Device - CANNOT CONNECT HP PHOTOSMART 5510 COMPUTER USING WINDOWS 7

Similar Questions

• Cannot connect Blackberry mobile access point using Windows computer.

  Original title: connection problem

  I use windows 8 on my hp15 and also a cell phone blackberry q10... I noticed that the hotspot from my phone does not appear on the windows network. but hotspot of the else phone shows and connects perfectly well and my q10 hotspot shows and connects on their own computer... any idea on what could be the problem?

  Hi Adam,

  Thanks for posting the query on Microsoft Community.

  If I understand correctly, you are unable to connect the mobile access using Windows computer point. Don't worry, we will help you with the question. It could be matter of settings.

  Manage the network and other utilities mentioned in the link below and check if it helps.

  Why can't connect me to a network? :

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  Also try the other steps in the link below.

  Mobile broadband from end to end:

  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  For reference:

  http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do?externalId=KB31857&sliceId=2&DOCTYPE=KC&noCount=true

  http://docs.BlackBerry.com/en/smartphone_users/deliverables/55574/mes1342811963579.jsp

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• cannot connect to the local network using windows 7

  Recently bought a HP Pavilion laptop (AMD Athlon II P320 Dual - Core) ((G62 - 208CA)). Having a problem connecting to the local network. I have flashing lights on the lan (orange and white) connector.

  Using the ipconfig command, I get an IP address, subnet mask and gateway by default however messages below will appear:

  Tunnel adapter isatap. <578608BD-22EF-4A01-90ED-D709CB81D027>:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel connection to the Local network adapter * 9:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel adapter isatap. :

  State media: media disconnected

  The connection-specific DNS suffix. :

  TEREDO TUNNELING Pseudo-Interface tunnel adapter:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel adapter isatap. our field: *

  State media: media disconnected

  The connection-specific DNS suffix. :

  I tried to turn off the firewall and connect without success

  My network card is a Realtek PCIe FE Family Controller and confirmed that the drivers are up to date

  Any help would be appreciated

  Thank you

  Well Yes! So it was an older version of the bonjour service... thank you Adobe.

  You can find the latest version here:

  http://support.Apple.com/kb/DL999

• Cannot connect HP Photosmart 5515 series wireless on my laptop

  Hello, I use a hp pavillion g6 and im trying to connect wirelessly to my printer Photosmart, 5515 but im having problems with the computer was implemented wirelessl room in my house for a while and me can print quite easily using my Iphone but I cannot set up wireless. He invites me to enter my IP address I do, but then he repeats just cannot connect I also tried to use hostname, but that does not work either please help the two devices are connected to the internet even and I checked they are running both on the same IP address

  Thank you

  Try to go in the tools on the printer and to restore the default settings of the network.  He's going to knock it out of the network briefly but then set it back up as if it were the first time.  You meet intellectual property conflicts, and it is a first step in troubleshooting.  It can change the IP address of the original one, as well, but that is not a bad thing.  Let me know how it goes.

• Remote Desktop cannot connect to the remote computer

  Hi all

  I'm having a problem on my server running Windows Server 2008 R2.

  I can not can not on the remote server by using remote desktop (mstsc).

  Here is the error I get when connecting:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I tried to restart the services, but nothing helped.

  I even restarted the server, which did not help.

  Also, I can ping the server without any problem.

  Kindly help. !

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  Try disabling the firewall - may have to be reconfigured.

  I suggest that repost you the question in the TechNet Windows Server forum for assistance.

  TechNet

• Remote Desktop cannot connect to the remote computer to one of the following reasons:

  We are using Windows server 2003 sp2 & windows xp professional sp3. We want to connect to the server using Remote Desktop, but we get the following error:
  --------------------------------------------------------------------------------------------------------------------------------
  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.
  --------------------------------------------------------------------------------------------------------------------------------
  We have enabled remote access on the server & the user is member of admin & users group to the remote desktop on the server. The firewall is turned on & exceptions for port 3389 remote desktop.

  Could you please help us on this.

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  What is happening to all users?

  -If you get an error in the TS, then this is a client-side problem.

  -Take TCP Dump using wire shark and see who is the RST sendign package.

  Look for this error message in google that could give you light...!

  Kind regards

  Dhruv

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• Your computer cannot connect to the remote computer

  Hello

  OT:

  Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

  I implement the remote desktop session based on Win Server R2 2012.

  I create a free sign for certificate certificate and also install the certificate to the client computer.

  But when I click on any application it shows me error.

  

  Hello

  You may need to ask the question on the TechNet forums. Please post the question here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• Settings need to connect a second desktop computer using a NetGear wireless adapter.

  Original title: wireless settings

  I need the settings to connect a second desktop computer using a NetGear wireless adapter.

  The Belkin router work a lot using my Tablet and streaming movies but I can't understand

  the settings on the second PC.

  Any help will be appreciated.

  Thank you.

  "Settings", you need are the SSID (network name) and the encryption key (password).

  Unless you have configured the router to 'hide' the SSID (generally a bad idea), you will see in the list of available wireless networks.  Then, the only thing you need is the encryption key.

  If you do not write your encryption key, you can find it by logging into your router configuration utility.

  If you have a computer running Windows can now connect to the router, open a command prompt window (start > run > cmd > OK) and type "ipconfig" (without the quotes) and press ENTER.  Take note of the 'Default gateway' address.  It is the IP address of the router.

  The default IP for Belkin routers is 192.168.2.1.

  On a computer that is already connected to the router, open a browser (Internet Explorer or Firefox) and enter the IP address of the router (the gateway by default, you noted above or 192.168.2.1).  If you do not have a computer that is connected to the wireless router, you will need to temporarily connect a computer to the router by an Ethernet cable.

  Connect to the router configuration utility.  If prompted for a password and you don't remember, you need to reset the router to its factory default.  Return ticket for additional instructions.

  Once logged in, click on "Security" under "wireless" in the menu.  At this point, you should see a page that shows your password.  Write it down and exit the router configuration utility without making any changes.

  For more help, post back with the model of your Belkin router and also mention if you have any Windows computer that can connect to the router (and if yes, what version of Windows they use).

• Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All computers on the domain work for RDP is only now a single computer.

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All other computers on the work of field for RDP is only now a single computer.

  This post on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• Unable to connect to the desktop computer running Windows 7 laptop running Windows 7, both in my home network, using remote desktop

  My desktop (host) is running Win7 Pro and my (client) laptop is running Win 7 Home Premium. For the office, I went to the control panel and allows remote connections. When I try to connect with the laptop in my same home network, I get an error message: Remote Desktop cannot connect to the remote computer you for one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Now, the computer is on and I can see what he listed as one of my computers on network. In fact, I accessed the command of remote desktop by right-clicking on the desktop in the list of networks and by selecting Remote Desktop in the menu dropdown.

  Obviously, I am missing something or something wrong. Please help me to understand.

  What do you call the remote [DRC] host desktop desktop machine, IE. local LAN IP static, the laptop?

  See this help as possible...

  http://theillustratednetwork.MVPs.org/RemoteDesktopTroubleshootingChecklist.html

• Whenever I connect to my hotmail account using Windows Live, I get a warning, "there is a problem with this Web site's secure certificate. »

  original title: security

  Whenever I connect to my hotmail account using Windows Live, I get a warning, "there is a problem with this Web site's secure certificate. »

  Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
  	We recommend that you close this webpage and do not make this Web site.
  	Click here to close this webpage.
  	Continue to this website (not recommended).
  	More information If you arrived at this page by clicking a link, check the Internet address in the address bar to be sure this is the address you've been waiting for. When you go to a Web site with an address as https://example.com, try to add the "www" in the address, https://www.example.com. If you choose to ignore this error and continue, don't get personal information on the Web site. For more information, see "Certificate errors" in Internet Explorer Help.

  Some things you can try:

  You can have old certificates root on your computer.  Try to update your root certificates from the link provided in the paragraph "Root Update Package (intended for Windows XP only)" in the following article:

  "Members of the certificate program root Windows.
    <>http://support.Microsoft.com/kb/931125 >

  Depending on which version of Internet Explorer and Service Pack level of your machine, one of the following articles might help you:

  ' "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site.
    <>0 http://support.Microsoft.com/kb/93185>

  "Certificate error Web page is displayed when you try to visit an SSL Web using Internet Explorer 7:"There is a problem with the security certificate from the Web site""
    <>http://support.Microsoft.com/kb/950067 >

  It is also possible that indeed, you will be redirected to a false site.  Check your file C:\Windows\System32\drivers\etc\hosts ensure that there is not a bogus entry for your hotmail login.  Generally, the only line that is required in this file does not begin with a character ' # ' is ' 127.0.0.1 localhost '.

  HTH,
  JW

• Smart Phone Hot Spot doesn't connect with my laptop Leveno using Windows 7

  My smart phone is a LG with Verizon Hot Spot spectrum. Hot Spot on, but it doesn't connect with my laptop Leveno using Windows 7.

  Spoke with verizon several times today and they seem to think that the last windows update can have turned on something from my laptop.

  Thank you

  Stan LG

  E-mail address is removed from the privacy *.

  Hi StanLX,

  To provide the proper resolution, that I would need more information on your side.

  1. do you receive any error messages?

  2 did you connect reactive to laptop before?

  3. What is the number of the Windows updated Knowledge Base article installed recently?

  Method 1:
  I suggest you run the network troubleshooter and check if it helps.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 3:
  If the problem is not resolved, I suggest you temporarily disable the security software and check if it helps.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• HP Photosmart D5360: check ink levels HP Photosmart D5360 and use Windows 8.1

  check the ink levels HP Photosmart D5360 and use Windows 8.1; Windows 7 has a HP Solution Center but Windows 8.1 is not?

  Hi @torbay,

  By your post, I see that you have no software to verify the printer ink levels using Windows 8.1. I would like to help you today.

  I checked online and there is a software HP Photosmart full feature and driverswho should still support the printer services. If you use the old or Windows Update drivers, remove them and install the latest drivers.

  You can also download and run the print and Scan doctor, it can predict the ink levels and services available for the printer. HP printers - help print and scan the doctor for Windows to solve printer problems. Go to the section how can I use the services of diagnosis and cleaning of printer?

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• I have an old Millennium edition I know sound as old as it might seem. I need to know if I can up grade my computer using Windows 7

  I have an old edition of Me of the Millennium, I know its as old as its sounds. I need to know if I can upgrade my computer using Windows 7

  Hello

  Unfortunately, it is not possible to upgrade directly from Windows Millennium Edition to Windows 7.

  You must install Windows 7 as a new copy on the system.

  I suggest you refer to the link for more information on the operating instructions below to buy and install Windows 7 on the system.

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  To know if your PC can run Windows 7 download the Windows 7 Upgrade Advisor from the link provided below

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  You can also check the following to check if your material conforms to the system requirements to install Windows 7 on the system:

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 system requirements

  http://www.Microsoft.com/Windows/Windows-7/get/system-requirements.aspx