diagnosis of the problem - unable to connect to the router

Similar Questions

• EA6700 - Unable to connect to your router SmartWifi

  Hello. I managed to connect to linksyssmartwifi.com, but still get this error trying to connect to my router outside LAN.

  Linksys Smart Wi-Fi was unable to connect to your router. This can occur if the router doesn't have Internet connectivity. Try to access the router again later, and if the issue persists, troubleshoot your router's Internet connection.
  

  I know that the router is online for you (can connect Wan) and I confirmed the email account during installation.

  Any help is appreciated. Thank you!

  Oops! Turns out that I do not have remote access on when setting up. EU local network connection using the account LinksysSmartWifi.

  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&VW=1&articleid=25854

• I am unable to connect to my router wirelessly to parents. I tried to reset the modem and the router and it still does not work.

  Presented labtop parents and can connect via ethernet, but still cannot connect to the wireless router. Ive rebooted both the modem and the router and ive also unplugged the power source. Help, please...

  original title: unable to connect to the wireless router?

  Hi Brandon,.

  What operating system do you use? (Windows 7, Vista, XP?)
  You receive any type of error message when you try to connect?
  What exactly happens when you try to connect?
  You receive an internet connection when you connect with an Ethernet cable?
  There are a few good troubleshooting in this thread. I suggest to look to see if it helps at all:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-to-a-wireless-network-Windows-7/734ecdef-99fb-4862-b63a-04cfa448cc06

• Unable to connect to my router wirelessly with Dell D410 running XP Pro using the pro/wireless 2915ABG card.

  I got the latest drivers, downloaded the last utility connection for the wireless card config, then switched back to wireless zero configuration.  All to nothing does not.  I use a router Netgear MR814 with WEP, which works very well with all my other wireless devices.  Have checked and rechecked the WEP key to make sure it was OK. And I even disabled access on the router control.  Everything seems to be correctly set, but whenever I try to connect, it is not.  Someone at - it any other ideas?  It would be very grateful.

  Hello

  1. do you have this setup already worked successfully?
  2. have you made changes on the computer recently?
  3. do you get an error message?

  Check to see if the problem exists in the boot. Configure the computer to start start clean and then 50-50 approach use to check, with which application, these files are associated with. Once you find the application I would ask you to uninstall and reinstall.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  We can also try to reinstall the WIRELESS drivers from the Dell website and check.

  I hope this helps.

• Wireless network problem unable to connect to Kodak ESP7 All In One Printer wireless. Windows 7

  Hi close baldy headed by trying to connect a Kodak ESP7 printer all-in-one wireless. The printer itself recognizes the wireless connection which is excellent but the does'nt of the computer. Whenever I try and print something an error message printer does not. I tried resetting the wireless router, is returned at the beginning and installed the software again, but no luck. I am on Windows 7 and the other 2 laptops that I have in the end work from home. Could someone tell me if I'm missing something simple, or would it be a problem with the printer itself. Thank you
  Phil

  Hello

  Configure the primter with a static IP address to connect diretly to the router (read the printer manual).

  Then using the Kodak software, install the printer driver and utility management, on each computer that requires to for use.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows 7 wireless connection problem: unable to connect to my home network

  Hello

  I just got a Dell laptop that is running Windows 7.  However, when I try to connect to my home network it impossible apperantly.  When I select "Troubleshoot Proplems" I get "Troubleshooting cannot identify the problem."

  I also already checked the pit of the Wireless Device Manager device.  It is activated and works perfectly.

  I know that the network is enabled and works because I'm typing this message on my desktop wireless capable of Windows XP.  In addition, my roommate is able to connect to the router and 'surf' the internet on their laptops.

  Therefore, I must assume that this problem is due to something in Windows 7.

  Hello Geoffrey.

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• Re: Satellite L350 - unable to connect to my router

  I wonder if anyone can help.

  My portable Satelite L350 will connect to each wireless network, I met with the exception of my house. This is a Buffalo wireless router and other laptops will connect to it no problem, it seems that my laptop and router buffalo communicate with each other.

  Anyone got any suggestions?

  Hello

  If you are looking for wireless networks in range you can see your Buffalo router?

  Make sure you are using the same standard wireless to the router and the laptop, for example, 802.11 g or draft N.
  On the laptop, you can check this in the properties of the card WLAN (Device Manager).

  If you use Windows Vista, you must disable the functionality of the energy-saving WLAN card. You can find in power management.

  Have you tried another laptop on your router? Maybe the router causing this problem and not the laptop

  Welcome them

• Satellite A300 - unable to connect to my router

  Hi all

  I have a Satellite A300 and a Satellite A300D. Since a year im dealing with a problem and eat my heart. I have problems to connect to my router, for the moment I have a Netgear ADSL modem router wireless. When I am looking for a wireless network it seems to find the network, but when I want to connect I get the message network is no longer in the area.

  The distance between my modem and laptops are 3 meters in an apartment, even when im sitting on my router :-) this is not not possible to connect to the wlan. Tried to connect without any wep/wpa encryption, no effect. Played with communication channels @ the properties of the wireless network adapter and the router, but this isn't a solution.

  Before I got the Netgear, I had a Linksys / Sweex / Cisco pro / router Wlan from HP. I tried all brands of wlan, with all routers routers of this I had the same problem.

  Frustrating him of is that I can connect to my neighbors without any problem, but not my own network.

  Anyone having the same problem or know a solution?

  Have you tried to update the WLAN driver on two laptops? You can find it on the Toshiba site and I would update the BIOS too:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  What operating system do you use? If you use Vista, you must disable the WLAN to save energy card. You can do it in Vista Power Options.

  You use the same standard WiFi on your laptop as on the router? For example I mean project. G check this!

  At the moment it is not easy to say what is the reason for this, but I hope that I could help you a little. :)

• Unable to connect to my router satellite U505

  I'm having a problem with my Wi - Fi connection. I got new service installed at my place, with a password, every time that I try to connect after entering the password and details my lap top can't connect.

  My wife lap top is fine. My lap top connected successfully to all net Wi - Fi work in airports and hotels. I only have this problem in my house. Previously, I use to have the different internet provider and it was perfectly connected with no problem at all.

  My lap top is Toshiba Satellite U505 model. I tried to use different browsers Google chrome, fire fox, Explorer same result. One more thing when I connect my laptop through the barbed wire to the same router it works fine.

  Any help will be appreciated.

  > I'm having this problem only in my house. Previously, I use to have the different internet provider and > it was perfectly connected with no problem at all.
  There is no problem with your laptop if I understand correctly your Pentagon. I mean WIFI card work properly and described question isn't directly related question of Toshiba.

  Of course, there is a problem with the settings of the router. You have now a new router?
  Try disabling the WLAN security for a short period of time just to check if your laptop connects to the WIFI properly.

  Please post comments.

• Unable to connect to my router wireless - Satellite A200

  Hello

  Can someone help me to connect my laptop to my wireless router? He used to work, but note accept the security code that my other pc is running without problems. The laptop connects to other unsecured sites and is ok hard wired to the router. I tried re enstating the router on the laptop but not joy.

  Anyone got any ideas I can try?

  Thank you

  Hello

  Are you sure you used the security code? Maybe do you a misspelling, so I would try to check it again.

  In addition if you use DHCP on your router, your laptop get an IP address?

  By the way: Toshiba laptop you have and you did update the driver WLAN?

• Unable to connect encrypted wireless router.

  System:

  XP Professional version 2002 SP2.

  Intel wireless wifi link 4965AG.

  Here's my question:

  At one point, the wireless router had no security encryption and I could access without worries.

  In my absence router security has been formatted and now I can't access. Located keys and input for connection - no joy. Router error message is out of scope (showing full signal strength - I should mention that 3 others in my office can connect without a problem and I have no problem connecting to my home wireless with WEP encryption).

  Open 'show the wireless connection' then open advance settings.

  Click on 'general tab' and make sure that the IP address and DNS have the value 'Auto '.

  Click on "wireless networks" and manually add the router. WPA2-personal network authentication and AES data encryption (this information has been lifted of my colleagues who has no problems PC connection). Therefore, I set up my PC as WPA - PSK (no option for WPA2-Personal) and AES and enter the correct key.

  I checked the box 'automatically connect when range' and approved my way. Still no connection. Clicked on signal connect manually and get "Please wait...". "but nothing happens - no error either.

  I tried any variation in the encryption of data and authentication and verified/double concievable checked the key but nothing helped.

  DOE anyone have ideas?

  See you soon.

  The problem is that your network is WPA2 and your PC does not support WPA.

  You must install Windows XP SP3, which adds support for WPA2.  See this article:http://support.microsoft.com/kb/322389

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• Satellite L300 - unable to connect to my router

  Hi guys,.

  I got this laptop a few days ago, everything works as it is supposed to be except for one thing, I try to connect to my wireless internet signal and it picks up the signal itself as a strong signal, but when I go to enter my WEP it never connects. I can't actually connect to the signal.

  I have another laptop which I can easily connect to my wireless signal.

  I have a wireless cable modem so it Wouldnat be my internet service,.

  Someone at - it ideas? Purchase of an additional Wi - fi adapter would work instead of using the built in Wi - fi? Also, the laptop came with Vista Home Basic installed.

  Any help would be greatly appreciated.

  Thank you guys.

  Hello

  Can you connect to the router, if you disable WEP encryption?
  In addition, WEP encryption is not safe and can be cracked in a few minutes, then you should choose another encryption WPA or WPA2.

  In addition, I would recommend updating the driver WLAN. On the Toshiba site, you can find the most recent version.

  What OS do you have? If you have Vista try disabling the WLAN card feature in Vista Power Management for energy savings.

  Good luck!

• Equium L300 unable to connect to my router using wireless

  I have a laptop Equium L300 and can't connect to my router using the wireless option.

  I am told that the wireless feature is disabled on my pc but the switch on the front is activated.

  Can connect with the cable is the wireless.

  Anyone know what this could be?

  Try pressing Fn + F8, only the activated Wifi become?

  In Device Manager, the wireless device is reported to work ok?

  Try a BIOS update as well.

• download problem 'Unable to connect to the server' iPad folio

  Too, I'll have a problem displaying the folios in Adobe Content Viewer v32.

  Other members of the team had trouble downloading the folio and received an error message "can not to connect to the server at this time...". "

  My diagnosis:

  
  

  1. I downloaded the folio to my iPad, no problem for me.

  
  

  2. their problems after update, so I've updated to v32. Then I started having the same problem.

  The download should start, the status bar it would be 1/3 diameter, will be first to go back to 1/3, then get to the error.

  
  

  3 think necessary v32 iOS8, took me to update that too. Same error message.

  
  

  4. I have read on this forum on the problems as those creating applications have been seen and the fix was on the server.

  Thinking the folio was to be reissued to work with v32, I deleted republished folio to folio online, downloaded in the folio again, producer and then tried to download it. Same error message.

  
  

  I'm out of ideas. The only solution I have is "no update". Looking for another solution.
  

  The team continued to investigate the matter last weekend and have identified the root cause and strive to solve the problem. There is a potential delay which can be met with the largest networks of content and/or slower.

  I don't an ETA have not yet but will keep you all.

• driver problem, unable to connect to the internet

  Hello, I have an Asus x550la, 64-bit Windows 8.
  When uninstalling unnecessary programs, I accidentally chose the Atheros Qualcomm program to uninstall, and during the uninstalation, I realized he was a driver and cancelled the uninstalation during the unisnstalling process. After that my internet never worked again, nor my ethernet, my connection says its stable, without has is limited, but it won't always connect to the internet. I've tried restalling this driver, update, and it never works. When I solved my connection problem he says this is a problem in the driver, and sometimes it is said that it is fixed. I don't really know what to do.
  PS: my laptop is Japanese, but with the language and region, in English and already changed America but Japanese characters still appear in some facilities, but I can read Japanese. The thing is that I don't know if the problem of update is due to computer being compatible Japanese

  GH

  I suspect that you have damaged more than internet

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files