Dictation doesn't work after sleep

Similar Questions

• 15 - ab004nc: HP Pavilion 15 (15-ab004nc) - 3160 Intel doesn't work after sleep

  Hello.

  I have laptop HP Pavilion 15 (15-ab004nc) with the card wireless Intel 3160 and running 10 x 64 windows.

  Whenever I put my laptop to sleep, then wake it up, the wireless is dead. There is the Red Cross at the bottom right on the network card and a Wi - Fi connection can not be turned on.

  I tried solutions:

  (1) properties - wireless adapter - device manager - power control - uncheck the box 'allow the computer disable this device... ". »

  (2) remove the current driver (auto downloaded by Windows 10) and install the driver of HP (http://ftp.hp.com/pub/softpaq/sp72001-72500/sp72159.exe) drivers site

  (3) remove this driver and replace it with the driver from the installation site with drivers for Intel 3160.

  (4) maximum - wireless - performance even on battery power options

  (5) remove all the network related drivers in safe mode, reboot and installation driver HP for this laptop (identical from the point 2)

  The laptop is useless in this State.

  When I wake up from sleep/hibernate, wifi can not be activated. I tried to disable and re-enable it in Device Manager, but it does not help either, the wireless adapter is dead until I restart the system. After starting, the wifi works like a charm until the next sleep/hybernation, then it died again.

  Any kind of help would be great.

  After one stop wireless I have let it run as a windows network tool diagnoses and he told me that the switching between wifi and no.-wifi button was "no wifi".

  The funny part is that this model of HP laptop is not a switch wireless button, only to airplane mode, and is not the same thing.

  If I have the system is quite confused and this is probably the problem with keyboard, turns out I was right.

  I installed the driver of HP wireless button (even if there is NO button on the device wireless switch) and now everything works as it should.

  TL; Dr: install the driver of HP Wireless button and everything works fine.

• Satellite M30X: Screen doesn't work after sleep mode

  I own Satellite M30X (model) after I left the laptop on while awhile, the computer went on standby to fashion. When I turned it on, the screen does not work, everything else is ok. I use the external monitor to the laptop. Everything seems to be in the order outside the screen. I did a system recovery and still the same problem. I don't know if it's a hardware or software problem.

  I know the screen works, because you can see roughly. It seems to me that the screen is always on standby.

  Is there anything I can do to fix this problem?

  Hello

  @marc.andres: If you n t no contrast on the screen have so try to use the FN + F7 key

• Re: Satellite A50 - keyboard doesn't work after sleep

  I have a problem with my laptop.
  When you load windows xp keyboard does not work.
  Keyboard works again if you put it to sleep the laptop and then you reboot.

  What is the problem? Help me please and thanks in advance.

  I have never heard of this issue, but have you tried an external keyboard? Check it!

  What's your Windows up-to-date with all Service Packs and patches?
  I doubt that s a hardware issue and in the worst case, you must reinstall.

• Display MX30 satellite will not work after sleep or resume - SOLUTION implementation

  Below I give an answer to this question asked by Eddy_Stock in 2006. I would like to thank and can't get in touch with.
  HIS answer is below and I hope it helps someone who has the same problem... wow... cured!

  Re: Satellite M30X: screen doesn't work after sleep mode

  I had the same problem with a satellite A100. I did the following:

  1. go in Control Panel
  2. in the system select Classic view
  3. go to the Hardware tab
  4. Select Device Manager
  5. open the 'USB bus controllers' (via)
  6 double-click on USB root hub
  7. Select the tab: "Power management."
  8 deselection allow the computer to turn off this device to save power
  9. my computer has several USB root hub. I repeated at 07:54 for all
  10. I rebooted the computer, but do not know if this is necessary.

  After that, the problem was gone. Enjoy

  Thanks for sharing this info with us

  I think that you thread and the solution could help other users with similar problems

  Thanks again

• Mailto doesn't work after updating FF 42.0

  Mailto doesn't work after my last update. The entrance of mailto is not under Tools > Applications and there is no drop-down list to add an entry. My default e-mail program is Windows Live mail.

  Hmm, mailto certainly should not be missed.

  Sometimes, the file that stores these actions of the Manager/download application is damaged. As it is difficult to change, when there is a problem, we offer usually when you rename the file and allows Firefox to rebuild the Windows registry. Who cannot help if mailto is missing from the registry, but I think it's worth a try:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Break while Firefox finishing his cleaning, then rename the mimeTypes.rdf to mimeTypes.old (or another name of your choice, in the case where you decide to roll back this experience).

  Launch Firefox back up again and return to the Options page to specify your preference. Mailto appears once more?

• DVD player doesn't work after installing SP3 for Windows XP.

  DVD player doesn't work after installing SP3 for Windows XP. That it disappeared from "MY COMPUTER". Device Manager sees it, but there's a yellow exclamation mark over it. See the BIOS of the motherboard and it still works in the BACK. I know SP3 is a collection of updates, but I'm not sure that is my problem. I suspect it's one of the more recent cause I have Windows automatic updates is turned on. Thank you.

  Hello Superhornet142,

  Thank you for your message.  Click HERE and run the FixIt!  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• Touchpad gestures stop working after sleep Windows *.

  This is the best advice ever! I tried and immediately was saved! Thank you!!

  For laptops Asus on Windows 8 - actions no longer work after sleep on touchpad
  

  
  

  Manual method

  • Open the Task Manager, look for the "Asus Smart gesture Center" process Complete the task.

  Script method

  • Script: Create a .bat somewhere file with the following code:
    Taskkill /IM AsusTPCenter.exe /F

  When you run the bat file, it will kill the process.

  Both: when to end the task, that it seems that the other process from Asus running it will detect it and start it, allowing the multi-doigt touch again.

  To make the batch file:

  1. Open Notepad and copy/past this command:Taskkill /IM AsusTPCenter.exe /F
  2. Then click on save as and type .bat (remove .txt)
  3. Replace all files . the drop-down list and click Save

  That's all! Whenever the problem appears, double-click the file and it will fix it!

  Thanks to Teknokraten @ superuser.com for this solution.

  I am so grateful for your help! I had the same problem that my touchpad stop working after the mode 'sleep'. I had the problem over the years and no one could help me. And it worked! So thank you very much!

• HP Pavilion: Bluetooth doesn´t work after installing Windows 10

  Hello

  Doesn´t Bluetooth work after I upgraded my OS to Windows 10.

  Can someone help me please?

  JimWieder

  JimWieder

  Thanks for the reply and the information updated. Check the link to your model and you will keep. Thre is no specific driver for Windows 10 for this computer for now, but there is a Bluetooth for Windows 8.1 driver.

  I could start with the HP Support Assistant, as I mentioned and see if she can find something for you. It is useful to have, as it will seek new pilots as part of its function.  If this does not work for you, then you can try to install the driver Windows 8.1 of the support page.  Broadcom Bluetooth driver

  Try to install such what, first and then Bluetooth test. If after the test, you still have trouble with the Bluetooth does not, try the method of this other link I posted on how to install a driver using compatibility mode, and then see if it will work for you.

  Here are other pages that can be useful for you in troubleshooting and testing, and also that of Microsoft.

  HP computers - using devices (Windows, 10, 8)

  HP computers - understanding and troubleshooting Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  Connect to Bluetooth devices - windows.microsoft.com

  I hope this helps.

• LAN not working after sleep

  When I turn on my computer,
  after sleep mode it can not connect
  to the internet via LAN, up to what I
  Restart the computer

  Don t know what laptop you have, but compare the BIO son you laptop computer with the version of the BIOS on Toshiba page.
  If there is a newer version try to upgrade the BIOS.
  But be careful. Don't forget that you have downloaded the good BIOS and you are using the correct procedure to update the BIOS.

  Incorrect BIOS may damage the ROM or the Board of Directors.

• L540: Microphone is not working after sleep 10 Windows

  I'm new in the thinkpad family and I recently had a L540.

  I decided to put my system with W10. My problem is that of the object.

  When the laptop awake the microphone does not work. It is recognized by Windows, but the cannot hear anything.

  I tried to reinstal the drivers or dissable the unit, but nothing.

  It only works after the restart.

  Any suggestion?

  Thanks in advance.

  Problem solved with the BIOS update!

  Thank you very much.

  Bests.

• my motion eye Web cam doesn´t work after I installed windows7 :(

  Hello. I installed windows7 on my vaio VGN-CR510E and my motion eye web cam doesn´t work: (the thing is I tried to download it from the web site of vaio but he know that my laptop is only compatible with windows vist if it can´t be installed:(ce que peux je faire maintenant?))
  I looked the website support windows7 and it offers a few upload for webcams but he then asked for a description of the cam and there are a few select in... I Don t know what to do, please help me

  @Viktoria1986
  Hello
  Download driver webcam Sony site for your assistance model. Link is here .

  Try to install it in Vista compatibility mode. All information on this subject, you can find here .

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• Dell XPS One - sound doesn't work after coming out of sleep

  My new DellXPS One audio (office) is not working when I recover mode standby. I got to go to sleep after 10 minutes. When I wake up, the sound does not work. I check all the sound settings, (for example, check if it has been cut), but I don't find anything wrong. The speaker bar shows me that it's playing sound, but nothing's come out of the speakers (internal - I have nothing plugged into the speaker port). This problem can be solved by restarting my computer, but it's irritating if I do it all the time.

  I'm in Windows 8.

  Any ideas?

  I found that the solution was the same as what Kelley says above after the support call.

  Make sure all audio drivers are loaded and the problem goes away.

• Satellite Pro M70-275: screen doesn't work after waking up from hibernation.

  Hello

  I sometimes encounter this problem: when starting the hibernation (not sure of the English term, although that. "light sleep" mode in WinXP...) the screen turns on again. The operating system seems to be up and running again, but I really don't know because I do not...
  Sometimes it works fine, but I would like that it works all the time.

  Any ideas?

  / Johannes Ogren
  Gothenburg, Sweden

  Hello

  Will there be the same situation after waking from sleep mode?

  James is right. Usually, this kind of questions is fixed with the new version of the BIOS, but you can also try installing the latest version of Power saver utility.

  If anything maybe you must reinstall the OS using supplied recovery DVDs.