Different routes for interfaces VXLAN?
Hi guys,.
According to the NSX v2.1 Design Guide:
The need for static routing is due to the fact that ESXi support only two TCP/IP stacks:
-VXLAN: This is dedicated to the VMkernel VTEP interface traffic. A dedicated-default route 0.0.0.0/0 can then be configured on the stack for each ESXi pointing the gateway deployed on the local of ToR, and this allows to communicate with the VTEPs deployed in different subnets of Transport distance.
-By default: This battery is used for all other types of traffic (vMotion, management, storage). It is typical to use a default for purposes of management route (given that the connection to the management interface of vmk0 could be from several remote IP subnets). This means that the static routing configuration is necessary to support communication inter-sous for other types of traffic.
Sounds good, but is this special VXLAN stack added by default? Or do I need to create and configure? I configured a host with a separate management and VXLAN VMkernel interfaces. I see my traffic VXLAN hustled through the default gateway on the management network.
I use static IP pools on the direction and the VXLAN interfaces. Does anyone know how to add this route dedicated by default under the battery VXLAN?
Released of one of my hosts of calculation:
vmk0 = management
vmk1 = VXLAN
~ # esxcfg - road - l
VMkernel itineraries:
Interface of network gateway subnet mask
172.16.100.0 255.255.255.128 subnet local vmk0
by default 0.0.0.0 172.16.100.1 vmk0
~ # esxcfg - vmknic - l
Interface Port Group/DVPort IP IP family address Netmask Broadcast MAC address MTU TSO MSS active Type
0 IPv4 172.16.100.100 vmk0 255.255.255.128 172.16.100.127 00: 0C: true 29:ab:31:c9 1500 65535 vmk0 STATIC IPv6 fe80::20c:29ff:feab:31 0c 00 64 9:0 c: true 1500 65535 STATIC 29:ab:31:c9.
FAVORITE
vmk1 2 IPv4 172.16.200.100 255.255.255.128 172.16.200.127 00:50:56:64:0e:f3 1600 65535 true vmk1 STATIC IPv6 fe80::250:56ff:fe64:ef3 64 00:50:56:64:0e:f3 1600 65535 true STATIC 2.
FAVORITE
Kind regards
Bobby
VTEP interface is created by NSX during the preparation of the host.
You can see this step the NSX Getting Started Guide - "step 3: prepare the ESXi NSX hosts" (Getting Started Guide for vSphere NSX).
Once you have your VXLAN battery in ESXi, you can see its stack via vCenter UI (as usual).
Or if you like CLI:
. Directions:
root@Lab1_ESXi1: ~ # esxcli ip network route ipv4 list n vxlan
Interface Source network gateway subnet mask
------------ ------------- ------------ --------- ------
by default 0.0.0.0 192.168.20.1 vmk1 MANUAL
192.168.20.0 255.255.255.0 0.0.0.0 vmk1 MANUAL
. Ping
root@Lab1_ESXi1: ~ # ping ++ netstack = vxlan 192.168.20.22
PING 192.168.20.22 (192.168.20.22): 56 data bytes
64 bytes from 192.168.20.22: icmp_seq = 0 ttl = 64 time = 0,616 ms
Dimitri
Tags: VMware
Similar Questions
-
Sampling frequency for two different routes for acquisition of data USB-6009
Hello
I use a box USB-6009 and incorporating the "daq assistant" to change the sampling frequency. I'm trying to find a way to set the sampling frequency to two unique values for the two separate channels. I tried implementing two assistants daq and different for each channel sampling frequency setting, although it does not work. Is it possible to set the sampling frequency for all channels, and then reduce the rate for another channel - or an alternative? I would be recognizing any input on this matter, thank you!
-Anthony
All tasks on a DAQ card using the sample clock should use the same clock. Therefore, you cannot have two tasks on the same sample of DAQ card at different rates.
Alternatives would be:
1. to combine all channels in a single task and to accept additional data
2 get an additional DAQ card to use at the same time
-
different workflows for different users
Hello
I want to create different workflows for different users in bcc atg. As for example I login as a Bishop, I create the project, I can add assets, when the author, I have simple step like deploy to production. When I login as a normal user, I must follow the normal flow. for this what are the steps that I followed and what files are xml I have change for the commercial user interface.
Hello
Finally, I got the interface user of Merchandising for my custom workflow. to do this, I added a configuration as speedWorkflow.xml file
PUBLIC "-Technology Group, Configuration of the Application of CCI Inc.//DTD //Art / / IN".
"http://www.atg.com/dtds/application-configuration/application-configuration_1.0.dtd" > ""
atg.remote.commerce.Resources merchandising.activity.displayName atg.controlcenter.view.DividedApplication Profile of $accessRight$ sitecatalogread: read; Profile of $accessRight$ sitecatalogfull: read;
Profile of $accessRight$ mediaread: read; Profile of $accessRight$ mediafull: read; Profile of $accessRight$ storecontentread: read;
Profile of $accessRight$ storecontentfull: read; Profile of $accessRight$ storesread: read; Profile of $accessRight$ storesfull: read;
Profile of $accessRight$ promotionsread: read; Profile of $accessRight$ promotionsuser: read;
Profile of $accessRight$ promotionsfull: read
/ ATG/Remote/ControlCenter/service/GenericDividedApplicationInitializer
10 /Common/commonWorkflow.WDL
atg.remote.commerce.Resources merchandising.activity.displayName atg.assetmanager.common.view.AssetManager / ATG/Remote/trade/service/MerchandisingAssetManagerInitializer
/ ATG/Remote/trade/assetmanager/ContentConfiguration
/Common/commonWorkflow.WDL
ApplicationConfigureManager.properties
& applicationFiles =.
/ATG/remote/ControlCenter/service/speedWorkflow.XML
-
How to send different content for different devices
Hello
I would like to set up my Dreamweaver CC site to send a Unity3D game (requires the browser plugin) for desktop but send a video trailer of the game for tablets and phones. The problem is that the Unity 3D web player does not work on tablets and phones I have Adobe Muse who would do this simple enough that you can send a different content for different devices easily, but Muse does not support the unity 3D plugin.
I explored websites Bootstrap and sensitive, but I don't think that's the answer. I have found a lot of tips and tutorials on how to send the same content but formatted differently to different devices, but I couldn't find anything on the use of Bootstrap to send any content to different devices. Is it possible to use for this media queries?
I read a little, but about setting up subdomains. Is this the way forward? Any advice will be greatly appreciated. Thank you.
Zaid
Hi Nancy, thanks for your idea, but I just found a solution so easy, that it makes me feel stupid that I can't find as soon as possible. My site host, Business Catalyst, allows you to create your site with content for phone and tablet in different folders. Then, you can route these files to the phone features or tablet. It's a simple drop down menu choices. You don't have to do subdomains or anything like that. Wow, what a relief!
Zaid
-
2 service Consolen Ports with 2 different routed IPs
Hi all
I want to configure 2 Ports Serviconsolen with of different IP addresses. The two IP addresses are routed. Howe can I put different default gateway for this configuration.
SConsole1: 192.168.1.x
SConsole2: 10.1.1.x
Thanks for any help
Nautilus
Hey,.
It is not possible to have multiple GW.
You must add a static route for that to happen.
Take a look at the following Article: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1005212
-
a few different themes for imovie as I'm fed up with the 'old'
a few different themes for imovie as I'm fed up with the 'old'
Google for "iMovie themes."
You can also modify existing themes.
-
How to choose different sounds for each contact
It is possible to select the notification sound for each contact email name?
You can set different sounds for ringtone and messages for each contact independently of the contacts application change a contact and then set the tone that you want under the header of message or ring.
For email, you can set a single sound of the sounds settings section. It is not possible to set different sounds for notifications by e-mail.
-
Is it possible to play different sounds for the emails and instant messages?
Hello
I was wondering if it was possible to play different sounds for the emails and instant messages. I use Thunderbird quite often with emails and instant messages imported from Gtalk.
I think it would be very convenient to be able to distinguish the two sounds, because they do not involve the same things.
Thank you very much.
Olivier Hubert.
There are only six modules of cat, three of them are on notifications. Choose the one you think will do the job for you. https://addons.Mozilla.org/en-us/Thunderbird/Extensions/chat/?sort=popular
-
Actions by different default for local vs remote files
I put the default action for documents for automatic download, I want to keep.
Is it possible to have different behaviors for local links (file:/foo.pdf), namely opens automatically (for example, using a plugin) instead of 'download' of their new?I ask this because I generate a local html file to easily navigate and organize my growing collection of scientific articles, which are stored locally.
I solved for the moment by creating two different profiles with the corresponding actions of the file. Of course this isn't the best solution, because I need to keep the two instances of the browser running, and I need to use the appropriate forum for local vs navigation remote
-
Can I set a different ringtone for individual reminders?
O have a few reminders that are rarely near eachother time wise. Can I set a different ringtone for each callback, so they do not have the same tone?
Yes you can when you set the reminder that he will tell ringtone or something like that click on it and choose what you want to
-
Air ipad 2 at the same price in different stores for Apple in California?
Air ipad 2 at the same price in different stores for Apple in California?
To different Apple store, Yes. Some other retailers can offer a small discount (Costco is about $ 20 cheaper, for example). but for the most part, it will be the same price regardless of where you buy it.
-
R8500: QOS is terrible on this router for $400
So before you get this router I was using a $20 off of eBay refurbished Linksys router E6500 running DD WRT (Yes, you can run it on this router if you know where to find the firmware for this). In any case, the flow was not the greatest, but I never had problems.
I have a ReadyNAS RN516 to my office and the backup on my Mac using the time machine office nas. I also have the Charter which gives single 4mbps upload (it's slow, but once he finished the initial and subsequent backup backups are fine). In real life, it's more like 4.75mbps. I have QOS value 3.75 to ensure that my modem is not bufferbloat and kill my connection.
My problem is however that often my devices slow to a crawl (if more than 5 Ghz wireless or wired) whenever I am downloading. On my other router I just put 4 Mbps as the download limit and all devices than 4mbps equally, and I never had no problem with slowdowns or high pings and lag. No matter what I put the download speed at... He accuses just out for no apparent reason on this router.
If someone can tell me why free DD WRT software works better than the software on a router for $400? Just curious?
The new firmware seems to have helped. I changed a few things as well, and it seems to work very well.
Regarding the comment of routers figure 3 and 4 routers in figure, there must be an improvement on the 2 figure routers and routers multi-3, otherwise what's the point?
I'm trying the test of the future a little, that's why I chose this router. It doesn't matter if I take it right back and stick with my $ 20 DDWRT router. I do not have the latest and greatest tech (2012 macbook air and several iPhone 6 more ' and a room above the router and I can not even through any speedtests 60mbps (run through the gigabit mac that is wired and I move 65mbps each time.)
I don't have a fast enough home nas box, but I'd be curious to see wireless local area network speeds. I wonder if I can break even 100 Mbps with this thing...
-
Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi
Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi
Superior...
After all, the chip is mainly a modem.
Wireless is there but not designed as the primary connection.
Wireless 802.11n 300Mbps AP with 2 x 2 MIMO Wireless bridge, WDS multiple SSID, including isolated invited SSID WiFi QoS (WMM) and PowerSave wireless security: • Wi - Fi Protected Access (WPA, WPA2) • AES, TKIP, WEP encryptio
It is the Wireless N standard.
The TC is dual-band simultaneous AC1750... even if in fact apple never leaves anything use 300mbit on the 2.4 GHz is more like AC1450... It is also 3 streams on both bands not 2 x 2.
The fact that aid.
The only thing to note is that a router from Apple can join never a router wireless not apple... so, there must always be plugged in by ethernet.
-
How to acquire of various AI channels simultaneously with a different range for each of them?
How to acquire of various AI channels simultaneously with a different range for each of them?
In LabView, I found some examples but in C it is not seem to be any.
Or you can add channels one by one with individual instructions: the follwing code compilation and runs without error on vitual DAQ hardware:
ERR = DAQmxCreateTask ("", &taskH); ")
ERR = DAQmxCreateAIVoltageChan (taskH, ' Dev1/ai0', 'AI0', DAQmx_Val_Cfg_Default,-5,0, 5.0, DAQmx_Val_Volts, "");
ERR = DAQmxCreateAIVoltageChan (taskH, ' Dev1/ai1', 'AI1', DAQmx_Val_Cfg_Default,-10,0, 10.0, DAQmx_Val_Volts, "");
DAQmxStartTask (taskH);
ERR = DAQmxReadAnalogF64 (taskH, 5, 10.0, DAQmx_Val_GroupByChannel, val, 10, & read, 0);
DAQmxClearTask (taskH);
-
How to set different color for the table column header
Can I set different colors for the 4 following as being attached.
-color of the header text
-the head of the column of the background color
-color of the text of the content
-color of background content
The value of the cluster - 2, -2 to define all of the cells,
Then go back and the cluster the value-1, -2 to simply set the line header.
(If you also had a column of row headers, then -2,-1 would set them. Course the upper left corner which is the intersection of the column header and row header will change with any of them.)
Maybe you are looking for
-
Should I buy $18,000 iPhone 2 G?
Then, I had just recently on something because I want to buy a new iPhone 2G to replace my old dead I never really used, it cannot connect to iTunes, or can be used, so I went through it looking to replace my old 2G iPhone (one of them is deceased).
-
I can't open my computer hp laptop when I suddenly stop it to update
Saying: fatal error C00000034 applying the operation update 160 75001 (_00000...)
-
Cannot find download option for KB888111.exe, the package of Audio UAA High Def
Photoshop don't like my display driver, so I downloaded an update from Intel. The Intel instructions say to run KB888111 to install the driver. It does not install without it.
-
Tried to install Diablo III. Could not. Said (Vista) Operating System to SP2. Check out my features and went to the microsoft Download Center and download the sp2. Click on it to install it... half completed and stopped. Said "installation failed." T
-
HP 550 153na: video screen
Can I use my old video of screen on my computer it hs taken the old (and you show one in the connection for this model guide) or do I have to buy a new screen with HDMI