DHCP reservation for port VMkernal

Similar Questions

• EA6200 DNS / DHCP reservation

  Hello.  I recently replaced my old router with a Linksys EA6200, and I'm having a little trouble getting a local DNS is working properly.

  On my network, I like to set up DHCP reservations to make it easier to find certain machines.  For example, let's say I have a DHCP reservation for 192.168.1.101 for a machine called "bob".  DHCP seems to assign the IP address to the machine, so that part seems to work very well.  But the DNS server of the router does not have "bob."  It worked well on each other router I've owned.  Any ideas what I'm missing?

  OK, I think I knew what was going on, but I'll leave this here case that someone else has the same problem. It seems that my clients were still on my old router dhcp lease, so they had not recorded. Forcing them to renew their dhcp lease seems to correct the problem.

• EA4500: DHCP reservations problems after FW v2.1.41 (Build 162351)

  Hi people...

  I liked the new FW 2.1.41 (Build 162351), BUT I'm having
  a big problem: DHCP reservations.

  With the FW 2.1.41 (Build 162351), reserves of DHCP
  does not work. I have set up the set, but after I click in a request,
  EA4500 change everything, put a few crazy IPs to my devices.
  remove certain devices etc.

  SOLVED!

  I support FW v2.0.37 and I noticed that there is no subnet mask 255.255.254.0 in options...

  Then, I put the new FW (2.1.41) and choose the 255.255.255.0 subnet...

  When I tried to make the DHCP reservations I don't have problems...

  In short:

  If I use the FW 2.1.39, I can use the subnet mask 255.255.254.0 and the

  DHCP reservations works...

  If I use the FW 2.1.41, just with the subnet mask 255.255.255.0 or

  255.255.255.128 or 255.255.255.192 which DHCP reservations works.
  

  In my view, that it is a firmware issue

  Now I'm happy.

  Thanks for all!

• WRT1900AC limits of DHCP reservation

  When you set the WRT1900AC, I want to put on 50 DHCP reservations (these are virtual machines deployed by other software that gives me known MAC addresses, but sets to get the IP address of the DHCP server and I need them to be called IP addresses for a classroom environment).

  The problem is, once you've spent 12 reservations, the button 'OK' to save is off the screen and there is no scroll bar.  I can understand the number of tabs to reach the stop button, but I know that I'll never be able to see the full list or below the most important area where is shows who is connected with what IPs currently.

  (1) this form should get fixed.

  (2) is there a way to set this up, like downloading a configuration file.  I used to do with DDWRT on my old G 52, but I am wary of jumping to DDWRT on a newer platform.  Is there another method of confururation other than the GUI?

  It is a bug. As a solution to use the zoom of the typical browser.

• EA2700 DHCP reservations

  Hello

  I have an EA2700 running the latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I can't access the link of DHCP reservations under local / network connectivity. When I click it, nothing happens. I tried several browsers including IE 10 (Windows 8 RTM), Firefox and Chrome 21 15. I also tried on a Windows 7 with IE 9 machine, and the link does not work on either except that it contains a box which says: invalid character when I click the DHCP reservations link. I don't see no invalid characters on the screen. Any solution other than the downgrading of firmware or assign a static IP on the individual PC?

  In addition, on a unrelated note, where is the configuration of Dynanic DNS on the Cloud Connect to Cisco?

  Thank you

  Maaz

  Thanks for your help. There was an update of miinor for the 1.1.38.138880 that the cloud would not pick up in the automatic updates or look for the updates, but the release notes said not much other than it was to make it easier for the firmware downgrade the firmware.

  I manually installed that one and it has not made a difference, but I found the problem. I got the name host encoded as maaz.local. Surprisingly, this is what was causing the invalid characters message when I clicked on bookings DHCP with IE 9 (with all the other browsers, I don't got no error message). When I changed the host name to just maaz, DHCP reservations link work began. Go figure!

  Maaz

• PC 6248: Obtaining DHCP address for incorrect subnet.

  I recently inherited a Dell PowerConnect 6248, which I am not familiar with, and I'm trying to use it as a switch Layer 3.

  I have a 10 of VLAN with a network 10.10.10.0/24 and 11 VLAN with an associated network of 10.10.11.0/24.

  When I statically assigned addresses on the clients on the ports configured for these VLANs. I can ping other subnets, and traffic is routed correctly.

  I also support IP configured in the world pointing to my DHCP server, and I installed the DHCP scopes for the associated networks VLAN 10 and 11.

  When I connect a device to a port configured with VLAN 10, I get a the network 10.10.10.0/24 DHCP address.

  However, when I connect a device to a port configured with VLAN 11, I receive a DHCP address also in the 10.10.10.0/24 when he should be in the 10.10.11.0/24 network.

  The VLAN, routes and extended DHCP appear to be properly set up everywhere. Yet once, when customers use statically assigned addresses their VLANs and adequate networks, traffic is routed normally. But I'm getting DHCP addresses for the incorrect subnet for clients connected to the local network VIRTUAL 11.

  Any help is greatly appreciated!

  Looks like you're real close how it works, we just miss something in the configuration.

  When you configure the port for VLAN 11, which command do you run? Once it is configured for that VLAN, we can confirm that by simply running a show on this interface command.

  It may be useful to see the configuration running on the whole, this will help us to look for any possible changes, we can offer you.

  If you could give us a screenshot or the decrease in the size of the DHCP scope settings, we can help those look too.

  Thank you

• I bought an iPad 2 Air and reserved for a free service call to show me the ropes. Nobody phoned me in the allotted time. What should I do?

  I bought an iPad 2 Air and reserved for a free service call to show me the ropes. Nobody phoned me in the allotted time. What should I do?

  Click on the help link at the top of the page and connect with Apple

  Or you are welcome to ask us your questions

  iPad - configuration - Apple Support

  User Guide - Apple iPad

• I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

• Noise - HHCTRL. OCX occupied an address box reserved for Windows system DLLS

  OK so I have a satellite phone and since yesterday, whenever I turn on my laptop, I get this message: -.

  RTHDCPL. EXE - repositioning of unauthorized system DLL
  DLL user32.dll system was moved in memory. The application will not work correctly. The move took place because the DLL C:\WINDOWS\system32\HHCTRL. OCX occupied an address box reserved for Windows system DLLS. The vendor supplying the DLL should be contacted for a new DLL

  So, I sat like 1 million bulletin boards etc. and not got anywhere. I'm normally ok with computers, but this time I confess that I have not the slightest idea what to do. It of really bugging me, can anyone help? Some message boards have taken me to a link on the Microsoft Web site to download something, but it says you must have windows XP service pack 2 and honestly, I have no idea and do not want to download something to totally screw up my laptop! (ok, maybe I'm not very good with computers!) Also, I found a site telling me something to do but I had no idea where to go or anything! I need someone to tell me EXACTLY what to do to get rid of this really annoying message. Also some sites say that when you press 'OK' another message appears, mine isn't it just goes!
  Please help, has soon x

  Please do not post new discussions on the topic that were discussed here in the forum. I always recommend looking before opening the new thread.

  Then please check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21936

  This problem occurs because Microsoft released a new patch for the closure of a breach of security in Windows Internet Explorer.
  But this patch has a bad influence on the Realtek audio chip.
  That's why Microsoft has released a patch to fix the old fix. ;)

• "Reserved for Scan PC scanner"

  When I try to scan with my 3055 I get the message "scanning error. Unable to connect' "Reserved for the PC scan Scanner."

  There is no another scan attempt.  I can do a preview and see the picture very well.  But when I type analysis this problem occurs.

  I've seen many references to similar problems, but no solution.  Can anyone help?

  Thank you

  DJV

  Well... I think I've solved my problem.  Installed the new firmware from the device and scanning has started working.

• Router not configured for port forwarding

  I use a modem wireless to my ISP, they block all ports less than 1024 and I need to forward ports 80 & 440

  How can I solve this?

  If you configure your router for a LenovoEMC Personal Cloud and always see the message, "Not configured router for port forwarding" under personal cloud Configuration, one or more of the following ports are probably blocked by your internet provider (ISP): 80, 443or port selected in the range 50500-50599 .

  Port 80 is used for internet access (HTML UN-secure) in general. If this port is blocked, but the ports 443 and 50500 are open, the Personal Cloud will work correctly even if the error message appears.

  Port 443 is used for remote access on the host network storage device. If this port is blocked, but the port selected in the range 50500 is open, you will be able to use the Personal Cloud LenovoEMC and invite others to use it, but you will not be able to access your network storage device via the Internet URL. (See answer ID 30773 for more information on access remotely through Personal Cloud LenovoEMC.)

  A port in the range of 50500-50599 must be routed through the router to use the function LenovoEMC Personal Cloud. If this port is blocked by your ISP, you will not be able to access the Personal Cloud to your network storage device or invite others to join the Personal Cloud. (For more information, see answer ID 29070 .)

• Error number reserved for the user

  Dear Sir

  In my sweet, I use the cluster of error defined by LabVIEW

  Y at - it a series of numbers reserved for the user.

  Thank you

  Massive

  Help:

  Error codes 5000 to 9999 and-8999-8000

  http://zone.NI.com/reference/en-XX/help/371361B-01/lvhowto/creating_user_defined_erro/

  And als

  500 000 to 599 999

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=410869&query.ID=3477275#M410869

  Felix

• How can I find my password for port locker

  I'm trying to back up files on a USB device, and a window opens asking a password for windows port locker. I don't know the pass wod. Where can I find?

  Hello

  1. what operating system do you use?

  2. have you set any password for port locker?

  3. you are a system administrator?

  I suggest you to contact the software publisher to recover the password for port locker

  In addition, technical support engineers Microsoft cannot help you recover passwords files and Microsoft who are lost or forgotten product features.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126/en-us

• What linksys Modem router supports WOL or DHCP reservation?

  Hi all

  What linksys Modem router supports WOL or DHCP reservation?

  Thank you Alex

  Hello. I checked the site made up of Cisco and up to 3000 X & X 2000 has the DHCP reservation and like many Eseries routers they have. Just try to check homesupport.cisco.com.

• Table of DHCP reservation

  I just assigned a manual static IP on my WiFi printer and reserved in the DHCP reservation Board. Which works very well.

  The problem is, ALL the devices listed in this table, take the name of the device that is reserved, after you save the settings. Even if I change the name (something like "printer"), then all of the other devices also take this name, when I save the settings.

  Is that all that I should be concerned about? I updated the firmware (made yesterday); is there something that I can or should do about it?

  The changes take place in the 'Customer name' of the upper table column.

  IT is recommended that you set a static IP address ON the device or put a reserve ON the router, not both. I recommend that you set static on the printer as it does not need much, if any, internet management or a router. IT what I do with my 3 printers.