Develop library of LR vs overview - Develop is bad

Similar Questions

• I bought a whole new office 27 "Mac provided with Adobe CS6. Everything worked like a charm until the 1 TB hard drive, developed a bad sector and the Apple Store reinstalled a new I had extended warranty with them. The recycled player I

  I bought a whole new office 27 "Mac provided with Adobe CS6. Everything worked like a charm until the 1 TB hard drive, developed a bad sector and the Apple Store reinstalled a new I had extended warranty with them. They are recycled the disc immediately (like crazy, I don't ask for this return to get the data off it.) But fortunately, I have all my data on CrashPlan. I downloaded it and it was working fine except that I downloaded it on the desk and not the original location so he had succeed. I also have an external 1.5 TB drive that I wanted to make it bootable, so I installed Mavericks 10.9.3. Then I advanced and installed on disk newly installed too.

  I think that because I have a new reader that adobe thinks, I have a new computer. I bought the 27 "Mac new on Ebay and it came loaded with the software, including CS6. I have a serial number for CS6, but Adobe says that it was not valid. (I've owned CS2 and CS4 now CS6 that came preloaded on the Mac by the seller who told me that the software has been registered for the Mac?

  I'll re - download the backup to the original location but this time (I still don't think that it will work with Adobe.) What can I do about it?

  iMac 27 inches, end of 2012

  Processor 3.2 GHz Intel Core i5

  Memory 32 GB 1600 MHz DDR3

  Graphics  NVIDIA GeForce GTX 1024 MB 675MX

  Software  OS X 10.9.3 (13D 65) @.

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• What's the development Guide bad about recording the videos programmatically?

  Hi all

  According to BlackBerry Java Application - Multimedia - Guide to development to these URLS:

  http://NA.BlackBerry.com/eng/deliverables/8542/Record_video_without_using_the_camera_app_734824_11.j...

  http://NA.BlackBerry.com/eng/deliverables/8542/Recording_media_in_a_BB_app_734823_11.jsp

  It has support for recording video API. But on this forum, there are several clarifications where it says that the video recording API is not supported.

  I'm confused as to what is true? If the API of the video recording is not supported, I ask that people BlackBerry put a warning on the page in the URL above and provide an alternative solution that works.

  I plan an application that must call the video camera and capture the video and I tested on Blackberry Bold (9000) Rogers v4.6.0.162.

  If the examples of development mentioned above bad?

  No device is out there on the market that works 5.0 OS... However, RIM it will publish soon - Yes, I assume that devices that are greater than or equal to 4.5 will stretch... But of course about 4.6 or higher (includes your "BOLD" )...

  See you soon...

• Overview of very bad police on iPad retina (SE CC)

  Sorry everyone, I have a small problem: I created a page in 1024 x 768 with a font to 18pt and preview on iPad retina is very bad (great on iPad 1/2).

  I need to work on an application SE for all the iPad - what do I do? PDF article? Or what?

  NB: can I built one single App HD 2048 x 1536 edition?

  Also SE Creative Cloud Edition?

  I ask this question because I know that SE Creative Cloud Edition are minor features SE standard (ex: Analytics).

  Thank you!

  If get you an overview through the decorative Panel, it will create a folio hatched. Maybe that's the problem.

  I would suggest the creation of a folio, make sure that it is the 'PDF' format, and then add the article, then use "Folio Preview" from the Folio Builder Panel.

• Third party compiled .dll throws COFF header link error bad member library

  Hello

  Has anyone worked successfully through the binding process and building third-party library files into an executable LabWindows?

  Specifically, I am trying to build an executable in CVI which depends on .dll and .lib files generated using the minGW compiler. (CCG)  This always results in a failed attempt to link with:

  «Aborted load library ' library path/name'.»»»
  And:
  "Header Member bad COFF library."

  I read the docs of minGW, to check, it produces complaint COFF files, by default, but obviously there is something that I missed.

  The dll is simple (two exported functions) and programme aid is even simpler, a main() with a single call to one of the dll_exports.  The following files are included in the attached zip file:

  files for building executable in LabWindows/CVI:
  LWCVI_use_test_dll.c
  LWCVI_use_test_dll.CWS
  LWCVI_use_test_dll.prj
  test_dll.h
  test_dll.lib
  test_dll.dll

  files for the creation of DLL using minGW

  test_dll.h

  test_dll.c

  The following #define is also used to export the minGW project function

  #define DLL_EXPORT __declspec (dllexport)

  Any help will be greatly appreciated
  Thank you
  RYK

  There is something wrong with test_dll.lib, but I don't know what it is.

  You can, however, generate an alternative import within the ICB library comes from the test_dll.h file. Open this file in CVI, remove the #include line, then use the Options | Generate the DLL import library... menu item to generate a new library.

  The import library that I generated using this method is attached.

• Randomly generate movieClips from the library onto the stage

  Hello

  I'm calling the objects from the library for a collection set.

  Major problems with how best to attribute the good and bad objects update later a score.

  Can anyone help me how can I first assign the clips in the library in an array of good and bad and then after randomally fill the stage with them.

  Concerning

  James

  see you never fake in your output panel, when using:

  public void placeWords() {}

  random location

  var x: Number = Math.floor (Math.random () * mapRect.width) + mapRect.x;

  var y: Number = Math.floor (Math.random () * mapRect.height) + mapRect.y;

  check all blocks to see if it's over everything

  var isOnBlock:Boolean = false;

  for (var j: int = 0; j

  If (blocks [j].hitTestPoint(x+gamesprite.x,y+gamesprite.y)) {}

  isOnBlock = true;

  break;

  }

  }

  not on everything, so use location

  trace (isOnBlock);

  If (! isOnBlock)

  {

  var goodObjects:Array = ["WordObject1"];

  var badObjects:Array = ["WordObject2"];

  If (Math.Random)<>

  {

  var r: int = Math.floor (Math.random () * goodObjects.length);

  var classRef: Class = getDefinitionByName (goodObjects [r]) in class;

  var newObject:MovieClip = new classRef();

  newObject.typestr = "good";

  } else

  {

  r = Math.floor (Math.random () * badObjects.length);

  classRef = getDefinitionByName(badObjects[r]) in class;

  newObject = new classRef();

  newObject.typestr = "bad";

  }

  gamesprite.addChild (newObject);

  newObject.x = Math.floor (Math.random () * stage.stageWidth);

  newObject.y = Math.floor (Math.random () * stage.stageHeight);

  break;

  }

  }

• Do not click on old iPhoto library in Bridge CS5. It converts images of the .pkg file

  Hi fellow users. I'm using Snow Leopard 10.6.4 Adbobe CS5 Bridge and iPhoto 8.1.2.

  I have multiple iPhoto libraries stored in the folder my pictures. If I click on an iPhoto library somewhat current bridge, iPhoto lance and (according to the version of iPhoto package), displays the photo library in iPhoto.

  WARNING WARNING WARNING: Do not THROW OLD iPHOTO LIBRARIES FROM BRIDGE CS5

  If I click on an OLD deck of iPhoto from the bridge, he launched iPhoto but iPhoto doesn't display the library.

  What happens next is bad. Somehow the entire 'Images' folder is now considered by the dysfunctional finder as an iPhoto library or a "package". I had two happen.

  ---------

  The fix. From a finder window, you can right click on the photos icon and 'display the contents of the package. Drag the contents to a new folder. Remove the package of photos. If you wish, rename the new folder "Images". You may help iPhoto find your library again the next time that you open it. You will not be able to pass the package of photos to the Recycle Bin without loggin as user root (Apple can guide you through this).

  Good luck and be warned.

  -Go Steelers

  What happens next is bad. Somehow the entire 'Images' folder is now regarded by

  the dysfunctional finder as an iPhoto library or a "package". I had

  both occur.

  As I don't have a single iPhoto Library I can see the icon and when clicked

  It opens iPhoto forward.

  I don't have much experience with iPhoto and don't like the way you work

  with a library in a package hidden instead of a folder structure opened as

  Bridge of fact.

  Do not understand what you mean with the old library. If you rename the previous

  versions of the iPhoto library or do create you several libraries for different

  projects?

  Anyway, as Lao Tai already said, iPhoto library is a package and therefore

  not supposed to see photos in Bridge.

  Assuming that you have a back up of libraries you can replace without

  a lot of damage but you can first check if you can open the file

  See the contents of the package.

  In the Finder, select the file that you describe and right of the mouse and then click

  choose show package contents from the context menu.

  Do this also with your current library and place them side by side

  Compare the differences.

  The safest way to get your originals is in the same way, choose view

  content and find the "originals" folder

  Copy (if you are still able to use iPhoto, if for some reason any one)

  do) this content to the new folders in the finder (of course outside of the)

  the contents of the iPhoto library) and after doing so point bridge to

  These folders to use images in Bridge and Psalm

• Adjustmens disappeared after you open in photoshop

  At the time, I have a strange problem. If I make a few adjustmens in mode "try" and after I open the picture in photoshop and then back to lightroom, the adjustmens disappeared.

  I hope someone can help me with this...

  AdobeUser2004 wrote:

  I used DNG (Raw, Leica camera), Tif and PSD.

  If I make an adjustment in Lightroom on the DNG file, for example the highlights and then open it in Adobe Photoshop and back to Lightroom, adjustments have disappeared... These SLA arrive with Tif and PSD. If I open Adobe Photoshop with a DNG file, there is no options, Photoshops opens directly. I don't want to open with "Copy with LR adjustments", because I want to change only the adjustments in Lightroom, so that I can always change it...

  I reinstall Lightroom and I remove the plugins, but the problem remains...

  Not sure what you mean when you say "when I come back to LR adjustments disappeared? What file are you watching? The original DNG or the SAVED TIF or PSD that is added to the LR catalog, once it is sent to, edited in PS and saved.

  Please not that the library module cannot display the most recent adjustments in the develop module. What is displayed in the library module is an overview LR creates and it takes time for the previews to be updated with the most recent adjustment.

  If you look at the saved TIF or PSD referred to LR these images are totally new and won't list the LR adjustment in the Panel of historical develop LR module.

  If you look at the original DNG in the develop module and you 'think' adjustments were removed look at the section of history on the left to see if nothing is indicated.

  Just you get only these options when you send a TIF, PSD or a JPG to Psalm allows so working on what you see when you send an original image of Leica DNG in PS with LR adjustments. (P. S. I have also used Leica cameras most of my life and had 2 M8s)

  Also please stop saying 'Open in PS' and start to use "send to or change in ' PS for myself and others don't get confused that you use Bridge or PS to open the image in PS.

• Photosmart C7180 printing problem

  So, here's a strange, my Photosmart C7180 age of 9 months has developed a bad habit to print all pages in landscape mode. I used the printer almost daily for 9 months, but 2 days ago I started to notice this weird quirk when printing multiple-page documents. I can't verify what may have triggered (this software or an OS update) because it is possible that I haven't printed documents several pages for a few weeks. I checked for the OS/App/Firmware updates and checked that I have the latest drivers and software. I restarted the two systems and reset the default settings for the printer.

  I can print a single page in Portrait mode, but if I have 3 pages print the 2nd page comes out in landscape. I can print the 2nd page individually and it is fine. It happens that I print from Microsoft Word, or even if you use the Microsoft Photo Editor or HP Photosmart software.

  I use the TCP/IP connection to print from my laptop Microsoft XP (even though I just checked that this happens when you use Bluetooth as well).

  Everyone knows it or have one could explain why it seems to be possesed?

  Hello

  try turning off the advanced printer printing functionality

  > Control Panel

  > Printers and faxes

  > right-click your printer icon by default which is c7180

  > select Properties

  > click on Advanced tab in the Properties window

  > uncheck the box saying ACTIVATE a FEATURE of PRINTING ADVANCES

  > hit apply, then press ok.

  > then try to print your documents

  Kind regards

  Kiko

• My speakers to ear crackling.

  So I got my phone on 21/09/11 local verizon store. He developed a bad crackle inside the ear today. Volume was about 60% its never been used at max volume because it was strong enough. Now the crackling because his inferiors and 100% flight remain difficult to hear and crackling becomes stronger. Certainly a blown speaker. So I stand a chance of getting a new phone, when I go to the store? Its my phone I can't send it and be without a phone while it is fixed. The phone has worked after a reset last week, that he had been often before freezing and bsod now that it sucks lol.

  OK, this is weird because I don't really want to send this phone because I tweaked to my liking. I'm looking for and on a droid x forum someone had the same problem and mention if you create a vacuum around speaker of the ear with mouth and slightly suck or blow it fixed sound crackling. I thought that what the hell I tried both blow has not worked, but sucking stopped toward the inside of the cracking 100% and its back to normal. It's weird, but I'm happy.

• Generating a signal 10-bit via USB-6363

  Greetings,

  I need to characterize a 10-bit DAC at work using Labview and NI USB-6363. I have very little experience using Labview and need of a direction for this task. We are only interested in the INL and DNL. What I have in mind is to show the binary signal 10 to the DAC. Output of the DAC will a digital multimeter which is related to the USB connection to Labview via IEEE-488.

  I have all this configuration, I just get lost with the way to do this in Labview. Thank you!

  Hi joeyjojo,.

  The USB-6363 use daqmx as mentioned Jason library. A good overview of the daqmx driver can be found here. Looks like you have the digital generation. Definitely check the examples that Jason sent you... especially one called write digital channel.

  Use of the DAQmx write VI to set up the device to read a digital 2D U32 NChannel NSample. This will take in a table where each row corresponds to a new channel and 2D each column is a new sample. You can also view the daqmx help to get a better explanation of Scripture Daqmx. "To access help daqmx you, just go to help" using LabVIEW. In the Heirachey, to open VI and function reference' live action e/s and functions"DAQmx - live acquisition of data and functions" additional information and there will be a section in there about DAQmx write.

  The best idea would probably be to start coding and let us know if you get some error. In addition, if you have never used LabVIEW, he could search in our DAQ and LabVIEW training. Keep us how we can help!

• computer freezes and turns off

  my desktop computer has developed a bad habit og gel and closing down and restarting on its own.  How can I fix this please.

  Hello

  You can ask in the Windows Forum of answers corresponding to your version of Windows.

  Windows answers forums
  http://answers.Microsoft.com/en-us/Windows

  ================================================================

  However the help, please start a new thread in the Windows Forum of correct answers

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.

  To be able to remove ALL and reinstall all the memory cards and cables (both ends where possible)-in fact
  delete and replace - do not just tight. Remove the dust bunnies and clean the vents. Make sure that the
  the fans run (before and after opening the case). If a laptop on what you can do is reinstall
  memory and clean the ventilation openings (still may try to add a small fan as a test).

  This sounds like material so if the above does not help you then probably need the help of a real
  computer store (not the leeks and the glances at a Best Buy or other stores) or system manufacturer
  Supported.

  Use methods such as the SFC, CheckDisk, driver updates, and others in the resolution of the issues identified
  at this link as they will help solve or at least narrow down the questions. After that you can post the
  information of BlueScreenView and these other utilities, so we can offer more specific advice. Of
  check with a real store of the computer or the system manufacturer's support would be a good idea though
  I would try the possible solutions, you can first.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  Windows 7
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  Vista
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  XP is similar to Windows 7 and VIsta except that you would RUN in place of start - search.

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites. You must try to resolve or reduce problems - when there's that much
  material different from Bug_Check is usually involved.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Mini 1000

  I have a laptop HP Mini 1000, model #1154NR.
  I have had him since September 2009 and it's probably about due to a new battery.
  "Battery Check" says he has developed a bad cell and needs to be replaced.
  Also, I have to constantly move the plug-in "cord" to keep load.

  The problem is, the operating system is Windows XP, and of course, there a
  a hard time juggling with newer software.
  So, it can be reformatted and use a version of Windows 7?

  If I had to send in for a new battery and software change along with a
  tune-up, how much can cost me? Or, I'd just better get
  a new laptop.

  main problem with these is a very bad CPU performance.

  On only 2 improvements are mounting a SSD & Windows 7, but even then it won't be a huge improvement & settle software av hard & have startup processes useless you won't see much of the gains.

  Your best bet is to just keep it as a spare & using the funds to buy a more recent machine...

• [8510w] system shuts down / is not start when the card is inserted

  Hello
  my old 8510w developed a bad thing - when the power cord is inserted, system will shut down. Works fine on battery.
  Symptoms:

  1. stops when the power cord is inserted;
  2. does not start then on the power supply;
  3. charge led flashes in unusual ways - led is quite low, but gets a little more brilliant ca once per second;
  4. power led lights also dimmed down mode.

  I tried another adapter as well, so that should be good. I would like to know if this problem is known and could be repaired (quite easily), or there is no point to this end by like old computer as 8510w.

  -------------------------------
  8510w
  Debian Wheezy / Win7

  Measure the output voltage of the AC adapter does not prevent the failure of adapter to even the slightest charge.

  If the laptop will not start even with an identical power adapter connected and remove the battery, then it is very likely that the electric distribution/charging circuit on the map system of the laptop has a faulty component.  If you're a troubleshoting capableof until the component level and bulbs to solder you can fix the system board. Most people choose to replace the motherboard or laptop.

• HP dv6000 hard drive update

  Hello

  I have a HP Pavilion dv6000. the machine is about 2 years. the hard drive (150 gig) develop some bad sectors and it seems the right way to replace it. So the following questions:

  1. can I replace it myself or should I send to HP?

  2. What can I upgrade to?

  3 is it advisable to upgrade the ram (1 GB) as well?

  Thank you

  Jaco

  Depending on the exact model, it peaks at 2 or 4 GB. The upgrade from 2 to 4 concerts only makes sense in my opinion if you want to use 64-bit Windows. Otherwise, even with 4 gigs installed, the computer can not use more than 3 gigs.

  7200 TPM have caused problems with the old part of the dv6000 series; models with numbers dv6499 and less. That also tends to be the line of demarcation between the units of max to 2 GB and maxing out at 4.