PIX as a NTP server for inside networks

Similar Questions

• "Your computer could not renew its address from the network (from the DHCP server) for the network card"?

  I saw this question posted several times here, but I can't find someone who has exactly the same problem I have.

  This problem started a week ago. Basically, my computer loses its connection ethernet once per hour to around the same exact time. which is only for about 5 seconds, but it's enough to get Skype and other things while I'm working, and it's very frustrating because I use Skype to talk with customers, and it looks unprofessional when my calls fall every single time. my computer can also use wireless (which does not go down), but he's too unstable for my work.

  now on the error message I posted. I get this error in my observer of events in about 30 minutes until my ethernet goes down, so I don't know if they are interlaced or not, because I don't get any errors when my ethernet really crashes.

  Here's what I've tried so far without success:

  -temporarily disable the firewall and antivirus

  -updated driver for both my wired network cards and wireless (both were UTD)

  I don't know what to do because I've never had this problem before.

  Here is some information on my computer if that helps all:

  OS: windows 7 Home premium (x 64-bit)

  computer model: gateway DX4870

  Look on the side of the router and make sure that the DHCP lease time has not set to 60 minutes.  As a simple solution you can just assign a reserved DHCP or a static address to the computer (in the router).

  PS: You'll find the DHCP lease on the map with the command ipconfig/all command at a command prompt

  John

• PDC as a NTP server with no external link WAN

  A bit of a unique environment...

  Here's the background: R2 Windows Server 2012 (GUI) virtual (VMware, Hyper-V, don't think that it matters tho?)

  HIGHLY SECURE (No link whatsoever outside the network) environment which is currently in phase of tests .

  Small environment, then domain, DNS, and DHCP controller all-in-one...

  The issue is, this PDC must to also act as NTP server for the whole environment...

  Now, since there is no link with the outside world, I can not synchronize time with a server such as time.windows.com or pool.ntp.org time so I need to manually configure the time on DC1 and let members computers synchronize their time with mine, so we chronological consistent throughout the network, even if it can be turned off in regard to real-time.

  Sounds easy enough, but as my username suggests, I'm a total noob, then how?

  A few items of Microsoft (like this: https://support.microsoft.com/en-us/kb/816042) suggest that to set the internal clock as the source for our NTP server on the domain controller requires changes in the registry... I sincerely hope that as advanced as a 2012 R2 server should be able to something like that happen to without necessary to enter regedit.

  In addition, in the article above, will it work if my domain controller is a virtual machine, or it's only about physical machines?

  And once I have the task, the issue of the domain member computers comes to mind... the following thoughts come to mind:

  -Should I go into each computer only member and point manually to my DC to tell him that his also the NTP?

  -What about some news servers that join the domain?

  -Are there maybe a GPO, I can create this for me? And if so, how? (GPO Noob too = P)

  Thank you to troubleshoot a windows apprentice young power make it work and not get fired! =)

  Kind regards

  knowNoob

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Since the (all updates) update yesterday, I find one inactive (used only for vpn) network adapter waiting for DHCP Ip address. 1 minute. This should not happen.

  This adapter (or should I say windows) should not ask an IP address until it is in use. There is no difference if I disable it in Device Manager. I get the following error (ID 1001):

  Your computer not was not assigned a network address (by the DHCP server) for the network card with the address...    The following error occurred: 0 x 79. Your computer will keep trying... Since the server (DHCP).

  The MAC address is the MAC address of my "virtual" network card

  In the meantime my physical network adapter does not work. It seems windows is just to wait a response "who will not to pass" a DHCP server which unless I launch the VPN software is simply not going to work.

  I suspect that it is the result of an update that should not work this way.

  Any suggestion is welcome.

  Thank you.

  I would just add - it may be important for long-term understanding of the issue. In network connections, the VPN arrested projected map (still there in Device Manager). I see only the physical card. After removing both and reinstall the two becomes visible. The previously hidden map (vpn) becomes visible. It was not until the physical adapter has been reinstalled (logically). Personally, I have no idea why this I messed up. There should not be.

  Best regards, Dave.

• implementation of the Hosts file on the server for the entire network?

  I see a lot of information on how to edit the local Hosts file on individual computers. But, is it possible to edit a Hosts file and have effect throughout the network?

  We have a network of a little over half a dozen of Mac mini, who take their DNS information from another Mac Mini running the application server OSX (under El Capitan). This server is the primary DNS machine for the network. I want to implement a Hosts file for the entire network.

  Parental control seems to be broken in OSX El Capitan, so this seems like the best next to us, short option to buy some third-party service, which I prefer not to do.

  I think that dnsmasq installation on your Mac server and configuration of all your computers to use as your "DNS Server" will achieve what you want.

  See osx https://oracle-base.com/articles/misc/dnsmasq-for-simple-dns-configurations-mac-

  Why do you feel you must do this?

• PIX to function as an Ntp Server

  Hi all

  I ask you if the pix can act as an NTP server with software Version 7.0?

  Thank you & best regards

  Igor.

  No, the PIX OS 7.0 is still just a NTP client!

  http://www.Cisco.com/en/us/products/sw/secursw/ps2120/products_command_reference_chapter09186a008045277f.html#wp1484669

  sincerely

  Patrick

• Yellow! for VMware network driver after upgrade to server 2003

  We have an older Windows Server 2000 guest who was P2V sometime.  It is one of our domain controllers.   In the process of migrating our AD domain until 2008, I have tried to upgrade this server to 2003 our ad can be in 2003 as part of the move towards 2008.   Long story short, in order to upgrade to 2003 server, I had to remove the old Compaq Network Managment of the machine software.  This software was not in Add/Remove Programs, then I went to the manual way to remove hidden drivers, when still it did not work, I have deleted all entries in registry SEO Compaq network management.  I proceeded with the upgrade, but when the system has finished, the LAN connection is missing, and Device Manager has a yellow explanation point to the NIC for VMware Acceleraged AMD PCInet adapter.

  I recloné and resume the upgrade with only remove entries from registry for Compaq Network MGT.  Yet once, after an upgrade, the same problem appeared with the network card.

  I don't know how to successfully remove the Ghost for the Compaq when the software seems to not exist on the computer.  (nothing in Add/Remove Programs, nothing in C:\program files, start anything in the 'Programs' from the menu list.

  Once I get the error on the NIC card I can't fix.  I tried to reinstall the VMWare driver from the VMTools directory, but that still does not work.

  Not sure about Windows 2000, but IIRC the HP drivers can be removed trough the network card properties!

  Be sure to reconfigure the guest operating system to Windows Server 2003 in the properties of the virtual machine after the upgrade. I had probably also remove the NIC and add an E1000 NIC, which is the default value for Windows 2003 VMs.

  André

• NTP server authentication

  I'll put up the master NTP server on Catalyst 4000 series switch. I want to implement authentication between the server and the client. I have the following commands is not working.

  What's wrong with the commands below?

  Server:

  NTP-1 xxx md5 authentication key

  authenticate the NTP

  NTP master 6

  NTP max-associations 10

  Client:

  NTP-1 xxx md5 authentication key

  authenticate the NTP

  key to NTP server 10.0.0.1 1

  AV

  I think there are two separate issues here and they are not really related to each other. It is a question if your switch must be configured as master ntp. If the switch is configured as master ntp, then it will offer his version of time that it is authoritative or not (either correct or not). I think it is a bad idea and hope that this is not something that you did intentionally.

  The other question is why the switch is not hours of instruction from the marine server. It seems that there are several reasons why this can happen. It is possible that the NTP requests you are not to get on the server or the server responses aren't you. My guess is that it probably is, since the show ntp association does not show a reference to the server of the Navy clock. Or it is possible that the NTP response is you but there's not enough variability in traffic through the network switch is not able to synchronize with the server. I saw a customer network when it's a problem for a while.

  I would say the next step could be to debug ntp package and see if you send to the correct address and see if you have found answers.

  HTH

  Rick

• Can I use the same NTP server configured in the firewall to guard

  I configured the NTP server in my VCSC Expressway it synchronized correctly, but I'm unable to configured in my VCSC Gatekeeper with the same NTP server address that is configured in VCScExpresway.

  Please suggest

  Hello!

  You use in.pool.ntp.org. This isn't a single ntp server, there is a pool of servers,

  then you might see different ntp servers, and they can also change and sometimes

  It can also happen that yo will get a limit down.

  If I get him here, I have for exmple get:

  $host in.pool.ntp.org
  in.pool.ntp.org has address 113.30.137.34
  in.pool.ntp.org has address 119.226.101.131
  

  and a little later, I got:

  $ host in.pool.ntp.org
  in.pool.ntp.org has address 123.108.225.6
  in.pool.ntp.org has address 125.62.193.121
  

  In any case you want to configure multiple NTP server addresses.

  So, if you want to use this area (India):

  * You must configure these three host names as described here: http://www.pool.ntp.org/zone/in

  * See who works for DNS resolution (which may also be the problem here)

  * you have a suitable internet access

  * see that the firewall is open to 123 to any host on the internet

  * If you are not in India use a different area

  On the VCS under Maintanance > tools > utilities you could for example check if you can resolve DNS and traceroute/ping external hosts on network.

  The other option is to find at least 2 NTP servers you know and that you can use and set up.

  then you could lock the specific IPS in the firewall, otherwise it should be open to all.

  Its also not hard to set up your own server NTP, incidentally.

• TCP on PC server with the network interface has 2

  If I need to create a TCP on PC server with the network interface has 2 with a different IP address, for example 192... and 172... and the IP address of the client side is 192..., is there something I need to take care.

  Any suggestion, thank you.

  No, by default the server listens on all interfaces.

• Hyper V 2012 R2 corrupt firewallrule the name of the server for Remote Dekstop

  Hello

  I have currently installed Hyper v server r2 2012 proposes to test, but I have a problem with all the firewall rules Dekstop remote to connect to the server using remote dekstop I am force to disable all the rules of profile to connect. I'm downloading a few screenshots with my system info and problems that I currently have. Note: It is in the Working Group and am remoting to Win pro 8.1

  Here is a list of things ot, I've done so far without result:

  Reinstall the Hyper V Server

  Reconstruction of firewall rule for the TCP-IN Remote Dekstop (the rule was added but once again with the corrupt name)

  Rewrite of USB and reinstalling the server (the USB key is written for the UEFI system partition and formatted Fat32 GTP)

  Reset the bios

  There isn't any other firewall except those on the server that the network connection is directly from a router and it is not any firewall avable here.

  PS because the screenshot shows am not able to activate remote dekstop rule for TCP-IN and UDP-IN because the names does not and I even used allow netfirewall rule the current name remote dekstop am still unable to connect to the only solution is to disable the firewall, but this isn't an option.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• NTP server lag get higher

  Hello

  I installed the 2012 server in vmware esxi

  the server is a satandalone and is not a member of the domain

  I have configured the server to be a ntp client and synchronize time from an ntp server closest to you.

  When I check the offset of the time I get a 0.03 s

  and this result is good for my environment, but after some time the offset increase until it get 0.3 s

  What are the causes of the offset to change after a while and increase so high

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Policy update for several networks with specific DNS servers

  I have a network of medium size with 5 locations with different IP addresses. All the sites host their own DNS servers and connect directly through a dedicated VLAN access provider.

  Main site	10.1.1.1	255.0.0.0
  Remote site 1	192.168.100.1	255.255.255.0
  Remote site 2	192.168.101.1	255.255.255.0
  Remote site 3	192.168.102.1	255.255.255.0
  Remote site 4	192.168.103.1	255.255.255.0

  All sites can be managed via the main site, but have their own DNS servers on-site.

  My goal is to point all computers and devices on a new DNS server for their previous static assignment. (XP and later)

  My question is can I use GP or DHCP * for information push on each apparatus, this DNS server that makes site specific without having to travel to these places?

  Requirements:

  All devices of 10.1.1.1 10.1.1.2 to 10.1.1.4 change (old decom 2 k 3 Server)

  At each location of 192 DNS servers will have to point the secondary server to 10.1.1.4

  Handheld devices will use 10.1.1.4 as primary and 10.1.1.3 as secondary.

  Devices at each site shall keep their respective DNS server.

  * If I use DHCP to change the information on a per level of scope, I can use GP to force computers with locally defined static assignments update the static DHCP assignments

  Bonus: If someone can give me an estimate on how much traffic/band bandwidth network that it would create would be great because I consider well shift assignments as I am a business 24 hours a day.

  Hello

  I advise you to repost the question to the TechNet forum for assistance.

  http://social.technet.Microsoft.com/forums/en-us/home?category=itmanager

  Related topics:

  http://www.winvistatips.com/threads/push-new-scope-settings-from-DHCP-server-to-all-reservations.725644/

  How to use DHCP to provide routing and remote access with the additional DHCP Options Clients

  http://support.Microsoft.com/kb/232703/en-us

• CP 5225: Print server for HP Color Laserjet CP5225

  We have a HP Color Laserjet CP5225. The printer has USB connectivity. There is a network (RJ-45) port, but it is disabled.

  We want to get the printer to print directly through the network.

  The HP Web site suggests Print Server HP Jetdierct ew2500 (HP CP 5225 is in the printer compatibility list). However ew2500 is not available.

  Please suggest a different print server for printer HP CP 5225.

  You should be able to use any wired usb print server.  The server does provide a connection to the usb port on the printer so if you can communicate with the server via ip, then you just to load the driver and connect the prnter as a local tcp/ip printer.

• Unable to install the driver for the network printer, the reason according to HP's Service: MSIServer

  Original title: Error code: OX8004FF01

  While trying to download microsoft security essentials on a computer running Windows XP Professional with service pak 3

  I received a cannot install security essentials (OX8004FF01 error code)

  I removed all Norton parts from this computer and the firewall is turned on.

  So, what is this code and how to fix the problem?

  I am not able to install the driver for my network printer, is the reason according to HP

  Service: MSIServer

  Microsoft manufacturing

  Version: 0.0.0.0.

  The name of the HP printer file is: 100_228_PS_A10_02_Full_Net_enu_NB.exe

  Any help with these problems would be appricated: * address email is removed from the privacy *

  Hello

  What is the model number of the printer?

  Help with Microsoft Security Essentials issues, contact the Microsoft Security Essentials team. You can use this link to contact them.

  http://answers.Microsoft.com/en-us/protect

  For the printer problem, check these links and see if they help.

  Method 1: Refer to this link.

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003.

  http://support.Microsoft.com/kb/315346

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:http://support.microsoft.com/kb/322756

  Method 2: Install fixit from the following link and try to install the drivers.

  How to fix MSI software update registration corruption issues

  http://support.Microsoft.com/kb/971187

  Also visit these links:

  How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658

  How to install a printer driver locally for a remote printer in Windows XP: http://support.Microsoft.com/kb/282842

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows