Differences in the editor to compare between JDeveloper 10 and 11

Similar Questions

• When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

  Original title: fingerprint digital mapping

  When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

  I tried the fix (http://support.microsoft.com/kb/890737?wa=wsignin1.0) without success.

  Any ideas?

  Hello

  Have you tried to reinstall the fingerprint reader, as mentioned in the previous post article?

  If your computer is on a domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:
  Windows XP IT Pro Forums
   
  For more information, see the articles:
  Understand and configure the Welcome screen and the classic logon screen
   

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Compatibility of the presets to export between CS5.5 and CS6?

  I have a ton of custom presets that I have developed over several years. I tried to import in CS6 copying presets custom from here:

  \Users\ <user_name> \AppData\Roaming\Adobe\Common\AME\5.0

  here:

  \Users\ <user_name> \AppData\Roaming\Adobe\Common\AME\6.0

  I can see the presets custom in the SOUL, but only SOME of the presets in the format/preset export settings of Premiere Pro CS6 boxes. for example AVI appear but not the presets for H264 or Windows Media formats etc. (they do not appear).

  The presets are incompatible between CS5.5 and CS6 for some formats (maybe there are new parameters that were not in the old version)?

  Thank you

  Paul.

  Hi Paul,.

  Some of your CS5 presets are compatible, some are not. There was enough significant changes to several of the encoders in CS6, data contained in the old presets are more correctly. I can't remember full on top of my head, but Windows Media permanently changed. You will need to rebuild these presets from scratch.

  A confusing area is in CS6 SOUL, we have a new encoder H.264 and H.264 Blu - ray, as long as the older encoders that are now marked (legacy) H.264 and H.264 Blu - ray (Legacy). (For the record, MPEG4 has also falls in this category.) If you import old settings preset for these formats, they will be added to encoders of legacy, but not the new encoders;

  Rather than copy and paste files predefined in the folder, I suggest that you use the import function (under the new Preset menu or the button in the new browser built-in) to add the files to SOUL CS6. You should get a warning appropriate via this method if the screening is not compatible with all encoders, rather than silent failure occurs when you place them in the folder.

  -= TimK

• Comparation between database XE and 10 gr 2

  Hello everyone.
  
  I want to compare the differences between Oracle Database XE and Oracle Database 10 G.
  
  I guess that would be a document where this comparation is made.
  
  Can someone send me the link where it is?
  
  Thanks in advance and greetings to all.

  selezeus wrote:
  Hello everyone.

  I want to compare the differences between Oracle Database XE and Oracle Database 10 G.

  I guess that would be a document where this comparation is made.

  Can someone send me the link where it is?

  Thanks in advance & kind regards to all.

  Now, it is not such a document for 10g and XE on the Oracle Web site. They have updated the document to 11g.

  I found one on the net, this is a PDF document, and it's for 10g:

  http://software.bestcom.com.tw/down/dwon_file.aspx?file=20070808145418ABKwQ.PDF&filetype=9&DC_ID=9

  Best regards

  Grosbois

  -------------------------------------------------------
  If you answer this question, please mark appropriate as correct/useful messages and the thread as closed. Thank you

• Problem with transmission of the data in table between a driver and a method.

  I'm having a problem with a project for school. We want to take the data in a table, we create in our driver, pass it to the method, do something for her and return the data to the driver. Well, I still get the same error message and after looking at dozens of sites, it seems that I think that I have the correct code... but I still get the same error message. Here is the error message that I've been doing.
  * ola1driver.java:35: get() in ola1method may apply to (char [] [])
  x.get (Dar);
  (upwards arrow pointing between x and get) *.
  
  I'd appreciate any help I'm leaving research to simply looking at my code to try to find the error. My wife things I'm going nuts at the moment.
  
  Here are my two files, the first is the driver and the second method
  
  Take a 2D array and send the data to a method, and then put it back
  import java.util.Scanner;
  class ola1driver
  {
  Public Shared Sub main (string args [])
  {
  Entrance to the parser = new Scanner (System.in);
  ola1method x = new ola1method();
  Char [] [] dar = new char [10] [100];
  char dat_input;
  
  Set up the loop at the entrance a table of 10 x 100 with data imported from a dat file
  for (int i = 0; i < 10; i ++)
  {
  for (int j = 0; j < 100; j ++)
  {
  dat_input = input.next () .charAt (0);
  Dar [i] [j] = dat_input;
  }
  }
  Send the array to the method and displays the original table to compare the return data
  x.Set (Dar);
  for (ip int = 0; ip < 10; ip ++)
  {
  for (int jp = 0; jp jp; < 100 ++)
  {
  System.out.printf ("%n", dar [ip] [jp]);
  }
  }
  
  To get the data of the method and then print the data in the table opposite
  x.get (Dar);
  
  for (int r = 0; r < 10; r ++)
  {
  for (int c = 0; c < 100; c ++)
  {
  System.out.printf ("%n", dar [r] [c]);
  }
  }
  }
  }
  
  Now the method;
  
  Method to receive a 2D painting, reverse the data and then put it back
  class ola1method
  {
  Char [] [] ar = new char [10] [100];
  Char [] [] rar = new char [10] [100];
  
  public void set (char [] [] ar)
  {
  / * To reverse the entries in the table
  to prove that real return
  data was transferred between the driver
  and the method * /
  IR int = 0;
  for (int i = 9; I have > 0; i-)
  {
  for (int j = 100; j > 0; j-)
  {
  int jr = 0;
  RAR [ir] [Jr.] is ar [i] [j];.
  Jr ++;
  }
  
  IR ++;
  }
  }
  Return the data to the driver
  public char [] [] get()
  {
  return of rar;
  }
  }
  
  Published by: Seamus on February 20, 2011 08:25
  
  Published by: Seamus on February 20, 2011 08:26

  Seamus wrote:
  I thought that I sent my method by using the x.set table, and then by calling the reversed with the x.get table.

  x.Set (someArray) in fact to 'send an array to the method '.

  And if x.get () is declared to return an array, then, Yes, it indeed 'retrieve a table. "

  However, these are two completely different methods. The get method doesn't know something on the table sent via the set method unless the game puts a place who knows himself. For example, something like this:

  public class X {
    private int[] arr;
  
    public void set(int[] arr) {
      this.arr = arr;
    }
  
    public int[] get() {
      reverse arr and return it
    }
  }
  
  public class Main {
    public static void main(String[] args) {
      int[] arr1 = {1, 2, 3};
      X x = new X();
      x.set(arr);
      int[] arr2 = x.get();
    }
  }
  

  However, this seems a bit unusual. It is not clear from your initial post, but looks like it is supposed to be a single method that takes the array and it reverses. If so, you could either simply invert the table and returns nothing, since the variable of the appellant and the parameter of the method will all be pointing to the same table object, or you could return a reference to the table that you have received and reversed, or you can copy the table, reverse the copy and return a reference to that.

  I don't know what your needs are, but the point is that it is more common to call a single method to do something like that, rather than separate set() and get() methods.

  Edited by: jverd February 20, 2011 09:36

  Edited by: jverd February 20, 2011 09:37

• Need help to make the adjustments to TCP between Labview 2011 and webrelay

  Hello

  I'm using Labview 2011 and trying to establish communication with webrelay (X-WR-4R1-l) to control its relay.

  I downloaded a www.ni.com example but it does not work.  (he was tied with this thread as well)

  I did no changes in the example program, that I do not really understand much codes XML.

  I turned ON all 4 relays this webrelay, but in labview, it reads that the relays are turned OFF.

  and when I click the button on the front panel, it does nothing.

  There are several toolkits labview installed in my PC, namely:

  -labview development system

  -application builder

  -recording of data and control module

  -Database connectivity kit

  -internet Toolbox

  -report generation toolkit for Microsoft office

  I'd appreciate it if someone could guide me in this configuration process.

  Thank you

  OK, we're making progress...

  Something seems truncated. Is there something after realy4state in the received string? Because the string is longer, you will need to adjust the number of bytes read. It's more than the 157, which corresponds to the current setting.

  In all cases, their example LabVIEW is a unique feature of relay. You need to look at section 3.2 of the manual that you set for the correct orders. Now there is always a number between 'relay' and 'State' for example:

  1State = 1 for relay activate relay 1.

  You must do two things:

  Write a trainer who composed the correct channels based on the selected relay.

  Write a parser that retrieves the status of all four relays relay. (the offsets will be different, for example)

  I recommend you to treat the four relays as an array of four Boolean values.

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• Gap on the field of Action between workbench ASIC and msc_orders_v

  Hello
  
  The form of workbench CAWC seems based on the view MSC_ORDERS_V unfortunately, using the view, that I have a 'Libération' action even if it is 'None' in the form of CPHA workbench.
  Could you explain to me why?
  There is a snapshot taken at the end of the MRP?
  
  Thanks in advance.

  Hello

  Based on what you say that 1 other person sees it as liberation and the rest as none, then this is definitely a setting in preferences.
  Very probably in tools - options - other tab. Look here in the supply and demand of area. There are 3 options for release. Check if these are defined differently between your username and where you see the expected results.

  Best regards
  Geert

• Dynamically calculate the number of days between two dates and amounts of split

  Hello
  
  I have searched for a solution for this, but had no success.
  I need to show the amounts broken down by days.
  
  I have a table that has an amount column and start and end dates.
  
  I need to write a query so that the amounts will be broken evenly based on the number of days between the start date and end date.
  
  For example, for this line.
  insert into my_test values (' 1, '' 3-mar-2010, ' 7 - mar - 2010 ", 1000);
  
  the query returns this (split $1,000 over 5 days)
  
  
  ID Date amount
  1 ' 3-mar-2010' 200,00
  1 ' 4-mar-2010' 200,00
  1 ' 5-mar-2010' 200,00
  1 ' 6-mar-2010' 200,00
  1 ' 7-mar-2010' 200,00
  
  
  
  create table my_test)
  ID number (10),
  start_date date,
  End_date date,
  amount number (10.2)
  );
  
  
  Select * from my_test
  
  insert into my_test values (' 1, '' 3-mar-2010, ' 7 - mar - 2010 ", 1000);
  insert into my_test values (2, 10-mar-2010 ", 19-mar-2010", 2000);
  insert into my_test values (3, 20-mar-2010 ',' 21-mar-2010, 5000);
  
  
  
  Thanks in advance.

  Hello

  One way is to join a Meter of Table , a table, or (more often) a set of results includes a line for eery number 1, 2, 3,... until the maximum number of times you need to divide a line.
  For example:

  WITH     cntr     AS
  (
       SELECT     LEVEL - 1     AS n
       FROM     (  SELECT  MAX (end_date - start_date)     AS max_day_cnt
               FROM        my_test
            )
       CONNECT BY     LEVEL <= 1 + max_day_cnt
  )
  SELECT       t.id
  ,       t.start_date + c.n                    AS dt
  ,       t.amount / (t.end_date + 1 - t.start_date)     AS amt
  FROM       my_test      t
  JOIN       cntr            c     ON     c.n <= t.end_date - t.start_date
  ORDER BY  id
  ,            dt
  ;
  

  This assumes that all dates have the same number of hours, minutes, and seconds, as is the case in your sample data.
  If this isn't the case, then use TRUNC (start_date) and TRUNC (end_date) instead of start_date and end_date or post some sample data and results if some lines do not represent a whole number of days.

• Differences in the behavior of a Cork in CS6 and CS5.5

  I noticed a difference in behavior of plugin in CS6 and CS5.5.

  In a SequenceSetup function the following call generates a PF_Cmd_ARBITRARY_CALLBACK in CS6 with the State PF_Arbitrary_FLAT_SIZE_FUNC of the additional parameter. The PF_Cmd_ARBITRARY_CALLBACK even appears later in a plugin works and does not work properly in CS6. Although there is no problem with this function in CS5.5, it generates no odd events.

  Suites. ParamUtilsSuite1()-> PF_GetCurrentState (in_data-> effect_ref,) & seqData-> curSessionParamState; (code for CS5.5)

  Suites. ParamUtilsSuite3()-> PF_GetCurrentState (-> effect_ref, PF_P aramIndex_CHECK_ALL, NULL, NULL, in_data) & seqData-> curSessionParamState; (updated code for CS6, in the respect that the signature of PF_GetCurrentState has changed)

  I work under Windows 7 x 64. CS6 is 11.0.0.378 version CS5.5 is 10.5.0.253 version. The only change between these two versions of the plug is the signature of PF_GetCurrentState. So I guess the problem is inside a new SDK. But I did not guess where it may be... You have an idea, what might have changed in CS6 to provide such a mistake?

  Hello

  The problem was not in the call to PF_GetCurrentState. We use multithreading to manage an image in our plugin. And each thread must call PF_Progress callback in turn. But it turned out that "no reminder æ is thread-safe unless explicitly indicated.

  Thanks to technical support After Effects of quick and friendly responses!

• When I use the wizard to transfer between Windows XP and Windows 7 files disappears from Windows XP?

  When I use the files and settings between XP and 7 Transfer Wizard files on XP removed or will I still have the original as files?

  The files and Settings Transfer Wizard won't work on Windows 7, you must use Windows Easy Transfer.  But in both cases, the original files are copied only - not deleted.  They remain on the source computer.

• The catalogue is compatible between windows 10 and mac OS (El Capitan)

  I'm trying to understand if my catalog for Lightroom version 6 is compatible on Mac OS and Windows 10?  I have potentially (looking for a laptop) to pass between the two on the external drive and want to ensure it will work in a transparent manner.

  Hi squint10,

  Yes, the same Lightroom Catalog is compatible with Windows and Mac.

  Please see the following article: use a Lightroom catalog on Mac and PC. Omnium Gatherum of hani

  Let me know if it helps.

  Kind regards

  Tanuj

• SIM card is comparable between iPad Air and I have 2 air pad

  IS the SIM card from t $ interchangeable of the I touch I touch air air 2

  Yes - they both use a sim of nano

• I bought the upgrade for $ 80 between lightroom 4 and lightroom 6.  I now get a message in the upper left corner of lightroom that says mobile trial ending in 30 days

  I wonder how do I get my status in lightroom to change mobile trial to be truly permanent.  the lightroom icon 4 is always next to my lightroom icon 6 in doc.  I bought the upgrade and did all the necessary steps as told to me by adobe.

  Mobile Lightroom is a separate application that can be installed on your IOS or Android. This will allow you to create collections that can be shared in the cloud and edited on the mobile device. Lightroom Mobile is offered as a trial in Lightroom 6. You have 30 days to evaluate if he is a valuable asset for you. Your Mobile with Lightroom access will be terminated at the end of 30 days. It is only available for those who subscribe to the creative cloud. It has nothing to do with the program of office of Lightroom. If you are sure that you are not interested in using Lightroom Mobile you can click the identity plate and make a pause this feature, and I think that notification of the trial will stop at the display.

• EDI inbound mapping difference between 8.4 and 9.0

  Hi all
  We are upgrading to 8.4 financials to 9.0. We strive to apply our customizations again.
  I noticed a difference in the mapping EDI entering between 8.4 to 9.0.
  8.4 the target files are
  1 VCHR_HDR_EC
  2 VCHR_LINE_EC
  3 VCHR_DISTRIB_EC
  4 VCHR_MSCH_EC
  5 VCHR_FRGH_EC
  6 VCHR_SALETX_EC
  7 VCHR_PYMT_EC
  
  But in 9.0, we have the following.
  1 VCHR_HDR_STG
  2 VCHR_PYMT_STG
  3 VCHR_LINE_STG
  4 VCHR_DIST_STG
  
  I know that peoplesoft has presented paintings STG after 8.4.
  
  My question is that we not STG to VCHR_MSCH_STG, VCHR_FRGH_STG, paintings VCHR_SALETX_STG tables in documents of the target to 9.0.
  
  Do we really need to have them as records of target in 9.0?

  When we went from 8.4 to 8.9, we had to change to use the new table structures. It was about 3 years ago, but I remember that the various tables, that you ask the subject have been combined in the other tables (perhaps the payment). You will need to examine each new table fields to see where freight and taxes are now stored. We didn't store this information for the good we loaded via EDI in the past, so we didn't have to worry in the future.

  Good luck! It was not fun convert this part of the system!
  Jennifer