Device Provisioning with autmatic reboots

Similar Questions

• In the face of "the device associated with this extension or the dial number is not valid" when you use DX80 telepresense phones

  Hi team,

  We have EX and DX series telepresence as endpoints agent. But DX series phones are facing issue "the device associated with this extension or the dial number is not valid" when checking in the agent. EX works very well. Both phones are properly recorded in CUCM.

  Can you please help me out here to solve the problem.

  Thanks in advance,

  Sisi.

  In my case, we tried to do a few different modifications here and there on the DX650 but never managed to do work.  Randomly, I was able to connect to the fineness with the DX650 as my camera, then my colleague could not connect to the Finesse with his 9971 as his camera - (keep in mind this was in an environment of model and it was just her and me as agents).  Since I saw this strange behavior and doesn't do not sense, we rebooted the server CCX. Once she is back to the top, we were also well able to connect successfully and had not had the problem since.

  Thank you

  EK

• Is there a way to manually move photos from my Mac to my iPad and iPhone?   I don't want to use photostream because I don't want to use my memory on my devices moble with my collection of photos together.

  Is there a way to manually move photos from my Mac to my iPad and iPhone?   I don't want to use photostream because I don't want to use my memory on my devices moble with my collection of photos together.

  With iTunes Sync Photo, you can copy the albums selected to your library of Photos of the iPhone or the iPad.

  See: Sync photos to your iPhone, iPad, and iPod touch in iTunes - Apple Support

  But this method is available, if you use not iCloud photo library on your mobile device.

• Does Cisco ACS 1113 v4.2 device work with Windows 2008

  Hello

  I have a wireless currently in production infrastructure. All my Cisco LWAP is managed by Cisco WLC. Authentication is done via RADIUS through my device Cisco ACS 1113 running on version 4.2. The Cisco ACS 1113 device communicates with my Windows 2003 Active Directory. Everything is good now.

  Next month, we plan to update Active Directory from Windows 2003 to Windows 2008? Will be all fine and good, or will it be questions? Please advice kindly.

  I saw another post in this community that the States https://supportforums.cisco.com/thread/1003597?tstart=0. I am now confused. Help, please.

  Kind regards

  RAM

  + 60122918870

  ACS 4.2 does not work with Windows 2008R2.  I had a case of TAC open about this, and basically, they told me that I had to switch to 5.2 ACS.   I've been doing demonstrations there and it authenticates with Windows2008R2 very well.

• My desktop icons will not run after a short period of time, with a reboot.

  My destop icons will not run after a short period of time, with a reboot

  Hello

  When did start to happening?

  You did any changes made to your PC?

  What HP PC model and operating system are you using?

• Too many devices connected with my Adobe ID

  I can't download ebooks on my tablet, because he said that we need to connect on too many appliances. Is it possible that I can see what other devices connected with my Adobe ID?

  Thank you, my Adobe id activation has been reset

  Sent by Samsung Tablet

• Point of "Unknown device" in Device Manager with yellow exclamation point

  I have a VGN-FW170J laptop.  My poster an "unknown device" Device Manager with a yellow exclamation point next to it. indicates that the driver is not installed for this device.  How to solve the problem?  Sony Firmware Extension Parser device driver "" SODFEP-00270203-0083. "." EXE"what to fix this problem, BUT NOT compatible with my computer.  Need a solution

  Hey there GEP170!

  Please provide additional information about your question. This camera is connected to your computer? To check if this feature is one that is being indicated by the Device Manager, you can try to uninstall this device. If this device still appears in Device Manager, it only means it could be another device.

  Please post here, what happens if you uninstall this device.

  Thank you

  ~ Tim

• HELP ASAP! No audio output device installed with hp pavilion dv2500

  product name: hp pavilion dv2000

  Model number: dv2710us

  Product number: 2CE75228LJ

  Windows vista edition Home premium 32-bit

  my hp goes on to say that did not install device to output audio and theres the the image of volume with a large red circle with a white cross in it.

  that's not true because I have contexant (I think that's what it's called) installed speakers.

  Lately when I would restart my computer the sound would work intermittently, but since two days I restart my computer or not the volume with a large circle in red with a white cross image is still there and says no audio output device installed. Help, please!

  Hi, you can try the steps below to solve the problem:
  
  Step 1: Re-install audio drivers HP Recovery Manager.
  1. Click Start, in the start search box, type of recovery. Then click on Recovery Manager.
  2. in the Recovery Manager window that appears, click Next. Software programs Reinstall accompanying your computer screen, click on no, I'd like to see other options. And then click Next.
  3. in the screen of hardware drivers reinstall, click Yes. And then click Next. On the screen to reinstall hardware driver, click Next.
  4. in the list of drivers, select the name of the card its installed on the system. And then click Next. When you are finished, resettlement is the complete screen displays. Click Finish to restart the computer. After the computer starts, test sound. If the problem persists, perform step 2.
  Step 2: Manually reinstall audio drivers
  If there is no sound, and still get this error, update the audio driver from the link below:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-63129-1 & CC = US & DLC = in & LC = on & os = 2093 & Product = 3646848 & sw_lang =
  Step 3: Restart the Windows Audio Service.
  1. Click Start, type services.msc in the search field, and then select services.msc in the list as soon as it is available to open the Programs window.
  2. scroll down to select Windows Audio, do a right click to open the menu drop down and then click Start.
  3. right click on Windows Audio, click Properties and verify that the Startup Type is set to automatic.
  Reboot the laptop and check for the issue.

• Device provisioning model for Ex90 or E20 and does not

  Hello team,

  If I want to use an Ex90 or E20 as a device of commissioning, which parameter are required to configure the XML templates? I basically set up the VCS - C,
  VCS address EI and the source of the phone book. But it does not work or could not saved. I added group and a user with the user name and password to attribute the right model, but no registration. In the commissioning of the EX90 Wizard, I configured the way of VCS with domain and user name password and outside Director but no chance to register. How now the ex90 that he sit outside. On the customer movi I internal and external server, but not in the wizard. OK you can solve externally on the field as a vc. domain.com. but no registration
  Thank you for your ideas

  Sent by Cisco Support technique iPhone App

  Hi Rasim

  User name: {user name of the user commissioning}

  Password: {password for user provisioning}

  Domain: {SIP Domain}

  External Manager: {address VCS}

  / Magnus

• ISE 1.2 - begging CWA provisioning with anchor WLC

  Hi all

  Having a problem with supply begging via CWA on a controller of the anchor. I am able to connect through CWA and authenticate etc no problem, but when the device registration page it says "cannot connect to the network at this moment" - the mac address is filled but the said button try again. Once I click on retry it cycles back to the original comments Portal login page. In the section reports the begging failed provisioning message is "error trying to determine access privileges: failed to get the host name of the session cache."

  I tried the same policy without the anchor (ie the local controller) and it works perfectly. Interestingly enough if I manually register the device then connect first the portal comments, that it allows me to click on register and proceed to the provision of begging. I also tried installing anchor using peap and NSP redirection - this also works perfectly.

  I can confirm beforehand that firewalls, etc. is not a problem with permit IP any one between all parts of work - no blocks without drops etc. Politics is the standard CWA trustsec installation with Enable ticked self-supply. For what it's worth, I am absolutely confident with the config having deployed before - but without a controller of anchor.

  Stephen,

  I have worked with TAC customer account team to find a solution.  The problem is with the WLC anchor and the session not replicated.  I was able to get around by disabling account management radius for the ssid on the controller of the anchor, but when we look at the bug looks like an alternative solution is to disable fast switching ssid, which could cause problems with BYOD worldwide double ssid.  I still do test, but the accounting change seems to have resolved.  Bug ID: CSCui38627

• Citrix Provisioning with Adobe Standard XI

  We are having a problem with Adobe Standard XI. We use Citrix Provisioning 6.1 to provide terminal servers. We changed the image commissioning with a fresh install of Adobe Standard XI. Everyting works well on the server, which we used for the installation. When we attached the new supply of images to other servers, end users who encounter a problem with the license. Users receive an error it must register the license. When we record Adobe at this time, the problem is resolved for that day. After a reboot in the night, we see the problems the next morning because the image is read-only.

  Could someone point us in the right direction to eliminate license message?

  Best regards

  
  Richard

  Can you please try to disable the registration using Customization Wizard dialog before creating the image. Assistant customization will create an installation program that is customized for Acrobat with tombstone. You can then install this generation on the server, create the image commissioning and then attach it to other servers.

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5515

  http://www.Adobe.com/devnet-docs/acrobatetk/tools/Wizard/resources.html

  Thank you

  Vinod

• My iPad is not listed under devices connected with the Apple ID

  My iPad is not listed under devices signed Apple ID I do not know how to add this new iPad

  Where are you seeing this? iCloud.com or on the link below...? Are you connected to iCloud with your Apple ID?

  Apple ID - manage

• Hosting devices USB with my STOR problem. E TV

  I had my STOR. E TV for about 2 years now, and note this problem since I was.

  Problem: when you host a usb (flash or ext hdd) stor.e tv device detects the device and open the USB key. However when I try to play a file, it starts off the coast of the fine, but about a minute in the picture begins to shift making the file impossible to watch.

  I heard from his colleagues to see if there is updated firmware for the tv stor.e as this may help.

  Please if he would, and where would I go to find it?

  Kind regards
  André

  > I heard by his colleagues to see if there is updated firmware for the stor.e tv because it might help.

  There is no firmware available for television Stor.E
  If you go to
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU
  and choose
  -Options
  -Drive devices
  -Multimedia hard drives
  -3.5 store TV
  you won't find any firmware

  But there is a firmware for Stor.E TV +.
  But I put t think its compatibility with the TV StorE

• Satellite M40X-169 when it is connected to the wireless device stop with restarts and blue screen

  Hello.

  I had the problem with my laptop when I connect and get connected to the wireless network. My laptop stops with the Blue error screen, then restarts.

  Maybe you can help me solve this problem, because I can't work normally when I need to be connected.

  Plaese help me.

  Hello

  It is not easy to give you a precise answer, but try to remove WLAN card from Device Manager, and then restart the device. You can also check the Toshiba download page and try to install the latest driver for the WLAN card.

• Can I use 4 apple tv remote to operate the devices homekit with siri?

  I just bought a 4th gen Apple TV and I'm experimenting with everything that can make the Siri to button on the remote control.  I tried to use it to turn my lights on and outside, and I received the message "Sorry, I can't help with HomeKit here."  Am I reason to assume this isn't allowed / supported?  Curious to know why, as the Apple TV also serves as the gateway so that I can control my HomeKt remote devices from my phone (which is currently working).

  Thank you!

  -Jeff

  That is right. Although the ATV4 HomeKit capable Siri on tvOS is not yet supported. My hypothesis is that Siri visibility will increase.  Just as the music was not included until 9.1. I expect more integration through software updates.  That said, being a user forum, and not something I've seen confirmed by Apple...