Detect the first application running

Similar Questions

• I'm not able to install both on the same PC LabVIEW applications. I have uninstall the first application in order to install the second. Is there a way to avoid this?

  I wrote two LabVIEW applications. The first acquires data from three different devices, displays the data and writes it to a file. The second application reads the data and displays it on the screen.

  Can I install the first application and run it, but I can only install the second application if I uninstall the first application.

  Any ideas as to why this is happening?

  You install applications by using a Setup program created with the application builder to LV?

  What LV version do you use?

  You have a dedicated for each installer build script, or do you still want to change the settings of a single build script (which would be a reason for this behavior!)?

  hope this helps,

  Norbert

• How to detect the first keypress entry in VI reloaded

  Hello.

  I use VI popup information in TestStand that I want the user to be able to output/confirm using Enter/Return, and I use a key event down in a structure of the event to detect they keypress.

  But the problem is that when the VI is already loaded in TestStand, the structure of the event does not detect the first keypress enter/return.  If I detect the space bar, it works fine.  But enter/return still need first press key before be detected as a key event down.

  Anyone know why this is?

  Best regards

  Øystein.

  You have the game to focus on the rocker checked in the properties of the button.

  See attachment.

  Kind regards

• I need help to write a script that detects the first instance of a paragraph style and then change

  I need help to write a script that detects the first instance of a paragraph style and then he goes to a different paragraph style.  I don't necessarily need someone to write all this, by the biggest problem is to find how to find just the first instance of the paragraph style.  Any help would be greatly appreciated, thank you!

  Hello

  then try this with your active doc:

  ....................

  myDoc var = app.activeDocument;

  mStyle var = myDoc.paragraphStyles.item ("PS_NameToFind"); change the name to paraStyle

  var mStyle_1 = myDoc.paragraphStyles.item ("PS_NameToChange"); change the name to paraStyle

  var mFrames = myDoc.pages.everyItem ().textFrames.everyItem () .getElements ();

  app.findTextPreferences = null;

  app.findTextPreferences.appliedParagraphStyle = mStyle;

  for (var k = 0; k)< mframes.length;="">

  {

  currFound = mFrames [k] .findText ();

  If (currFound.length > 0)

  currFound [0] .paragraphs [0] .appliedParagraphStyle = mStyle_1;

  }

  app.findTextPreferences = null;

  ................

  Rgds

• Detect the installed application language packs

  Hi all

  Simple question: does anyone know how to detect the language packs installed on a smart phone BlackBerry to my application?

  Thank you!

  The Local.getAvailableLocales () method returns and table of available space (languages) on the BlackBerry Smartphone.

• The Linux Application running on vmware license validation

  Hi all

  We sell our software based on linux on our custom server hardware platform. We intend to make the vmware as a platform officially supported. We will distribute only computer image virtual and clients will have to arrange their own ESX VM server.

  License of our application is generated using eth0 MAC from our server unit. So the license of the application generated for a mac address, on the device only one server (i.e. a license is linked to a server machine). Same license does not work on any other device server due to the mac address verification.

  In ESX VM, mac address can be automatically or manually assigned to a VM vNIC:

  1 auto generated MAC:

  ===================

  We leave the ESX Server to assign an automatically generated mac address to our VM.

  Limits:

  License currently applied to our application will not work in the following cases, which are very likely to occur in the field:

  a. If the virtual computer is moved to another ESX Server, automatically generated the MAC address for this virtual machine will change.

  b. conflict of MAC address of is not guaranteed.

  If a virtual computer is stopped, the same generative MAC may be assigned to another VM that happens while the virtual machine is broken.

  Later when this virtual machine is displayed, it will get a few other self-generated Mac.

  2. manually configured MAC address:

  =============================

  Disadvantages: Possibility of piracy, because the user can specify the same MAC to several virtual machines of our application that runs on different ESX servers and apply the unique license.

  How about the other applications that run on vmware, handle request license validation?

  Is there any "unique globally identify" for each VM instance that can be used to generate and validate the license of the application?

  Kind regards

  Manish

  Licensing could be a problem if based on the MAC address.

  As you wrote if you use a MAC address manually it can also be defined by the user.

  If you use the automatic type, there is another problem.

  And anyway Linux is fairly simple spoof the MAC address...

  Using the properties of the drive, as UUID or special block could simple derivation by cloning the entire disk with JJ.

  CPUID properties can not be used...

  Have you considered using a solution based on the license server?

  André

• Detect the first and last spark of list items

  Hello

  I have a converter item personalized with a background image for each item in a list. the thing is I'm trying to have a different background for the first and last elements (curved respectively) and I don't know how to do this.

  Any help will be appreciated.

  not sure it's the best solution, but:

  You can override the method to data defined in your itemRenderer. Compare the new data for the first and last items in your list. And you set the background depending on the result.

• Click of the mouse stops working after you start the first application

  Hard to explain this problem.  First time I click on what either in an application after computer startup (Word, Excel, etc.) the arrow of the mouse moves, but the click does not, anywhere, not on the desktop, taskbar anywhere.  Accentuates not delayed anything either.  But when I press ctrl-alt-delete, move the arrow down to start the Task Manager and click here, then click Start to work and things get even once highlighted and everything seems normal.  HP Pavilion dv9000t Vista Home Premium 32-bit Intel Core 2 duo, 2 GHz, 2GBDDR, this is going on for about 6 months now.  I just noticed, I installed a trackball logitek, and after installation, it does the same thing.

  Hello

  ·         What is the brand and model of the computer or the mouse?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to run the Microsoft fixit from link and check mentioned below.

   

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• Detect the hardware to run VI

  I'll preface this by saying: I'm in the early stages of learning about Labview, if it's probably obvious by my question.

  I want to just run my VI if a specific device - a NI USB-6229 (Dev1) case is detected, both at the start of the program at any time during the execution of the program I'm only using this device and my program is not intended to be used on any computer other than mine, so I don't think I need a table of product names or device types as I've seen in other posts and examples of programs. I don't want to add anything to the façade. I just want to stop running my VI if data acquisition is not connected or becomes disconnected at any time. Below is what I want to do, if I understand is not the right way to code.

  Any help would be appreciated!

  

  That's how you get the type of device.  Maybe this will help you get started.

  

• I have windows vista wireless portable and a USB connected Lexmark Z645 printer, but the printer does not seem to connect with the laptop when it comes to the first trial run, custom printing print

  Lexmark Z645, connected with USB won´t listen to my laptop windows vista wireless when it comes to the trial run first printing used

  Hello

  read information about the lexmark on this model drivers

  http://support.Lexmark.com/index?locale=en&page=product&ProductCode=LEXMARK_Z645&segment=support&UserLocale=en_AU&FromPage=null#2

  It comes to the installation of vista operating system instance

  Try the forum hardware and drivers

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all

• question of content repository of data control when the webcenter applications running.

  Hi all
  
  I created the content repository connection in my local jdeveloper and
  exposed as a data control.
  data control I display some path and name based on some search criteria.
  
  Whenever I am runnig this application I get following exceptions and no data is displayed.
  Since I have set the connection to the server content locally on my jdeveloper do I need to create some jndi
  the server-side.
  TestContentServer is the content repository connection, that I created in jdeveloper.
  If yes tell me how can I do and how it will port to my data control.
  
  *************************************************************************************
  
  [2010-10 - 05T 09: 34:39.245 - 07:00] [wc_custom] [WARNING] [] [oracle.adf.controller.faces.lifecycle.Utils] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: anonymous] [ecid: 0000IhxFdvi4ulWpTwp2ic1CemrZ0000fT, 0:1] [WEBSERVICE_PORT.name: WSRP_v2_Markup_Service] [APP: application1] [J2EE_MODULE.name: TestContentService-ViewController-context-root] [WEBSERVICE.name: WSRP_v2_Service] [J2EE_APP.name: application1] ADF: addition of the following JSF error: TestContentServer []
  javax.naming.NameNotFoundException: TestContentServer; another name 'TestContentServer '.
  
  ********************************************************************************
  
  Thank you
  Arun

  Fixed it :)
  I had to put the following parameter: IntradocServerPort = 4444

  When I ran my program I saw results in my table. Also, I do not see the warning...

  I used the search instead of getItems operation.
  I need to set the path to "/" and recursive to true in order to see the results in my table.

  When I use the getItems operation and set the path to "/" and run the file, I get a single record with the record of the contribution.

  I notice in your links, you use links to set the path, so I think you want the user to go through the files and update the list when the user selects a folder, correct?

  To test your connection, set the path in your links to the getItems operation to / instead to your EL expression.
  If you have a result, that there is something wrong with your logic. If you do not see a result, there is something else wrong.

  For example, here are my links:

  If you do not see results when "code you" the path to /.
  What type of connection do you use? What is your type of socket RIDC in your area? Web, sleeve or socketssl?

• [JS] [CS4] Search pages to find the first application of a master spread?

  I'm working on a script that search masters spreads for specific text. Once it is found, the master spread name is returned. Now I'm stuck looking for pages to find where this master spread is applied first. Any help?

  var doc = app.activeDocument;
  
  app.findTextPreferences = app.changeTextPreferences = NothingEnum.NOTHING;
  app.findChangeTextOptions.includeMasterPages = true;
  app.findTextPreferences.findWhat = "custom text";
  
  var finds = doc.findText();
  if (finds.length > 0) {
      
            var mspage = finds[0].parentTextFrames[0].parent.name;
            var dpage = doc.pages[0].appliedMaster.name; //This of course is not right, it's returning the name of the master spread for whatever page is currently selected. So how do I set the current page to the page that first uses the found master spread (mspage)?
  

  You will have to look for him.

  var i, dpage;
  for (i=0; i<=doc.pages.length; i++) {
    if (doc.pages[i].appliedMaster == mspage) {
      dpage=doc.pages[i];
      break;
    }
  }
  

  However, if ever he finds one, you will get an error.

• Read a string and detect the first group of 8 numbers

  I want to take an information from the string within a string (file name or folder name)

  The string I want to take is a number of 8 digits (side by side) and it may be somewhere in the middle of the chain.

  For example:

  Large chain A:

  _v_10097822-YVES. SAINT. Laurent.273456YOD02.4176.silk.15113

  Great channel B:

  _v_nkld3sgrf10097822 - YVES.SAINT.LAURENT.273456YOD02.4176.Silk.15113

  I want to always read the 10097822

  How can I do that with the code in a function that returns the number I want to?

  You can try this...

  var numberFromString = getNumbers("_v_nkld3sgrf10097822-YVES.SAINT.LAURENT.273456YOD02.4176.Silk.15113");
  alert(numberFromString);
  
  function getNumbers(str){
  return str.match(/\d{8}/);
  }
  

• Application runs slow after deployment

  With the help of JDev 11.1.1.6

  I have developed a fairly broad application using business components based on tables of Oracle database and it works very well in the IDE.

  The application has many pages.  Each page queries the database when the page is loaded.  The deployed application runs very slowly when you query the database for the first time.

  I checked the database session and it's not slow it down.

  Are there things I can do to improve performance?

  Are there available diagnistic tools that can pin-point where the downturn occurs?

  Thank you

  Raymond

  Additional information: the application is using page fragments and dynamic flow for navigation task.  Most of the time is between the time you click on the link and the time that the page is traversed.

  It is a normal behavior. By default, Weblogic compiles JSPs on their first use, which takes a while. If you want to precompile JSP pages to deploy in time, you must add the following to weblogic.xml application descriptor:

  ...

   

      true

   

  ...
  

  Dimitar

• IMAQ edge tool 2 'first + last edge' - returns the position of the first border

  I use 'IMAQ edge tool 2.vi' with the whole process in order to detect the 'first and last edge. It is obvious to edge coordinates the infromation seeing that it returns only a single point. Where are the coordinates of the last edge detection?

  Note: it detects the edges along the long green horizontal line, so there's at least 2 edges definitevely.

  Thanks for the tips.

  Martin

  Hey Martin,

  This may sound silly, but what happens if you scroll down to the following entry in your cluster? Currently, you can view information for your benefit '0' on the front panel. What happens if you are indexing at the edge '1' of your cluster and therefore see the information on the second edge. Is the cluster of empty when you look at the 'zero' edge? If it is, perhaps, the parameters of your step edge find are too strict and the step does not come back on a second advantage.

  If the problem persists, maybe post your vi sample and a sample picture will help clear things upward.

  I hope this helps!

  -Ben