detection of cells limited

Similar Questions

• How to detect solar cells of the image

  Hi all

  Sorry, I posted this question on the other forum but received no response. Please help me in this task. Actually, trying to detect the solar cell off image and I thought of making a histogram of the image could be a first step, but I'm not the case now. Could you please provide me with an example of similar task which can be useful. Thank you

  Concerning

  Your original thread is not dead.  I propose to close this thread and stuck with the original.

  Hell!  Meanwhile the other thread made reference to this.  It seems that you now have to maintain two threads for a question...

• Detection of cell oveflows table - new

  Hello

  I'm back to my old problem of this thread:

  Detect excess in cells and/or Force Wrap

  I encountered a situation where the old workaround solution no longer works in Adobe InDesign Server 2015 CC (same script works well in CS5.5). The overflow property is never real, even if there is overflow in the table cell.

  I tried to use a higher sleep timer to ensure that it is not yet a timing problem, but same 500ms did not help. I also tried searching for infinity in each cell after that line was over, always unsuccessfully. It doesn't seem to be a general problem, since in the same table, overflow detection works on cells in later lines and in other tables as well. This screenshot you can see the result on InDesign Server (left) and CS5.5:

  

  CS5.5 detects overflow and rotates the text, InDesign server is not in the first row, but he does in rows later. Are there other ways to detect the overflow outside the cell.overflows?

  Thank you very much

  You see a red dot in the overflow cell after you open the document with InDesign Desktop?

  Another way, maybe a little more computationally intensive, would be to get the horizontal offsets of each PointInsertion of the text in a cell. If an insertion point is in overflow, horizontal shift should return an error.

  Just an extract from test to illustrate my point:

  /*
      Test with:
      document with one story,
      one table and text in cell one that overflows
  */
  
  var myInsertionPoints = 
  
      app.documents[0].
      stories[0].
      tables[0].
      cells[0].
      texts[0].
      insertionPoints.
      everyItem().getElements();
  
  // Loop from the end of the text:
  for(var n=myInsertionPoints.length-1;n>=0;n--)
  {
      try{
          myInsertionPoints[n].horizontalOffset;
          }catch(e){
              $.writeln(n+"\t"+e.message);
              $.writeln("ERROR: Cell overflows!");
              break
          };
  }
  

  EDIT: Deleted $.writeln on line 21.

  Kind regards
  Uwe

• How do I transfer songs from my smart phone to my computer?

  ORIoriginal title: transfer music

  How do I transfer songs from my smart phone to my computer?

  Hello

  1. what operating system is installed on the computer?

  2. What is the brand and model of the smart phone?

  Most of the phones will appear as a "disk" on your computer, and you can browse the files on them by simply opening them.

  If you can do this, you should be able to copy / delete / move files between the phone and the computer.

  See the following steps:

  (a) create a folder (right click on the desktop, go again and click folder) on the desktop.

  (b) to install the latest version of the software or driver on the computer so that the smart phone.

  (c) connect the phone to the computer.

  (d) open the 'work' in the start menu. Your computer will automatically detect the cell phone. Double click the cell phone icon in the opened window.

  (e) right click on the music file or files that you want to place the phone.

  Note: To select multiple files, hold down the CTRL key while you click the files you want to transfer from the mobile phone.

  (f) select 'Copy' from the menu that appears when you right click on the highlighted files.

  (g) click in the folder window open.

  (h) right click in the middle of the window and select "Paste".

  Note: This starts automatically transfer the files on your computer.

• * Excel-send a mail when reach a certain value

  Hello

  I need help to learn how to get Excel to email me when it reaches a certain value.

  Example:<20 days="" it="" will="" send="" a="" mail="" to="">

  Is this possible? :)

  You could do this:

  1. Create a macro that scans all of the cells of interest.
  2. Assign a hotkey (for example, Alt + S) to the macro.
  3. Download the macro to call a script console when it detects any cell suddenly value 20.
  4. Create a console script to send an e-mail message.

  Whenever you press Alt + S, the macro analysis all cells and generate the e-mail message if necessary.

• Content server - migration MediaSense

  Hi all

  I am currently migrating my gateway TMS\VCS to CUCM telepresence end points.

  My Tandberg Content Server just died and I already have 2 support detection servers deployed.

  The question is: detection of support will eventually replace Content Server?

  The current feature support detection seems really limited compared to the content server, but I don't need a lot more - just to be able to save and export the video.

  Is what someone running CUCM + TMS and use record support for multi detection video conferences with channel content?

  Thank you.

  6.2 to CHT's already out earlier this year and available now.  The migration is pretty cheap, on the top of my head, something like less than $5 k per server is what we paid.

• Increase the performance of the query.

  Request:_
  
  QUERY:
  
  SELECT DET. ECL_LOG_NUMBER AS LOG_NUMBER, DET. ECL_CREATION_DATE AS CREATION_DATE, upper (det. ECL_DESCRIPTION) AS A DESCRIPTION.
  DET. ECL_REQUESTED_DATE AS REQUESTED_DATE, upper (det. ECL_REQUESTOR_NAME) AS NAME, DET. GET ENV, DET ECL_ENVIRONMENT. ECL_EXECUTED_STATUS AS EXE_STATUS,
  fun_ecl_status (pos. ECL_LOG_NUMBER) as APPROVERSSTATUS,
  decode (STA. ECL_APPROVER1, "APPROVED", STA. ECL_APPROVER1 | ' ' || TO_CHAR (STA. ECL_APPROVER1_DATE, 'DD-MM-YYYY HH24:MI:SS'),
  "REJECTED", STA. ECL_APPROVER1 | ' ' || TO_CHAR (STA. ECL_APPROVER1_DATE, 'DD-MM-YYYY HH24:MI:SS'),
  STA. ECL_APPROVER1) AS APPROVER1,
  decode (STA. ECL_APPROVER2, "APPROVED", STA. ECL_APPROVER2 | ' ' || TO_CHAR (STA. ECL_APPROVER2_DATE, 'DD-MM-YYYY HH24:MI:SS'),
  "REJECTED", STA. ECL_APPROVER2 | ' ' || TO_CHAR (STA. ECL_APPROVER2_DATE, "DD-MM-YYYY HH24:MI:SS"), STA. ECL_APPROVER2) AS APPROVER2,
  decode (STA. ECL_APPROVER3, "APPROVED", STA. ECL_APPROVER3 | ' ' || TO_CHAR (STA. ECL_APPROVER3_DATE, 'DD-MM-YYYY HH24:MI:SS'),
  "REJECTED", STA. ECL_APPROVER3 | ' '|| TO_CHAR (STA. ECL_APPROVER3_DATE, "DD-MM-YYYY HH24:MI:SS"), STA. ECL_APPROVER3) AS APPROVER3,
  decode (STA. ECL_APPROVER4, "APPROVED", STA. ECL_APPROVER4 | ' ' || TO_CHAR (STA. ECL_APPROVER4_DATE, 'DD-MM-YYYY HH24:MI:SS'),
  "REJECTED", STA. ECL_APPROVER4 | ' '|| TO_CHAR (STA. ECL_APPROVER4_DATE, "DD-MM-YYYY HH24:MI:SS"), STA. ECL_APPROVER4) AS APPROVER4,
  decode (STA. ECL_APPROVER5, "APPROVED", STA. ECL_APPROVER5 | ' ' || TO_CHAR (STA. ECL_APPROVER5_DATE, 'DD-MM-YYYY HH24:MI:SS'),
  "REJECTED", STA. ECL_APPROVER5 | ' '|| TO_CHAR (STA. ECL_APPROVER5_DATE, "DD-MM-YYYY HH24:MI:SS"), STA. ECL_APPROVER5) AS APPROVER5
  OF DET, ECL_STATUS_INFO STA ECL_DETAILS
  WHERE DET. ECL_LOG_NUMBER = STA. ECL_LOG_NUMBER
  AND DET. ECL_EXECUTED_STATUS! = 'END '.
  ORDER OF DET. ECL_LOG_NUMBER DESC;
  
  
  
  
  
  
  ---------------------------------------------------------------------------------------
  
  Execution plan
  ----------------------------------------------------------
  Hash value of plan: 2429005956
  
  ---------------------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
  ---------------------------------------------------------------------------------------
  | 0 | SELECT STATEMENT | 71. 10508. 9 (23) | 00:00:01 |
  | 1. SORT ORDER BY | 71. 10508. 9 (23) | 00:00:01 |
  |* 2 | HASH JOIN | 71. 10508. 8 (13) | 00:00:01 |
  |* 3 | TABLE ACCESS FULL | ECL_DETAILS | 71. 5254 | 4 (0) | 00:00:01 |
  | 4. TABLE ACCESS FULL | ECL_STATUS_INFO | 84. 6216 | 3 (0) | 00:00:01 |
  ---------------------------------------------------------------------------------------
  
  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------
  
  2 - access("DET".") ECL_LOG_NUMBER "=" STA ". ("' ECL_LOG_NUMBER")
  3 - filter("DET".") ECL_EXECUTED_STATUS' <>'END')
  
  
  
  the higher cost is 9%. final analysis two tables are 6 July 2012. The index also are thr in the two tables for column (ECL_LOG_NUMBER).
  The indexes are also analyzed on 6 July 2012. in the two 84rec in the table are present (DET ECL_DETAILS, ECL_STATUS_INFO STA).
  Result Final query is fetching 71 records, both Table full access in the execution plan.
  Function created from the index function (fun_ecl_status).
  After having removed order by clause... the cost is reduced. but request team need to order of folders in the order descending.
  Please suggest me what I should do to get better query performance.

  The parameter passed to the log_Nmbr function is: the ECL_LOG_NUMBER detective, who is limited in the query to be the same as the STA. ECL_LOG_NUMBER. So, when you retrieve a record of ecl_status_info in the function, it will be the same ecl_status_info record that you have selected in the query.

• Substantive issue, thanks in advance!

  For more investigation.

  I have now 3 columns.  Because I wanted to be a pest at the bottom of the page to inswert 120 x 120, I created a set of pictures cropped color blocks or studio photos... This is actually a beautifully designed thing.  The blocks perfectly in them.

  But this sort of caused a question 'low '.  I had to change the width of my columns above (hehe)

  So my gradient in the middle column background... is being confined to the edges of the cell.

  The cell is 360 pixels wide.  The gradient background is 400 pixels wide... I want to get the gradient to cross the left and right sides of other cells limiting.

  Is this possible?

  Reference site:

  http://www.prodigypianostudios.com

  Thank you very much.

  Another idea is to add the white of the image itself, not of the cultures and then apply it to the background, to deceive dreamweaver thinking there are a lot of white, which will always show the gradient of color that I need in the right place.

  Yes, if this is the desired effect.

  Unless there is an easier way to do this?

  Easier is not always better.  Gradient CSS level 3 property has limited support of the browser. To date, this method only works in WebKit & Mozilla based browsers.

  http://gradients.glrzad.com/

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Cannot detect the limits of reverse front/market

  I have problems with the switches front and rear for my stepper motor system. When I created a NI Softmotion axis in Labview, no matter how to set limit switches, either appear as assets or both inactive, regardless of the position of the platform. I use for my end of race, photointerrupters. When I don't have the equipment under voltage, the photointerrupters works as expected and give a signal of 0 V when the platform is not the limit and V 5 beeps when the platform is at the limit. But when I try to use the Labview interactive panel (or in a VI elsewhere too) the limits are not detected and behave differently as well. I got a voltmeter connected to see how the tension behaved and pressure readings are odd. In a case when I tested the 'active' signal of each switch, was one of the limit switches to 6.7 V and the other was at 3.7 V, even if they had the same exact wiring and configuration. I'm completely stumped on how to connect these in the system so that they work or how to configure Labview to properly recognize these limits (meaning sourcing vs shipwreck and active State power). I searched the forums and manuals, but I can't seem to find a solution. Here are more details on the system:

  The engine is now a platform back and stepper motor is powered by a Kollmorgen P70530 stepper drive. To communicate between the command of stepper motors and the computer, I use a cRIO 9076 with a NI 9512 in the chassis. To connect the end of race in the system, I used the NI 9512 connection block 37 pins. Switch in the photo that I use is a strong GP1A05 CIPO Photointerrupter with connector. For this photointerrupter, there 3 pinout: a Vcc input (voltage source), a GND input and output Vout. The SCR is supposed to be connected to a source of 5V and GND to the mass (obviously) with resistance to pull-up between Vcc and Vout (I use a k 10 Ohm resistor as who has what has worked for me in the past with this specific photointerrupter). Vout is supposed to give a signal 5V, then the limit would be active and 0V when it is not active. How I had connected the photointerrupter to the connection block 37 pin was as follows: to the limit before, I had the VCC to pin 9 (+ 5V OUT), GND was on pin 3 (COM) and Vout was on pin 1 (before the deadline). For the inverse limit, I had the VCC to pin 9 (+ 5V OUT) GND was pine 24 (COM) and Vout was on pin 20 (inverse limit). I also tried to connect terminals GND the switch of the photo to the GND (shield) pin on the plate at terminals without success either. In regards to Labview, I am running Labview 2011 SP1 on my computer.

  If you have any ideas, I would greatly appreciate it if you would share that I am really confused with something that seems on the surface to be quite banal.

  Thank you

  Steve

  Steve:

  I am puzzled too-

  Manaual I looked:

  http://www.NI.com/PDF/manuals/372153d.PDF

  Your PIN seems correct.

  I assume you have a power supply connect to Vsup and COM.

  Research on page 3-10 for sourcing of the shows without pullup resistance, have you tried remove the 10Kohm?

  But watching page A-3 for levels of limits, it shows<5V for="" low="" and="" 11-30v="" for="">

  I'm confused-pg 3-10 looks like the 9512 provides its own pullup still pg A-3 show the necessary voltages for entries.

  I hope someone can clarify this.

  -AK2DM

• How can I add my device a cell phone done model sanyo SCP2700 to my computer it only said no driver detected modem

  Original title: device

  How can I add my device a cell phone brand sanyo model SCP2700 to my computer it tells me no driver modem not detected and I tried to activate the bluetooth of my cell device same phone it says the same thing

  Thank you very much

  Hello americoirizarry,

  The best thing that can be done here is to contact Sony.

  In the end, they design the drivers and software that allow the phone to work with Windows.  As such, Sony makes the decision about how and if this is possible.

• Cell ID-based location detection

  Does anyone know of a company providing cell based ID location detection BlackBerry?  I am looking for a service similar to SkyHook (unfortunately, SkyHook itself is not available on BlackBerry).

  There are several applications using this technique (e.g. Poynt) so I know that there must be a library/service that does this.

  Earl

  Google has an undocumented web service which can provide the lat/lon RAD_ERROR_NOCONTENT and Lake.

  http://www.anddev.org/poor_mans_gps_-_celltowerid_-_location_area_code_-lookup-T257.html

• When I opened my cell phone message shows that Windows detected a hard disk problem I use toshiba laptop windows 7

  When I opened my cell phone message shows that Windows detected a hard disk problem I use Toshiba laptop windows 7

  Hi Vimalpal,

  To provide the proper resolution, I would need more information on your side.

  1. What is the number of the model of the laptop?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest you run the disk check and check if it helps.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Detect excess in cells and/or Force Wrap

  Hello

  I do not know if I use the wording correct, but here's the problem:

  We have table cells containing text in excess, but cell.overflows does not work here, if my guess is that the overflow behaves differently in excess.

  Basically what I'm trying to do is, to display the contents of the cell, no matter if it is too broad (it's some long cryptic codes, which do not seem to wrap at all), then perhaps the detection in excess is not necessary if there is an easier way to always show the content. The modular cell height, but not in width, this works very well for a regular text, which is wrapped automatically. But these codes not get wrapped.

  Any ideas on how to force text to display?

  Thank you very much

  Hmm, that's strange. If I use your script in the finished document, I get "true" for each cell that is full, but when the script runs, only on a few cells returns true. For example, I have a line where 8 cells extend, but only one of them returns true, while executing the script.

  This would be fine for me, but he needs the overflow check to work:

  If a cell returns true, I rotate the text 90 ° and adjust the row height until he goes. But unfortunately, most of the cells of overflow return true. The cell styles and paragraph have already been applied until I check for overflow. Is there another element inside the cell, that I could check for overflow which works more accurately? Or is it a timing problem? Perhaps a timer would work here?

  Thanks again

  Edit:

  Yes, it was a timing problem. I just put a 200ms sleep timer and it works very well. Now, it's just slow. If you have an idea how to solve this problem without the Sleep function, it would be great, otherwise I'll mark this as resolved and we need to be a little patient while the script is running.

• Very large content limits (W:892 H:389510) detected in BoxUtils::childBounds

  Today I was working on a project Muse when a widget went out of control and now the entire file is corrupted. I just changed a "new Star" widget in time. Now I am unable to work on my project, no matter what I click triggers this error popup, follow-up of an accident:

  "Adobe Muse CC has encountered an error and will now close. Please report the last actions bit that you have taken leading to the ths error in the Adobe Muse CC team.

  Very large content limits (W:892 H:389510) detected in BoxUtils::childBounds.

  How can I solve this problem? I spent a good week of work on this site =)

  Hello

  Could you please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.

• How to activate a SIM free iphone 6s plus will detect a sim? I don't want a cell phone or voice

  Apple iPhone 6 s more SIM more memory each option free latest OS and Applecare happened today. I have absolutely no need to voice or cell phone. A; I want to, it's an iPad the smallest size. When I try to turn it on I get a required message of SIM.  I used an iPhone 4 without a sim card, but it was destroyed... I use Tracfone voice and used 48 minutes over the past twelve years and do not want to waste money on the cell. How can I use it without a sim card?

  You need a sim card in the phone to activate or restore it... no way around that fact. So, beg, borrow, or buy a sim card if you want to activate the phone. You can remove the sim card when the phone is turned on.