device driver tries to install windows mobile device based on pc starts

Similar Questions

• my camera does not work. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have Thinkpad E420 Laptap. Syed

  Built-in camera does not work on my laptop Lenovo Thinkpad E420. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have windows 8 Windows 7 upgrade.

  Appreciate your help. Thank you.

  Syed

  Hi Syed,

  Thanks for the reply with the status of the issue.

  I suggest you try to install the drivers for Windows 7 in compatibility mode and check if it works for you. I saw this troubleshooting procedure described working for other members of the community.

  Step 1: Download the driver for the Webcam from this link of Lenovo.

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS015018

  Step 2: Installing the driver in compatibility mode.

  Make the programs more compatible with this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please reply with the status of the issue, so that we can confirm that the issue is resolved.

• Not able to install Windows mobile device Center 6.1 in the context of the system

  Hi all

  We are not able to install Windows Mobile device Center 6.1 in the context of the system. We have only 2 options to install any application via SCCM. (1) user, 2) system context. In the context of the user, we will not be able to install the application and system installation of context is a failure. Exe installs fine when we run as admin, but we do not have admin context option in SCCM 2012. Please confirm that we have any other new exe or we can not install in the system context.

  Kind regards

  Ashok

  To help you install Windows Mobile Device Center on Windows 7, see the Jason-H position of this link.

  Let us know how it goes.

  Thank you.

• I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen "select the driver to install."

  Device drivers for a Win 7 install on Ubuntu system

  Hello

  I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed.  I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not...  So, how do you get drivers for Windows can install (or y at - it another way to work around it)?

  Thank you!

  The bios on fail safe defaults options are?

  It will probably take the raid driver

• new hard drive for laptop computer tried to install windows XP

  Just fitted new hard drive for laptop computer tried to install windows XP, continues by saying can not find any hard disk. any help would be appreciated

  Hi JohnJelf,

  ·         What is the brand and model of the laptop?

  ·         What is the full error message?

  ·         The new hard drive detected in BIOS?

  I suggest you to contact the manufacturer of the laptop computer for more help and information.

• STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

  Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

  STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

  Hello

  See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

• I am trying to install Windows 7 on my hard drive, but the installer tells me that I need the driver "Promise Technology Inc. Ultra IDE Controller".

  I'm trying to install Windows 7 on a (40.1 GB) partition on my hard drive, but the installer tells me that I need the driver (Promise Technology Inc. Ultra IDE Controller.  I searched the Internet and tried several, but no results.  Can someone point me in the right direction.  I have a box to open with Technical Support, but not a lot of help out there.

  Thanks in advance

  Joe Franklin

  original title: installation of Windows 7

  Hey Joe,

  I suggest that you visit the gigabyte website for your region (and/or the site global http://www.gigabyte.com/?f=g ) and check your motherboard for compatibility with Windows 7.

  The problem you are experiencing would imply that Windows 7 has no native driver support for your disk controller, so if Gigabyte don't have drivers that you are locked unless you buy a discreet disk controller that is compatible Windows 7.

  Please mark this as useful or response if applicable.

  On the other hand, you have this posted in a forum of Windows XP when it is really a problem of Windows 7.

  Tricky

• I am trying to install Windows Server 2008. When I get to the part where I should choose where the operating system is to be installed, it is blank.

  I am trying to install Windows Server 2008. When I get to the part where I should choose where the operating system is to be installed, it is blank. He told me 'No device found drivers. We see the SATA HDD in BIOS, and if I browse for the drivers, the driver is displayed. I used the command line packaged with the installer to format the drive, just to be sure. It is formatted in NTFS.

  original title: can not select the HARD drive to install on

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• I am trying to install Windows XP Home Edition on Xp Pro. How do I?

  I am trying to install Windows XP Home Edition on XP Pro. How do I? I load it in the drive, reboot and it won't work.

  Without going into why you might want to do this, you may access your computer's BIOS and change the order of boot devices so that it looks first at the CD player.  When you start the computer, watch the screen carefully.  There will be a message that says something like, "to change the system settings, press F1.  The exact text, as well as the key, may be different.

  Restart the computer and press the key as soon as you see the message (you'll probably just a few seconds).  Once you are in the BIOS configuration utility, navigate using the arrow keys, the tab and button.  Navigation instructions usually appear at the bottom of each screen.

  Here's a 'how to' with screenshots.  Your computer may not be identical, but this should help you in the right direction: http://pcsupport.about.com/od/fixtheproblem/ss/bootorderchange.htm

• error 0x8080CBB1 when trying to install Windows Xp

  I tried to install Windows Xp when all of a sudden a blue screen with error message "IRQL_NOT_LESS_OR_EQUAL" with the code STOP: 0x0000000A (0x00000002, 0x00000000, 0 x 00000065, 0x8080CBB1) rises and impossible to complete the installation.

  Hello

  This problem may occur if there is incompatible hardware or an incompatible device on your computer driver.

  Refer to this article for help:

  Error message "Stop 0x0000000A Irql_Not_Less_or_Equal ' during the upgrade to Windows XP
  http://support.Microsoft.com/kb/311564

  See also:

  
  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I am trying to install Windows XP and during the process, a message appears with the title "RUNDLL__Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.

  I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
  "Error in iesetup.dll Missing entry: IEAccessSysInst.  The process then stops and I cannot make progress.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• no pilot of the aircraft were found when trying to install windows 7 on a new construction

  It is a new construction: card mother Asus M4A87TD/USB3, Phenom X 4 965 processor he's, with 1 64 GB Soild State drive which is where Windows 7 Pro must be installed, Raid 2 500 GB SATA hard drives that I use, total 8 GB memory Dual Channel DDR-1600 and an ATI Radeon HD5830 1024 GDDR5 video card.

  I am now trying to install windows and I get an error message saying that no device drivers found when you try to install windows 7 pro, so I tried to put in the disc that came with the motherboard because that's what I found during my research on this subject and it won't read the disc. I also learned that I should use a USB however, I don't have a large enough to copy documents from the disk device drivers.

  Any input would be appreciated because I was a machine now for a week only to find what I wanted and then in construction and now this problem - please help

  Suggest you only begin by installing a configuration non-RAID first. Also since this is a new construction, you need to do some test equipment to verify that you don't have a hardware problem. Connect a SATA drive to a standard SATA connector rather than the RAID connector.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use any automatic overclocking BIOS features, Intel EIST or Turbo Mode (turn off).
  then back at the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.

  First try running Memtest86 +:  It runs from a floppy disk or CD, you must remove or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD)
  and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
  For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the motherboard may have
  older less stable drivers.

  Check the manufacture of graphics card download site: Download and install the latest drivers for Windows 7
  for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
  35 to 40 ° C at idle and 60-65 c max when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
  for each memory location is full.
  #2 Note:
  COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Hiren BootCD
  http://www.Hiren.info/pages/Bootcd
  Hiren BootCD from USB (USB key)
  http://www.Hiren.info/pages/Bootcd-on-USB-disk
  (something more questions)

  UBCD4Win:
  http://www.UBCD4Win.com/index.htm
  UBCD4Win is a recovery CD bootable that contains software used for repairing,
  restoration or diagnose almost any computer problem.

  MyEventViewer - an easy way to display your event logs:
  http://www.NirSoft.NET/utils/my_event_viewer.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• New HARD drive - how to install Windows?

  Hey guys,.

  I have a problem with my Dell Dimension 9150. A friend of mine gave me as a gift, because I built his new computer. We put his HARD drive in his new computer.

  The problem is: there is no CD of his computer.

  I have the original Windows XP and Windows MCE and CD licenses. The Dimension has a MCE key so I would like to install MCE.

  After installing a new HARD drive, I tried to install Windows. BIOS shows me the HARD drive. When I start the installation of Windows and choose "Windows Installer", I get to the screen where I can choose, what partition I would use. But installing Windows shows me no HARD drive!

  Don't know if I need SATA drivers? If I should need it, where can I find them? And how to get them in the Windows installation? I know that I can load pressing F6, but I don't have a floppy device.

  Would be great, if someone could help me.

  
  

• my computer went non responsive after trying to install windows 7

  My office while trying to install windows 7 has stpped answer after 1 hour, still nothing 1 hour later, approximateley ideas?

  Start by unplugging devices external, discs additional (just leave the reader who connected Windows installed. For laptops to ensure that you are connected to an electrical outlet and not running off the battery voltage.

  J W Stuart: http://www.pagestart.com

• While trying to install windows updates, I get an error 57F Code - Windows Update encountered an unknown error.

  For months, that I tried to install windows updates and continually get 57F error Code - Windows Update encountered an unknown error.  I'm now 9 updates important and 2 Optional updates that have failed to be updated.  I am running Windows Vista Home Premium. Help, please!

  Office 2007 are in guess some updates.

  1. ensure that you are logoned on with an administrator account and that the computer can access the Internet properly.

  2 - Insert the Office 2007 CD drive of the computer installation CD, then check if updates Office can be installed.

  Did you use a registry cleaner?

  TaurArian [MVP] 2005-2010 - Update Services