Dev4 - bad power cord

Similar Questions

• DV 6910us the bad power cord connector

  My laptop HP Dv6910us has developed a problem with the connection of the power cord into the computer.  Central Post Office of the computer seems to be sure.  Problem is that when the power is connected, you must screw the connector, crossed their fingers and maybe blue light to indicate the power of the computer turns on.  We tried another power supply not HP and it worked for a few months, and then the same problem occurred.

  Is it possible to replace or repair the HP power connector that goes into the laptop?

  Hello

  External review of the power jack on the laptop wouldn't tell you thing.

  A multimeter connector on the external adapter test will be.

  So if there is output voltage of son but not the connector of the AC adapter it should be able to go to an electronics parts place, and get a replacement.

  If this are the results of his test, why not just ask him if he can take the power adapter to the store, find a matching connector and replace. ?

  Best regards

  ERICO

• LaserJet m225dn mfp pro: printer freezes up, power cord wrong or bad grounding?

  Hello.  We have an ongoing problem with this gel printer (backlight on).  I can say that it's okay if it passes in the standby mode.  If after the default, sleep, standby fails, it is always locked and requires a reboot.

  It comes with the power supply cord is too short, and relocation is very difficult.  I have been using two (seem to be very good) of the longer computer power cords.  One is 10' and the other is 12'.

  I tested the ground taken with a multimeter and it revient.2 v, which is not 0, but I think is pretty close.  There are other things on the same circuit.

  Problem is I can not test the normal short cord and easily keep the printer connected to the USB cord and a fax machine.  Would be a 10 or 12' power cord (no UPS online) will be enough to lock up this printer?   Thank you.

  I found the solution myself.  For a longer length, 14-gauge is necessary.  I have this and it seems to fix the problem.  He could have a blockage, but I'm not sure.  Been working normally for more than a week with this 15' cord

  Cable SF, universal 15 foot cord 14 AWG - IEC320 C13 to NEMA 5 - 15 p SJT 15 has

• Satellite L40 - 14N boot question without power cord

  Had this problem for a while, any ideas please?

  My Satellite L40 - 14N sometimes won't start when the power cord is not connected. It starts ok but when I get to the Windows screen drops colored that keep moving from left to right and the machine will not get one more no matter how much time is left.

  This never seems to happen when the power cord is connected and is turned on, it starts very well.

  Hi starmonkey,

  What power lead do you mean exactly? Do you mean the AC/DC adapter?

  To be honest, I also don t know why this happens, but you use pre-installed OS from Toshiba?
  You have installed a different display driver?

  Maybe you should try to reinstall Windows in worst case it s a bad material work :(

• Portege M200 - connection loose in the power cord

  Hello

  After almost 5 years of intensive use (this is the 3rd battery which is currently begging for replacement...) my M200 still works fine - great device!

  However, the power cord has a bad connection for a few weeks now. The problem is located next to the DC plug. So, whenever I connect the M200 to food, I need to turn and bend the cable in order to reactivate the charge current. Friend of mine, a 2004 purchased another M200, exactly the same problem.

  Problem: The power cord is fixed on the transformer, and a new Toshiba 15V power is quite expensive (if you manage to find one, anyway...). Is there a solution to fix the cable (or get a replacement cable / repair kit) rather than buy a new power supply?

  Thank you!

  Florian

  Hi mate,

  AFAIK there is no repair kit for this problem. You must buy a new Toshiba AC/DC adapter because a cable can t be repaired.

  I know it's so cheap, but maybe you can get another compatible adapter AC/DC to an authorized service provider. Many AC adapters are compatible to different notebooks, so maybe a cheaper is available.

  Here you can search for an ASP to give them a call:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• is it safe to run my compaq presario cq62 without the battery and the power cord attached?

  My laptop told me that my battery should replace... I have to keep my power cord in now all the time coz my battery poer only changed as 5 minutes... is it safe out of my battery and run the laptop the power cord?

  Hello:

  Yes, you can do it.

  Is it a matter of having a lighter weight?

  You can also run the power cord with the battery installed.

  Sometimes the battery is so bad that you have to remove and the laptop will not work with the battery removed and plugged power cord.

• Pavilion DV2000 power cord failure

  I went through several power cords for my laptop Pavilion DV2000Z. A couple of them felt like they have overheated. The biggest problem has been that they fail to power the laptop. I do all connections, no power. I find that I need to move the connections and/or by shaking the whole string in order to get the cord in just the right position it will provide power.

  A little while ago, I heard a cracking sound, like electric sparks. I looked down to the power supply cord and smelled burning plastic. I have one plugged in the power cord, waited a few moments and it reconnected. I found when I waved the portion of the rope connecting the output to the control area of power that I continued to hear the Crackle.

  The technician gave me a link to find a center of HP in my service, and with a search of 900 miles, there is nothing here. I told them this, and now they have me call the helpline... wish me good luck with that. * Rolleyes *.

  I had a few other problems with this computer that have been resolved quickly and effectively, but this problem of power cord is endless, and it seems that all my replacements have been rehabilitated. It is the first HP laptop, I bought and the last... my next will be a Lenovo/ThinkPad.

  Anyway, if anyone has experienced this problem, and if so, were you able to get a power adapter that seems as if it will actually last as long as the computer is? Any suggestions? Thank you!

  Let me know!

  I ordered their client of this site. Click here.  Not bad for $4.

• Power cord for my iMac has crunched, how do I get a new one?

  What I do my power cord for my iMac has been chewed and I don't know if I can claim the title of the guarantee or if I should just buy a new...

  As I can use it only if I put in some way and cannot be pulled.

  If the plug of your end iMac has this form:

  

  Then the power cord to any standard computer work.  It may not be

  White enough with the beautiful fitting molded but it will work.

• Indicator light power cord

  That means the light orange on the power cord?

  Support actively at a high rate.

• After resetting the iPad to default it show that the power cord is trying to connect to iTunes

  I got an iPad 16 GB factory reset default after a while display only the power cord going to iTunes, need help to get this operational back, it worked Ok before resetting all we have tried to make clear the former owner information

  The iTunes icon and cable image means he went into recovery mode, you will need to connect it to iTunes to your computer to reset the iPad, and you can then restore/resync your content.

  If the previous owner had not disconnected from the settings > iCloud on it and find my iPad has been activated, you will need to communicate with him or her: disable find them my iPhone Activation Lock - Apple Support

• A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

  A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

  Yes.

  http://www.Apple.com/Mac-mini/specs/

  the voltage may vary from 100-240 V AC.

• Power cord from the airport

  Is the power cord for the airport bought in Hong Kong not usable in the Canada?  My airport does not at all.

  The airport itself base can work with a variety of outlet power settings, but the types of decision-making between Hong Kong and the Canada are completely different. Base station supports a range of 120-240 v, 50-60 Hz energy sources. The other thing to consider is that the radio channels used may differ between these two countries.

  Sockets (120 v, 60 Hz) used in the Canada is similar to that used in the United States and look like one of the following conditions:

  

  While in Hong Kong (220v, 50 Hz), they use the following type:

  

• My iPad displays a symbol of power cord and iTunes

  I tried all things hold sleep button to connect to the computer, then hold power button waiting and then start your computer repair but the iPad won't do anything except show the same screen, then after a few hours, the iPad is going to a dead battery. I tried to put the power cord but just ping guard. HELP Please,

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Power cord

  iMacs come with a single power cord.

  Is it safe to just plug the straight iMac in the mains or via a power Board?

  You can connect either. Both are safe as long as the power strip is approved by UL.

  See you soon,.

  GB

• Pavilion DV7-6175us: wire frayed at the power cord

  

  I just discovered this thread in my power cord cut tonight. Spare part number is 609940-001. As you can see, the white wire is broken, but the only issues I have experienced with my laptop is my AMD display driver to crash. But after you have reinstalled it and Direct X, as well as some versions of Microsoft Visual C++, the stability of video cards has improved considerably. But tonight, he crashed twice in 5 minutes, and then a few seconds later, just let Windows down and showed me a message of BSE on my display driver. I then looked at my power cord, and I find the severed cord. The severity of a problem is the next, and how long should I try and get a replacement cord? Thanks for reading and thanks in advance for your answers.

  Stop using it. It is a fire hazard and a danger to your laptop. Get a new one immediately.