Devices cannot connect to Mobile Hotspot

Similar Questions

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• TOSHIBA f3507g cannot connect to mobile broadband from 3G (error code 0)

  It's really a strange situation. Yesterday I installed the latest 3GRF POWER UTILITY and driver F3507g 3 G then inserted the SIM 3G, my laptop can connect to the internet (HSPA) normally, but today when I download and install the latest software WIRELESS MANAGER in others to check data and texting, but now my laptop cannot connect to the 3 G network but that laptop still the 3 G signal. I also tested for texting on my phone and it works but connect to the 3 G internet is impossible. I tried to uninstall all the drivers of 3G and reinstall it again, but it does not work. When I cheking troubleshooting, he said that "the operation of network connection mobile broadband failed with error 0". I use win7 and download the driver 3G [http://aps2.toshiba-tro.de/wlan/]. Please help me, thank you very much!

  Hello

  What operator and SIM are you using? It works if you connect through the Win7 built-in connection manager? That is to say through her view available networks?

  Since you are able to receive text Messages, you can register properly to the network. This should be a profile/network problem. It works if you create a manual Profile Manager wireless with the correct settings for your carrier?

  It works if you use square DUN? See Howto on http://aps2.toshiba-tro.de/kb0/HTD9802OF0000R01.htm

• Cannot connect Blackberry mobile access point using Windows computer.

  Original title: connection problem

  I use windows 8 on my hp15 and also a cell phone blackberry q10... I noticed that the hotspot from my phone does not appear on the windows network. but hotspot of the else phone shows and connects perfectly well and my q10 hotspot shows and connects on their own computer... any idea on what could be the problem?

  Hi Adam,

  Thanks for posting the query on Microsoft Community.

  If I understand correctly, you are unable to connect the mobile access using Windows computer point. Don't worry, we will help you with the question. It could be matter of settings.

  Manage the network and other utilities mentioned in the link below and check if it helps.

  Why can't connect me to a network? :

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  Also try the other steps in the link below.

  Mobile broadband from end to end:

  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  For reference:

  http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do?externalId=KB31857&sliceId=2&DOCTYPE=KC&noCount=true

  http://docs.BlackBerry.com/en/smartphone_users/deliverables/55574/mes1342811963579.jsp

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• Some devices cannot connect to X 2000

  Hey guys, I've been setting up my new router Cisco X 2000 wireless recently and I have that works well for my laptop/desktop computers and even the PS3, but for some reason when you try to use the wireless on some of the other computers in my house it does not work unless you use a wireless guest account.

  Can someone point me in the right direction? I can't imagine what could be the cause.

  Oh and also, I use the Version of the Firmware: v2.0.01 if this is useful.

  Thank you

  James.

  you have security wireless for your network? What is the security mode used?

  computers that cannot connect to the network is not compatible with security for your network.

  to resolve this problem, you may need to obtain an updated driver for the computer's wireless network adapter.

• Wireless devices cannot connect to each other using the router EA6900

  I use the 2.4 Ghz network and none of my wireless devices are able to communicate with each other...  I could not connect to a wireless printer to my laptop wireless (through the router) and thought it was unusual.  I tried ping does not work either.  I then plugged a cable ethernet to the laptop and could ping the printer wireless without a problem.   I tried other devices (wired and wireless connections) and it seems that no wireless device can ping any other wireless device.  If, however, one of the devices is connected, it works fine...  All wireless devices to connect to the router and internet without problem... It's just when they try to communicate with each other.  I have experimented with the desktop using the ethernet adapter, then the wireless adapter... same results.  My wireless using my previous router devices could communicate with each other.  It's almost as if this device has insulated AP running if this so-called it doesn't support that.

  Customer service said: I'm the only one with this problem.  Does anyone else have this problem?

  I have an ea6900 and it works fine for me. Sounds almost like you are connected to the guest network which would be sort of this way. Did you do a power reset? It has never worked? Try to remove the power and back to see if it clears up it.

• Classic BlackBerry cannot create a Mobile Hotspot on my classic

  I'm here in New Zealand with a classic parallel imported Mobile unlocked in the United Kingdom. I can't generate a mobile hotspot. I do all the things asked of me, but just scroll circle keeps scrolling. I get data and emails on the phone and I had the sim card works in an iphone and successfully created a mobile hotspot. A Vodafone store that has tested the SIM did say that the configuration screen has not shown all the necessary addresses. Someone knows where and what settings can I change to fix the problem. It is certainly in the configuration of the phone.

  Hello. Made the sideload the last flight and mobile hotspot works very well. I still have the passport with the same problem, so happy to run that if you want to try and solve the puzzle! Really grateful for your contribution and your interest.

• Somes devices cannot connect to WiFi TimeCapsule more

  Hi everyone, I am facing a weird situation.

  Current configuration: the home Wifi is provided by a TimeCapsule, which has its firmware updated. A couple of device (10) are regularly connected (printers, iMac, MacBook Air, iPhone, iPad, iPod, etc.). Nothing very complicated.

  The situation:

  This morning, I had 2 friends at home with their personal devices (one tablet of Nexus and an iPad 1st generation). I tried to connect to my Wifi and it never worked. On the iPad, the wheel turned in the parameter space WiFi and no internet connection was possible. No Wifi setting has been provided by the TimeCapsule (no IP, etc.). On the tablet of the Nexus, I got more details: he was blocked at the stage of IP address get.

  Obviously, my first thought was to restart my TimeCapsule. Unfortunately, nothing has changed: these new devices have been blocked at the same stage and... my daughter iPod also got stuck. Exactly like the iPod from my friend. But has been connecting iPod to my daughter to my wife for the last 3 years!

  My friends finally left, so the problem is "over", with the exception of the iPod of my daughter. Until this morning, he was perfectly able to connect as usual, but now no.: the wheel keeps turing in the Wifi configuration. I have obviously reset network settings: nothing has changed.

  On the TimeCapsule, I see that the iPod gets an IP address. Also, when I change the name of the iPod in the control area, I can launch a sync to iTunes on the iMac and the iPod name is updated! So, this means that the iPod IS connected via Wifi, but it is not possible to browse the Internet or connect to what. The WiFi icon does not even appear in the top bar.

  All other devices (iPad, iMac, etc) works perfectly.

  Any ideas?

  M.

  ... except for the iPod from my daughter. Until this morning, he was perfectly able to connect as usual, but now no.: the wheel keeps turing in the Wifi configuration. I have obviously reset network settings: nothing has changed.

  As you probably already know, reset the network settings deletes saved passwords and network configuration details. It also exports the residual caches and preferences. Most of the time, it should be fixed.

  As it didn't, the only other suggestions I could give are:

  • Go to the option "forget network Wi - Fi" in iOS settings and then manually try to join the wireless network yet.
  • If this does not resolve the problem, then possibly one or more of your Wi - Fi connection settings for your wireless network may have to be changed:
    • Make sure that the network name does not include spaces or special characters.
    • Don't 'hide' your Wi - Fi network.
    • Try temporarily disabling Wi - Fi security to see if the iPad will connect now.

• Satellite A200 - cannot connect my mobile phone via Bluetooth

  I have the satellite A200 that came with Vista - I have upgraded to Windows 7. I tried for a few days to connect my new Nokia mobile to my laptop using bluetooth, but may not operate at all.

  The phone is OK as I have to connect it to my previous mobile via bluetooth. A few months ago, I had to do a restore system using the Toshiba drive - is it possible that this could have affected the availability of bluetooth?

  Any advice would be welcome - especially if someone can explain what it is I should do in a non-technical way. Thank you in advance.

  Question is: have you installed all the discs properly?
  You can activate the BT module using the FN + F8 key combination.

  I can't say for sure, but I assume that your BT in A200 camera is not correctly enabled.

• Device cannot connect all of a sudden

  Suddenly, I have a weird issue. The device can be auto-discovered well but shows not connected. When I have the strength of the to use to debug, it shows an unknown problem. BB Device Manager can connect with my camera. I tried with different ways as reconnect with the device, restart QNX IDE, but all have failed. Can someone help me?

  I finally found the reason. After restarting the device, the mode of development was back off automatically.

• Cannot connect in mobile since Lightroom Lightroom

  I get a message: your computer does not have to be connected to the internet when I try to connect to Lightroom Mobil. On the net and mobile it's OK. I have a version of the track and I had a try of lightroom mobile before. I tried many suggestions in the forum, but they have failed so far

  Hi Helgeto,

  Greetings!

  Try the procedure described in the link here: (cloud creative connection errors)

  Concerning

  Jitendra

• After upgrading to IOS 10 my devices cannot connect to PC

  I can't connect my Ipad and Iphone to my pc after that I updated to IOS10 but my ipad mini, which has not been update has yet no problem connecting to the pc. What should I do?

  No matter how many times I tried to remove the cable and click approval, nothing happens and still no connection to the PC

• Device - CANNOT CONNECT HP PHOTOSMART 5510 COMPUTER USING WINDOWS 7

  I need help in establishing a HP Photosmart 5510 to my laptop that is running Windows 7.  Can I connect the printer to my iMAC with no problems whatsoever, but I can't connect to my laptop.  It says thay there is no driver available for this printer. I also tried the HP website and they don't recognize the printer.

  Help

  When you are in the printer with the connected printer Add Wizard, select Windows update.

  It will take more than 5 minutes to get a list of printers that are updated.

• Cannot connect to Mobile Me, I can't find my phone, I don't have an iPhone 4!

  I am trying to upload a file to my public folder. A reminder of offensive ball appears and tells me that my where is my phone is not enabled for my iPhone 4. It is enabled for my iPhone 3GS. The ball won't go away. Password is OK, ID is correct.

  If you MS guys don't do this a little more intelligent, I won't renew again.

  Hi JimJBO,
   
  Try the steps listed in the article below and check if it helps you to fix the problem:
   
  MobileMe: Troubleshooting find my iPhone
   
  If this does not help, post your request in the Forums of Support from Apple

• Satellite Pro 6100: Bluetooth - how to connect the mobile phone

  I already have a satellite pro 6100 with the bluetooth software on. I tried to connect to my mobile phone without success. The problem seems to be with the laptop rather than the phone.
  How can I connect successfully. I have to update the new drivers? I bought it refurbished 3 years ago and I'm just getting round to the use of bluetooth!

  Well, the Bluetooth software has been installed on your laptop, BUT the question is:
  Your group has installed Bluetooth card?

  AFAIK the Bluetooth is an option available on this unit. You must check the Device Manager and check the bottom of the unit if the Bluetooth label has been placed.

  I think that you cannot connect your mobile phone because BT is not available.