Similar Questions

• How to for NAT internal IP address so it only gets teeth when you go to a particular destination and is also the United Nations concerns

  Hi all

  I have the following 2 sites. A branch, a data center.  The two race NPA 8.3.

  (192.168.120.1 (L3SW) - ASA)-PUBLIC INTERNET-(202.xxx.xx.242) ASA

  DATA CENTER                                                                           BRANCH

  I need 192.168.120.1 to be able to do a ping 202.xxx.xx.242 for the purpose of the SLA, which means that I need to NAT to break the internet. However, I also need to be able to SSH to 192.168.120.1 during several VPN tunnels to other branches on private subnets.

  How can I configure a NAT to my ASA rule so that 192.168.120.1 tries to talk to 202.xxx.xx.242, NAT 192.168.120.1 to the internet, but all other destinations than 192.168.120.1 should talk to the service (IE LAN via VPN), do not NAT?

  Hello Dean,

  I would recommend a NAT twice basically is the same terminology as a 'political NAT', you can specify that your source host will be translated to some IP only when it is addressed to some destination or destinations, so, basically, you can create a network of the object with the IP address of the source, another network object with the public IP address you want to use to translate the 192.168.x.x address and then click the destination network object, so it will be like this:

  network of the IP_192.168.120.1 object

  Home 192.168.120.1

  network of the TRANSLATED_IP_FOR_192.168.120.X object

  host 99.99.99.99 -> an example

  Network IP_202.XXX of the object. XXX.242

  202.xxx of the host. XXX.242

  NAT static IP_192.168.120.1 TRANSLATED_IP_FOR_192.168.120.X destination (indoor, outdoor) static source IP_202.XXX. XXX.242 IP_202.XXX. XXX.242

  In this way traffic that comes 192.168.120.1 form through a VPN tunnel, it will not be matched this NAT statement, since this statements NAT says that he will only translated when switching to the 202.XXX. Address xxx.242, now you can run a package tracer and see how it goes,

  Please note and hides as correct this answer if it helped you, keep me posted!

  Thank you

  David Castro,

• Satellite 2410-303: Question about software update and service in the northern part of Cyprus

  First of all, I have a Satellite 2410-303 and I hoped that I can update my toshiba but there is no my toshiba model name in the Download Center. It has 2410-303 in the Download Center and I install the update on my toshiba. This will damage my toshiba?

  Secondly, I recorded my toshiba. I can access my account, then I'll download center update but my toshiba model is not correct (Magnia 550 d isn't my toshiba). I do not have other updates. How can I solve this problem?

  Finally, studying at University of the Eastern Mediterranean in Northern Cyprus. I am waiting for this area, but I could not find any point of service. Is there any point of service in the northern part of Cyprus?

  Thank you very much for interested in my topic and your comments!

  The simple driver update will not damage your laptop but the incorrect BIOS.
  Anyway, Sam is right. The S in the first step means satellite. This is why you must use drivers for 2410-303. These are the correct drivers and they should work on the laptop.

  If you are looking for the right service partner I would say visiting this site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

  You will find a database with ASP together all over the world.

• The Task Manager by clicking Open a list a processes and services in the lower right corner, said. I want to finish the tasks.

  When I hit CTRL + ALT + DELETE and select open the Task Manager to end a task, it will open a lot deals and said services in the lower right. I do not understand how to use it to end task does not. There is no end now and I need to close iTunes quite often because it freezes.

  When I hit CTRL + ALT + DELETE and select open the Task Manager to end a task, it will open a lot deals and said services in the lower right. I do not understand how to use it to end task does not. There is no end now and I need to close iTunes quite often because it freezes.

  I do not have itunes, so I don't know where you can find it from Windows Task Manager.
  Click on process tab > scroll to find (if you know its name), until it clicks > click on end process down to the right.

  Alternatively, here is another way...
  Click on Services tab > click Services at the bottom right > uac prompt > now scroll to find itunes. I don't know how it's called. No doubt itunes.exe > if you find it, click on it > looks to the left, click on stop.

  t-4-2

• Cannot set the vmkernel and service on the same vswitch console with 1 NIC

  I'm currently setting up a new VMWare environment, using Starwind on a 2008 server for shared storage.  The question that I am running is, when I put the vmkernel (xxx.xxx.xxx.177) and the Service Console (xxx.xxx.xxx.178) on vSwitch0 with 1 card NETWORK, I can only ping the service console.  We also use a Cisco ESW 540 24 ports switch. StarWind support says they are sure it's the swithch, no fool, what needs to be changed in this respect.  If I put the VMKernel and the Service Console on VSwitches separate with separate NIC, it works fine.  Any suggestion would be appreciated.

  Make sure that the Cisco switch does not have port security enabled and allows multiple MAC addresses on the same port.

  André

• Installation and Service problems the HORRIBLE customer

  I had endless problems since I tried to buy my 3 months prepaid subscription. My previous subscription expired, I purchased a new one, my account records that I have a subscription expired and new, but I can't launch Dreamweaver (keeps warning me that I have to re - up my subscription).

  Initially, I called Customer Service about 3:00 pm PST, was informed, I would like to be reminded in 10 minutes, but had not yet heard in half an hour. Then, I assumed that everyone was off for presidents day. 45 minutes after I called first, I was called back while I was at lunch. The technician could not even find the account, but he left me on hold for ten minutes, while he looked under my own name. We agreed that he would call me in fifteen minutes after I got back to my office. I have yet to hear back. I tried the technician online, but he blew me too (a 'Shashank', who expressed to me "this concern is not under my expertise, please stay on the line so that I can you give in to the installteam"). I'm still waiting for 16 hours more later to get a response from him.

  Shashank: Hello! Welcome to the Adobe Customer Service.

  Shashank: Please can I have your email address registered with Adobe, while I will review your request?

  Alex: alex@***

  Shashank: Thank you

  Shashank: I know the order number?

  Alex: Where can I find that?

  Shashank: in your email box

  Shashank: do you own subscription?

  Alex: I don't have one today. Are you referring to the original?

  Alex: Yes, three months.

  Shashank: not serious

  Shashank: This concern is not under my expertise, please stay on the line so that I can transfer you to install Team.

  Alex: I entered the serial number earlier this afternoon.

  Please wait while I transfer the chat to the appropriate group.

  You are not currently connected to a representative of cat.

  You are not currently connected to a representative of cat.

  You are not currently connected to a representative of cat.

  You are not currently connected to a representative of cat.

  You are not currently connected to a representative of cat.

  You are not currently connected to a representative of cat.

  You are not currently connected to a representative of cat.

  You are not currently connected to a representative of cat.

  ALL THE WORLD?

  I tried the Customer Service phone again (promised a timeout from 15 to 21 minutes), but gave up after an hour and a half.

  Adobe still has a business model?

  Post an effective solution for future reference:

  Thanks for the info. I looked at your account and your subscription of Dreamweaver is expired so that your creative cloud subscription is active. First of all, I suggest uninstalling Dreamweaver, then reinstalling through creative cloud. If this does not work, you need to uninstall all applications and run the cleaner toolhttp://www.adobe.com/support/contact/cscleanertool.html (to make sure that all the previous DW associated bugs are deleted), then reinstall applications through creative cloud. What is happening is that your app DW is always associate the former (and now expired) subscription and we need to associate with the subscription of the CC.

• vCenter Server 5.1, SSO and Service of the inventory on a single server?

  It is said in articles vmware all 3 roles can be installed for small deployments on a server with enough hardware requirements (2 hearts and 10 GB of RAM and hard drive 100 GB recommended).

  Question is what is considered to be low?

  Can I install all 3 roles on a server for lets say 14 guests and about 200 virtual machines?

  If I have 3 vCenter servers I'd better install all 3 roles on each of the 3 servers. or have a SSO or SSO HA for all vCenter servers?

  The problem is that we want to separate the vCenter by area.

  A big thank you!

  Yes, you can install all 3 roles on onse Server. We installed it on a virtual machine with 8 GB of RAM, 100 GB HD and 4 CPU.

  For the decision on wheter to install all 3 roles on 3 vCenter servers, I recommend you to read the next page.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2032135

  If I should make the decision, I separate completely all 3 areas and thus install 3 with 3 roles vCenter servers. But this does not mean you have to do the same thing.

• Creating lists and collections on the fly?

  I have a set of XML data that has a series of step (see the code example). Now, I have to manually to allow the number of nodes 'step' in my nodes data manager and 'choice' to attribute to the collections of the list of the application to use.
  
  My question is, how do I create a loop to watch the number of children and create a listCollection and entrust the data automatically?
  
  As l0.dataProvider = new XMLListCollection(dp.step[0].choices.choice), where the zero will increment based on the number of nodes in the document?

  This code can help:

• Running Exchange Server application of hotfixes and service pack to the server mailbox without loss of data during the restore?

  People,

  I would like to know how can I safely ask the Exchange Server service pack or cumulative update for the server role mailbox (no DAG) without loss of e-mail during the downtime and roll back the snapshot?

  If I can do the following:

  1. stop all Exchange Server services.

  2. unplug the vNIC on the mailbox server

  3 take a snapshot of the virtual machine

  4. apply the service Pack of Exchange Server / Cumulative Update or Windows Update

  5 reset

  6 reconnect the vNIC, if the server online with no problem, commit / remove the snapshot, if not, then disconnect the vNIC followed to restore.

  would be - this sense being or support for Vmware and Microsoft http://www.vmware.com/files/pdf/exchange-2010-on-vmware-support-and-licensing-guide.pdf ?

  If yu have any other suggestions, please let me know here.

  Thanks in advance.

  Hey AlbertWT,

  I'll start by saying that I would not do.  Microsoft is explicit that snapshots are not supported with Exchange when virtualized.  See below (from Exchange 2013 Virtualization: help Exchange 2013):

  Some hypervisors include features to take snapshots of virtual machines. Virtual machine snapshots capture the State of a virtual machine while it is running. This feature allows you to take several snapshots of a virtual machine and then return the virtual machine to a previous state by applying a snapshot to the virtual machine. However, virtual machine snapshots aren't application aware, and using them can have unintended and unexpected consequences for a server application that manages the data of the State, such as Exchange. Accordingly, making snapshots of the virtual machine to a virtual guest computer Exchange only is not supported.

  Even if we ignore the statement of support from shadow copies that isn't always a good idea.  Here are some things to consider.

  (1) cumulative updates for the Exchange to modify the Active Directory schema.  Roll back the snapshot on the mailbox server is not undo changes made to RFA, which could cause functional supported questions.  See this link to give you an idea of how there is pattern AD updates in each CU Exchange and service pack: the Active Directory in Exchange 2013 schema changes: Exchange 2013 help

  (2) it is possible to send to come during the time you test the update, and if you need to restore you would need a plan to retrieve this e-mail.  Third party services may work, or you can prevent the email to come in your environment completely during this period, but these aren't the ideal solutions.

  A much better solution would be to create a lab environment that is isolated from the production.  You can either take clones of your Exchange and AD VMs and put them in a closed network environment, or create a laboratory and import the structure of your ad if it matches the production.  I think it is a much better way to test than to try to rely on stereotypes in production.

  Hope that helps!

  Matt

• Re: Programs and services that will be installed

  I installed Windows 7 Home 32 on a Toshiba Satellite A210 (no upgrade - new facility) and I then installed all Toshiba drivers from their site. I want to know what programs and services are installed from the three programs:

  -Hardware configuration
  -Utilities
  -Value Added Package

  I have installed all three programs, but I can only find this program:

  -TOSHIBA Flash Cards
  -Diagnostic PC TOSHIBA

  In the settings of "Flash Cards", I can only disable the hotkey function that is not disabled.

  But the F1 to F12 keys still don't work and I can't find Toshiba hardware settings in the control panel.

  So I want to check all the programs and services of the three programs on the laptop.

  John

  It's a little complicated.

  I guess you remember how it works on Vista and I hope you remember that on your desktop it had placed the shortcut for Toshiba Assist. When you open Toshiba Assist you find the hardware and other utilities and tools from Toshiba.

  So you can install help designed for your model of laptop and Vista. I installed it too.

  Value added Package contains several tools and utilities:
  -Toshiba components pilot common
  -Toshiba Utilities
  -Toshiba PC Diagnostic tool
  -Toshiba Power Saver
  -Toshiba Button support
  -Toshiba zooming utility
  -Toshiba Flash cards

  Installation assistance and you will have access to all important and utility tools.

• Can I have "PnkBstrA and PnkBstrB" under the list of exceptions in Windows Firewall?

  Original title: Firewall exceptions

  Before we begin, I would like to thank those who helped me in the past and as it may seem, I ignored, I tend to use the internet services and e-mail in a chaotic way, but if I forgot to answer or acknowledge a contributor I apologize. My question is about two entries in the list programs and services on the tab exceptions in firewall windows PnkBstrA and PnkBstrB, and if I can uncheck and remove them I do not play any type of online games which I am told they are connected?  I use XP (SP3) to House thanks.

  Whack em.

• extraction of xmltype and excluding all the tags of the namespace?

  Hi all
  I am trying to extract the xmltype column in another xmltype column in another table.
  
  Select xt.attachment_content, xt.attachment_type, xt.attachment_format
  OF document_version dva.
  XMLTABLE)
  XMLNamespaces ('http://oracle.com/test1/1.0'),
  "AttachmentList/attachment.
  
  PASSAGE document_content
  COLUMNS
  attachment_content path of xmltype "content."
  path of varchar2 (100) to attachment_type 'type,'
  XT attachment_format varchar2 (100) path 'format')
  
  This query returns results, BUT the content has tags and namespaces in the game too. I just want to return the content than ANY version of xml without xmlns: (xmlnamespaces) and etc.
  
  Please help me how to do this.

  OK, thanks for the effort, however, this is not a test case from work, by far...

  The input XML is not valid because you probably just copied the version without escape sequence and paste here.
  The cuts you made in the XML load make invalid too.

  The query is not true either, syntax XMLNamespaces is bad, but also the XPath expression.

  I understand that you want to present a simplified scenario based on but you are in fact wasting time by not giving something that we can run.

  Now, if I have a query document_attachments table content column displays the results, but with all the tags of the namespace and etc.

  As said, I doubt that the request you give will never recover anything, but that is a different problem.

  What I would like to know because my first answer is why namespaces are a problem for you? They are part of the document and it is easy to deal with them once we know how to do it.

  For example, this retrieve the value of the content as CLOB (plain text) and convert on the fly of XMLType:

  INSERT INTO document_attachments (doc_id, content, type, format)
  SELECT dva.doc_id
       , xmlparse(document xt.attachment_content) as content
       , xt.attachment_type as type
       , xt.attachment_format as format
  FROM document_version dva
     , XMLTable (
         XMLNamespaces(default 'http://optimal.com/SP/2/RandPCommon/DocumentStore/GatewayRequestStore/1.0')
       , 'AttachmentList/attachment'
         PASSING document_content
         COLUMNS
           attachment_content clob          path 'content'
         , attachment_type    varchar2(100) path 'type'
         , attachment_format  varchar2(100) path 'format'
       ) xt
  ;
  

  Now, the contents column is:

  
  
   
  
    
  
     6
     6
    
   
   
    
     /1/2/28/8
     /SSRF/Body/Location[@serial='USA:AF:LT:4341b33adc0442a']/Address[1]/@country
     
      
      Brownsville
      U
      TX
     
    
    
     /1/2/27/8
     /SSRF/Body/Location[@serial='USA:AF:LT:7c5c3cef2cf74ef']/Address[1]/@country
     
      
      Brownsville
      U
     
    
    
     There is no successfully completed Engineering Analysis attached
                to this proposal. Please run an an
     There is no successfully completed Engineering Analysis attached to
               this proposal. Please run an analysis or provide a detailed
               justification for omitting it.
     Prepare & Submit Workflow Rules
    
    test
   
  
  

  Is this OK so far?

  What do you do next with the content column?
  Yet once there is no need to remove any namespace, or if he really exists, please explain what requirement business dictates who and how the attachment must be treated thereafter.

  Published by: odie_63 on May 26, 2012 19:07

• Applications and services in CC...

  Some applications and services on the site of the CC are not visible in the CC desktop application. I have a trial account, and for example, I can't see 'history like' in the CC desktop application. Means that desktop application is not completely synchronized with CC accounts? So it seems that we are unable to use desktop application for every job in a CC account... right?

  And secondly, I also can't see 5 Lightroom in the CC site. LR 5 is not included in the CC?

  Hi AttilaHan,

  Not all applications are available when you use a free trial subscription. The two you cited LR 5 and Adobe Story Pro are examples. If you have changed to a paid subscription, they become available.

  Kind regards

  Abhijit

• I just replaced my battery and it says 'battery of Service '? The battery is new. I need to reset something?

  I just replaced my battery and it says 'battery of Service '? The battery is new. I need to reset something?

  Try resetting the SMC http://support.apple.com/kb/ht3964

• My ipad was stolen and it was related to my iphone 5 but now I cant access my iphone it shows NO SERVICE ALL THE TIME I TRIED to RESTART IT but no success please help

  Good day family

  My apple iphone has been linked with my iphone 5 when I was robbed they took my apple ipad. I reported stolen and it was blocked but now my iphone 5 is also blocked.it shows NO SERVICE all the time I have swiched on sometimes it works for a N O SERVICE Mode.Please hour pass and give.

  Hello

  You need to contact support.apple.com

  See you soon

  Brian