Developer SQL has stopped working

Similar Questions

• 6 Lightroom Develop module has stopped working.

  The module development suddenly stopped working. I use lightroom almost every day. I have imported a new group of photos into the library and went to develop as usual. I see the photo on the screen, as usual, but Ant changes that I do, like exposure, do not change the picture. I try to crop the photo and he disappears, replaced by solid gray. I'm a Nikon D600 raw photos editing. With the help of Windows 10. Yet once, I use it regularly. Don't make any changes to the system. Develop all of a sudden stopped doing anything.

  This could be caused by a profile of defective screen, delivered by an update of Windows or installed during the upgrade of Windows 10.

  You can set the monitor to sRGB profile, (temporarily) If this solves the problem, it is a confirmation that the profile is bad.

  Then, you ideally calibrate your monitor with a standard material, which will create a new and accurate profile.

  To set the monitor to sRGB profile:

  Press the Windows key + R, type colorcpl, and then press ENTER.

  Add the sRGB profile, and then set as default profile. See screenshot (from Windows 7) below.

  

• After upgrading to 5.5 together develop mode has stopped working.

  I can adjust the sliders as much as I want, without result. Deleted files pref according to another to find an answer, no results. Any idea? Race: Lightroom version: 5.5 [968504] OS: Mac OS 10 Version: 10.9 [4] application architecture: x 64 number of logical processors: 4 CPU speed: 2.4 GHz memory: 8192,0 MB.

  Have a stand-alone version, no CC, no contract just a standalone full blown license (paid) version.

  Any idea on how to get that back to work?

  Thank you.

  So, seems that I found a solution. Returned to version 5.4. Started the 'develop Module tips' under 'Help' and that seems to trigger something that made it work again. So thanks a lot for your help! Happy photo again to change!

• Development in error "Installer.exe has stopped working" while installing the new modem.

  Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please

  Log name: Application

  Source: Application error

  Date: 2010-01-03 02:04:50

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Monica-PC

  Description:

  Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.

  The event XML:

  1000

  2

  100

  0 x 80000000000000

  309

  Application

  Monica-PC

  Installer.exe

  0.0.0.0

  4b 208462

  Installer.exe

  0.0.0.0

  4b 208462

  40000015

  0002efec

  ADC

  01cab8b5797299e1

  Hi Tonio saini,.

  Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.

  You can also check the following link, try the suggestions and check if that helps:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• While I am trying to install SQL server, I get an error 'install SQL bootsrapper has stopped working ".

  While I am trying to install SQL Server, I get this error message:

  native sql install bootstrapper has stopped working

  Could someone please help me solve this problem?

  I tried both power and windows checked.net 3.5 features even if I do not receive.

  

  Hello

  Question also need to collect files of dump for further investigation, I would suggest that you open a folder CSS Microsoft (http://support.microsoft.com/). There will be a technical support engineer assigned to analysis the dump files and give you a solution to this problem.

  For information about how to collect SQL Server dump files, see http://support.microsoft.com/kb/917825.

  OR

  Please try now;

  1. access to the option programs and features.
  2. go to the Turn Windows features On or Off function.
  3. turn on all the options within the Microsoft .NET Framework 3.5.1 option.
  4. click OK to apply the updates.
  5. once updated, try again to install.

• sqldeveloper64W.exe has stopped working

  Summary of the problem

  ---------------------------------------------------

  Error message: sqldeveloper64W.exe has stopped working when you try to open the .sql files

  Description of the problem

  ---------------------------------------------------

  Breast of SQL Developer 4.0, I went into Preferences > File Types, find the extension .sql and checked the box that says Open with SQL Developer.  I went to the Associations the value Control Panel in Windows 7 Professional 64 bit and confirmed that the current default is set to sqldeveloper64W.  I have used the CMD function for access to regedit, deleted the file associations for .sql and return all preferences.  If the SQL Developer is not already open on my machine and I am trying to open a .sql file, the application starts very well.  If I try to open additional files in the windows or windows Search Explorer, I get an APPCRASH indicating that sqldeveloper64W.exe has stopped working.  I click close the program and developer sql remains open, but my file does not open.

  Error codes

  ---------------------------------------------------

  sqldeveloper64W.exe has stopped working

  Try changing the sqldeveloper64.exe shortcut instead. This will give you the CMD window when it is opened. We'll see if we get interest error messages here when you try to open additional files.

  Once you run SQL Developer time away - force look for a 64-bit JDK, you can simply run the main sqldeveloper.exe in the main folder...

• sqldeveloper.exe has stopped working

  I get this message that says "sqldeveloper.exe has stopped working" when I double click on a file .sql using windows Explorer 7. My sqldeveloper application is already running and remains in place and connected to the database server. My two options on this line are 'close program' and 'check online for a solution. " I chose "close the program", but the program does not close. 'find a solution online' does nothing. There is no associated icon .sql files displaying in Explorer. Should there be?
  If I use sqldeveloper to navigate to a .sql it will open it. He can't open the .sql files. But I also have to work when you search for files by using windows Explorer.
  Anyone have this problem? If so, how to solve it?

  You drag the older plants? I don't normally open windows files, but I did the other day and he starts SQL Developer 1.5. I used 2.1 and then several pre-releases from 3 up to production given that I used last 1.5. It seems that associations not updated files.

  Maybe you have an old facility, non-working, which is giving you the problem.

• After installing the update tabs 26.0 fox has stopped working

  I have Windows 7 on both of my computers. After updating firefox to 26 my tabs fox has stopped working. It shows that it is enabled, but I get a white screen. I can't edit or save all Web sites to the best sites.

  In fact, the developer has a new version which is awaiting review. If you want to install now until the Add-ons site admins finish to check it out, you can find it on the page of 'Versions' here:

  https://addons.Mozilla.org/firefox/addon/FoxTab/versions/

• Satellite L300 - 2CL - built in mic has stopped working

  Hello

  When I bought this computer (sep-09) everything worked fine. Then in March (I hade it idle for some time), my built in mic has stopped working.

  What eles is fina, and I scanned the Web for solutions and tried to install the new drivers, unistall them, all possible boots, disabel and restart, but at most I just get a static sound of my recordings of test.

  I use win 7 home pre, but the problems started when I was with Vista. Now, I am of ideas, and my friends on Skype develops enough not to hear me.

  Is that what I can do to get the microphone working, or should I buy a headset?

  Grateful for help
  Hugo

  Hi mate

  To be honest, I would use a helmet because helmet still provides a better speak of quality.

  But the internal MIC is part of the webcam and the microphone is controlled by the software of webcam too.
  Please launch the webcam software and go to settings.
  Then, choose Audio tab.
  Here, you must increase the volume to maximum.

  Welcome them

• RTFTrack has stopped working message followed computer crash

  I have a Lenovo Edge 15 (got 11/03/15). Recently, when using SKYPE, making a video call, a box has developed indicating that RTFTrack has stopped working. The screen becomes white, then the computer crashes. So my call is disconnected, my computer restart and I have to log in again, open SKYPE, etc. What happened 5 times in the last three weeks. What can I do to fix this?

  Apparently RTFTrack is from Realtek Semiconductor and RTFTrack appears in my Start Menu and begin to start my computer.

  I appreciate your help with this. Thank you.

  I updated my driver of the camera from the 20/03/15 update driver on Lenovo's Support page for my 15 Edge and the problem has not yet appeared. I'm keeping my fingers crossed.

• Internet Explore has stopped working - question of the biometric authentication service

  My Elitebook 8540p has developed a problem where I get the error message - Internet Explorer has stopped working... Turn it back on.     I am running Windows 7 32 bit.   And using IE9.

  After some internet reading, I started my services of neutralization.    I finally got down to a service that is causing the problem.

  Biometric Authentication Service Digital Persona Inc.

  When I disable the service in the services of the MSconfig System Configuration and reboot, I use internet explore without any problem.    (I've identified some Web pages which would agrivate the question.)

  The deactivation of the Service of Authenticaton of Biomitric causes the scanner to not work.     I tried to reload the driver for fingerprint reader, and the HP Protect tools Security Manager.

  Any idea how I can activate the biometric authentication Service and not IE stopped working the issue?

  j1bissig

  I had the same problem on my HP Pavilion dv7 and had the chance of getting a solution.

  I, too, put the finger on biometric authentication as the problem Service.  By disabling the service, Internet Explorer worked well; except, now, I had no finger analysis feature.  I installed the latest version and it worked for a few sessions and then the problem comes back.

  Looking at my updates, I realized that the Flash is set to update at the same time, the problem started.  I tested by activating the biometric authentication Service.  Instead, I disabled the Flash add-on in Internet Explorer and it did not work again; except, now, I had no Flash.

  Searching online, I came across this post from Adobe:

  Post on the Adobe Forum: IE9, Windows 7 64-bit Flash causes "Internet Explorer has stopped working".

  I followed the instructions in this post, including the "clean install" and reverted to version 10.3 of Flash.

  Post on the Adobe Forum: how to return to a previous version of Flash Player?

  Now, all the features work correctly.

  I hope this helps!

• I received error messages saying that hl2.exe has stopped working.

  HL2.exe has stopped working?

  original title: hl2.exe has stopped working

  Hi 1patrick1!

  Thanks for posting your question.  Here is some important information about the hl2.exe that can help.

  HL2. EXE has stopped working the issue

  Game error: HL2. EXE has stopped working

  Important:

  Please read the FAQ in the link below to determine if your question should be directed to the developer of the game or to the Steam support:

  Third-party game support

  General troubleshooting

  Game crashes can have several different causes depending on your system. The best way to determine that the problem is caused by East follow this guide first:

  Troubleshooting game crashes

  Windows Vista users

  There are several patches available for Vista users and Vista users with Nvidia cards. We recommend that you follow the Guide Windows Vista in its entirety.

  Anti-virus software

  Some software anti-virus and anti-spyware such as Norton/Symantec, AVG 7.5, Avast, Spyware Doctor and Nod32 have been confirmed to cause the game crashes with Source engine games. If disabling your antivirus software or security is not enough, you can consider completely uninstalling these applications until an update is published by the developers of antivirus software that resolves these compatibility issues. More information found in the section troubleshooting game crashes FAQ linked above.

  Background applications

  Graphically intense games such as half-life 2: Episode Two and Team Fortress 2 require a lot of your system resources to operate. Having background applications being run while you play can often result in the game engine competing for resources with other applications system. Often, this can cause the game to crash because it is not free enough for the game to use system resources. Please follow the guide below for more information:

  Disabling background Applications

  It is also important to ensure that your system has enough available expanded memory. Please follow this guide for more information.

  Hope it will be informative for you.

  The respect of

  Anurag Shukla
  Microsoft Certified Professional

• "Microsoft.MDX.DemoScheduler has stopped working".

  Starting my new laptop (ex IE display Toshiba) a message box "Microsoft.MDX.DemoScheduler has stopped working" "Windows is checking for a solution to the problem."

  Then she disappears after 20-30 seconds.

  Any ideas?

  Stu

  Hello

  I received this hit when I searched in Bing:

  http://msdn.Microsoft.com/en-us/library/aa216775 (SQL.80) .aspx

  I would recommend reposting in The Forum Technet SQL Server

• Internet Explore has stopped working

  Here's my situation. I had left my computer desk sitting for 20 minutes and come back that he had gone to bed. I hit the space bar on the keyboard to wake him up. Then I find all my pages explore had liquidated or something. I had used the computer very well throughout the day now he decides to give me a problem.

  I try to open Internet Explorer Windows and get this message in a little box that goes up after apparently in analyzing a problem

  Internet Explorer has stopped working

  "A problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available.

  Well, I'm lucky, I can get on my laptop to marry and makes this type.  I tried to restart my computer and whenever I try to open internet explore I get the same message. Why is this happening? Everything worked well. I saw something on something KB and it redirects to a page Web say about it. But with no way to even do anything on the Explorer how to fix this? This is not the case on this laptop so why on the desktop. They both have the same Internet Explorer and Windows 7

  I like how he says he'll let know me if a solution is available. How can you if the Explorer doesn't correctly?

  Someone at - it solutions to this problem? Thanks in advance. I hope that it is something which will be developed on its own, but whenever I tried to restart it it will not work correctly.

  To reset internet Explorer

  1. Close all Internet Explorer Windows and Explorer that is currently open.
  2. Start Internet Explorer.
     Note If you are running Windows 8.1 or Windows 8, start Internet Explorer on the desktop. Change your settings will affect Internet Explorer and Internet Explorer that you start from the office.
  3. On the Tools menu, tap or click options Internet. If you don't see the Tools menu, press ALT.
  4. In the Internet Options window, tap or click the Advanced tab.
  5. Press or click reset. If you are using Windows Internet Explorer 6, click restore default.

• APPCRASH module name btwapi.dll getting the error "Windows Explorer has stopped working... »

  Hello
  In the home edition of Vista 32 IE 8 when I get the "search for files and folders:

  «Windows Explorer has stopped working...» "and in the watch box Details view:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Explorer.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01da5
  Fault Module name: btwapi.dll
  Fault Module Version: 6.0.1.5500
  Timestamp of Module error: 46df031a
  Exception code: c0000005
  Exception offset: b 0004, 091
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  I hope you can help me on this...
  Thanks a lot guys.

  Hi PaulMazor,

  Well first of all, btwapi.dll is a process no system developed by Bluetooth. If you go on your computer, try to disable Bluetooth by going to network and Internet or however your wireless interface is configured on your computer. If you don't have Bluetooth on your computer, try to uninstall it. go to start > Control Panel > programs > uninstall programs > scroll down and uninstall. My last suggesting opens upward, the Windows Task Manager (press ctrl + alt + delete and release). Go to processes and disable the application there. Other that that, I can't help you any further.
  Good luck
  DJ