device not supported wireless network found

Similar Questions

• Re: Satellite C660 - 29G does not detect wireless networks

  Hello.

  I own a SATELLITE C660 - 29 G PSC1LE, bought in Spain.

  Once shaped my development pc, I installed Windosws 7 64-bit.

  As I lost the DVD attached to the purchase of the laptop, I have downloaded all the drivers for my model based on the Toshiba site

  I installed all the drivers and the thing is that the wireless card is most recognized. I can´t see WiFi available.

  I connect to the laptop with a cable to get access to the internet and it works properly.

  Could you please help me?
  Thank you.

  You can first test what is the status of the WLAN card in Device Manager?
  Wireless network adapter installed and registered correctly?

  If yes do not forget the wireless network card is enabled.
  Please check and post comments.

• Tecra M5 Management Console download says device not supported

  Version 3.5 of the management console says device not supported when I try to install? Yet, it was on the computer in the folder of the Toshiba driver and is even available on download for my Tecra M5 PTM50E model.

  Help please?

  Hello

  As suggested in your other discussions on the update of the BIOS, you must install common in order to install the other tools Toshiba and utility Modules.
  The common Modules is an essential component of Windows systems and it is necessary to other original programs for TOSHIBA to work properly.

  Welcome them

• Satellite Pro P300-1AY does not see wireless networks

  I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
  I replaced my card and it does not solve the issue.

  I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.

  I use win XP. Any idea?

  Hello

  You have the latest version of the BIOS?
  If this isn't the case, then you should first update the BIOS!

  The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
  As far as I know, you must use 2.5 or later version BIOS.

  Check it!

• audio device not supported Mac 6.1

  I just spent some time on telephone support to adobe tent to solve a problem, but only had a half fix.  I get an error of an audio device not supported on my Mac 6.1.  Nothing would in return play, I tried several fixes online, switching equipment, etc., but he was always pushing an error in audio device not supported (using audio devices in the Mac).  The problem was bypassed, then when we were able to create a global audio device that uses a webcam logitech for a microphone input and audio built-in for output.  Now I was getting sound and the guy said that the problem has been completely resolved and I'm good to go.  So I start to play my audio to the rear, and while it does not play back audio, he locked not able to go up to 44.1 Khz or 48 kHz 16 kHz.  Once I tried to remove the logitech camera is a no go once again.

  Everyone knows about this problem with the latest OSx and CC2015 Premiere Pro?  Is there a solution?  Also, we went in the Library preferences and renamed the 9.0 folder so that it created a new file, preferably without success on PR. (although it has fixed hearing).

  Tried with bars and tone as well as with images.

  Thanks in advance!

  To be more precise, it gave the following error:

  "The device settings could not be applied because the following error occurred:

  The sampling frequency is not supported by the current audio device.

  The last valid device settings will be used.

  SOLUTION

  I just removed my Logitech camera on the computer, and all of a sudden, it works like a charm...  Clogged again and it wouldn't work... unplugged it and it worked again. It seems that if no input is available, output cannot exceed the rate of sample entries (perhaps because of the recording VO feature?  Whatever it is, that fixed it.  If anyone has this problem before they fix it, I hope this will help them.

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

• 104-pick-up in charge of wireless network found. System stopped. Remove the device and start.

  Hi, I use a laptop dv4-1502tu. I installed windows 8 and everything was going well until I used a TP-LINK, no model No TD-W8151N Wireless N Modem Router.At ADLS2 initially, it worked but suddenly one day, it displays the wireless network device not 104 detected error message. And I'm stuck on this screen since then. I googled for solutions but none was useful but wanted to try the bios flash. Kindly help me with the situation well it would be generous of you if you could give all the possible ways to fix the same.
  

  Thank you!

  Hello zbskism.

  Try to remove the wireless card and reinstall it.  Let me know if the error persists.

  Have a great day.

• Satellite L500-13z - Windows 7 does not recognize wireless network adapter

  Hello

  The Windows 7 RC Device Manager does not recognize my wireless network adapter (for example: Atheros, Intel or Realtek). I tried to install all the Toshiba support drivers, but none of them work:

  After installation, they ask me to connect the unit to my computer (of course it is still on the motherboard!).

  =>, Is there a way to know what is my Wifi adapter?

  that one failed: http://aps2.toshiba-tro.de/kb0/HTD7201PO000SR01.htm (this is the only Word to say "network adapter" with a yellow exclamation point).

  -Online someone knows when will be released Windows 7 drivers on the website?

  Hello

  Before you begin to install all drivers WLAN you can find on the Toshiba site you must make sure that wireless network card, you have exactly. You can check in the Device Manager-online properties-online Details of the local network adapter device.
  Need you an information like PCI\VEN_XXXX & DEV_XXXX

  If you have based this information you are looking for with these terms on this site in order to determine the exact WLAN card:
  http://www.PCIDatabase.com/

  After that, you can download the driver appropriate for your laptop. Before installing, you must uninstall all other versions and restart the laptop.
  Also, make sure that the WIFI is enabled with the hardware switch and FN + F8.

  Welcome them

• Envy 5660: HP Envy 5660 Install/HP Utility/This device not supported

  I am trying to install a printer Envy 5660 on my MacBook Pro and I get to the part that says that the HP installation wizard appears automatically after the closure of the facility. I have the GET an error message saying "the device is not supported. Update of the HP utility or use other software HP which aims to support this device can solve the problem. "Where should I go from here?

  Hi @sul824,

  I see you are having problems installing the printer on Yosemite. I want to help you.

  Yosemite drivers are installed by the Apple updates, drivers online are available only up to 10.9.

  Connect the printer to the Mac through a USB connection and run updates Apple.

  Run the printer Wireless Setup Assistant, and then add the new network printer in the printers and Scanners.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If there is anything else I can help you, let me know. Thank you.

• Not finding wireless networks

  Hello, I recently updated my motherboard due to hardware failure now pci wireless card cannot find any wireless networks and will seek not even networks.

  I tried the older drivers, change the pci slot and I tried to configure the network manually, but when I try it it says "an unexpected error has occuered" and it's all no other options.

  So I got a usb wireless adapter and installed and the same thing happens, it will not look and can not have all networks.

  I ran the scan of the windows files and it reports no errors

  Any suggestions would be helpful

  Hi Cannonballgum,

  1. is the wireless card detected by Windows?

  First check if the wireless card is detected by windows.

  1. Open Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If you see the card wireless available in the Device Manager, then visit the card manufacturer site download and install the update to the latest driver control if it works.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP c309g not finding wireless networks

  Hello

  I bought a HP Photosmart Premium all-in-one c309g (the one I have is the second than the first had the same problem and I sent a replacement, but now I wonder if I could possibly have two defective models in a row?)

  Anyway, my router is an Orange Livebox (Inventel), running from the v5.10.7-uk. firmware I know the SSID and the key, but the problem I have is that when you run the Wireless Setup Wizard, it just sits there on "search... wireless routers "(the progress bar is moving, so I guess it's actually by train). So, my first thought before was that he could not be a problem with my router, as the printer was not picking up six other my laptop WLAN captures in my front room. However, I checked and all wireless networks I see on my laptop is networks 802.11 g, which led me to my next thought...

  ... is the printer using a wireless adapter 802.11n? The livebox I have is that 802. 11b / g (I think, not surprisingly Orange documentation is terrible and I can't find the information out in the admin pages - choose this place on the web, but it could just be 'b'). However, shouldn't the "n" adapter still be able to pick up the networks 'g' (part of the standard?)

  Any help would be appreciated, I can't believe that I have two defective devices in a row!

  See you soon,.

  TK

  I was wrong - I've got it finally works! Nothing to do with my router at all!

  Basically, I connected the printer on a wired connection and traveled to the web interface. There, I found some additional configuration settings that were not available through the USB connection or on the LCD of the device interface. Specifically, in the "wireless (802.11) Interface' layout (http://printerIPindex.htm? cat = network & page = wirelessAdv), on the"Advanced"tab, there is a checkbox that allows the radio operate in mode 'b' (in an infrastructure network use 802. 11b behavior.) I enabled the wireless radio, checked this box, you click on 'Apply' and then disconnected the ethernet cable and hey-presto, a printer wireless to work! I can now browse all settings that are documented, and it is connected.

  If anyone who works for HP is reading this, maybe an update of the documentation (paper and online) to discuss this feature 'Advanced' allow compatibility 'b' with a "n" radio would be very useful for millions of us who have not bought a "n" router yet

  Thanks again for the contributions.

• JournE Air 801 not finding Wireless Networks

  My 801 Air could see my wireless network when I first turned on. I had trouble getting security WPA2 to work so I reset the default 801 by using the reset on the device.

  Now I am unable to find wireless networks.

  Any ideas how I can get my 801 on wireless networks?

  Thanks for your help/advice.

  Hello

  Are you sure that the Wifi is enabled in the settings of Air 801?
  Usually the WiFi icon should be visible in the upper left corner, if the WiFi network has been activated.

  I downloaded the manual for Air 801 (European Toshiba page-> support) and download-> user manual. On page 42, you will find all the details on the networks.

  You can use the Wifi protected Setup. It is the best way to connect to the network.
  -Select Wifi protected setup and press OK
  -Press the wps button on your router wlan and press ok to continue
  -Press exit to return to the previous page.

  Then use the Wifi Wizard to detect and connect to the WLan router in your region.
  -wifi select Assistant
  -Press on top and down to select your preferred router
  -Press OK to confirm your selection
  -Enter the password router e

  You can also use the advanced configuration
  To do this, check the user manual!

• Satellite M40X-149 does not have wireless network

  Hi All/person

  I have a Tosh satellite M40X - 149. My problem is with the wireless operation. For about a year I used it then no problem recently the wireless from strange behavior - I would like to be connected and then she just stop and say wireless network not found then more recently the laptop has not yet locate the wireless network.

  I use a Belkin F5D7633-4 wireless router and when I update the calld their Helpline, they helped me to install the firmware for the router that has seemed to work for about 10 minutes and then the problems started to come back. They recommended that I update my card drivers - can someone tell me what it is and how I do my laptop. I am desperate to solve this, because I'm having to use the yellow cable between the router and the laptop just for surfing the net.

  Can someone help me?

  Thank you
  Mark

  Hello

  If there is no possibility try test your WLAN functionality with another network wireless (friend or maybe in your company). On this path, you should be sure if the problem occurs only with your WLAN.

  Try to install the driver for your WIRELESS Intel network card. You can find it under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1847&lang=eng

• Airport extreme will reconnect not extended wireless network

  The power to my Airport Express (2nd version; 802.11n) has been inadvertently disconnected and it does not now restore for extended wireless network.  I have an Airport Extreme (802.11ac) that hosts the network.  I have soft, hard, and factory resets to the Express.  Airport utility says that an "unexpected error occurred, try again."  I have, over and over again.  Airport utility finds the Express after a reset.  After initial connect failure, I brought the two devices in the same room.  Should I reset the extreme as well and start over?  V10.11.3 OS X, v. 6.3.6 Airport utility.  Thanks for your help.

  At this point, I would say that you make the Express in the same room as the extreme. Go ahead and perform a reset on the only default Express. Wait for it to finish.

  You should now be able to 'see' the Express in the list menu drop-down airport the two OS X menu bar and on your Mac AirPort Utility. In the menu bar is should appear as something like Apple network NNNNNN. It should appear as a Terminal AirPort Express, AirPort Utility.

  If you get the message "unexpected error", check the following on your Mac:

  • Make sure that IPv6 is configured for: link-local only. You can find this setting in system preferences > network > advanced > Ethernet or Wi - Fi (according to your Mac is connected to the network) > configure IPv6
  • If your Mac is connected to the extreme by Ethernet, activate the Wi - Fi connector in system preferences > network

• Why Satellite L300-10 q does not recognize wireless network

  This new laptop works well on a wired LAN but does not recognize a wireless local area network. Received the message no network found. In the same room with another PC laptop Toshiba the wireless LAN is located and has good signal strength.
  The wireless LAN switch is on and the 'antenna' pictogram led burns red.

  Seems that it is not configured for detection. No idea how to solve this problem?

  Hello

  You´re sure you checked all THE settings? I mean, if the local wired network works and the wireless is enabled, you need to check all the parameters available that could be done. One idea would be to check the L300 on another access point to make sure that the problem persists on different brands of wireless routers.

  Please check this first and make sure that your settings are all on "automatic" so if you do not find the reason, come back and we will try to find another solution.

  Welcome them