Tecra S4 does not detect the SSD drive

Similar Questions

• Tecra M1 does not recognize the DVD drive after replacement

  I am trying to install a new drive CD-RW/DVD-RW on a Tecra M1; However, when the computer does not recognize the drive.

  Is there a solution to this?

  Thank you

  Colin

  For me it s case.
  I would say that the BIOS can't handle the new player properly because of the wrong master/slave/c-salt settings
  Readers slim for computers laptops support setting master/slave/c-salt settings and these settings can only be changed by changing the rider as on desktop drives.
  So it is very important that you purchase a compatible player and supported because disks with incorrect settings will not work.

  Before buying a car, you should ask the service provider to Toshiba for a caught player supported and compatible

• When you try to re - install Windows XP, it does not detect the hard drive.

  Hi all. I tired to do a reinstall of Windows XP today. It seems to take a lot of time, and then I did a very stupid thing. I turned off the laptop that I had to go. Now when I try to start the laptop on the cd, I get as far the screen where I have to press on enter to install Windows XP pro on the system or press R to repair. The problem is that there is now no facilities to choose from in the box below and the system is not recognizing the hard drive. I can't even as much as the screen to format the drive. When I press ENTER to install windows xp, then I get a blue screen telling me that the system shuts down to protect my pc. Is anyone able to tell me what to do to solve this problem please. Thank you very much in advance for your help. Noel

  original title: I did a stupid thing... Windows XP Pro

  Sounds like a hard drive problem then. Your drive is maybe defective. First of all, you can use the partition of diagnostic Dell (F12) for its determination.

  In case there is a SATA problem, press F2 to enter the BIOS and change the setting of hard disk SATA to legacy. (Might as well try this first.)

• My computer does not detect the hard drive or show

  Hey Microsoft,

  So, I have a Windows Vista laptop and earlier this year, my computer suddenly won't detect or display my CD player. And when I go to disk management, there is no assignment of letter or anything, just an empty space. Please help me! Thank you!

  -Maryse

  Hello

  1. you are using an external CD/DVD-Rom?
   
  2. What were the recent changes of hardware or software that are performed on the computer before the question?
   
  Please follow the links below t help solve the problem.
   
  Method 1
   
  Run only the automated fix this program from the article mentioned below.
   
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
   
  http://support.Microsoft.com/kb/314060
   
  Method 2
   
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  I hope this helps.

• Laptop does not detect the DVD drive, the .sys files deleted

  Hi I have an acer aspire laptop 4752-6861, there his factory DVD player, here are the details of the DVD player:

  --------------------------------------------------------------------------------
  SlimType DVD A DS8A5SH ATA Device
  UNKNOWN media type

  SlimType DVD to name a DS8A5SH ATA Device

  Availability during the performance/power

  Direct access to the features, removable media

  Configuration Manager User Config FALSE

  DriveIntegrity TRUE

  Media loaded FALSE

  State error

  10462 KB/S transfer rate
  --------------------------------------------------------------------------------
  NOTE: (I use speccy software for more information)
  A few days ago I had created a virtual drive but could not manage to remove it later, so I tried to delete his
  the files that were the .sys files, after deleting these files he had not yet gone, but just today, I noticed when I clicked on computer, the D:
  drive was not showing (from the DVD) IV ' e tried install and reinstallin, deactivation, activation and reboot but no luck.
  in Device Manager it gives me this error status:
  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  well I guess it has something to do with these .sys files that I deleted, I do not remember where the files were nore can
  I get back them, is possible to reinstall drivers or something, thanks in advanced for any ideas.   :)

  Hello

  This can be happen due to upper and lower case system registry settings.

  http://support.Microsoft.com/kb/894730

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/my-computer-cannot-detect-my-DVD-drive-in-Windows/3e232ab4-1a4c-425d-96DC-4f4dac074c60

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/a-required-CDDVD-drive-device-driver-is-missing/51ecd2ed-b678-E011-9b4b-68b599b31bf5

  http://support.Microsoft.com/kb/314060

• Help me. H700 RAID does not detect the HARD drive.

  Hello everyone!

  My Dell C2100 used CPU X 5650 and 700 Raid Perc.

  After connection, system says:

  "Enclosed envelope does not support in the direct mapping of the controller mode.

  Please contact your system.

  System was interrupted because of the supported configuration. »

  I replaced the H700 raid, then wire and FW update. System not notification but after press Ctrl + R, perc raid h700 not detect any hard disk.

  Please help me!

  TKS!

  TrungDV

  The issue is due to backplane having a bad rider on the expansion of the plant.  To correct this remove J15 the C2100 3.5 "bottom of basket, or backplane C2100 2.5 J7".  Refer to the below pictures to help locate the jumpers.

  3.5 "

  

  2.5 "

  

  Let me know if this helps solve the problem.

• M30X bios does not detect the hard drive, won't start HD

  Can someone help me in this problem.

  My satellite m30x hard drive won't boot, rather trying to boot from the network.

  Tried to load the installer by default, and Hd will not appear on the settings

  tried original reistal toshiba software CD and the message that no target disk appears

  Is this really a hardware problem, some conection fisical damaged, or is it a bios problem

  Thanks in advance for some light on this problem

  My M30x has the same problem. I just used 2 months.

  I sent it to the repair center as I was told to do, because it has guaranteed.

  I'm still waiting for a response from them. I don't know what caused it.

• Equium - does not detect the HARD drive more

  I just got this Toshiba 1 TB HARD drive and it has worked well so far... it's the thing like that

  Computer detects something (no dolls just the standard plug and unplug a usb) and that's it. Cable is fine, it is in the rear port USB 2.0 into a witch, he has always been, without modifications have been made to the operating system (this is a computer storage without an internet connection).

  Any suggestions?
  Thanks in advance for you're time

  Hello

  Maybe you should post more details about it:

  -Exact cell model
  -Is an external HARD drive?
  -If Yes, what is the description of the exact model?

  However, you may try another USB cable. I had a similar problem and the reason was a faulty USB cable.

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

• My mac does not detect my hard drive after the upgrade. How to solve this problem?

  My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

  Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• Tecra S3: Installation of Vista does not recognize the HARD drive

  I try to install Vista Ultimate on my Tecra S3, but installation does not recognize the HARD drive.

  I tried to find the driver for Vista for my computer, but not found RAID.
  Tried it with XP drivers, but no longer works.

  Do you have an idea where I can download Vista drivers for RAID?

  THX

  Hello

  Your suggestion is good. The Tecra S3 supports the RAID, and the RAID driver is required to install the OS on the HARD drive.
  On the European driver Toshiba page I found a RAID for XP driver.

  I put t know if this driver will run under Vista, but I recommend to test.
  The RAID XP 1.3.8.0 driver version can be downloaded from this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Please note; You can store the RAID driver on an external USB and Vista should recognize it!

  Good luck

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• the Windows xp Setup program does not detect my hard drive

  When I try to install Windows XP, it does not detect my hard drive which is visible in the bios.  My bios options are very limited, but I was able to use the bios to change the sata in ide.  It still does not work, and now he is not found with the disc of windows 7 I have.  This isn't a new pc.  He was working at a given time, but foolishly, I formatted the hard drive and have no drivers for my drive hard hitachi.  I bought a new seagate Mak, but now this disc hard is not allocated and is also not detected.  I have no way to get an operating system and I'm in a jam financially... Please help.

  SATA drives are not recognized by Windows XP installation disc.  Change the BIOS SATA ATA sometimes solves this problem and allows you to install and sometimes does not.  Microsoft's solution is to press the F6 key when you are prompted for additional drivers, and then insert a floppy disk (Yes, it takes a floppy) with the top driver.

  "Limited OEM driver support is available with F6 during installation of Windows XP and Windows Server 2003"
    <>http://support.Microsoft.com/kb/314859 >

  Several means have been formulated to work around needing a floppy disk.  You can view the following items:

  'Install Windovs XP on SATA without floppy (F6)'
    <>http://News.Softpedia.com/news/install-Windows-XP-on-SATA-without-a-floppy-F6-47807.shtml >

  "Install Windows XP on a SATA hard drive"
    <>http://en.kioskea.NET/FAQ/2544-installing-Windows-XP-on-a-SATA-hard-drive >

  HTH,
  JW

• BIOS Inspiron 2305 does not detect the drive in ahci mode

  The hard drive in my Inspiron one 2305 crushed and I tried to install a 500 GB Seagate Barracuda drive.

  The Bios does not detect the drive. I noticed that the SATA in the BIOS mode option has been put on AHCI. I changed the ATA mode and the BIOS has detected the drive.

  However when I try to install a clean version of Windows 7 (Dell OEM disc), to halfway to the installation Setup will fail. I noticed that the reason why it will fail, is that the installation process now does not see the hard drive.

  Can someone tell me what steps to take to do the installation?

  theFlash1932 and natacuk4

  Although I was not able to swap the Sata cables as natacuk4 suggested; It looks like just unplug and reinstallation of cables Sata what it did the trick!

  I was able to boot the system several times and it seems that everything works fine.

  Thank you guys for helping me solve this problem!

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.