Detection wireless with my Qosmio

Similar Questions

• Laptop wireless with NETGEAR router Home Windows Vista detects on the local network and internet

  We have a laptop Toshiba Satellite L505-S6946 with Windows Vista on it. We bought a router Netgear Wireless G WGR614V10 a few months ago and installed ok. It worked fine for a few months. Now the network connection to the bottom rhs shows tray icon: 'Local only' for the connection of the SSID, we have implemented. Technical support Netgear has determined that the router works fine. But they noted that the router might get a static IP address in his settings of the adapter wireless Vista. And they said that something should be changed in Vista to a direct connection with the modem works fine for internet access, but it's bulky. Someone please do you suggest to fix this error? Thank you!!!

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Satellite T135D - cannot detect wireless networks

  I bought a T135D early January.
  Everything was happy until one day my laptop decides it cannot detect wireless networks, and even less to connect to one.
  I don't think the T135 came with a manual switch, while in the BIOS it says it's on.

  The graph with the antenna and 4 bars charge is no longer at startup, or the light that lights up on the front of my laptop. It's frustrating to have this kind of problem so early in the game with the T135D.

  Any help would be appreciated.

  Hello

  The wireless network must be activated by pressing the FN + F8 key combination.
  Have you tried that?

  If not, please check it

  Of course, you must make sure that the WLan card driver is always up to date.
  Here you can find the most recent:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• HP all-in-one wireless with 10 5525 windows insider

  Hello world

  I work with the 5525 printer about 3 years.

  also with wifi wireless, andalso with windows 10.

  all of this until last May.

  in may, I was to format and install windows 10 insider and fromthis point, thast all I tried to solve the problem, it's not helping me. and the problem is:

  that, since may, I can't work with this printer, wireless, with wifi.

  I can to work very well with a usb cable, but not with the wireless.

  Windows don't simply do not see and not detected my impression when I try to work wireless.

  is not see the printer. not even in offline mode.

  in the list of wifi, I can see the HP-printing-da-Office-5525, but in the unit and the printer - no.

  I also tried to install all the latest drivers from hp and for windows 10 - without resluts.

  also, I tried to install the latest windows build - 14390, but this does not help me.

  I think its something with the drivers.

  can someone help me?

  Thank you very much!

  Well, first thing to do is to disable wireless live, because you don't need and it's confusing questions. To disable this feature:

  1. On the printer, click on the wireless icon that looks like a radio tower.
  2. Click settings.
  3. Click on wireless Direct.
  4. Click turn OFF.

  Now, to connect the printer to your wireless network:

  1. From the main screen, click on the wireless icon.
  2. Click settings.
  3. Click Wireless Setup Wizard.

  Please let me know the results after following the above. If you are able to connect to the wireless printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• 'Detected wireless networks' followed by 'no wireless networks were found in range ".

  Trying to help a friend with their laptop!  It's a Lenovo R61i laptop model A 8932, 54, around the age of 16 months.  WIN/XP SP3 is the only OS.  He was working on this wireless network until they are gone on vacation and tried to connect to public wireless networks! Their daughter portable computer continues to operate properly with this wireless network, and it also shows the neighborhood wireless networks as well.  The R61i has a built-in 'Pro\wireless Intel 3945ABG Network ' wireless wireless adapter.

  Connectivity and internet access works very well through the ethernet port.

  Here's what I've done so far:

  He has Norton AV.  I made sure that it was up to date and then ran a full system scan.  It was clean.

  Any help will be appreciated, and I WILL ANSWER about the results!

  Windows Update ran (after I got it work - see below) for all critical updates.

  Fact a "repair" on the wireless connection with these results:

  • Wireless networks detected
  • No wireless networks were found in range
  • Windows could not finish repairing the problem because it is impossible to perform the following action: connect to the wireless network

  That when the laptop is 5 feet of the wireless router.  It is a Dlink
  Updated the driver from Lenovo web site by the support of the Intel boards:

  • former pilot was 11.1.1.11
  • new driver is 12.4.0.21 with a date of 04/03/2009

  Went into the BIOS and reset the BIOS to its original, saved and reloaded settings.

  Checked the Device Manager.  Everything looks OK, no yellow or red devices

  Remove the network card and let Windows re - create.

  Disabled and enabled the network card

  Check the event logs.  The only entrance is on the system log.  I don't know if this event log entry is significant or not, but it's here:

  Source: NETw5x32, zero category, event 7036.
  The service entered the \DEVICE\{78E5EBB6-A194-4E9F-A840-E05CC39A5823} State.

  0000: 00 00 08 00 02 00 62 00
  0008: 00 00 00 00 7 c 00 40 1 b
  0010: 00 00 00 00 00 00 00 00
  0018: 00 00 00 00 00 00 00 00
  0020: 00 00 00 00 00 00 00 00
  0028: 57 44 52 56 00 00 00 e7

  I have not yet tried it raise in "Safe Mode with networking".

  I would add that "Windows Update" was also not working. Graduation: A few updates have not been installed.  Error code 0 x 41. I had going in downloading and installing the latest version of Windows Installer 3.1, version 3.1.4001.5512

  Do not think that there is a relationship between these two issues, but stranger things have happened.

  The laptop has a 3-year extended warranty and I'm about to throw it in the face of Lenovo as a hardware error.  The thing that blows my mind is 'Detected wireless networks' followed by 'no wireless networks were found in range ".

  Hi Shawn

  Thank you for your help.  Here is the final solution to this problem.

  The "clean boot" you suggested worked as described, but it had no effect of awareness of wireless networks.  Ditto to start in "Safe Mode with network.  We took the laptop to Office Depot; They basically ran the same tests that I did, with the same results.  Their technology has managed to get it to connect to Wireless store by manually setting, but it would not show under 'view available networks '.  He suggested that we call their 800 support number.  The only novelty with that phone support guy came was to "Ping 127.0.0.1" which I don't think inherent in the wireless somehow.  He wanted me to call Comcast to check the internet connection.  Under the principle of "do not create a new problem while you're working on a problem", I resisted to go here as two other computers work fine on this connection from Comcast.

  We finally opted for a full charge of Windows.  This included a blue key on the laptop at boot to bring up "Rescue and recovery", then by specifying 'Restore my hard drive to the original factory condition' and "don't save all files" - we have previously saved the contents of "My Documents" on a USB key.  This charge really don't take as much time as I thought he might; only about an hour.  Most importantly - WIRELESS NETWORKS APPEAR NOW; and connect as it should!  We had to apply SP3 as reloading he brought back to SP2 status.

  I guess the lesson here is that sometimes he just reload Windows is the shortest possible solution to some of these mysterious problems.

  I had a hard time to convince me it was a hardware problem, when the system detects wireless networks but are simply not them!

  Thanks again for your help.

  Bruce Butler (np560)

• Cannot access wireless with linksys WRT54GS router

  Hello

  I just installed a Linksys WRT54GS router on my connection, the problem I have is to be able to access with my wireless on my laptop.

  I kept getting a message saying 'connection unindentified' 'access '. I did most of what is already on your forum that such a power out of my rooter, my modem and such and still nothing. I am able to access wireless with my girlfriend Mac laptop, my playstation 3 and my desktop computer which uses Windows X. I initially thought that it my be a problem with my security but even when the connection is unprotected I still have this error. I am trying to disable the IpV6but that didn't ' dot something or the other.

  My laptop is a Toshiba Qosmio X 300 PQX32C-033019 with Vista and my router is a Linksys WRT54GS to. 6

  Here is my connection connect you, sorry if this is in French:

  Try this-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  On your Vista laptop, first turn off the wireless network connection and restart the laptop, and then enable the wireless connection...

  Then click Start > Control Panel > Network and Sharing Center > manage wireless network and click Add, select manually create a network profile and click Next, enter the name of your network SSID/network, select WEP for security type and enter your 10-digit network key and click Next, it should say 'Connected successfully to _' close all windows , and then restart the laptop, now see if you can connect to the Internet wireless...

• My laptop cannot detect wireless networks after using the Windows Update service. Technical support, very desperate need.

  I tried the direct technical support, but it seemed to have cut. Given that I can no longer connect to the internet on my laptop, I'm with my playstation browser and painfully by typing with the controller.

  My probllem.
  I have an ASUS Intel Core i3 - 2350M CPU @ 2.30 GHZ running Windows 7 home premium. I've selected "Windows Update" in the start menu and proceeded to download and install all updates. Once the updates have been installed, my laptop couldn't detect wireless networks which means that I can't connect to my router and have lost the internet.
  Device Manager indicates 802.11n Wireless LAN Card is working properly.
  Windows did create a restore point before installing the updates, but everytime I try a restore I get the following message
  "System Restore has failed. Your computer's system files and settings were not changed
  Details
  System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus program and restart System Restore.
  An unspecified error occurred during the restoration of the system (0x80070005)"
  "I disabled anti Virus AVG and COMODO firewall only to receive the same message, and it now appears that the restore point disappeared as if by magic, saying system restore ' no. restore points were created.
  Updating installed Windows the following
  Microsoft .NET Framework 4.5 1 4.5.50938
  Microsoft Office Home and Business 2010...
  Service Pack 2 for Microsoft Office 2010...
  Microsoft driver (keyboard) 21/04/2009
  Microsoft driver (mouse) 21/04/2009
  Driver Microsoft (System) of 21/06/2009...
  Microsoft driver (System) 21/06/2006
  Driver Microsoft (System) of 21/06/2006...
  RALink Technology, Corp. (Net) 02/04/2013 pilot
  Update for Microsoft Windows
  Update for
  Update for
  Well when the restore point was present he says that these things will be deleted that's where I got the list, but as I said the restoration failed and disappeared.
  I have reset my router but my laptop doesn't detect a network and there are usually 10 in the region and it shows nothing. My router is fine, as I use it now with my playstation.
  Please I really need help, how do I get my laptop to detect the wireless network. If someone could give me a few steps to do, please.

  Most laptops have a switch that turns the wifi radio on or off.  Often, it is a combination of the Fn key and one of the F keys.  It may be a physical switch somewhere on the laptop.  See your manual for details.

  If this isn't the problem...

  What is the brand and model of your router?  Almost all wifi routers also have at least one Ethernet port, you can connect your computer to the router with an Ethernet cable and download the right driver for your http://www.asus.com/support wireless card
  Have you tried to "Roll back driver" in the "Driver" tab of your adapter wifi 'properties' in Device Manager?  At the very least, determine which version of the driver is installed, and compare that to the current version on the asus support site.

• My office wireless icon is x'd - cannot detect wireless networks.

  My computer screen suddenly went black this evening - the monitor was still, the fans were still humming, but it was totally insensitive.

  I forced a stop, and when I rebooted the computer, my wireless icon has been x'd out. My computer cannot detect wireless networks (there are a half-dozen or more in my building). I tried a good stop and restart, but the problem was still there.

  The Network Diagnostics tool told me to check the router, so I did--but all other devices in the House are connected very well. I thought it would be a malware, so I ran a MalwareBytes scan, which turned up nothing. Then I reinstalled the drivers from the card WLAN - no luck there.

  System Restore has not solved the problem. ipconfig says "media state: disconnected ' for my WIFI adapter, but I don't know how to fix this. In the devices, the Broadcom WLAN card Manager, he says "this device is functioning correctly.

  I work from home, so it is important that I can access my wireless. Help, please!

  Hello

  I imagine the inconvenience that you are experiencing.

  1. What is the brand and model of the computer network adapter?

  2. This error message with him modeling icon?

  3. do you have a code error message when you try to connect to the internet?

  Here are some steps you can follow to resolve the problem:

  Step 1:

  Check if the network adapter is enabled, if not, please go ahead and enable the network adapter. Please follow the steps:

  a. open network connections by clicking the Start button, then Control Panel. In the search box, type adapterand then, under center network and sharing, click view network connections.

  b. right click on the network card and do one of the following:

  -To disable the network adapter, click disable. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  -To enable the network adapter, click Activate. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:

  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-a-network-adapter

  Step 2:

  Try to reset the TCP/IP settings:

  Reference:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357/en-us

  Step 3:

  Flush the DNS and request a new IP address of your ISP server by following these steps.a. Click Start
  b. click on run
  (c) in the Run dialog box type cmd.exe and click OK
  d. in the command prompt, type the following.e. ENTER after each new line.
  ipconfig/flushdns
  ipconfig/release
  ipconfig / renew
  output

  See also:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Cannot detect wireless around my laptop

  My windows 7 cannot detect wireless connection, not to mention I had turn it on wireless. And when I want to use the AD HOC as the host network to connect another pc to share files, it didn't work. Windows could not set up the Ad Hoc. What should I do to fix this?

  Thank you
  Leila pamungkas

  Hi Leila,

  What is the brand and model of the computer?

  This problem occurs because the Windows operating system does not automatically recover when a WPA2 ad hoc network connection times out. A time-out may occur if one of the following conditions is true:

  • Windows Vista or Windows 7 detects no activity.
  • There is a charge of busy network traffic.
  • Network device drivers are outdated.

  Method 1:

  Run the network troubleshooter, and update the driver wireless on the manufacturer's Web site.

  Reference:

  Wireless and wired network problems

  Method 2: You can perform the steps described in the article and check out them.

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481/en-us

  See also:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Hope this information helps. Response with status so that we can help you.

• HP dv6-7010us wifi is not detecting wireless signals.

  A month ago I bought the computer hp dv6-7010us laptop. I stated it upward and checked the wifi options. He was able to see very well wireless signals. Then I installed a new operating system - windows 7 ultimate 64-bit. I installed all the drivers for it and everything was fine except for the wifi. The drivers are installed, but now it doesn't detect wireless signals. It keeps telling me "no connection is available. I went to multiple wifi access points where I KNOW there is a signal, but it does not detect.

  The current driver, I have for the wlan is AR9485 of Qualcomm Atheros 802.11b/g/n. A representative from hp support told me that I would have to order recovery dvd (yes I've eliminated the recovery disk) and restore the factory operating system so that my wifi works properly. It doesn't look good for me. This seems to be a driver problem. So I uninstalled the driver, returned the site official HP to try another wifi driver and installed the same driver that I had before... with the same result... no connection available.

  I'm stumped and could use some help.

  Thank you.

  OK so I ordered the HP restore disc last Friday... and he got here Saturday - HP GO!

  Anyway, I reinstalled the factory system, and of course wifi collecting wifi signals. I watched the pilot and it was the same one I had installed on my windows 7 ultimate - (but it wasn't). So I used a free software called 'dual driver' to backup all drivers factory... reinstalled my windows 7... double driver to restore drivers from the factory os and BLAMMO! My wifi now works with my windows 7 ultimate.

  So, my advice to everyone is backup all drivers factory until you wipe your system. Restore them after you install your own operating system.

• Qosmio G20 screen is comatible with display Qosmio G10?

  Hello

  Dose anyone know if the screen Toshiba Qosmio G10 is compatible with the Toshiba Qosmio G20?

  Thank you guys

  Of
  Sweet

  Hello

  I think display of the G20 should be compatible with the Qosmio G10 display.
  I searched a bit and found that the Qosmio G10-100 PQG10E was fitted with the 17 "WIDE XGA LCD.
  The Qosmio G20-101 PQG20E supports the same 17 "WIDE XGA display.

  Therefore, it seems that both units use the same screen.

• iPhone 6s doesn't sync wirelessly with iTunes

  I have a new iPhone running OS 9.2.1 6s.

  Is set upward wireless at the Apple store, restored from my previous iPhone 5 and me kept updated iOS and phone saved wireless, and had not annexed it with iTunes on my Mac, until today.

  I have the gasket with the USB cable into my iMac running the last El Capitan, iTunes 12.3.2

  The iPhone has shown in the section "My devices" in iTunes, but I immediately got a message "there is a new version of iOS for the iPhone (9.2.1). iTunes started download iOS 9.2.1 but I stopped, because the phone has already 9.2.1.

  I checked the preferences to allow the iPhone to sync wirelessly with iTunes, applied and then ejected from the iPhone.

  My iPhone is connected to wifi, but when I restarted iTunes it does not connect wireless - the wireless only showing in iTunes is my iPad.

  My questions are so

  (1) why only iTunes can only see my iPhone 6 is already running the latest version of the iOS software

  and

  (2) why didn't it connects wireless when I set the preference to do?

  Thought I'd ask advice here before that I contacted Apple support.

  Thank you

  Caroline

  There is a different verson of 9.2.1 released by Apple to fix the error 'January 1, 1970.  It is only available through iTunes, not live.

• Can not put on wireless with FN + F8 on my Satellite L750D - 19 c

  Hello

  I can't put on wireless with FN + F8 on my Satellite L750D - 19 c with windows 7. It stopped work at shot, and I cant get it up and running again. I tried to install the latest drivers and the disabled option 'save energy '.

  / Magnus

  Hello

  I have the same problem with my satellite L670.

  The FN keys do not work and I am not able to use my Internet connection. : () o

  I used to get these buttons to apear on the top of my screen to get the mouse towards the edge.

  So I could turn the wireless on / off power with the mouse.

  But these "maps" doesn't apear. Or my settings on the camera to the left of the screen.

  Thank you very much.

  Post edited by: PearlSabian

• Some strange problems with laptop Qosmio

  I don't know it is a problem of Qosmio, but I'm fairly well known when it comes to computers and I've never heard of it before. Unfortunately, it is not my computer. They're my friends, so I'm on the phone with him.

  She has a Qosmio and she says she found the top keyboard to be insensitive, and while she can move the keyboard and the cursor moves, she cannot click the buttons with her. Also, when she opens a browser etc it goes full screen, and she loses the toolbars out of most of the programs.

  Also, when she opens the word it is says she control pressed and it request if she wants to start in safe mode. If it maintains the power button down to turn it out (only means she can) it doesn't fix it.

  She said that she had been once before, and was able to solve what she said, but do not remember how, but she kept the keys (!)

  Someone at - it ideas? Thank you very much!

  Hello

  This question is unclear to me because it sounds a little confusing description.
  But I don t think it has something to do with the Qosmio material. It sounds more like a software problem.

  So first it would be very interesting to know how much time the OS works on the laptop and what was the last installation of the OS?
  Maybe a corrupt registry and trash key OS is responsible for this matter. This is possible because you said something about safe mode

  Check if the new facility could help

• Had to replace the hard drive, windows xp restore, now unable to detect wireless networks.

  Had to have my hard drive on my Dell replaced, restored Windows XP netbook, now I am unable to detect wireless networks. Someone at - it the answer? Thank you.

  Hi DeAnnaW,
   
  Follow the steps in this link to fix the problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  Note: The steps in the link are applied to the other service pack versions of Windows XP as well.