Detect and respond to messages from the BlackBerry Instant Messaging by program

Similar Questions

• BlackBerry Smartphones Media Manager View / transfer of images from the Blackberry

  Recently, two Workstations have had their media manager stop working. When the blackberry is connected to the computer and looked in the Media Manager, images on the blackberry developed as gray with a tiny band of pixels in the image at the top. When the images are transferred to the PC they hold it. When images are sent from the blackberry to the PC images find very well.

  We have reinstalled nothing doesn't.

  Workstations are 2 XP with all service packs except SP 3. Desktop BlackBerry 4.3

  I installed 4.5 just above the previous version and seem to have the issue resovled. The interface is substantially different.

• Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any?

  Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any? I don't know how to resolve this issue, if someone could point me in the right direction.

  Have him create a id Apple here- create and start using a Apple - Apple Support ID, and then both you can create an album-photo sharing Photo Sharing - Apple Support iCloud

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• How can I get the second and third highest salary from the emp table

  How can I get the second and third highest salary from the emp table in the ecah Department

  SQL> ed
  Wrote file afiedt.buf
  
    1  select empno, ename, sal, deptno
    2  from (
    3    select empno, ename, sal, deptno, dense_rank() over (partition by deptno order by sal desc) as rn
    4    from emp
    5    )
    6* where rn in (2,3)
  SQL> /
  
       EMPNO ENAME             SAL     DEPTNO
  ---------- ---------- ---------- ----------
        7782 CLARK            2450         10
        7934 MILLER           1300         10
        7566 JONES            2975         20
        7876 ADAMS            1100         20
        7499 ALLEN            1600         30
        7844 TURNER           1500         30
  
  6 rows selected.
  
  SQL>
  

• My gmail and Icloud accounts disappear from the list under "Mailbox store" in the mail. When I try to recreate my gmail account using the "new mailbox...» "I get the message"this account already exists. " What can I do to recover my mailboxes.

  I use YOSEMITE 10.10.5.

  My gmail and Icloud mailboxes (and several smart mailboxes) disappear from the list under "Mailbox store" in the mail. When I try to recreate my gmail account using the "new mailbox...» "(using the sign on the side down and to the left of the screen in Mail +) I get the message"this mailbox already exists. ». What can I do to recover my mailbox?

  Restart the Mac and Mail.

• iPad and iPhone 6 disconnection from the Wifi after IOS 10 improvement

  A problem with maintaining connectivity to my home wifi network, I noticed on my iPad and my iPhone 6.  I'll do an alert on the iPad (which is Wifi only, not LTE) that it cannot detect the Internet. He sees my router but says 'no Internet connection '.  Same thing is happening with the iPhone 6, which translates by he's going to LTE and eat in my data plan.  In both cases, I have to re - start devices and reconnect to my wifi network.  I'm having no problems with non - IOS devices (Samsung Nook, a Roku player and a Smart TV) with my wifi network at home - two Apple devices I am owner of running IOS 10.  Is there a problem with the maintenance of wifi connections?

  Hello rm2static,

  Thank you for using communities of Apple Support. It is my understanding that your iPad and iPhone 6 have been disconnect from your home network after updating to iOS 10. I can surely see how it would be about, so much more than other devices are connect well. I'm happy to help you to get this resolved with you.

  First of all, I recommend you to reset the network settings. Tap Settings > general > reset > reset network settings. This operation brings back all the network settings to the default settings, including the Wi - Fi networks and passwords, cell settings, VPN, and APN.

  If the problem persists, try with another Wi - Fi network. Additionally, make sure that your Wi - Fi router has been updated with the latest firmware.

  See you soon!

• How to distinguish between couples that comes from my TX CAN oppose and frames which comes from the network?

  HY,

  I have an object can pass data to the specific id.

  I expect to get frame from the network with IDs and similar data.

  How will I know that the data came from the network?

  (If I listen to the data of the CAN Interface, I can't distinguish the data that I convey and between data from the Internet)

  Thanks in advance,

  Aviad

  Since you are using NI-CAN, series 1, which does not support no matter what Self-reception, I assume you are using two ports CAN... make your normal transmission and the other to listen to the frames of the CAN bus?

  If this is the case, the only option I see for you would be to compare the charge received with the load transmitted to detect the images you send. This will only work if you send and receive different payloads, but it's probably something that's generally true. If it is false, then you really have no good option with the 1 series (or even series 2) and NI-CAN.

  We have a different product, OR-XNET, which provides a forum for independent reception (such as series 2 NI-CAN), but when you receive the framework that it contains a flag that indicates if it was received from the network or received through self-reception. It's of course far easier (and probably only guaranteed) way to achieve your goal.

• Import music from the BlackBerry smartphone to my windows media player

  I have music on my blackerry 9670 I want to import into my Media Player and I don't know how to do. When I try to sync, it wants to download music in the media player on my phone I already have music, but I don't understand how to download from the phone on the media player. If anyone can help, I would apperciate it.

  Thank you

  Hi Ruth,.

  Windows operating system you are using?

  If you are using Windows 7, you can see the following items to synchronize the phone Blackberry with Windows media player.

  Set up a device to sync in Windows Media Player

  Windows Media Player sync: frequently asked questions

  Alternatively, you can visit the Blackberry support links:

  On the transfer and synchronization of media files

  How to manually transfer files between a BlackBerry smart phone and a Windows computer

• Photo and video of the wizard import and library in Windows 7 "is not" photos and video previously imported from the iPhone

  I am trying to import photos/videos from my iphone to my Win 7 PC.  I imported the photos from my iphone a few days ago, but not a not erase them the iPhone when I imported.  Now I want to re - import these pictures and delete them, but I can't.  Apparently, the Win 7 photo/video import wizard (and photo gallery of Win) remembers if you have already imported some photos, and if you have, it doesn't let you "import" them later.  He can't even see them - it just says no: "no new pictures or videos on this device" or similar.  Is there a way to disable the photo how the Import Wizard remember already imported photos, so I can just import all the photos that are on the iphone, regardless if they were imported before?

  My biggest problem is that always seems to be no easy way to delete all the photos on an iphone using Win 7, unless you remove them from the iphone as you download them on your PC.  Unfortunately, because I have already downloaded the photos without removing iPhone, the photo Import Wizard is not even 'see' the most and won't let me not re - import (allowing me to erase from the iphone).

  A related issue - I think I should be able to browse my iphone through Windows Explorer image files and copy them to my computer, everything as I would by plugging into any camera to my computer.  Win 7 seems to detect the iphone OK device in Windows Explorer, but when I browse the image files they are empty (even though there are hundreds of photos on the iphone).

  I've been struggling with this for hours, and it shouldn't be this hard.  I'm a PC user since a long time, but new on Win 7 (I can't find where everything is more) and relatively new to iPhones.  Help?

  First, you must use iTunes to * manage * photos and music * on * your iPhone. You
  can't do what you want to use anything native to Windows 7. Or with Windows Live
  Phot Gallery.
   
  iTunes is actually pretty intuitive when it comes to synchronization of content.
   
  On Sunday, August 15, 2010 22:58:26 + 0000, rsgibbygibson wrote:
   
  >
  >
  > I try to import photos/videos from my iphone to my Win 7 PC.  I imported the photos from my iphone a few days ago, but not a not erase them the iPhone when I imported.  Now I want to re - import these pictures and delete them, but I can't.  Apparently, the Win 7 photo/video import wizard (and photo gallery of Win) remembers if you have already imported some photos, and if you have, it doesn't let you "import" them later.  He can't even see them - it just says no: "no new pictures or videos on this device" or similar.  Is there a way to disable the photo how the Import Wizard remember already imported photos, so I can just import all the photos that are on the iphone, regardless if they were imported before?
  >
  > My biggest problem is that always seems to be no easy way to delete all the photos on an iphone using Win 7, unless you remove them from the iphone as you download them on your PC.  Unfortunately, because I have already downloaded the photos without removing iPhone, the photo Import Wizard is not even 'see' the most and won't let me not re - import (allowing me to erase from the iphone).
  >
  > A related issue - I think I should be able to browse my iphone through Windows Explorer image files and copy them to my computer, everything as I would by plugging into any camera to my computer.  Win 7 seems to detect the iphone OK device in Windows Explorer, but when I browse the image files they are empty (even though there are hundreds of photos on the iphone).
  >
  > I've been struggling with this for hours, and it shouldn't be this hard.  I'm a PC user since a long time, but new on Win 7 (I can't find where everything is more) and relatively new to iPhones.  Help?
   

  Barb Bowman

  http://www.digitalmediaphile.com

• BlackBerry Smartphones is it possible to see my phone numbers and addresses I saved in the blackberry Desktop Manager

  I know it's maybe a silly question - but I was finally able to download the blackberry Desktop Manager and then back up all the data from my blackberry to my computer via Desktop Manager.  For my own peace of mind, I would like to see some of these data (addresses and phone numbers) just to make sure I did the back up properly.  Is this possible?

  Well, your confidence level in the backup process is your own to define. Maybe if you start the restore process, but do not actually run it, DTM might give you indications of what it contains. I agree that I saw the posts of others who say that the backup was useless... but I have no way of judging if their characteristics are identical to yours.

• SOLUTION for your HP printer disconnect and/or constantly disconnecting from the network

  If you are having a problem printing, scanning or fax with any HP printer because of this be disconnected and constantly disconnecting from the network, here again is the fix!

  I thought that this all after several failed attempts with HP Support, my Internet access provider and various troubleshooting tasks including reinstall the HP software and more and more.  Well, through self teaching on internet and exhausting search for 6 months, I FINALLY thought to it.  OMG!  I'm a paramedic (not IT) and a little computer but far not an expert.  I have all of you here!  Nobody seems to have the answer, but I'm sure that I'm doing it to 97%.  Whatever it is, if it please answer and let me know that it worked for you!  :-)

  It doesn't matter if your printer is installed cable or wireless.  You don't reinstall your software, no recycling power of your printers or your router/Modem.  Your printer is unstable on the network and continues to log out or disconnect from the network it is NOT because the software is glitched, it isn't a firewall problem by saying, is not a router problem, is not a problem with your power cord, because most networks use a 'Beach' and IP addresses for security reasons This kind of "cycles" the IP addresses of the devices to reduce the risk of an attack.  A printer is not a threat, but the 'network' don't own human intelligence, so he does not know this.  Here are my step by step instructions on how to basically your printer address IP (static IP) instead of change back through a cycle so drop your printer on the network or disconnected.

  Funny, if you're someone who has had the elements in your print queue, they will not print, and you turn your printer off and on again and suddenly your print... well documents, join my club.  The reason it works is that when you turn on the printer, it starts with the same IP address before cycle.  If you are someone who is sitting there for a while and all of a sudden your printed documents without changing you something... it is because through the cycle of change of IP address, it hits your printers IP address and the network would allow him to print.  Not very funny, I know.  It took me forever to figure out why my printer would print sometimes, but not always.  Since I thought at this point, I can SCAN, PRINT, and use all the features of my HP software installed like HP, Photosmart Essentials Solution Center.

  On your printer, go to menu/Setup/network and press OK.  In the network menu, print a "network configuration page" so you can see the IP address and other settings of your printer.

  Now, back to the main menu on the screen of your printers.  Or you can go to your web browser and type the IP address using decimal numbers too and this will take you to the web page of your printers.  Choose: setup\network, then press OK.  Look for the IP settings and press OK. Choose "manual" instead of "automatic". Manually enter the IP address it as well as the default gateway that you can see the Network Setup page you printed earlier.  Note: If you manually set the IP Address of the printer, make sure that it is outside the range of your router's DHCP. Otherwise you might encounter a problem with IP addresses on your network duplicate. (If you don't know how to do this, write back and I'll explain).  Don't forget to click "save changes".  Now, restart your computer, and print just what you want.  :-)

  A trick I often use with DHCP network printers:
  In printers and faxes, right-click on the printer and select "Properties".  Click Add a new port.  Choose standard TCP/IP port configured for the host name of the printer. Read the host name of the network printer configuration sheet.
  
  Using my method means that you always connect to the printer even if its IP address changes (which can happen with the dynamic configuration). This does not jeopardize the security of your network.  It shows just your printer to stay put and stop traveling the highway of IP address.  :-)

  The DHCP range is the range of IP addresses that the router distributes automatically as devices to join the network.  The DHCP range is determined by the router and each brand has a range that is set at the factory (which can be changed by you).

  Default value for the DHCP of your D-link is 192.168.0.100 to 192.168.0.199.  Thus, outside the DHCP range est.2 a.99.200 a.254.

  Is a handy cheat sheet attached.

  You can change this interval by entering the router settings page - type the router's IP address in a browser, enter the login information and access the DHCP parameter area (varies depending on router, hunting around).

• "iTunes and App Store" absent from the iPad3 iOS9.3 settings

  My iOS 8.4 iPad3 crashed, so I installed iOS9.3 and restored from my backup in iTunes.

  I had all this work, however "iTunes and App Store" are absent from the iPad settings.

  I know it's supposed to be shown just below "iCloud", but it is not at all.

  I have the App Store icon, and I am able to sign the entry/exit of the app, but I'm unable to set the automatic download option that is usually seen go in the settings.

  Check your Restrictions to see if it has been disabled, settings > general > Restrictions > iTunes Store.

• The faulty Synaptics Touchpad on x 2 13-m121sa Split driver causing frost and lack of response from the mouse

  Edit: I found a solution, scroll down.

  I had problems with my new Split x 2 similar to those already explained in the forums by other users. The symptoms are:
  
  1. unusual hanging or freezing of the mouse pointer on the screen and the use of gestures temperament (two fingers to scroll, zoom, etc.).
  
  2. slowdown in the computer in general; acting lethargic and freezing during light use or after closing the display.
  
  The symptoms seem to change according to the duration of the computer was operated and are affected by the screen from the dock of disconnection/reconnection.
  
  Being very good with these things, I decided to investigate and discovered the following:
  
  The root cause of both problems is the driver for the Synaptics Touchpad. While the latest version available on the HP website (17.0.10.9) seems to solve all unusual freezing of the pointer it has a large memory leak. In other words, when you move it on the touchpad pointer uses the memory of the computer. This is normal, but the problem is that the driver for the touchpad does not return memory; It cannot be reassigned. In other words, after a few hours of computer use (or to have the display closed) memory reached saturation point and the version of the computer to a halt.

  If you encounter the same problem take a look for yourself: open the Task Manager and look at the performance tab. Under the brief entitled you will find a value for "Non paged pool. With the computer idle, this number will not rise, but move the mouse and you will see it go gradually upwards without return. I have confirmed this to be the Synaptics driver using the Windows tool poolmon.exe - the culprits are the Irp and SynT.

  About the solutions, I tried a lot - but there is no absolute solution.
  
  You can uninstall the Synaptics Touchpad driver and the problem will disappear - the memory usage is no longer freezing or high. But unless the driver that the computer is to use the standard Windows driver - there is therefore no multitouch gestures like scroll or zoom in.
  
  I tried to install the generic Synaptics driver available on their site, and the computer will not allow him. Regardless of this, I forced the installation of the driver, but the generic driver does not work with this Touchpad anyway (error code 10). I tried the latest version (17.0.19) and a former one (16.2.21) without success. Even earlier (e.g. 15.x.x) refused to run on the grounds of incompatibility.

  HP support suggested a "Refresh" of system setting to factory, but put aside from the huge inconvenience of time and losing files - I know that this does not work either. Apparently a clean install worked for a single user - but for this you need an installation of Windows or USB disc that I did not - and I am skeptical that it would work anyway.
  
  So now I use the touchpad driver Windows standard without being able to scroll, zoom or use them slide-in gestures of Windows 8.1.
  
  If a representative from HP is reading this, I strongly suggest that this issue be escalated. A simple update to Synaptics could solve this problem which is causing the computers people freeze and lose your support staff time.
  
  TL; DR: Driver HP Touchpad is defective and causes a memory leak. Synaptics has generic drivers do not work. And the standard Windows drivers are not satisfactory.

  SOLVED!
  
  Through my own research I found a solution. While the most recent driver listed under this model is 17.0.10.9 it is actually a newer version which doesn't have this problem: version 17.0.10.16!
  
  I am always disappointed that HP has not suggest this solution themselves, given this driver was published in November 2013! HP if you're reading this: Please allow this driver for this model in your support pages.

  In any case, the solution is:
  
  1. open Device Manager (Control Panel-> hardware and sound-> Device Manager)

  2 in the 'mice and other pointing devices' open «HID Synaptics TouchPad»

  3. in the "Driver" tab, click "Uninstall".

  4. the pointer will disappear - restart the computer

  5. download the new driver from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=uk & lc = on & softwareitem = ob-127354-1

  (if that link fails try to search online for 'synaptics driver 17.0.10.16')

  6. open and install the driver

  I hope this helps. HP, please send my consulting fees through PayPal (!)

• I can print apps but I am wireless and can't print from the web wat I do?

  I'm not sure why I can print apps and I can't print from the web, but I'm not sure what to do ideas?

  my printer is hp photosmart d110 all in one series

  Sorry tkdchick25, I see where you have Win7. Just click the start menu > Control Panel > programs and features > IE9 are updates once installed display that you are here in the list of updates and uninstall.  This will go back you to your previous version of Internet Explorer.  Let me know if it helps.  Thank you!