Device of the HP DV6 - 3010ax HDMI disappears

Similar Questions

• My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it

  Original title: HDMI sound

  I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!

  Hello

  System Restore does not have this long period of time.

  You may want to refer to the suggestions in the thread below link and check.

  No sound via HDMI output portable computer connecting to TV

  I hope this helps.

• No Signal from my computer to the TV with an HDMI cable

  Hi, I have a Pavilion dv6 with operating system windows 7. the cable works with my friends on tv computer but not mine on television.

  Hi Zack1,

  Try this to see if it helps.  Download the Chipset driver and the graphics driver on the links below and save the installation on your desktop programs.

  Chipset

  Graphics driver

  Then, in Device Manager, open graphics cards, right-click on the graphic chip Intel and select Properties.  Click the driver tab, and then select uninstall.  Once completed, do the same for the for the Intel High Definition Audio Codec under his video and game controllers.

  Return to the desktop and install the driver from the Chipset, then the graphics driver.  When finished, restart the PC and see if that helped.  Check in that both Device Manager the Intel graphics card and Intel Hi Definition Audio codec have reinstalled successfully, and if you see now the Audio HDMI option under the playback (found in Control Panel, sounds) devices, as demonstrated by the top option on the screenshot below (ignore the fact that it is ATI ", I just said the TV icon option).

  http://S175.Photobucket.com/albums/W146/rproffitt2000/?action=view¤t=7Speakers.PNG&newest=1

  If it appears correctly, try the HDMI connection and see if it works now correctly.

  Best wishes

  DP - K

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• Missing audio device of the control panel.

  Several days ago, I opened the control panel to troubleshoot an audio device. The Control Panel showed two audio devices:

  1: ATI PNP
  HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1001\5 & B0AB116 & 0 & 0001
  Driver c:\windows\system32\drivers\atihdmi.sys (7.11.0.7703, 114,00 KB (116 736 bytes), 02/09/2010 12:34 AM)
  2: REALTEK PNP
  HDAUDIO\FUNC_01 & VEN_10EC & DEV_0888 & SUBSYS_103C2A92 & REV_1002\4 & 19 19054 & 0 & 0001 c
  Driver c:\windows\system32\drivers\rtkvhd64.sys (6.0.1.6196, 2.37 MB (2 484 072 bytes), 07/09/2010 12:27)

  Both devices are still listed under system information/system/components tools, but:

  At some point during the configuration of the device from Realtek, ATI device disappeared from the control panel. Since then, I have found no way to adjust its properties, much less put on the control panel.

  The only other change observed: formerly the computer sounds internal (startup, error, stop, etc.) remained internal. Now, I can hear them through the external speakers - acceptable but not optimal.

  Any help would be appreciated.

  Milt

  Hello

  Could you post back with the full or part no of your PC model No.  Also, could you confirm the operating system you are using.

  Another thing to check is in the meantime.  Windows Control Panel, open Sound, right-click in an empty area of this window and check "Show disconnected devices" as «Show disabled Devices»  Another thing now appear?

  Kind regards

  DP - K

• Base system device drivers? CD-ROM/DVD-rom disappears - was not found.

  Why is it so hard to find a solution for this?

  Don't know what happened. The next thing I know - I don't have a CD/DVD-rom - that works - it disappears from the list of device - and "Base system device" Manager in his place with an exclamation point with it... with 3-4 other items in the list no longer works. ??? Currently, there are 2 basic system devices in device with the exclamation points Manager and no idea pilot to remedy?

  (1) feature of system - hardware ID value base:

  PCI\VEN_0180 & DEV_0843 & SUBSYS_30EA003C & REV_12

  PCI\VEN_0180 & DEV_0843 & SUBSYS_30EA003C

  PCI\VEN_0180 & DEV_0843 & CC_088000

  PCI\VEN_0180 & DEV_0843 & CC_0880

  (2) system base of the unit-

  PCI\VEN_0180 & DEV_0852 & SUBSYS_30EA003C & REV_12

  PCI\VEN_0180 & DEV_0852 & SUBSYS_30EA003C

  PCI\VEN_0180 & DEV_0852 & CC_088000

  PCI\VEN_0180 & DEV_0852 & CC_0880

  (3) Standard SD compatible SDA host controller

  PCI\VEN_0180 & DEV_0822 & SUBSYS_30EA003C & REV_12

  PCI\VEN_0180 & DEV_0822 & CC_0805OO

  PCI\VEN_0180 & DEV_0822 & CC_0805

  The other 2 are network cards.

  Can someone help me with this? I would be so grateful! Thank you.

  Hello:

  The only driver I know who installed the base system devices is this one.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-58981-1&cc=us&DLC=en&LC=en&OS=2093&product=3636382&sw_lang=

  Looks like the motherboard is endangered.  Very common with this model.

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Playback devices does not recognize an output HDMI for sound!

  I have my HDMI connected with video but my output of sounds/audio/playbackdevices does not recognize that I have a connected TV, how do audio? theres no monitor to set as audio device by default!

  Normally, HDMI carries audio as well as video, so choose HDMI as the included default playback device work. If you don't see a HDMI, try:

  Click on:

  Start-> Control Panel-> Sound > tab reading .

  Now right click on an empty area and make sure that see the disabled devices and see the disconnected devices are enabled (checked). If your playback device (HDMI) appears, right-click on it and select enable. Now, right click on them again and select set as default device.

  If the above does not try to install the latest package of graphics driver that they usually contain the necessary audio drivers for output over HDMI.

  You can also check that your graphics card is capable of audio over HDMI output as some may not.

• Problem blackBerry Contacts application launch Smartphones and tasks after update of the device on the air.

  Hello

  I have problem launching Contacts and applications Taksks on my BB Bold 9900 after OS updated on-air 7.1 Bundle 2508 (v7.1.0.912, platform 5.1.0.641).

  The Contacts app is crash after trying to launch it's and not display anything (previous armored content is displayed). I have to press to close the application and return to the screen notrmal.

  The tasks app isn't launched and display error message: Eception exception: context of entry has a component of input null - apparentely focusGained has not been called by UiEngine.

  It's not disappear, even I reboot the device, remove the battery or wipe it.

  Can someone help me?

  Kind regards
  Artyom.

  HM, if I try to start tasks app with English as the language of current entry - this app has started without problem. Current developments in Russian language - prevent to start this application. Also if I delete files from Russian support of device using desktop - contacts and tasks soft application works ok without problem. May there are Russian software bug in support files.

• BlackBerry Z10 Z10 "Please wait while your device is the software update and restart"

  Sorry if this question has been asked elsewhere but I searched and could not find an answer the applies to my particular situation.

  I have a Z10 on Bell who got an automatic update this morning (I have no note of my operating system version number or the version that I was updating to) and the phone is locked to the prompt "Please wait while your device is the software update and restart."  Update messages said it would take a lot of time and that I should connect my phone if it was less than 20% of battery.

  The Bell's Web site indicates that the version of the software is 10.3.2.2168 and the latest version of the OS is 10.3.2.2252.  I don't know how many times this site is updated, but I guess that's the version that I am trying to update?

  (http://support.bell.ca/Mobility/Smartphones_and_mobile_internet/Operating-Systems?alias=BlackBerry-Z...)

  The phone is not fixed... I can see messages turn on the lock screen and interact with the phone to get a glimpse of these messages, but if I try to unlock the phone, the message block appears above any function, I tried to launch (whether a text message, the camera, an email, etc) and I can't interact with the phone at that time otherwise than to lock again and open the lock screen up.

  At the time wherever I drag, the prompt.

  The prompt on the phone for about 6 hours now.  The battery was full this morning and had exhausted 70%, but I've since plugged.

  I have not tried a batt pull because I'm afraid of the consequences of this action after the launch of the update.

  Everyone knows this and had the phoen back? I know that 6 hours is well past any reasonable wait times in my books and was strongly tempted to restart the device... but is there here experts who recommended that I continue to wait?

  I forgot to mention that the power button was still working to give the ability to power off the unit.

  In the end, I couldn't wait any longer.  I put off the device "no risk" with the power button, rather than using the battery pull method.  I turned on the camera back later and the blackberry logo appeared.  The screen faded faded black and no lights appeared on the phone.

  I could hit to swipe down to get the blackberry logo to return to the screen, but no startup loading progress screen never wouldn't come.

  I could never get to the home screen, but the phone was actually 'ON' below.  I could call the phone and it should sound, but there is no visual indication that the phone was working and there was no way to respond.  Sliding down to unlock simply revealed the word "blackberry" in the middle of the screen.

  I did a Batt pull and this time, the logo appeared as before, but disappeared forever... and then the progress of boot screen appear.

  The words 'from 10 Blackberry OS' were visible on the bottom and rotate it beween this and "install updates".

  Start-up took a LOT of time (15-20 minutes?) but after that, everything was fine.

  Displayed software update version information and it is indeed updated to 10.3.2.2168.

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• Digital persona not to find the device of the fingerprints of validity

  Hello, I have a Dell laptop with Windows 7 Professional and a validity vfs300 fingerprint sensor.

  In Device Manager, the biometric device displays fine without problems in the form 'Validity Sensor.

  (driver version number 2.1.0.2)

  My problem is:

  I have DigitalPersona Personal Software updated to version 4.11.3825

  (the most common starting from 04/05/10) and it will not detect the validity sensor.

  Also, the choice of the biometric device under the Control Panel does not exist.

  Honestly, I wouldn't even need DigitalPersona if Validity Sensor was able to appear in Control Panel of Windows 7, but I can say that this new feature is half baked.  I guess it's bad drivers.

  I need help. Thank you.

  After many days a lot of work, I finally found the solution for VFS301 of a validity sensor works with Digital Persona on Win 7 64 bit because it is supposed to.

  NOT the drivers INSTALL WBF all sites or drivermax... These drivers allow only logging in Win7 and no website, sign in.

  (1) first of all UNINSTALL all software and the DDK (Driver validity)...

  Make sure that also go to the control panel =>-online Validity Sensor Device Manager

  UNINSTALL the sensor and check "erase the software driver for this device.

  (2) then make sure you REBOOT

  (3) DOWNLOAD and install validity of HP drivers

  FTP://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48509.exe

  (4) REBOOT AGAIN... it is important

  (5) Download Digital Persona worm 4.11.3805 the link below

  http://d11tvxmfjhi64o.CloudFront.net/x64/Setup.exe

  (This file is taken from)

  http://Forum.NotebookReview.com/HP-Compaq-Voodoo-PC/404164-drivers-HP-DV6-Gen-2-dv7-Gen-3-DV8-HDX16-HDX18-Intel.html)

  (6) RUN the Setup.exe

  When it asks to install the driver for the fingerprint reader (the first dialog box you get when you run setup.exe)

  DO NOT click on INSTALL

  Let the installation window because it is...

  (7) open the Explorer windows by pressing win + E

  8) go to

  \AppData\Local\Temp\username C:\Users\

  Click the "Update" column to sort the latest updated files first in the list

  You will have a folder with {05B54AFA-28C6-4FED-A0E6-3F235641DA1D }<============= example="" only="" it="" will="" be="" different="" on="" your="">

  Go to the folder and you will see some ini files with a file named 'drivers.prq fingerprint reader.

  Open "fingerprint reader drivers.prq" in notepad.exe

  Delete all lines of text in the file 'fingerprint reader drivers.prq' and save the empty file.

  (9) back to the Digital Persona installation dialog box referred to in point 6

  Now, click on INSTALL and let it install the software

  He will open the same file again and continue with the installation...

  When it asks to RESTART, click YES

  (10) after the REBOOT, the fingerprint reader works without a hitch.

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• The mouse keeps freezing and disappear in Windows 8

  I got a new computer for Christmas, I started with a HP with windows 8 and took it back because the mouse could freeze or disappear, so I exchanged it for a Toshiba and it does the same thing! How can I stop it?

  Anyone with this problem, the tab using the arrow keys or commands to navigate. Reach:

  Control Panel; devices; mouse; device settings (maybe a small red symbol); and make sure that your touchpad is enabled by pressing on enter, then go to buttons, check the drop-down list with your touchpad. It should be the only one other than "other pointing devices.

  I hope this helped PS :): it could freeze a little every now and then depending on your computer, but his practice

• Connection in the process of re-emergence/disappearance-limited Qualcomm Atheros AR9485 Driver

  I have googled and looked in the forums of microsoft for 4 hours in the last few days without solving this problem.

  Card WiFi of my asus laptop is in the title.  Constantly, he disappears from the Device Manager page and will reappear at random.  When he comes back, and I'm trying to connect to the internet, it is momentarily but then goes limited and then disappears if I disconnect my wifi network.  According to me, it says Code 12 is the limiting factor, and after looking around, I have not found a solution here either.

  

  I've removed, reinstalled, disabled and re-enabled the pilot.

  I deleted the ethernet driver and reinstalled that as well.

  I tried all of the solutions that has developed on google (there were 5 or 6 different things, I don't remember...)

  The update of windows alone is KB3000850 - 700 + MB.  I tried to download this 4 times and it never goes from 0% defect free.  I'm not sure that this is my problem because I had wifi sporatically last week and yesterday my wifi worked for 5 hours.  He only stopped when I decided to start my homework online (lucky me).

  I'm certainly not to post on the forums to help because I will more than likely find a solution online first, but it has left speechless me and I can't really afford to let this problem persists longer.

  Thank you

  Scott

  It turns out that the chip atheros in my laptop is fried.  I guess it is to walk in and out of the school building when it was 0 degrees outside and sometimes leave in the car by this time.  I had a little usb wifi adapter and it works great.  Will look for a better and longer lasting laptop in July.