Similar Questions

• Flash Air CC iOS: problems with loading text from an external xml located on a server.

  So I have this code allowing me to load the text of an xml located on a server. Everything works fine on Air for Android. The app works even in the ios emulator, but once I export my app on my ios with ios device 7, I do not see any text. The app is developed with Air sdk 3.9. What could be the reason? Do I need any special authorization like on Android? IOS even allow load xml from an external server?

  Clues?

  OK, I solved the problem.

• Hello, I want to DPS magazin for IOS and Android with a lot of text notes. There are about 200 notes per article. The idea is to make windows pop-up as EPUB 3.0. Help, please.

  Hello, I want to DPS magazin for IOS and Android with a lot of text notes. There are about 200 notes per article. The idea is to make windows pop-up as EPUB 3.0. Please help., Hello, I want to DPS magazin for IOS and Android with a lot of text notes. There are about 200 notes per article. The idea is to make windows pop-up as EPUB 3.0. Help, please.

  Remember that only you can create an iPad app using your simple editing solution (which is included in your subscription CC). So you need a Pro or business of DPS version to be able to create a Android version.

  You can create pop-ups in InDesign using slide show options and a multi-state object. But it's all manual work, then you're going to spend a lot of time on this point, also depending on the layout of your design.

• How to use iCloud for Windows if I don't have a fisrt iOS device sign in with?

  I lost 135 MB of download capacity for iCloud for Windows, so I can participate in the program of sharing with my children, to see the miserable piece of software I have to first sign with an iThingee, which I did and refuse to buy.  This makes iCloud for WIndows USELESS!  Ther3e anyway for me to activate iCLoud for Windows WITHOUT either one) fouling up to iThingees of my children by making them sign me on my Apple account and then re - configure their machines to RETURN on their own AFTER I get iCloud for WIndows goes on my Surface or b) purchase of an iThingee that I refuse categorically to buy?

  As you found, family sharing requires a Mac or an iOS device to start with. You can read this information on the use and configuration of the sharing of the family. Implement the family share - Apple Support  You can't use it on the Windows computer until it is configured on an iOS or Mac device.

• When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device. How can I work around this problem?

  When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device.  How can I work around this problem?

  Hi ejp70,

  1. did you of recent changes on the computer?

  2. to when was the last time the scanner was working fine?

  3. you have any other printer\scanner connected to the computer?

  If you have any other printer\scanner connected to the computer, disconnect them and check if it works.

  I suggest that you uninstall and reinstall the scanner to the computer, also make sure that you install the latest drivers for scanner on Canon website.

• Virtual Device IOS with SRA Appliance using

  IOS devices are able to connect via SSL VPN to the SRA AV? Is it possible remotely on a Windows PC using a Device IOS and the SRA VA? We currently use an IPSEC VPN to connect devices environment IOS internal VMware View with PCOIP. All plans at all to establish a secure connection between IOS and our environment from view? It would be really nice.

  IOS can connect to the virtual appliance SRA using the Mobile Connect Client available for free on the App Store.

  Once logged in you can then use
  Bookmark HTML5 RDP or use one of the many 3rd party as iTeleport applications.

  Nothing on the roadmap as of yet for IOS to environment view

• Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it.

  Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it. inactiveforumnotifier Newsgroup_User Zoheir Illustrator

  What is the format of your final work? How are you viewing? What version of Illustrator do you use?

  Here are some common reasons why your type might be missing - is your type completely on the artboard and bleed?

  Is your type on a layer that is set up to print not? Is your white type and position it to overprint?

  

  

• Ed. 11.5 w/patches supports Flash Player 10 and TLF text

  Hello world

  I am a new model of CD and I want to use the Flash CS5 AS3 TLF text.

  I will support more than 30 languages.

  What types of problems can I meet with my flash player 10 SWF.

  I have one or more shared font files to support languages too flash.

  Import the XML text.

  Bugs to know?

  Any recommendations? (well other than classic text of use)

  Thank you

  Jim Wiley

  Yes, he does. We have created some projects cdrom just as you describe. You need to be sure to include all glyphs appropriate - allows us to determine if the indifferent police can render text, then unmold not - or device fonts in Arial Unicode, so if everything fails to another AS3. If you have a lot of entries, then Director falls a bit short. The last time we used a classic entry with device fonts. But when we had a lot of comments, we could not use the Director at all and use 4 zinc instead. Hope that helps.

• IBooks on ipad pro crash after IOS updated with 9.3.1.please

  IBooks on ipad pro crash after IOS updated with 9.3.1.please

  I have the same problem after update 9.3 OS on my Ipad 2... Crashing in IBooks. PDF and missing books. I have access to my books for about a minute before it crashed.

  It still occurs with the 9.3.1 update.

  I don't really know where to go then except put it there the 9.3.1 upgrade did not fix my problem.

  Thinking that I might have to consider for an Apple Tech which is an expense I really don't think I should have to bear, because I did not cause the problem that everything worked fine with my iBook before upgrading the OS 9.3.

  Thank you

• Why is my imac printing docs pdf with squares instead of text

  I use OS X 10.9.5. When I want to print a pdf document was sent to me from an external source (for example, my electricity bill) the document is printed with squares where the text should be.

  Sometimes if I get an overview of printing, it will look OK but always printed with squares/no text, and sometimes it shows squares in the preview. I was not able to determine a trend.

  I tried to print the docs to two printers (HL 2140 Brother and Epson WF3620) with the same result. I can't find that someone has posted the same problem in any forum...

  If there are small places where individual letters should be, it's a problem of compatibility of fonts.

  If you print from Acrobat, you can work around this by using the option 'Print as image' under 'Advanced Print Setup:

  https://helpx.Adobe.com/Acrobat/KB/quick-fix-print-PDF-image/_jcr_content/main-p ars/img_0.img.png/Print-as-image-screens...

• M - Audio Keystation 61es device not recognized with Windows XP

  Having bought just a M-Audio Keystation 61es plug-and-play and running XP service pack 2, the computer does not design it.  I see on the online forum that these are not recognized in Vista either... Help.  I tried to download the right driver update M-audio - still does not work.

  Hello MotherKim,

  Thank you for visiting the Microsoft answers community.

  What version are you running to XP?

  According to M-referencing, this device is compatible with Windows XP SP2 Home / Professional Edition ONLY.

  How do you connect your deivce? Take a look at this image.

  If you simply connect with the USB, the nYou must not do anything other than plug according to the user's guide.

  Hope this information helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Has my Optiarc DVD RW AD-7200 ATA device (slot 0) does not work.

  It shows a code 39 (Windows cannot load device... driver driver may be corrupted or missing).  Can I just download a new driver from device and install or I buy?  If so, is there a legitimate site for this sort of thing?  Sorry for the newbie question.

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• JO 3830: Device Installation failed with 2081883393

  Hello

  I tried to install my printer but cannot go beyond the part of network installation.

  Printer is connected to a Wi - fi connection, PC sees the printer and found during the installation process.

  But there is this error code in the log file:

  "Device installation failed with-2081883393.

  How can I get my printer to install correctly?

  I can't even install it via USB and I tried all the steps in the Troubleshooting FAQ.

  I also tried all the steps of this thread:

  http://h30492.www3.HP.com/T5/Drucker-und-all-in-one-GER%C3%A4te-installation-und/HP-8620-Netzwerkins...

  Please help me I am desperate.

  Concerning

  PS Fax and scanning has been installed properly, then scanning works. Print to the printer also works. Only install under win7 print driver is buggy.

  Hi 8lives

  Thanks for the quick response and the link. Unfortunately, these measures have nothing to solve the problem.

  But I found the solution myself:

  the system variables %tmp% for the temp folder when incorrect. I removed a disk on which I had the temp folder, and Windows do not rewrite these variables.

  1 Control Panel > system > advanced system settings > advanced > Environment Variables > System Variables

  2. change E:\Temp in C:\Windows\Temp for 'Temp' and 'Tmp '.

  I hope that maybe I can help someone else with this solution.

  Kind regards.

• Headphone Jack, not to let the two devices at the same time - work Realtek problem - Dell Audio is unusable

  A copy of my post TomsHardware, where no one was trying to help:

  "To begin with, no thread any where online have solved my problem. My problem in the simplest possible terms:

  -J' bought a Razer right headphone, it does not work when it is connected.

  -J' spent the next 4 hours of downloading, re - download, install, uninstall and reinstall the Realtek drivers, because everybody says I had allow a setting or a related subcontractors as struggling separate devices or something, and I do not have the Realtek HD GUI; at least, I don't think so...

  - Then I discovered that Dell has decided to replace GUI from Realtek with "Dell Audio", which had two options, one of them being that it should even display settings or not.

  -J' took a few steps in Dell Community site and spent the Realtek driver with the Microsoft driver, and that got the headset to work.

  -My headset works fine, but the microphone is not yet detected.

  What I have relevance: right Razer headphones + microphone detachable; Dell Inspiron 15 w / only, audio unified; each unique Realtek and Microsoft audio driver compatible with Windows 8.1.

  What I don't have: the Realtek audio Manager.

  What I wish I had not: Audio from Dell.

  Someone please help me on this, because I have just fired over $100 for it, and I intend to use it for professional players and podcasting; no microphone is not cut it.

  Sorry if I look really angry at the moment, but I think we've all been there...

  Thank you. »

  The main issue: there is a definition of Realtek Audio Dell only exists to ban, I need to change that. I need to configure it to allow two different devices to use in the same decision, and Audio Dell replaced Realtek GUI with its own, which is pretty... Pretty useless. The two parameters, as there, one of them is "Show advanced settings", so congratulations to anyone who decided to do this monstrosity.

  EveryNameWasTaken

  Every post that I found online said that the Realtek HD GUI is the way to go

  Since you can't have the DD Realtek Audio Manager in a Dell, one wonders how they determined it was the answer.

  EveryNameWasTaken

  I just need a way to access

  My question is how to get all these other people. I think that probably they were not talking Dell laptops and their solution applies to some other manufacturers products.

  EveryNameWasTaken

  Please provide another way to separate input devices that are entered into the same outlet

  A headset devices are already separated in the properties. A helmet is an input device, microphone, which can be set as the default device in the properties (Control Panel > sound > recording tab > micro). It is for the internal microphone until an external microphone is connected. The other part of the headset, the headset is governed by sounds > playback > speakers. Who controls the speakers until the headphones or external speakers are connected.

  EveryNameWasTaken

  Inspiron 15 3542

  Thank you. I wanted to know because a couple of the Realtek drivers have a problem with the headphones or the part headphones headphones. Headphones are recognized by their impedance detection and I think that some of the drivers have their settings come down a little, or too narrow. None of the Realtek for the Inspiron 3542 versions are known to be bad for me, but if you get audio in the headphones using the native driver but not as the pass of the Realtek driver then I feel that the fault is with the Realtek driver. You can see all the drivers that comes from Dell for your model in the Inspiron 15 3542 html page. There is audio for Win7, 8.1 and 10 pilots. "WB" means 8.1 and 'WT' 10. I think that there are 2 of each. Try the two for any operating system you have. (If you have10 which, in itself, could be the problem - other people have said they have started the headphone problems when they installed 10) You should not try to install an older version of the driver on a newer version. First remove the newest one in the control panel.

  EveryNameWasTaken

  It befuddles me that Dell would give us a different GUI that has so few options

  I don't know if Dell Realtek & made that choice for technical reasons or something. I think that some of the laptops did not have the Realtek Manager when Dell has started using Realtek as a supplier, but that changed. Of course no one is happy to have fewer options, but yours is the first post, I've seen that reported to the mic. Many other posters have been unhappy, because Dell's Audio Manager does not provide a way to separately control the volume of the headset which is a problem because they can be much too strong, but the real Realtek Manager has an option to display ' phones as a separate device from the speakers.

  EveryNameWasTaken

  I did not buy a $100 laptop, I bought the headphones for $100

  I thought that you had purchased a used laptop. Some of the older 15 Inspiron are probably pretty cheap now.

  EveryNameWasTaken

  -A system restore will not change anything

  I run a retrieval system to remove windows or configuration problems, but that's just me.

  EveryNameWasTaken

  decision does not have a headphone and microphone with any device I checked

  If the plug does not work with any headphone it either because of the Realtek driver fails detecting the defective hardware or it. You should report to technical support if you have an extended warranty.

  EveryNameWasTaken

  "and I used an adapter USB jack to try my usual Microsoft LifeChat headset).

  Is an adapter USB jack of the same thing that the USB input audio in my previous screenshot? A usb plug avoids the problems of the Realtek combo decision-making because the USB does not use Realtek hardware or driver from Realtek. Headset LifeChat know either, but if they are a usb headset while they should work. USB audio devices are as separate sound cards - each device contains its own audio codec, even the small usb Jack. If a device usb audio does not work, it has nothing to do with the hardware, driver or Realtek Manager.

  EveryNameWasTaken

  Another laptop, an HP G62 old without a grip combo under Windows 7 Ultimate, could run them all very well

  You me lost there. The headphones you have tried in the Inspiron have a single plug for a headset jack (4 segments - TAKING), that looks like this?

  

  and you connected to a microphone jack on a laptop with the separate mic Sockets & normal headset?

  EveryNameWasTaken

  each response that I get from either Razer themselves or now these forums was condescending.

  Your two posts today have assumptions that make it difficult to formulate a convincing answer, but I I don't think I'm condescending. I try to avoid the annoyances that we see in so many forums. However, they are your feelings and you have a right to them.

  When I said to forget taking combo, I wasn't brushing off the problem, while recognizing that these mic combo jack issues are difficult, in large part because we can't use the native driver to test the Realtek driver, so we can't easily determine if it is a driver or a hardware problem. It is much simpler to use usb audio, but as I said I don't know what are the special features are required for your purposes of pod casting.

• internal card reader must be disabled and then enabled in before Device Manager it will not work properly.

  Whenever I start my computer, my internal card reader must be disabled and then enabled in before Device Manager it will not work properly. I put an SD card in there and auto does not work. I check my computer and it shows that it is there, but when I double click on it to open it I get a message saying: Please insert the SD card. When I go to Device Manager and disable and enable fine orks. I tried different cards, but it makes no difference.
  I installed a different card reader, but another did the same thing. This leads me to think it's a matter of Windows.
  I tried to do a repair install, but it ends and said that the upgrade has failed?
  Anyone have any ideas on how to solve this problem.

  I am running Windows 7 Pro 64-bit. It is a Renesas controller and I use the 2.1.28.0 with firmware driver 4015.

  I'm not sure but I may have found the problem. I see where a guy here was having a similar problem and it was caused by Acronis. I recently installed Acronis 2012. I have been lucky to uninstall, but I will update this post when I do.  He was also running windows 7-64 bit on a motherboard ASUS!

  Acronis was the problem.  I uninstalled Acronis and now my card reader works as it should.  Strange!