Did not look up the definition in the Console Design

Similar Questions

• I read the excellent instructions, but cannot locate the green arrow to start the download! I did not accidentally remove the arrow, because he was never

  I went on the Mozilla site to download to my Mac. I read the excellent instructions, but cannot locate the green arrow to start the download! I did not remove accidentally the arrow, as it was never there to be seen. I use Safari and don't have Firefox on my MAC (to my knowledge).

  Thank you

  PS: I clicked on the 'automatically add' and downloaded the file, but when I tried to open it, I get the message "Safari cannot read this file. Cool, huh?

  See how to install Firefox on Mac.

  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac
  • http://KB.mozillazine.org/Installing_Firefox#Mac_os_x

  Open the Firefox disk image file and drag the Firefox program into the Applications folder on your hard drive.
  Do not double-click the Firefox to run from the disk image, but instead, drag it out of the DMG file.

• I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

  I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

  Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

  That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

  Good luck!

  =======================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I configure xbox 360 on windows XP, all instructions are for Media Center which I did not and asks the key code.

  Windows XP and using the Xbox 360!

  How can I configure xbox 360 on windows XP, all instructions are for Media Center which I did not and asks the key code.  I don't have media player. I received a key to the xbox code, BUT Media Player do not ask for it? My wireless works fine.  XBox works very well. Yes, I know that I should upgrade to Windows 7 but until my budget allows, is what I have.  Thank you.

  Try this link for XBox: http://social.msdn.microsoft.com/Search/en-US?query=XBOX%20on%20Windows%20XP&ac=3

• 4 usb ports - this device is disabled because the firmware of the device did not give him the necessary resources. (Code 29)

  m facing a problem with hub 4 ports usb of my... When I connect usb hub my with my usb keyboard and mouse, and then the lights of the suite to get devices but they doesnot work... and the error message shows... I checked in Device Manager and I got the message details which are given below.

  Device status:

  This device is disabled because the firmware of the device did not give him the necessary resources. (Code 29)

  driver version:

  6.1.7601.17514

  Please help me... Thank you.

  Hello

  In the Device Manager - right click on the device and Uninstall - when complete reboot.

  Check in the Device Manager to see if the device re-installed. If it isn't action - Scan for
  hardware changes.

  Also check the BIOS - Setup/settings - often F2 for system start - make sure that the USB port
  is activated. Check with Support from the manufacturer of the system/motherboard, their documentation online.
  and ask in their forums.

  How to fix error Code 29
  http://pcsupport.about.com/od/errorc/a/code-29-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows service error: "error 1053: the service did not respond at the beginning or".

  Hello

  I had created a Windows service to start and stop a Tomcat server. Whenever the Tomcat server works with Multi threaded items and if I try to stop the Tomcat using the Windows service I get the following error, "error 1053: the service did not respond at the beginning or".
  application for review in due course. "

  I can't change the value of 'WaitToKillServiceTimeout' as my services are running on the client computer. Y at - it any other way I can do windows services to expect my Application Server series of all threads and stops.

  Kind regards

  Amina

  Hello

  I suggest you to ask your question in the Microsoft TechNet Forums: http://social.technet.microsoft.com/Forums/nl/category/windowsserver

  I hope this helps.

• I downloaded Adobe Creative Cloud and asked After Effect.  They received my payment, but did not send me the activation code.  Where can I find it?

  I downloaded Adobe Creative Cloud and asked After Effect.  They received my payment, but did not send me the activation code.  Where can I find it?

  Hi Dawud,

  You can follow the article: sign activation, or connection errors. CS5.5 and later, Acrobat DC that will help you get this issue fixed.

  Let us know for any additional questions.

  Thank you

  Yann Arora

• I bought 13 PS elements and did not know that the Windows Vista operating system is not supported by this version.  How can I exchange the PS13 bought for a version of Photoshop that supports the Windows Vista operating system.

  I bought Photoshop elements 13 and did not know that the Windows Vista operating system is not supported.  How to exchange the 13 elements of Photoshop for a version of Photoshop that supports the Windows Vista operating system?

  Adobe does not sell older versions of their software, the best you could expect if the software will not work on Vista is to get a refund.

  Please see return, cancel or Exchange an order - Adobe

  http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

• tab KVM and vm is not available in the console kvm the Mmic

  Hi guy,

  Nice day!

  Today, I spend all day looking for the solution to this, but it was a bad day for me. I have access to the server cisco UCS 220 M3 Mmic and when I clicked the button on console kvm on the page group MMIC, the kvm and vm tab does not appear on the console kvm page. When I clicked on the virtual media in the menu, it's only to create image and enable vm media, there is no "Add images" option available for me to download the ISO image of vmware on the server.

  I tried to update the firmware for MMIC and BIOS, but no luck for me. Grateful if someone can help me with that!

  Attached is the retail version MMIC to share with you

  Thank you

  Rabah

  When you click on activate do you see a check mark next to it (see attached screenshot)?

  Try to do a cycle of the power of the box by removing the cables for power for about 3 minutes.

  Have you tried different computers?

• Could not start the console design

  Hello
  I installed successfully OIM 11 g and that you have configured the IOM server and console Design, I'm still can't start the console design as well as the server of the IOM on the 14000 thousand port. In fact, I see no error in the configuration. Can someone please suggest me a solution?
  Thanks in advance for the help.
  
  Thank you and best regards,
  Prasad

  Restart your server once and check...

  not even check the listening port number-> environment-> servers Weblogic managed server

• Change the DB connector via the console design

  Hello
  
  I installed the DB connector with the GTC feature in IOM 9.1.0.2. No change is required for reconciliation and it works very well, how ever, I need to reach my own adapter for the provision of a new user. Is it well if I'm going to change the definition of process via the console design, since Oracle and Oracle support documentation we ask is not to change the connector through the console of design? In addition, this connector can be exported and imported as the rest of the connectors or what I create in each new environment?
  
  Thank you
  PETREA

  It will work, but if you redefine the GTC connector modifications will be overwritten.

  On the side of the support of support for changes to all of the artifacts created by GTC varied per person support and time. It is not officially supported (most of the time).

  Best regards
  / Martin

• How to open the console design

  Hello friends am new on oim 11g
  I just finished with the facilities (wls, IOM, etc.)
  I created a user with connector gtc (only reconciliation) now I want to generate Email user id based on his first name and family name
  people me to go console fo design, suggesting how to go to console design and generate email identification.
  
  Please help me with the above query
  
  Thans in advance

  Use the following steps to create a file wlfullclient.jar for a client application to JDK 1.6:

  Replace the directories in the server/lib directory.
  CD WL_HOME/server/lib
  Use the following command to create wlfullclient.jar in server/lib directory:
  java-jar wljarbuilder.jar

  Now copy this file jar to the Oracle_IDM1/designconsole/ext folder

  After that, go to the folder Oracle_IDM/designconsole

  and run the xlclient.bat file, it will launch the console design.

  HTH

• The operation did not complete because the disk management console view is not updated.

  Disk title management error: Windows 7 original by adding a drive letter
  Well, I don't know why this is happening, but if I try to add a disk to my windows system, it will not automatically add a drive letter, but it will add a drive letter to my USB and USB external drives without problem. It's just when I plug it in sata he's going all wobbly. I see the HARD internal disk in disk as a disk, but windows disk management Refuses anyway shape to add a drive letter, even with diskpart automount enabled. This is the error I get when I try:

  "The operation failed to complete because the disk management console view is not updated. Refresh the view by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »

  Absolutely nothing works. I tried Diskpart, acronis, AOMEI, EausUS, chkdsk, sfc/scannow, Microsoft fixit. Nothing works to get the drive Manager to add a drive letter to an internal HARD disk. Like I said, sticks and USB drives are no problem. I looked all over Google and I have not seen one solution to this problem short of a total erase and start again, and at this point, I'm not be done with everything I installed and might have to reinstall.

  I have other systems that do not have this problem. Just this one windows 7 install x 64. Can anyone shed some light on why this happens and how to fix it or if there is even a fix for it.

  Thank you

  Methadras

  Just to follow and finish this, the old MAIN drive has had some problems and was

  continues to worsen, it ends up by crashed.  scannow revealed some Windows system

  Files were corrupted and could not be repaired.  After the crash, I used the blank hard disc 500 gig

  and did a restore of the system since the disks created with the purchase and restored the system to

  "DAY 1".   Yes all the data and installed programs are missing, but I reinstalled my software.

  Adding external or internal disks worked without any problem now.

  I created a Windows 7/64 system repair disc.

  I created an Image of the system.

  I have a backup plan.

  I do the scheduled backup.

  I learned a lesson...

  Joe_T45

• I bought a terabyte of storage made this not carried over to the next month if I did not use all the storage?

  I bought a terabyte of storage a month and now I have only 5 GB, because I did not renew the terabyte of storage. Is the amount of staorage I haven't used postponed to the next month?

  As long as you keep paying the monthly fee, you keep the storage that has been purchased. If you are unable to renew next month, then you lose the additional storage space. It does not.

• My office has been reset to the factory settings. I am enrolled in my sync account, but my favorites that are on my laptop, did not came to the top. Now what?

  I was fortunately sync-ed a year betweem my computer laptop Mac iBook and desktop HP - a lot of bookmarks - I am a student. My office had a small problem and I got it clean and reset to the factory settings. I'm now creating upward. I installed Firefox and made Google my default search engine. Then I logged in sync - no problem (even email, password... I wrote it!) I clicked sync, but my favorites are not come to the top. I closed Firefox and re-opened, but still no bookmarks. I looked at the settings and everything is checked. I wouldn't change anything. What Miss me? Thank you.

  Both devices use new synchronization and more importantly on Firefox 30.

  If you you don't need the synchronization of the former, and even if you use the same address as used for synchronization of the old all should operate under the new synchronization.

  I think that the new synchronization drops devices that have not synchronized within the past 21 days.

  Former site of Firefox Sync: new Firefox Sync https://account.services.mozilla.com/ site: https://accounts.firefox.com