DFM 3.0.1 about device discovery

Similar Questions

• HP CUE device discovery service

  Hello

  I'm running a Compaq Presario AMD Athlon (TM) 64 Processor 3300 +, 2411 MHz/1.93 GB RAM, running Windows XP Home Edition, SP3, IE7 and everything is completely updated and corrected.

  I am the new owner of a HP Photosmart C5580 all-in-one.  It works great except that I see on some times when I start Windows, I get the text following error message listed in the "System" on my event viewer:

  "HP CUE suspended starting devices Discovery Service."

   

  (1) is - should I be worried?

  (2) what is actually HP CUE Device Discovery Service?

  (3) is it something I can turn off in 'Services' and not suffer any permanent damage?

  Thank you and best regards,

  2harts4ever

  "... enough Said." Keep smiling because I'm smiling too! »

  The "job" of this service is to identify all of the newly connected HP devices and configure them to be used with the program from the HP Solution Center. If this is the only device HP, you will use with this PC, you can disable it in the Services list as you clear any other service. be sure to stop everything first.

• Question of discovery for the DFM "stuck in Questioned state devices" device

  Hello

  We have LMS 3.0.1 installed with DFM 3.0.4 devices display Questioned with error code "SNMP timeout" without any specific reason. The snmpwalk is coming to the unit I checked with the snmpwalk command. The only device discovered as "known" has authorized ICMP from the server to the device and any other device. They don't have that SNMP permit. This reach the dicovery? or what else can I try... Please think!

  Rgds

  Yes. DFM requires that all SNMP and ICMP accessible devices. DFM uses the ICMP protocol to check accessibility to all IP addresses on the device. However, at the very least, the address by which you manage the device MUST be accessible ICMP.

• Ask about guided discovery

  The reference of the plugin guide suggest create a customdiscover.lst file and map the detection for the discovery category DHS_DISC script. Where is the map in this category. I mean in the discovery metadata that looks

  There are no DHS_DISC and demo_hostsystem_discovery.pl instead. How does the mapping to the category dhs_disc reached.

  ======================================= Discovery metadata file================================================

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < EmTargetDiscovery xmlns =" http://www.Oracle.com/EnterpriseGridControl/disc_metadata "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance " xsi: schemaLocation = " http://www.Oracle.com/EnterpriseGridControl/disc_metadata discovery.xsd" >

  < DiscoveryInfo >

  < CustomDiscovery >

  < name DiscoveryModule = "DemoHostSystem" resourceBundlePkg = "" >

  < NLSID display = "dhssys_display_id" >

  < NlsValue > Demo target host system < / NlsValue >

  < / display >

  < SupportedAgentOsList >

  < SupportedAgentOs > 2000 < / SupportedAgentOs >

  < / SupportedAgentOsList >

  < BasicDiscoveryInfo >

  < DiscoveryScript > ORACLE_DB < / DiscoveryScript >

  < DiscoveryCategory > ORACLE_DB < / DiscoveryCategory >

  < / BasicDiscoveryInfo >

  < TypesDiscovered >

  demo_ucssystem < TargetType > < / TargetType >

  demo_ucschassis < TargetType > < / TargetType >

  < / TypesDiscovered >

  < CustomDiscoveryUI >

  < LaunchADF >

  < DestOutcome > goto_core-mpcustomdiscovery-page < / DestOutcome >

  < / LaunchADF >

  < / CustomDiscoveryUI >

  < / DiscoveryModule >

  < / CustomDiscovery >

  < / DiscoveryInfo >

  < / EmTargetDiscovery >

  customdiscover.lst is used to map the name of the category to the script name. Although xsd is needed, that metadata is not currently used.

  customdiscover.lst takes the form:

  |

  Script and category name are separated by a vertical bar

  example:

  ORACLE_DB | OracleDB.pl

  Thank you

  Kondayya

• Difficulty Error 1303 C / / Program Files (x 86) HP Digital Imaging/Data/Device Discovery?

  Please help because I have tons of homework for my college classes and I can't get this to work.

  Hi Natividad,

  Thank you for sharing the resolution which will help others facing the same issues to fix.

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• hardware device: what is the code 43?

  hardware device: what is the code 43?

  Hi Timothy,.

  Thanks for posting the question in the Microsoft Community!

  According to the description provided, looks like you want to know the description of error code 43.

  However, we need more information about the issue to help you better. Please help me to answer these questions.

  1. what operating system do you use?

  2. when exactly you get this error?

  3. were there any changes made to the computer before the question?

  Visit this link for the operating system you are using.

  http://Windows.Microsoft.com/en-us/Windows/which-operating-system

  This problem occurs when an engine control unit notified the operating system that the device has failed in some way.

  Visit this link to learn more about Device Manager error codes.

  http://support.Microsoft.com/kb/310123

  Hope this information helps. If you have any questions with Windows do not hesitate to answer and we will be happy to help.

• "Solution Center cannot work because your device installation is not complete."

  I read the posts that deal with this problem before, but none of the solutions seem to work for me. When you try to open the solution Center I get the error message: "Solution Center cannot work because your installation of the device is not complete."  Argh, again! He used to work, but all of a sudden no longer. I uninstalled it, reinstalled, restarted print spooling, update adobe flash, has run windows updates, changed the "HP CUE Device Discovery" start-up, disabled virus protection, tried to connect by USB instead of wireless, etc... I also tried:

  1. download and install the following update

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77751-1&cc=us&DLC=en&LC=en&... =

  2. type % temp % in the field of race

  3. Locate and open the folder starting with 7z (example: 7zS2356)

  4 open the Util folder

  5 open the CCC folder

  ...

  ...

  .. but is there a "Util" folder in the folder starting with 7z...

  I don't have a disk, rather downloaded the software.

  It sucks, any other suggestions...?

  I have a computer Dell Vostro laptop running Windows 7 Professional 32 - bit and 64 - bit, connected wireless to a HP Photosmart C4599 all-in-one.

  Thanks in advance for any help!

  I finally got it! I have decided, once more, uninstall and reinstall. I eventually several files that began with 7z... I found one who had a "Util" folder it contains and a "CCC file" in this context, so I was able to continue with instructions of a related post, HP employee "pcwizard":

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-80348-1&cc=us&DLC=en&LC=en&...=

  10. run the download to reinstall the printer

  So I'm pumped it worked, but why is this problem even occurs?

• I need help, its frustrating me! network discovery does not illuminate.

  my network discovery does not illuminate. Whenever I try to turn it on I get an error message that says: (the specified service does not exsist as an installed service)! I need to elp, its frustrating me! I have windows vista.

  Hello

  Did you change your computer?

  Method 1:

  Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.

  Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
  1. click on start, type firewall and then click Windows Firewall with advanced security.
  2. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP) - in the list.
  3. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
  4. apply the changes and check the result.

  For more information about network discovery, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-network-discovery

  Step 2: Check the status of the following services: browser, TCP/IP NetBios support.
  1. Click Start, type services.msc and press to enter.
  2. from the list of services, double-click the service computer browser and TCP/IP NetBios support.
  3. change the startup type to automatic and start the service.
  4. apply the changes.

  Method 2:

  Now we go ahead and try to enable the discovery of the network on your computer and check for the issue.

  Network discovery is disabled by default for public networks. Changing a network location type to home or work is the best way to turn on network discovery. To learn how to change a network location type, see Choosing a network location. To enable discovery manually, follow the steps below.

  To turn on network discovery

  1. open the network and sharing Center by clicking the Start button, clicking Control Panel, clicking Network and Internet, and then click Network and sharing Center.

  2. If network discovery is off, click the arrow button expand the section, click turn on network discovery, and then click on apply. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  I also suggest you turn on discovery of the network link and check.

  Enable or disable network discovery

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-or-disable-network-discovery

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• Cannot turn on network discovery. I get the message "specified service does not exist as an installed service.

  Suddenly, something has changed in my computer and now I can't turn on network discovery. Every time I try, I get message "the specified service does not exist as an installed service. I get the same message for others e.g. file sharing and printer sharing. Changes the most recent have been updated to McAfee a few days ago. But the network worked well until last night.

  Hello

  What is the brand and model of your computer?

  Method 1:
  Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.

  Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
  a. Click Start, type firewall and then click Windows Firewall with advanced security.
  b. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP-) in the list.
  c. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
  d. apply the changes and check the result.

  For more information about network discovery, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-network-discovery

  Step 2: Check the status of the following services: browser, TCP/IP NetBios support.
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click the service computer browser and TCP/IP NetBios support.
  c. change the startup type to automatic and start the service.
  d. apply the changes.

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  I hope this helps.

• Where is the peripheral origin obsolete event ID 370 print spooler? Obsolete device can be removed from the operating system?

  I get a recording of event ID 370, about once every four days, what about the EPSON Stylus COLOR 460 printer ESC/P 2. I recognize the device as an old device, which is no longer necessary, that I thought was completely uninstalled years ago and I am slightly surprised to see that the tracks still on the computer, or not, as it appears.

  It is that I don't know if this record event was caused by a device driver package or the registry keys and values? Is the event ID 370 caused by or for both (device driver package / registry values) being obsolete?

  I have the old appliance any longer, so it seems sensible to remove traces of the system and in turn eliminate the causes of event ID 370. However, to find all traces causing the registration of the event? What traces can be removed without problem?

  1 today, this device does not show as a device available in display devices and printers to devices and printers.

  2, I was unable to see a name similar unused volume in trying to remove the old device (when looking faded icons in the branches of the Device Manager with emphasis on -pilot no Plug and Play, other devices, portable devices, Port (COM & LPT), Printers).

  3 reveals regedit there are registry keys and values in the registry that reference naked always at "EPSON" searches for the word. Yes, I have reason to assume that these registry keys and values have caused event ID 370? Is it safe to delete the registry entries, or should the registry key entries to receive new values? (I don't want the deletion of these registry values to cause instability in the print spooler.)

  Event ID 370 Description:
  The print spooler could not regenerate printer driver information for driver Epson Stylus COLOR 460 ESC/P 2 for Windows x 64 environment. Win32 system 2114 error code (0 x 842). This can happen after an upgrade of the operating system or due to loss of data on the hard drive.

  Search for "EPSON" in regedit concludes:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\ {in} {KEY} 13.10.2011, 13:18 HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\
  HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\ {in} {KEY} 13.10.2011, 13:18 HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\
  HKLM\SYSTEM\ControlSet002\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2
  HKLM\SYSTEM\ControlSet003\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2
  HKLM\SYSTEM\ControlSet004\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet004\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2
  HKLM\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2

  It seems that traces of information about devices are still present in the registry (invalid entries), which causes the event. Run a registry cleaner will solve this problem, but please visit the following link before continuing:

  http://Windows.Microsoft.com/en-in/Windows/are-registry-cleaners-necessary#1TC=Windows-7

• Cannot change the discovery network

  I can't change the network discovery setting making it impossible to find a printer wireless etc.

  I found a few things here, but they did not work

  I tried to start the browser of the computer and put in automatic and start the service.

  I get the following error

  Windows cannot start the computer on Local computer browser service

  Error 1060 than this specific service does not exist as an installed service.

  Is there somewhere I can install it?

  Hi Chris,

  Hello

  What is the brand and model of your computer?

  Method 1:
  Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.

  Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
  a. Click Start, type firewall and then click Windows Firewall with advanced security.
  b. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP-) in the list.
  c. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
  d. apply the changes and check the result.

  For more information about network discovery, see this link:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  Step 2: Check the status of the following services: browser, TCP/IP NetBios support.
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click the service computer browser and TCP/IP NetBios support.
  c. change the startup type to automatic and start the service.
  d. apply the changes.

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• I have Windows 7, so where is the Device Stage?

  When I read about Device Stage, it seems that it should be provided with the program.  My daughter has it on his cell phone and she said everyone knows has it as well.  I never saw it on this computer, I have had for over a year.  Windows 7 is installed on my laptop (Toshiba Satellite). Don't know what other information to provide. Thank you!

  You will see that the first time you open devices and printers. You probably answered to it when you've got the laptop.

• Im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected.

  Hi im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected. What should I do? Thank you

  Hello

   
  1. have you checked the problem by plugging the headset to another computer?
  2. it worked before?
  3. What are you talking about ""device"is not connected?
   
   
   
  I suggest you to connect to another computer and check.
  Also check if the device is compatible with Windows 7.
  Reference:
  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/
  If it's compatible, perform the methods below
  If it is not compatible, see the following articles:
   
   
   
   
  What is program compatibility?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
   
   
  Method 1: Run the audio Troubleshooter and see if it helps.
  Open the audio playback troubleshooting utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
   
   
   
  Method 2:
  Run the Fixit described in the article and perform the steps:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  See also:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
   
   
   
  I hope this helps.

• Officejet 5610 - constantly updated duty to update

  I have an Officejet 5610.  Operating system is Vista SP1.  About 3 - 4 times a week I'm being invited to re - install the drivers when I turn on the printer.  The Officejet is my default printer.   I have reinstalled drivers several times.  Eash time in this case, I am also be prompted to configure the fax and register the product.  I did this several times also.  Y at - it a fix for this problem? Thank you!

  the installation starts from 96%? If this is the case, then type "services.msc" in the run window, look for the HP CUE Device Discovery Service. Double-click it, then click the Stop button to stop the service, and then change the startup type to disabled. Click on apply and reboot PC huh and then check if you get the installation once more. Ideally, you should not.
  
  go back for any clarification.