Device not supported

Similar Questions

• Tecra M5 Management Console download says device not supported

  Version 3.5 of the management console says device not supported when I try to install? Yet, it was on the computer in the folder of the Toshiba driver and is even available on download for my Tecra M5 PTM50E model.

  Help please?

  Hello

  As suggested in your other discussions on the update of the BIOS, you must install common in order to install the other tools Toshiba and utility Modules.
  The common Modules is an essential component of Windows systems and it is necessary to other original programs for TOSHIBA to work properly.

  Welcome them

• audio device not supported Mac 6.1

  I just spent some time on telephone support to adobe tent to solve a problem, but only had a half fix.  I get an error of an audio device not supported on my Mac 6.1.  Nothing would in return play, I tried several fixes online, switching equipment, etc., but he was always pushing an error in audio device not supported (using audio devices in the Mac).  The problem was bypassed, then when we were able to create a global audio device that uses a webcam logitech for a microphone input and audio built-in for output.  Now I was getting sound and the guy said that the problem has been completely resolved and I'm good to go.  So I start to play my audio to the rear, and while it does not play back audio, he locked not able to go up to 44.1 Khz or 48 kHz 16 kHz.  Once I tried to remove the logitech camera is a no go once again.

  Everyone knows about this problem with the latest OSx and CC2015 Premiere Pro?  Is there a solution?  Also, we went in the Library preferences and renamed the 9.0 folder so that it created a new file, preferably without success on PR. (although it has fixed hearing).

  Tried with bars and tone as well as with images.

  Thanks in advance!

  To be more precise, it gave the following error:

  "The device settings could not be applied because the following error occurred:

  The sampling frequency is not supported by the current audio device.

  The last valid device settings will be used.

  SOLUTION

  I just removed my Logitech camera on the computer, and all of a sudden, it works like a charm...  Clogged again and it wouldn't work... unplugged it and it worked again. It seems that if no input is available, output cannot exceed the rate of sample entries (perhaps because of the recording VO feature?  Whatever it is, that fixed it.  If anyone has this problem before they fix it, I hope this will help them.

• Envy 5660: HP Envy 5660 Install/HP Utility/This device not supported

  I am trying to install a printer Envy 5660 on my MacBook Pro and I get to the part that says that the HP installation wizard appears automatically after the closure of the facility. I have the GET an error message saying "the device is not supported. Update of the HP utility or use other software HP which aims to support this device can solve the problem. "Where should I go from here?

  Hi @sul824,

  I see you are having problems installing the printer on Yosemite. I want to help you.

  Yosemite drivers are installed by the Apple updates, drivers online are available only up to 10.9.

  Connect the printer to the Mac through a USB connection and run updates Apple.

  Run the printer Wireless Setup Assistant, and then add the new network printer in the printers and Scanners.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If there is anything else I can help you, let me know. Thank you.

• device not supported wireless network found

  Hi guys,.

  I had to change the motherboard of my DV9420US; I bought a new motherboard megabyte Trading, wore the same (444002-001) and told me it was a piece of HP. However, after replacing the technician, the following error appears when starting, and forces me to close:

  "wireless network device 104 undetected." System stopped. remove device and restart.

  Can someone tell me how to solve this problem?

  It begins to be disappointing: I've already spent over $ 400 to repair the original motherboard first and buy a new one, so that my laptop does not work yet.

  Thank you.

  simone73

  Kesli,

  I followed your instructions and it did work.

  The wireless signal is abnormally low compared to what it was, but the problem is solved.

  Thank you very much!!

• Apple USB Super drive not supported error message...!

  Hello.

  MBP 17 "in early 2008, El Capitan 10.11.2...

  Just bought a new drive for Apple USB Super brilliant at my local Apple store there are not 30 minutes.  Came home, plugged in and got the error specified in the JPEG format attached, namely "USB Device not supported.

  The details of the message said "The"Apple SuperDrive USB"is not supported on the Mac."

  Wow, is this true?  Now Apple can't even stand their own material?  USB is supposed to be a standard.  They don't build compatibility USB 2.0 in the last great player...?

  Someone at - it this same problem...?

  Thank you...

  Apple USB SuperDrive requires more power than what is normally allowed for a USB device and therefore is not intended for the Mac comes with internal. If you wish, you can operate in editing a plist in the computer files.

  
  (138201)

• I'll buy 6 s - model No. mkqv2ah/a in qatar. This device will support sri lanka face time? Sri lanka face the time not forbidden.

  I'll buy 6 s - model No. mkqv2ah/a in qatar. This device will support sri lanka face time? Sri lanka face the time not forbidden.

  No, any device purchased from a country where the FaceTime is prohibited or limited to certain carriers can never have Facetime out of that country, or with other companies except those he goes on.

  If you want an iPhone for FaceTime, buy it in a country where it is not prohibited or limited.

  Also, note that iPhone warranty is limited to the country of purchase, so if something haopens to the iPhone that requires a repair of office you will need to consider physically return to the country of purchase.

  Its best to buy the iPhone in the country that you intend to use.

• Portege R500 - error message "sound device is not supported" THotkey

  Hello

  Whenever I have start up my Portege R500 I get THotkey message error "sound device is not supported. \
  The same error message repeats when I touch the volume icon. There is also no sound.

  Any idea what causes this? I have tried to uninstall and reinstall the driver most that can affect the shortcut key and the sound.

  Thank you

  Nico

  Is it Vista or XP?

  Have you installed Windows yourself or it was preinstalled?

  Maybe the wrong driver was installed (of another model for example).

• One or more devices do not support multi-equipment tasks.

  Hello

  I work with 2 X USB series Renault (6356 USB).  I am acquiring data analog voltage of all 8 channels on the two Renault (total up to 16 analog inputs).  I need data acquisition to synchronize and trigger from an external digital source (a signal that I currently wired in A PFI0 of Dev).  I use a sampling frequency of 800 kHz and a 400 kS buffer size.

  I tried to use an express vi for two devices; two separate express vis for each device; and recently changed to DAQmx icons (as seen in the attachment).  Anyway, I get an error (error-201426: one or more devices do not support multi-equipment tasks.).  He referred then DevA and DevB as devices that do not support tasks.  I was under the impression that tasks multi-equipment agree with property X of the series.  I use NI-DAQmx 9.5.5.

  In the attached photo, I left most while loop.  The part of the diagram that I left out is just for viewing and recording of data, I've included parts, I felt it necessary to describe my problem.

  I would appreciate all the advice really.

  Thank you

  Leslie

  I think crossrulz is right. No worries, as they must be in separate tasks, your data is always synchronized as you want. You'll just have to do some things in the software, because not all the data will be returned in the same Bay of waveforms. What you can do is to create two tasks (one for each device), build an array of tasks, and when you do a reading, do it inside a loop for. concatenate the waveforms of each reading and you have a table of waveforms with all your data as if you read it in a single task. You also need to configure your second task to trigger the DevB/PFI0 and divide your trigger wire, he PFI0 wiring on each device.

• niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

  Hi all!

  I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

  Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

  I also downloaded example c# measure DC Voltsto compare with my request.

  Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

  DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

  I guess it is function of device PXI!

  I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

  NOR-DAQmx 8.9.5

  NOR-DMM 3.0.1

  NI-VISA 4.6.1

  NOR-MAX 4.6.2f1

  Roberto

  Hello Robson,

  Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

  KB 33A96PCW: receive error-1074118656 when running OR DMM screws

  Let me know if this might help.

  Best regards.

• Calibration error SMU-4141 niDCpower version 1.8, "calibration function is not supported by the device."

  Dear Sir.

  Nice to meet you.

  When I run the SMU-4141 "Adjust voltage Leve.vi niDCPower Cal" calibration function niDCpower version 1.8.

  It shows an error "function of calibration is not supported by the device." (false cae)

  But if I run the calibration function SMU-4141 "niDCPower Cal Adjust voltage Measurement.vi", (real deal)

  It will work.

  See attachments.

  My equipment list:

  Windows XP SP3

  LabVIEW 2011

  niDMM 3.0.5

  niDCpower 1.8

  PXI-1073 case with 2 cards.

  SLOT2: SMU-4141

  slot6: PXI-4071

  Could someone tell me the solution?

  Hi Peter,.

  The calibration process indicates that the call of the function of voltage adjust NI - DCPower Cal calibrates both the output level of the device as well as the ability to measure of the device.  It is even for the Cal of NOR-DCPower function adjust a current measurement.

  You must perform a calibration automatic on the device prior to the initial audit of the device, before the adjustment process and before the final verification process.

  I'm not sure I understand your question very well.  Please let me know if I have not responded sufficiently.

• Devices of simulations not support value 'ReadRelativeTo' to 'MostRecentSample '?

  I use a device to simulate in my proposed acquisition of analog signal, and when I try to set the property 'ReadRelativeTo' of the workflow to "MostRecentSample", it throws an error saying that I can't use "CurrentReadPosition".  This happens with a simulation PCIe-6320 and PCI-6034.  I used this value with PCI-6034 real cards before, so the device should support, right?  Is this a bug or I do something wrong?

  Here are my c# code:

  Task daqTask = new Task();
  daqTask.AIChannels.CreateVoltageChannel ("dev2 / ai0:5", String.Empty, AITerminalConfiguration.Differential, -10, + 10, AIVoltageUnits.Volts);
  daqTask.Stream.ReadRelativeTo = ReadRelativeTo.MostRecentSample;
  daqTask.Stream.ReadOffset = - 1;
  daqTask.Start (); / * Exception occurs here. */

  And here is the full text of the exception:

  Requested value is not supported for this property value.

  Property: NationalInstruments.DAQmx.DaqStream.ReadRelativeTo
  You asked: NationalInstruments.DAQmx.ReadRelativeTo.MostRecentSample
  You can select: NationalInstruments.DAQmx.ReadRelativeTo.CurrentReadPosition

  Task name: _unnamedTask<0>

  State code:-200077

  Urgh.  I == fool.  I was not put the sample clock before attempting to start the task.  Problem solved.

• EtherCAT: "found a module not supported on the slave device"?

  Hello

  I have a CompactRIO system that uses of slave hunts EtherCAT (cRIO-9081 + cRIO-9144) when I tried to deploy my settings, I got this message:

  Found a module not supported on the device slave address 0: 32445 slot

  What does that mean? (I have several slaves Garland, but of course, I don't have that many slot machines!) The chassis that has been reported with a red exclamation point contains these modules:

  • NI9201
  
  
  • NI9203
  
  
  • NI9265
  
  
  • NI9421
  
  
  • NI9481

  Is one of them unsupported on EtherCAT? If so, is there a list of modules taken into charge/no supported somewhere?

  Thank you!

  Hey there,

  I think you'd find this knowledge base, http://digital.ni.com/public.nsf/allkb/CA3A1D2166A4591386257514007A0F9C?OpenDocument , useful. It would be better to check what version of DAQmx you use and check the readme associated for compatibility or verify this DeveloperZone, http://www.ni.com/white-paper/10462/en. I hope this helps.

• NI-VISA 5.3 driver Wizard does not support USB 3.0 devices

  Hi all

  It seems that NI-VISA 5.3 does not support USB 3.0 devices. When I try to use the driver Wizard to create a driver for a USB 3.0 device, I get the error "ERROR-1073807178: device descriptor error - value not valid bMaxPacketSize0 (must be set to 8, 16, 32, or 64 bytes). I noticed that the unit has been giving wMaxPacketSize0 of 512 (2 ^ 9). But the driver Wizard treats the value 9. So I think that Assistant driver does not support USB 3.0 devices. If someone could confirm this?

  Thank you very much in advance!

  Jackie

  Hello Jackie,.

  Unfortunately, USB 3.0 is not officially supported in VISA 5.3 when you use VISA Driver Wizard.

  A non-official solution is to work around the "information in the descriptor' by selecting 'Other' in the list of devices. You will need to manually enter the 'USB manufacturer ID (vendor ID)' and 'type USB (Product ID) Code. You will then need to find your driver in Windows Device Manager, right click and select "update driver software". This, however, is not a workaround solution guaranteed as NI-VISA 5.3 is not officially compatible USB 3.0.

• Blu Ray error "Mediasmart DVD does not support playback of Blu - Ray disc on a virtual device"

  Blu - Ray has suddenly stopped playing Blu-Rays, with the error message "Mediasmart DVD does not support playback of Blu - Ray disc on a virtual device. A Blu - Ray disc must be inserted into a BD - ROM drive for reading. »

  I don't think it's a hardware problem. And I did nothing, it just happened by itself. Help, please.

  Thank you.

  HP PAVILION XX209AV

  Thomas Pellegrino

  Hi RowlandShaw,

  I saw your post and I'll be happy to help you. You receive the correct Mediasmart DVD error message? What is your product number?

  Find your product on a desktop computer number:

  http://support.HP.com/us-en/document/bph07555

  Find your product on a laptop number:

  http://support.HP.com/us-en/document/c00033108

  Thank you