Detailed messages on the homescreen OBIEE connection failed.

Similar Questions

• My user account will not open a session. message, said the user profile service failed.

  Two days ago, I try to connect my messgae of acct user popped up of service user profile service failed to connect. Have the other 3 acct and they connect without any problems.  How can I fix it?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.

  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have visited
  logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Send warning message when the iPads are connected?

  OSX can be configured to send an alert message when an iPad is plugged?

  I want to receive an alert message when iPads are connected to the Mac so that I can remote log-in updates and run on iPads.

  Can write an Applescript application called iTunes that you send an email and then calls the real itunes.  It is a concept.  Don't know if you can get the real iTunes work.

  ---------------------------

  The real way to make updates is to get an mdm that supports wireless updates.

  MDM - Mobile device management

  MDM

  AIRWATCH, Meraki, MobileIron, Profile Manager on OS X Server or Zenprise

  For a comparison, see this page:

  http://www.enterpriseios.com/wiki/Comparison_MDM_Providers

  AIRWATCH

  http://www.Air-Watch.com/

  Configurator of Apple and Apple Profile Manager

  "Apple Configurator makes it easy for anyone to mass configure and deploy iPhone, iPad and iPod touch to a school, company, or institution."  Limited to Mac.  Connects via a USB cable.
  http://iTunes.Apple.com/us/app/Apple-Configurator/id434433123?MT=12

  «Profile Manager allows you to configure the devices OS X and iOS if they re implemented to use the resources of your company or school and settings, apps and books as your organization needs.» Profile Manager creates parameters and preferably bundles to devices and deploys to the devices via the Mobile Device Management (MDM). "Requires OS X server.
  http://www.Apple.com/UK/support/osxserver/ProfileManager/

  GroundControl is an alternative to the configurator to Apple. "IOS provisioning enterprise-wide, updated, surveillance, smart policies... all in the cloud."

  https://www.groundctl.com/

  Meraki - A free MDM [expect lots of e-mail and phone calls on the updates]

  Read the presentation of the product.  Click "get started now" to register.

  https://Meraki.Cisco.com/products/Systems-Manager/?ref=YZRzCR

  Video on how to install and use Meraki.

  https://Meraki.Cisco.com/blog/2012/08/how-to-get-the-most-from-Meraki-systems-Ma swim.

  MobileIron

  http://www.MobileIron.com/

  Zenprise

  http://www.Zenprise.com/

• How to display a message to the customer that connects?

  Hello

  I am fairly new FMS and really trying to learn about it. My question is simple, as I hope;

  I want a message to appear to a client when they connect that the maximum number of users has been reached. I have it set for 5 users and so I would like that when the 6th user tries to sign in to see the video, a small box will be pop up and say "sorry, Max users has been reached. Please try again in a few minutes. »

  I could develop something and get it through orders of the trace output by following a tutorial online, I saw, but I never got any sort of message box, that I built to jump to the top.

  Please help someone?

  Your code was not OK try this one.

  var ns:NetStream;

  var nc:NetConnection = new NetConnection();

  nc.addEventListener (NetStatusEvent.NET_STATUS, onNetStatus);

  NC. Connect ("rtmp://fms");

  function onNetStatus(event:NetStatusEvent):void {}

  trace (Event.info.code);

  Switch (event.info.code)

  {

  case "NetConnection.Connect.Success":

  NS = new NetStream (nc);
  ns.setBufferTime (2);

  myVideo.attachVideo (ns);

  NS. Play("MP4:BYN_e06_1.F4V");

  status_txt. Text = "you're: connected."

  where_txt. Text = "from:"+ Num; '.

  break;

  by default:

  status_txt. Text = "sorry, maximum users has been reached. Please try again. « ;

  break;

  }

  I suggest you to go through the documentation that comes with the FMS, there are many examples on how to create netconnection and netstream and then stream video. It will really help you.

  Kind regards

  Amit

• No Signal message when the monitor is connected to the graphics card.

  Thus, after posting this problem on different forums, I was told that my power (300w) was too low for my Radeon HD 7570 I tried to install. After you install a 585w power supply, the problem is still happening.

  Model: HP Pavilion h8 - 1240 t

  OS: Windows 7 64-bit

  Error: Monitor says "no signal" when connected in the PCI slot where is the graphics card.

  Changes: this always happened, did not get a single card to run this stupid computer!

   

  The DVI cable is completely plugged the monitor into the PCI slot and the graphics card is fully in. The fans on the graphics cards spin but it is not detected at all. It does not appear in Device Manager.

  Data sheet:

  I7-2600 3.4GHz

  8 GB RAM

  Orion 585w PSU

  Radeon HD 7570 (it didn't come with the computer, otherwise it would work...)

  PEGATRON CORPORATION 2AD5 1.03 (I guess that's the motherboard)

  No. I went to Dell and downloaded THE drivers that ACTUALLY work. Computer restarted and everything works fine.

• Get the "Local WMI connection failed" error when you try to run bbntcfg

  Wondering if anyone is aware of this error and what might be required to occur. The whole service of 4.40 BBPE is dying and when I try to run bbntcfg I get this error. I use this on a Windows 2000 Server (yuck, I know).

  The service fails with the following error;

  The Big Brother Professional Edition Client 4.40 ended in unexpected ways. He did this 3 times. The following corrective action will be taken in 0 milliseconds: no action.

  And I believe that these previous posts may be related as well (occur in the same minute);

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  Please try first:

  from a command window, run:

  net stop winmgmt

  CD %windir%\system32\wbem

  referential repository.old Ren

  net start winmgmt

  If the problem is not resolved, continues:

  winmgmt /clearadap
  ammo winmgmt
  WinMgmt /unregserver
  WinMgmt/regserver
  WinMgmt /resyncperf

  If the problem is still not resolved, continues again:

  CD %windir%\system32\wbem
  Mofcomp.exe cimwin32.mof
  Regsvr32 /s wbemupgd.dll
  Regsvr32 /s wbemsvc.dll
  Wmiprvse/regserver

  Hope this works now :)

• Works fine in Dreamweaver, when I up load on the hosting company connections fail

  Hello

  I nave a website http://www.onenessfirst.com/ on my page of Animation, I have several of my animations identified by name. Everything works well in Dreamweaver. I check completely. When I download on Aabaco, my server, connections that break everything and the animations are 404 not found. What's up?

  I found your problem. At least one of them. You have no directory in the images directory, called 'animations', so the links are impossible:

  entertainment http://www.onenessfirst.com/images//heady1. MP4

• Update project in the App Builder - connection fails

  Ive cleared the Builder app on the second attempt to download files as sign in sign and IPA download does not work.

  Ive done the following to clear the issue.

  Do not publish and republish App. -the work shows with the new correct modification date

  Check titles - titles of all the folios/articles are all consistent character list below

  As in understand this developer certificates don't need to change once established.

  Any ideas to allow download .ipa files so I test and you can return it to apple?

  There are two questions:

  First of all, make sure that the names of your article/folio contains no special characters. We were able to fix the error "sign, please try again" by removing all special charatcers in folio/article names. Example of special characters are"&" "o" "a" "()", etc.

  Follow link below: http://helpx.adobe.com/digital-publishing-suite/kb/download-sign-faile d.html

  Second, maybe certificate problem.

• Tecra M5 - annoying popup messages when fails the automatic BT connection to headset

  Hello

  I use my Bluetooth from Sony headphones to work with my Tecra M5 laptop lately and there is a boring bunch of message that keeps popping up.

  In the bluetooth settings, I ticked the box "auto login feature will be validated. This causes the headset to connect automatically and it works a treat.

  But, when I bring my laptop home I did more than my helmet with me and about every 5 minutes my laptop keep showing these annoying messages popup at the bottom right of my screen saying the "auto login failed, please ensure that your bluetooth device is turned on etc...". ".

  Sometimes it gives me a prompt in the lower right of the screen asking me if I would like to disable the "automatic login" function for headphones.

  Is it possible to disable these popup messages annoying when my headphones are not detected, without having to turn off the option "auto-connect"? I want to leave the function "automatic login" enabled so when I get back to work and back on my headset again, it will be always connected automatically.

  But when I get home, I wish I could continue to do stuff on my laptop without contstantly being bothered by these electronic popup. If there is some sort of registry setting or something to turn them off, that would be great.

  I downloaded and installed the Blueooth battery & Driver Version 6.40

  See you soon

  Toshiba gave me a beta version of the next Bluetooth stack. There the option you are looking for. Just disable the setting in
  "Bluetooth-> Bluetooth-> Options-> Audio settings-> display a message when the device is connected."
  So just wait until this version is available for download.

• Since this morning my Thunderbird (v24.4.0) does not load any new messages. It gives me an error message saying that the RETR command has failed.

  My T-bird was working fine last night but this morning I get an error message starts "the RETR command has failed..." "whenever I try to retrieve new messages (he tells me there are 23 of them), I get this error message. I use the version above on a Windows XP machine running.

  No one here has the ability to do anything to your email address. Your email provider was just having a bad day and it is corrected now.

• View the exception details message in af:messages

  Hello!
  
  I use BC ADF 10.1.3.3. I created an event to support bean that calls the Row.validate () method as before I call commit, I want to ensure that all validation is passed or the user is redirected to another page without committing the changes. Well, after the call to Row.validate I catch the exception. But the problem I faced is I want to display the detailed message for the detected exception that contains the actual commit message that I set on the layer model. If I use only Exception.getMessage () I get the Houston-27024: could not validate a row with... message.
  
  But using the Exception.printStackTrace I can see in output JDeveloper console something like this:
  
  oracle.jbo.RowValException: 27024-Houston:
  +...+
  + java.lang.Thread.run(Thread.java:595) +.
  + # # 0 in detail.
  oracle.jbo.RowValException: THE ACTUAL COMMIT MESSAGE I DEFINED ON the LAYER MODEL
  + oracle.jbo.rules.RulesBeanUtils.raiseException(RulesBeanUtils.java:206) +.
  +...+
  
  
  Is there a way I could get the message detail 0 in my Catch block in the bean to support? I thought that using getStackTrace could help, but there are only records of "+ java.lang.Thread.run(Thread.java:595) + ' and not retail 0 part.
  
  I hope my question is clear and there may be another approach to achieve this goal.
  
  I'm doing it since the opening of the jspx consists of all the attributes of the line of the VO, but on the layer of model validation is performed on these attributes, anyway. I therefore need to display a massage that the process cannot be completed and it would be great to see the real problem instead of the Houston-27024 message.
  
  Thank you in advance,
  Kind regards!
  
  BB

  Hi BB,

  Have you tried to call getExceptions() on the exception of Houston?

  John

• The request to connect to the Cisco Unified CCX application server has expired.

  Hello community Cisco!

  We currently have some question about the CAD. Several officers receive a timed mistake when they connect in CAD. The scenario is like this:

  1. agent tried to connect and receive an error message:

  "The request to connect to the server to application Cisco Unified CCX timed out. Please make sure your system is online and try again.

  2 agent hit retry and an error message is displayed:

  "Another agent has connected with the same extension. Your agent's office will sign, and then the application closes. »

  3. agent hit the OK and try to connect again, another error message appears:

  "The specified ID is already connected to an extension. You want to disconnect the ID so you can connect? »

  After continuing to try, agent is properly connected. However, the problem is intermittent and occurs on most of the agents. Please see accessories picture for reference.

  In addition, there was once the CUCM GUI is unresponsive to access (intermittent), although the ping on the server is ok.

  The system version and other info:

  * 9.1.1.20000 - 5 CUCM

  * UCCX 9.0.2.11003 - 44

  * LDAP is NOT used to connect to the CAD and the phone.

  Hope you can help me. Thank you!

  -Kenneth

  There was also, once the CUCM GUI is unresponsive to access (intermittent)

  This is the main reason for questions that your agents are faced to the it. If access to CUCM GUI is still slow, then restart the tomcat service using the service utils restart Tomcat Cisco of CLI and check whether or not it solves the problem.

  Preferably, I restart tomcat service on all servers of CM and then check.

  Concerning

  Deepak

• The remote procedure call failed and did not run + user problem?

  Good so I have a Sony VAIO with Windows 7 Home Premium 64-bit, 4 GB RAM and 640 GB hard drive. During his first installation, VAIO asks you to name your computer so I called him "CARINA" and everything worked perfectly.

  However, we wanted to change the main username in the 'OSCAR', so I went to the control panel > users and this has changed. I thought that everything was great, because when I open the Start Menu, top-right, he says "OSCAR". After more research in the area of research, two things appears under the name 'CARINA': a 'user profile', I think, who had a small square color sky-blueish. and a folder with a lock on it. I tried clicking on the user 'CARINA' first profile, and it just opened what, in my view, is a Properties window 'CARINA '.

  But when I clicked on the folder "CARINA" with a lock, it opened my libraries. But get this: at the top, he said not "CARINA", but "OSCAR". I thought it was odd he did that so I told the computer to delete the folder with the lock named 'CARINA '. As soon as I realized it was a huge file and a gazillion files were there (real libraries), I canceled it, he wants to immediately restore the Recycle bin. But nothing appears on the trash, or I can't enter either because an error saying "the remote procedure call failed and did not execute".

  But the mistake has been made and now it does not work. The Start Menu appears, but I can't click on anything or use the search box. When I click on my library of records, the same message appears ("the remote procedure call failed and did not execute") or when I enter 'Open action center', he said ': {266EE0668-A00A-44D7-9371-BEB064C98683}\5\::{BB64F8A7-BEE7-4E1A-AB8D-7D8273F7FDB...» The remote procedure call failed and did not execute. " Programs on my toolbar work, such as Chrome or Windows Media, or I can change the volume with the icon in the lower right, but I can not enter in 'Computer', my libraries, or anything else. When I open the the TASK Manager, under processes, they are all under the name CARINA. If I stand on the top of the "explorer.exe" process, and I do a right-click on top of CARINA > properties > Security > there are 4 listed users:

  • SYSTEM
  • Administrators (CARINA-VAIO\Administrators)
  • Users (CARINA-VAIO\Users)
  • TrustedInstaller

  The computer has a backup (if I have a backup of an another VAIO Windows 7 Home Premium 64 - bit if necessary) and I'm afraid to stop in case it does not start again. :(

  Any help? What can I do?

  Hello

  Method 1:

  Follow the steps mentioned below.

  (a) type services in the start menu search box.

  (b) in Services, scroll down to "Remote Procedure Call", and make sure the status 'Started' and set to automatic.

  (c) the second "RPC Locator' must be set to"manual ".

  Method 2:

  I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Note: I suggest you check manage user accounts to check how many user accounts are present.

  a. Click Start.
  b. go to the control panel.
  c. click user accounts and family safety, and click on user accounts.

  Check how many accounts user is present.

  Method 3:
  I suggest you to create the new user account and check if the problem persists.

  Create a user account
  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  If everything works well in the new user account, then I suggest you to transfer data and settings to the fixed aid corrupt profile.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-in/Windows7/fix-a-corrupted-user-profile

• Others become the iTunes update server message connection failed?

  Others become the iTunes update server message connection failed?

  My iPad has the logo of iTunes with the load icon and cannot update or restore on computer at home.

  All internet connections are very good.

  I'm having the same problem I tried 3 cables of computers 4 and my ipad won't restore or update.

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)