Detect the touchevents on storm 2

Similar Questions

• How to detect the stop scrolling

  Hi all

  I am currently working with the Bold and Storm, JDE 4.6.0 and JDE 4.7.0 respectively. I have the following question: How can I detect when the user stop scrolling? I have set up a ScrollChangeListener.scrollChanged () that detects when the user begins to scroll through the screen. At the moment, I put a Boolean variable in the true, but now I need to put the same variable to false when the user stops scrolling and I don't know how to do it. Any idea?

  Is there another listener or event that it would be useful for detecting the start and stop scrolling or the movement on my screen?

  Thanks in advance for your reply,

  Gabriela.

  Try to implement a TimerTask with Timer class to check the status of scroll each time.

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• Mac book air cannot detect my iPhone 6, after the cable on my I phone 6 to connect with my mac book air, nothing appear on the mac book. Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.

  Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.

  You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-

• Why, after all these years, can not Thunderbird automatically detect the character encoding

  Judging by all existing messages and complaints on this issue, not to mention the erroneous messages that say that the problem is resolved when it is not, I must conclude Mozilla either does not believe it is a problem or doesn't care to fix it. The key is that there is no way to tell Thunderbird to automatically display the emails in the character encoding format that they were written in. I could understand the case where headers are not properly filled, but I see tons of emails in which coding is clearly in the headers in the message source. You can force, but if you do the menu VIEW-> encoding-> UTF8 character (for example) it doesn't 'glue' If you post another message. But who wants him 'stick' at all times even when? What the average user really wants is to be able to toggle the VIEW-> character encoding-> auto detect the default 'off' value simply "on" and don't have to bother with it more.

  This is a problem that seems to go on forever, and it NEVER happens with other e-mail clients. If there is some backdoor way to actually autodetect working, I would know about it. But more importantly, I think that all users would appreciate it if this was not some secret arrangement 'backdoor', but a choice of menus overall simple for all accounts. Can Mozilla if you please fix this problem once and for all?

  Can you tell us what you heard:
  Tools > Options > advanced > general tab
  Click on Config Editor

  At the top of the search page of type:
  Mailnews.force_charset_override; Value = "false".

  Do you like value... true or false?
  If Value = 'True', double click on the line to switch to "false".

  close window - top right X
  Click OK to save the changes to the Options.
  Close and reopen Thunderbird.

• Tecra S4 does not detect the SSD drive

  Hello together,

  I try to install a Samsung SSD 840 Pro to install in my Tecra S4. But when I try to install Windows 7, there is no detected SSD.

  What can I do that Windows detects the SSD drive?

  With greetings
  Golfbaer

  Hello

  You must add the SATA/RAID driver.
  Download from here:
  http://Support1.toshiba-tro.de/Tedd-files2/0/RAID-drv-20070719134547.zip

  Now, go to the BIOS and on the 3rd page of the BIOS, you can change the RAID settings to * 1RAID-0. *.
  Eventually, you will need to enter the password 1234 + and then press on + ENTER +.
  Now boot from the Windows 7 installation disc.
  Select "Custom Installation.
  Connect the USB where the RAID driver files

  Regarding the selection of the target (SSD drive isn't visible yet) disk, select "Load Driver" and navigate to the USB key, where is the folder with the drivers. Setup for Win 7 now allows you to select a memory stick USB attached.

  Confirm and after that we should include a list of available devices (SOLID-STATE drive)

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Satellite L450 - 173 BIOS cannot detect the HARD whil eLinux disc that ubunto can

  I have a Satellite L450 173.
  The system will display a failure while trying to detect the hard drive then cannot boot from the hard drive.

  However, it can boot from the CD and install ubunto 11.04 (with barrier).
  However, after the success in the installation process, the system cannot start...
  Is this a Bios problem that require an update?

  Hello

  * Question: *.
  Either classified and recognized in the BIOS HARD drive?
  On the first page of the BIOS disk HARD should be listed with details such as the name and the size of the HARD drive.

  If his list, then you must run a HARD drive test. You could test the HARD drive by using a freeware tool called Drive Fitness Test.
  This tool is free and can be downloaded from different pages
  To do this, and if there is error, it means that your HARD drive is malfunctioning.

• Comodo Antivirus has detected the file hi.bat

  Comodo Antivirus has detected the file C:\Toshiba\Drivers\hi.bat as Malware not classified-risk high.
  I don't know what to do. Remove?
  I need help please.

  Hello

  The anti-virus software detected this file which is classified as a high risk Malware.
  Either you would be to delete this file or it would add to the quarantine.
  But these options are provided by Antivirus as well

• Portege 3500 didn't detect the HARD drive in the BIOS

  Hi forum,

  I go out the HARD drive, when I stick to the rear; the BIOS didn't detect the HARD drive.
  How can I configure the HARD drive in the BIOS? The discs i/o isn't editable t option.

  I need urgent help...

  Thank you

  Try to access the BIOS and set the defaults. Don t forget to save the changes. ;)

  A friend of mine had a similar problem and the BIOS default settings has been the key.

  So check it out

• Wk2 will not detect the HDD on Portege 3480CT

  Hi all, been tring this for 2 days now and I have no idea. I want to install win2k on 3480CT but the win2k installation does not detect the hard drive... It will detect WinXP, win98 detects...

  I have the latest version of the bios, I start to think win2k is in need of a driver for the reader, but I'm not finding.

  Help...

  As mentioned for install the W2k you n t need additional drivers.
  I also recommend the HARD whole disk formatting and delete all partitions.

  In addition, you must use an original CD of Microsoft W2k. I read on the net that some people wanted to use the copy of the CD W2k, but this CD is not bootable.

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• My macbook does not detect the dell wireless mouse

  I have the macbook air. I tried to connect my macbook to my Dell Wireless mouse. But my macbook could not detect the mouse

  Without a model number, we cannot exclude that particular mouse is incompatible with OSX, especially if it is old.

  OS X pair with a large number of devices bluetooth automatically, but some need to be put in pairing mode.  You will find the Dell mouse model and see if that is his business.

• cannot detect the hotspot

  I just got a HP Pavilion 15-n209eia and does not detect the wifi hotspot and even if it does, it is not stable. What could be the problem and how to fix it?

  Hello, @obehi

  I see you are trying to connect the laptop to a Wi - Fi hotspot.
  
  I can't guarantee that this will work, hot spots are not stable wireless connections. If you experience intermittent connectivity with it, then you can study more enough to connect to a source of the internet which are stable.
  
  These documents can help, but they are for a typical wireless to a modem / router and the laptop.
  
  Troubleshooting wireless network and Internet (Windows 8)
  Troubleshooting your wireless network and Internet access (Windows 7)
  
  This is all the help I can provide you with this configuration.
  I hope you can make it work.
  Thanks for posting on the HP Forums.