device gets frozen Epson mode xp-600 recovery cannot reinstall firmware

Similar Questions

• Re: Satellite A500/026 get frozen and cannot close

  Satellite A500/026, I bought a month before, and actually use days perhaps only 14 days.

  That books get frozen after 5 minutes and can't stop, no matter what you do.
  I made the recovery of factory default. the first can not finished and frozen in the State. over twice the recovery, but the jelly still happens after 5 to 10 minutes. I don't know why these things happened on a brand new computer. What them to prove the quality for the Toshiba?

  Site Web de Toshiba have also any number of phone customer feedback or complaint hotline.
  I swear that not more product Toshiba for me, also include my family and all my friends.

  Hello

  I have no idea of what has happened with your laptop, but according to your assignment, the laptop freezes even using HARD drive recovery.
  In your case it s recommended to contact the ASP (certified partner) in your country. The laptop seems to be covered by the warranty that is why everything should be done for free.

  The ASP database in the world can be found here:
  http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service provider

  Welcome & good luck

• How to get out the mode safe mode with msconfig.

  I'm working on my computer and need to start in safe mode. I ran the msconfig and reboot the laptop. I get to the login screen, but when I get my username and password it tells me that the user name and password is not correct. How to get out the mode safe mode with msconfig.

  When you run msconfig to get set to Safe Mode, you just activate/check the option/SafeBoot at startup. INI tab or did you do something else?

  There is some malware that if you use the/SafeBoot option, you will not be able to use your system again until you remove the switch/SafeBoot the boot.ini for you can boot normally.

  Maybe it's not your exact problem, but I will never suggest to anyone to use the option / SafeBoot never again - too risky when troubleshooting since you can always start new or will never connect again until you remove the switch/SafeBoot.

  Anywho, if that's what you have done, you can start in the XP Recovery Console and then either make a new boot.ini file containing the switch/SafeBoot or simply rename the boot.ini file, you have something like boot.ini.old if you don't have a boot.ini file (I know it seems like a weird idea).

  In a single partition configuration, XP is not even a file boot.ini to boot.  XP will complain if there is no boot.ini file, but will always start very well without one (non-believers - try it!).

  After you get booted up and logged in, you can rename boot.ini.old in boot.ini and run msconfig to remove the option/SafeBoot, and never use it again.

• I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows."

  * Original title: start Windows 7

  I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows." When it disappears, the screen just goes black and nothing else happens. Logins appear not at all. I also tried to run in safe mode and safe mode with networking mode, but it has not loaded yet even to the windows splash screen. I ran Startup Repair 3 times now and he has not yet fixed my problem. I was wondering if it might have been damaged in the fall.

  Probably yes it is damaged in the case otherwise he would start.

• MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  Here are some links from Apple which may help

  How to choose a boot on your Mac - Apple Support drive

  On the screens, you see when you start your Mac - Apple Support

• EA6500 - devices get weird IPs and DNS servers

  Hi all

  I have just installed, updated firmware, but even if many problems have arisen, let me please you the list of people:

  (1) cable devices get weird IPs, the printer for instange to 10.168.122.100 always, it happens THAT the devices wired; the QNAP server had once 192.168.100.100, when it happens that of course devices do not appear on the network.
  My understanding is that all devices, related or not, must get the IPs between 192.168.1.100 and 155, it is the default value for the same router;

  (2) my laptop when telegraphed Gets an appropriate IP (192.168.1.xxxx), but STILL Gets a number of strange DNS, 10.168.122.1 server, and the Internet becomes unstable. It only happens in wireframe, when in the wireless, it gets the number of server DNS the same number of IP from the router (192.168.1.1), and the wifi works perfectly. Why get this strange DNS server number in wireframe only?

  (3) my phone VOIP Comwave gets no IP address at all, I tried everything (disconnect, repluigging each device in waiting 5 minutes etc.), nothing worked. She always returns 0.0.0.0

  (4) I tried both Open DNS numbers, and also numbers of DNS of Norton, as well to go through them but IP of the router always appear as a third option.

  Please, does anyone know what is happening?

  Thank you very much

  Mongao

  Hello world

  Thank you for helping; in fact, I think that I understand the question... I'm the one to blame!

  I had connected the LAN terminal VOIP to the router, not the correct terminal WAN; so I think that VOIP box polluted network transmission inside the weird IP numbers; shame on me

  I quickly tested last night and it seems that it works properly now;

  I do not have the issue of the third DNS number (the same as IP routers) appearing in all my devices, even after turning the pair of numbers to OpenDNS in the EA6500;

  Thank you very much

  Mongao

• Slide show gets frozen

  MY SLIDESHOW USED TO WORK VERY WELL, BUT NOW HE GETS FROZEN IN THE FIRST PICTURE AND DOES NOT WORK.

  Hello

  -What application you use to open the slide show?

  -You receive an error message?

  I suggest you to run the fixit and check if it helps.

  Fixed problems with Windows Live Photo Gallery that does not

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/en-us

  For reference:

  A screen saver that displays the images stops working in Windows

  http://support.Microsoft.com/kb/2425702

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Let us know the results.

• Bluescreen when trying to get into safe mode - stop 0 x 00000124

  It seems normal to normal mode, but if I tried to go into safe mode, it started to load files and all of a sudden blue screen.
  The code was: stop 0 x 00000124 (0 x 000003, 0x00000000, 0x000000, 0x000000)
  the zeros in the above code may not be correct, but the latest figures are accurate.
  So, what's the problem? How can I fix?

  (ps, my system's thinkpad T400 vista Business edition SP2. Was the reason why I wanted to get into safe mode, my new windows does not work recently.
  I wanted to see if I could do sth in safe mode. Anyway, it is not the problem I want to solve here.)

  Thank you very much.

  0 x 124 is a material error which sometimes causes of software.

  Since you are not able to get in good safe mode, the issue is almost certainly hardware.

  First, recommend set Optimized Defaults in the bios if possible.

  Recommends updating the bios most recent in dos mode if the manufacturer offers this possibility, then clean install Windows after the failure of the drive with Killdisk. You have certainly some problems of severe malware based on this: "my new windows does not work recently.

  Alternatively, you can put the drive into a desktop machine and then copy the last 5 files \Windows\Minidump - be careful of malware here though.

  Download them on Sky Drive public area then paste a link here. We can then in which pilots could play a role in the problem - but as I said - because the problem in safe mode, the issue is something to do with a faulty hardware.

  If you can get these files for us to normal mode by copying them on the desktop before downloading, then more power to you do it elsewhere instead.

  Check that the machine is not having a heat problem.

• Statrted of Vista in safe mode and systm recovery restores and no recoverydisk not found?

  Statrted of Vista in safe mode and systm recovery restores and no recoverydisk not found? Sys restore is off and will not turn on and due to safemode noting els / programs will not work. is there a way out?

  Hi Jeff,

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  If you are able to boot into safe mode without any problem, you can try to perform a clean boot and check if it helps.

  Method 1:

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  If you are always faced with the question, then you can check if you can start your computer by using the known last good Configuration feature and fix the problem.

  You can read the following article to do the same thing:

  Using the last good known Configuration

  Method 3:

  If the steps above fail, then you must have a full version of Windows Vista disk and try to perform a repair of the boot to WinRE (Windows Recovery Environment) boot from the installation disc.

  If restarting fails, then try to perform a restore of the system to WinRE (Windows Recovery Environment).

  For more information, you can consult the following article:

  What are the system recovery options in Windows Vista?

• I get a msg saying windows media player cannot delete a file from the device. What should I do?

  I put an album on my sansa fuse. The synchronization process has not finished now correctly the album does not work on my mp3 player. I tried to remove it so that I can re sync and im getting this msg saying "windows media player cannot delete a file from the device." I also tried to delete the album directly from the mp3 player and it does not always remove. What should I do?

  Hi danat4489,

  You can follow the steps described in the article below and then check if it makes a difference

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

• Sometimes, I am unable to get out of mode 'sleep'. After turning off my computer twice, he came out of sleep.

  Sometimes, I am unable to get out of mode 'sleep'. I had to close my computer twice before it went out of fashion 'sleep'

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  How to solve a problem of Mode for Vista and find a Solution

  See if the tutorial above and related links there, solves the problem.

  See you soon. Mick Murphy - Microsoft partner

• Continue to application play when the device goes into sleep mode

  Hey guys,.

  wondering if anyone knows how to maintain an active application when the unit goes into fashion watches?

  My application needs continue to work when the device goes into sleep mode if he went in that State by itself, or if the user put it to sleep.

  Yes I tried it on a physical device. It works, I promise you

  To clarify, here is what you will see when using KEEP_AWAKE:

  1 device shall not sleep when the application is currently active

  2. the device shall not sleep if the application is reduced, and you are in mode carousel

  3 device WILL sleep if the user switches to another application and full screen.

  In addition, another thing to know, if the unit is not assigned to the showcase mode, which is not by default, the audio stops when the user leaves your app. This is not related to sleep and is totally out of our control, but could be a good thing to add to your product details.

• There is workaround to get the playback mode by default when I start the software adobe reader DC?

  There is workaround to get the playback mode by default when I start the software adobe reader DC?

  Hi Keeperparma,

  There is no option in Acrobat reader to customize playback mode when you start the player, but you can configure for a specific file by using the "view original" feature of acrobat, but which apply only to this specific pdf.

  Kind regards

  Rahul

• I have CS5 and a d-600. I would like to use camera raw, but does not. I downloaded CR 7.3 and still does not. What I need to upgrade to CS6... or just throw everything out the window and get rid of my d-600?

  I have CS5 and a d-600. I would like to use camera raw, but does not. I downloaded CR 7.3 and still does not. What I need to upgrade to CS6... or just throw everything out the window and get rid of my d-600?

  It allows you to use your RC files, Adobe - Adobe Camera Raw and DNG Converter: for Windows

  Camera Raw: How to use Adobe DNG Converter - YouTube

• When I update my Windows XP, I get a message that the 2 updates cannot be updated. Here is the error message

  When I put update of windows xp I receive message 2 updates cannot been done here is what I get = - other hardware - Microsoft HID Non-User Input data filter (KB 911895)
  -Other hardware - Microsoft HID Non - User Input data filter (KB 911895) CAN
  you help me? Thanks when I update my Windows XP, I get a message that the 2 updates cannot be updated.  Here is the Microsoft - other hardware - error message HID Non-User Input data filter (KB 911895)
  Microsoft - other hardware - HID Non-User Input data filter (KB 911895) can you please help me
  André

  Hi MrPeanut,

  Welcome to the Microsoft answers site.

  This problem can occur because the device sends data of strength of signal for Windows. These data can be interpreted as input device real, such as the movement of the mouse, button activity or strikes. Therefore, this transmission can prevent Windows mode 'sleep'. Windows must enter "sleep" mode to activate the screen saver.

  I suggest that you update the drivers for all devices on the computer entry. You can update the drivers from Device Manager and check.

  See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work-good

  If the problem persists, then I suggest that you uninstall the update from Add/Remove programs in the control panel.

  Now, download you the link that resets the update reset Windows components from the following link: How to reset the Windows Update components?: http://support.microsoft.com/kb/971058

  Now start you the Windows updates and check.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.