Device series problems

Similar Questions

• Device driver problems"the operation requires an interactive window station

  Original title: device driver issues "the operation requires an interactive window station.  replaced the bad hard drive on laptop running Vista with Windows 7 HDD.

  I had two toshiba laptops satellite. On one, the hard drive went bad, the other liquid has been spilled, and the keyboard in ruins. The one with the bad hard disk was Windows Vista.  I replaced it with the hard drive of the other computer that uses Windows 7 Home Premium. Initially, it appeared, it would work without a problem, but I device driver problems.  First of all, it is audio and video.  When I updated the driver audio and restarted, Syntec PS / 2 touchpad no longer works. I tried (using the keyboard only) for updating the touchpad driver, but ultimately it fails with the message "the operation requires an interactive window station.  Then I tried to install a USB Microsoft Intellipoint mouse, it seems that the driver will be installed, but I had to use the keyboard to accept the terms and conditions. Then it errors "Setup was unable to install a required component: Microsoft Application Error Reporting." Restart your computer and try running the installer again. If this error occurs again, see the Readme file in help for more information. (Error code 1601).  How can I get my device drivers all working correctly?

  Best option is to reinstall the operating system.

  Also check this:

  This operation requires an interactive window station.
  http://www.TomsHardware.com/Forum/235014-44-this-operation-requires-interactive-window-station

  If the laptop is under warranty, contact Toshiba.

• Problems with USB pnp devices series Tecra

  Hello
  I have a lot of problems to install usb flash drives as pnp devices. It should install automatically as it did on my desktop and other mobile colleagues.

  I am running xp professional and all that happens is the found new hardware wizard appears, and fails to install. I tried to update the BIOS and Chipset with downloads from this site but nothing works. I ran the diagnostics and the usb drivers and features are ok.

  Any help would be appreciated.

  Hello

  Everything you wrote is really mysterious. It will be interesting to know what model Tecra you have exactly, and this occurs when you install the operating system using recovery DVDs delivered.

  I can't really imagine that this issue occurred all of a sudden.

• End of series problems

  I bought the first two episodes (via Apple TV) to see if we would like a particular issue and having liked it, has decided to end the series in the balance reduced rather than buying all the episodes separately. However, the full price of the entire series still appears on the main series page. When I click to buy the series, it is said that I already bought several episodes and asks me to confirm if I want to buy the complete series (from $25) or to complete the series of the reduced rate. When I click on complete series, it just brings back me to the list of episodes and shows the full price - assuming that this must be a problem because it gives the opportunity to complete the series, but don't let me do.  Any way to work around it (tried the switch / turn off and left for a week to catch up)?

  Hello qatn.

  Thanks for posting here in Support of Apple communities. I see in your message that you are trying to use the feature complete my season, but you have problems to make it work the way you would expect. I can certainly understand why you want to take advantage of this discounted price since you have you discovered like this particular show.

  As a first step, I recommend that you try to restart your Apple TV. Take a look at this Web site for more information on how to restart this device:

  How to restart your Apple TV - Apple Support

  If you are still having the same problem after reboot, it may be a good idea to try to complete this purchase using another device. If you have a Mac, PC or iOS device available, you can follow the steps here to finish a season:

  Fill an album, season or bundle

  On your Mac or PC

  On your iPhone, iPad or iPod touch

  On your Mac or PC

  1. Open iTunes.
  2. Go to the iTunes Store.
  3. Depending on what you want to fill, choose music, TV shows, movies or Apps from the upper left corner.
  4. Under quick links on the right side of the window, click on Complete my Album, complete my seasonor complete my Pack. Any eligible albums, seasons TV, movie or app bundles braids appear.
  5. Select the item that you want to fill. Button to purchase the item, you will see a price based on what you have already spent.
  6. Click on buy.

  On your iPhone, iPad or iPod touch

  1. Depending on what you want to fill, go to the app Store in iTunes or the app from the App Store.
  2. Find the album, season or boot you want to fill. Button to purchase the item, you will see a price based on what you have already spent.
  3. Click on buy.

  About complete my Album, finish my season and finish my package - Apple Support

  If you still continue to have similar problems when trying to make your purchase on another device, it may be best to reach out to the iTunes Store Support for assistance with your purchase number. You can do this by using the following Web site:

  Contact iTunes Store support

  Take care!

• Satellite L300 - 1 year PSLBGE - device Modem problem

  Hey

  I try me set up my dial-up access, so I can use internet at home...
  It is said that any modem devices are
  but in the previous copy of windows that I had... everything was fine.
  would u please help me solve this problem?

  Portable computer system unit Toshiba satellite L300 1 year
  Model No.: PSLBGE-002004AR
  OS: Windows XP
  Note: I went on the site of toshiba drivers and I downloaded 3 files of modems here to try to update the modem driver
  but nothing helps and the problem persists
  Thanks for reading
  Your
  ~ Nour

  I guess that you have activated the Device Manager and there is no yellow exclamation point isn't good?
  Figure modem in the list?
  It should be!

  How have you tried to configure the dial-up access?
  You should do this;
  Go to the category modems Options - Control Panel - hardware and sound - and.
  In the local info window, select an area code; for example, 0.
  Then click the Modems tab, click Add.
  If a User Account Control warning window appears, click on continue, and then click Next.
  Now Windows Vista should attempt to detect the modem.
  When the modem installation is complete, click Finish.

  Then the new modem installed should appear. Click OK to close the Options of Modem and telephony.
  Now, your modem is installed correctly, and you must now create a modem connection.

• Satellite Pro m USB devices connection problems

  Hello visitors and insiders.

  can someone help me, please? - or are the causes of the problems of programmed BIOS is not perfect?

  I put on the USB Ports (I tried all 3 Ports) after correct installation of the most recent drivers for devices and the BIOS and chipset.
  I tried MAGIX encoder by USB and PINNACLE for USB encoder - both signal-request-problems and the two could not shut down the system after connecting with USB and close with her current for USB device.

  I tried this on different WinXP installiations (multiboot) - but on all systems even.

  The same reaction has been, as I have connected a special CUSHION cooler for laptop with additional USB Ports.
  The CUSHION cooled - but the USB Ports do not work for all devices (devices I am familiar with the)
  Ports of origin of the laptop, has failed to TRIM, too). (worked directly devices: mouse, webcam, keyboard, drive hard usb)

  What should do? .. If anyone know Somethin ' help... I will be very happy.

  Thank you very much!!! (Sorry for my English is not perfect)

  Ben

  Is what model of laptop exactly?

  Have you installed Windows yourself? Or it was preinstalled?

  Looks like it's a software problem, bad drivers USB can at fault.

  You are able to back up your data and run recovery?

• HP Envy 4500/Series: Cablelink (Austrian cable service) / installation HP Envy 4500 series problem

  Hi, I have a new HP Envy 4500, and it does not connect to my wireless network. He sees the correct SSID (using WPA - PSK / TKIP or AES), but he will not join the network after providing the WPA key. Printing test results shows a FAILURE on > parameters - without filtering. I don't know if I use MAC filtering on the network, because I don't know how to check this on this modem.

  I am also unable to join using the WPS procedure. I tried with and without a USB connection. I have 5 other wireless devices on the network, which all connect without any problems.

  In addition, I put static IP details on the Panel after reading the HP forum where this problem was stated by setting just the IP address and no subnets. Still no connection

  The printer works via USB ok.

  I got it connected to my neighbors A1s wi - fi network.

  I have a new wireless network to cable and modem put cable in the last week connected to Cablelink. I have a new router Cisco EPC3940. I tried to restart, connection to WPS and wireless USB connected. Reset the printer and modem and tried with and without using a static IP address.

  I tried to reconnect to my neighbors A1 connection - success.

  I tried with USB lead-success

  I tried direct to print without wire-success

  I tried to share wireless USB by using HP software-failure

  I tried the HP PC don't doctor too - no available solutions.

  I have read and tried several fixes on the HP forum-no success

  The fault is clearly my printer connect to my cable modem wireless (or my printer connect to my wi - fi of Cablelink) like all other connection works!

  I posted at the end of a similar position, but did not respond. Help please.

  Carl

  I finally solved this problem after 2 weeks of trying everything! Based on the above comment from BH, I thought that I had to turn off my radio show from 5 Hz. My new router has prevented to me because of the way Cablelink run their software. However, I finally got access to change it. I disabled 5 Hz. I still have the invalid password! Then, I changed the predefined WPA WPA2. It worked. I turned on my 5 Hz back show, the printer is remained connected. I then changed back to WPA2 and immediately lost connection! I put it to WPA and it connected again! I did NOT change key wireless, he remained at 16 characters, just the level of security! It seems if I want my Envy NEW 4500 with UPDATE drivers on my wireless network, I have to REDUCE my password security, which comes by default with modems cable new with Cisco, and accept the WPA! The strange thing is my old Iphone 4 and my old Apple TV both connected without problem. Therefore more recent Iphone to my wife 5 c and our newest Samsung UHD TV. So why a NEW model of printer is sold in stores right now, not able to work on WPA2? I lost 2 weeks on this issue before the sort it! It works, but I'm not happy! Same HP UK failed to connect after 4 hours on their online chat and remote assistance online! I worked it out myself from the comment by BH! Thanks BH. HP POST PLEASE A REPLY ON THIS THREAD WHEN YOU FINALLY WRITE A SOFTWARE FOR YOUR PRINTER TO WORK ON WPA2. MAYBE YOU CAN EMAIL CISCO IN ORDER TO WORK OUT HOW TO DO THIS BETWEEN YOU.

• Satellite U300 - 111 - device with problem of code 10

  My cousin has a Satellite U300-111 and she is having the problem of code 10 "this device cannot start.
  It formatted his cell phone, and then the noise disappeared. She tried the soundcard that she found on toshiba.com but nothing seems to work. !

  Could someone find us please a solution coz, she is really give up now?
  Thanks in advance

  Hello

  Your message is not clear
  You said that the laptop has been formatted Ok have you installed all the drivers from Toshiba?

  You must use the European driver of Toshiba page to download driver.
  The laptop seems to belong to the PSU30E. You should choose exactly this model in the form of download number.

  But these drivers are only required if you have installed a clean Windows operating system.
  If you use the Toshiba Recovery CD/DVDs you n t need the drivers because the image already contains the Toshiba drivers.

  Concerning

• Device audio problem / its satellite 2450-101

  My sound has kept silent for while now. I didn't know about the volume control sneaky hidden on the side of my laptop, so I've done all sorts...

  Today, I was so desperate to hear certain sounds (a little knowledge is a dangerous thing) that I played a little... It seems to me have uninstalled audio device - in the Control Panel, windows tells me I have no audio device.

  Obviously, it was a stupid thing to do - how can I remedy this? Download anything from microsoft? Or is it a problem of Toshiba? My manual is no help.

  Thanks in advance

  Charlotte

  Hi Charlotte,.

  You should be able to re - install the audio device from the utilities Toshiba (NOT recovery CD) CD that you received with your laptop.

  HTH

• Hello I (IPAD MINI DEVICE) and problem in my memory I have 12.5 GB, and using less of it and A Nofticate it indicates your size will end soon, or something like that I deleted the apps and that he got 100 MB and after all the Nofticate come back and some

  Hello I Have (IPAD MINI DEVICE) and have problem In My Memory I have 12.5 GB, and using less of it and A Nofticate it indicates your size will end soon, or something like that I deleted the apps and got 100 MB and after all in the Nofticate come back and something has my size and it says Iam using fully 12.5 GB and I amnt Iam using just use it 4 or 5 GB

  Try to provide the exact text of the message you see. "size will end or something" identifies not enough information for anyone to be able to solve the problems.

  In addition, check if reference is made to the size on the device, called space iCloud.

• Re: Satellite C660-1CH - device wireless problem

  Hello guys

  I just got my Toshiba Satellite C660 and I have the problem with the wireless device I can't access it. When I press FN + F8 nothing happened. I downloaded from http://aps2.toshiba-tro.de/wlan/?page=downloads Atheros Wireless LAN Adapter - windows 7 x 64, but it does not work.

  NOTE: I have problem with blutooth device also.
  image manager adapter: http://www.9ower.com/uploads/9ower.com9ea213036644581.png

  Hi Wolvrine,

  Exactly, what problem you have with your wireless network card? It is disabled and if you try to activate using the FN + F8 key combination? Or you have another problem?
  Did you test if other FN keys work correctly?

  On other threads, I realized the C660 owners are disabled the Windows power management feature and it worked WLAN energy saving. Maybe it s works for you also.

  Regarding Bluetooth: Satellite C660-1CH is not equipped with Bluetooth

• HP Pavilion g series: problem with correction of the graphics card Administration says computer not connected, but it is

  PC questions message says: problem with SMA-Display adapt ATI Rodeon graphics cards.

  Click fix, it can not download the probable cause of the fix is pc is not connected to the internet, but I am.

  How can I fix this I don't know what to download

  HI @sami_3,

  Thank you for your inquiry.

  I understand that you receive a message saying: "there was a problem with the AMD-Display Adapter-ATI Radeon Graphics Cards. When you click on repair that you get a message that you are not connected to the Internet, but you are.

  I'd be happy to look for updates, but would need you know your exact model of the G Series notebook.  How can I find my model number or product number?

  You could try the HP Support Assistant to help acquire the right drivers running.  You could also test the graphic cards by running a hardware test on them. HP Notebook PC - hardware failures (Windows 7, Vista) screening. You will find the option for video under components.

  Please send the results of the troubleshooting.

  Please let me know if that solves the problem by marking this post as 'Accept as Solution'. "To simply say thank you, click on the" ""Thumbs up " below!   If you need more assistance let me know and I will gladly do everything I can to help.

• unknown device driver - problem

  I have problems with the installation of 2 drivers. they are listed as unknown device in Device Manager... "The drivers for this device are not installed. (Code 28) »

  ACPI\VEN_HPQ & DEV_6001

  ACPI\HPQ6001

  * HPQ6001

  ACPI\VEN_ASD & DEV_0001

  ACPI\ASD0001

  * ASD0001

  HP Pavilion 15 computer pc laptop 15-g003sm, windows 8.1

  Try to reinstall the graphics driver AMD.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135683-1&cc=us&DLC=en&LC=en&OS=4158&product=6806860&sw_lang=

  The AMD graphics driver for mobile phones latest also contains the drivers for the chipset. The driver you need is for the AMDas4 device.

• RECEPTION OF SERIES PROBLEM

  Hi... everybody... am using LABView 2009

  I did a VI.., because I need to receive the data by serialy and I answer back according to the data I received...

  here first am transmitting the data permanently (DOCK LIGHT - as a hyper terminal)... and am able to receive the data and also reply back through my VI...

  But if transmits me data only once in the DOCK LIGHT get no data...

  Please check my code and the answer me back as soon as possible, goes I am attaching my PROJECT.VI..., and Subvi.

  also the screenshot of DOCKLIGHT

  Concerning...,

  Maury

  How to run the VI?  You use the button run continuously?

  Run continuously is not expected to be used this way.  This is only to test the small screws that will later be used as subVIs and must be called repeatedly.

  Second, your serialcomm_subvi initializes and close the serial port whenever it is called.  You probably lose data during initialization or closing the port.

  Patches?  Wrap your code inside a while loop.  Add a stop button on your Panel before you stop the loop when finished.  Divide your serialcomm_subvi in three separate subVIs. The first is just the VISA set up series Port.vi.  Place outside the while loop and the name of resource VISA out of wire to the loop. The second part was writing, delay, and read functions. It goes inside the loop instead of your serialcomm_subvi.  The name of resource VISA to configure VI at the entrance of this sub - VI, rather than using local variables of the wire. After the loop put near the VISA.

  There may be other problems, but it will help you get started in the right direction.

  Lynn

• Max and LabView can communicate with the device series

  I'm trying to connect a balance Mettler - Toledo JL - 6001 to my computer as an entry for a LabView program through a RS-232 to USB line.

  In MAX, I get sometimes (but not always) the error message "the resource works correctly, but VISA cannot currently access."

  On the general tab for this port, I get the message' VISA returned this camera when searching for resources, and MAX was able to use VISA to analyze the resource name.  The resource was busy, so MAX could not successfully log on VISA to the device. »

  In LabView, the program runs, but I get all zeros as output which is definitely not correct.

  I tried deactivation and activation then the port. I tried making sure that no other program is using the device, and then restarting the computer.

  I'm not sure I have the correct driver installed for this scale (MTT coach), (they do a lot of balances and some pilots and was not sure than to use). I don't know if that makes a difference in MAX.

  A few tips for how to get balance and the MAX to communicate? Also, I know almost nothing about the transfer of digital data / series a response very dumbed down would be greatly appreciated.

  Thanks in advance,

  Joanna R Murphy

  Hello Joanna,

  Please take a look at this white paper. There are several solutions for this error.

  Best,

  Carmen C.