Difficult to implement a preloader to my flash project

Similar Questions

• difficulties to download the latest version of flash

  difficulties to download the latest version of flash

  RondaVU wrote:

  When I try to install it, it won't, said manual, does not work either.

  Not sure what you mean; have you tried offline installers of http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player-Windows.html #main - pars_header ?

  If it still does not respond, you can post the contents of the FlashInstall.log file in C:\Windows\system32\Macromed\Flash and C:\Windows\syswow64\Macromed\Flash

• To implement a preloader to load a swf

  Hello

  I am currently implementing a preloader to load a swf. I have a swf named 001.swf. I need to create a preloader to load this swf. So should I create a swf over to loding the 001.swf. Hope someone will help me.

  Thank you and best regards,

  Sreelash

  It is usually the most satisfactory solution to build a preloader.  You can then use:

  var mcl:MovieClipLoader = new MovieClipLoader();

  var OL: Object = {};

  lo.onLoadProgress = function (target: MovieClip, bl:Number, bt: number) {}

  Create your preloader using bl (= loaded bytes) and bt (= total of bytes)

  }

  mcl.addListener (lo);

  MCL. Load("001.swf",1);

• Best practices for concocting scenes in a Flash project?

  Hi, I am currently working on a flash project with the following characteristics:

  1. using a PC
  2. 2048 x 1080 pixels
  3. 30 images/s
  4. An audio file playing (once) continuously throughout the project
  5. There are actions that pertain to audio, so timing is important
  6. at least 10 scenes
  7. length total about 7 minutes
  8. current intention is so that it can be played in a theater as a surprise modern

  What is the best practice to work on this project and then compile together?

  Do it all in a project file?

  Split the work in different projects (xfl) records for each scene, and then put together when all the scenes are finalized?

  Use a project file, but create different "scenes" for each respective stage?  I think this is the 'classic' (?) way.

  Make the scenes "clips" and then insert them into the timeline with audio as its own layer?

  Others?

  I am currently working on him by all in the file of a project.  But I noticed that there is some lag (or it is jerky) portions during playback and the SWF story watch 3.1 MB with a yellow triangle with an exclamation mark symbol.  Thanks in advance.

  you who would do only if it makes your job easier.  in General, it would not be.

  When you try to synchronize sound and animation, I think that most of the authors find it easier to use graphic symbols, because you can see their animation when the main timeline scrubbing.  with movieclips, you see only their animation during the test.

  However, if you use actionscript to control some of your symbols, these symbols must be movieclips.

• Importing video in Flash project?

  Hi, I want to ask how can I import the video into my Flash project and display?

  I tried to embed FLV, but the sound quality is pretty shity and video quality also. In addition, extends the scenario that is too long, because my video is quite long too. He says it can be less than 16000 pictures to run.

  Now, I chose import-> import video-> external load... and then I put it on a stage. The thing is that when I test it, it seems I have expanded the timeline too so that I can play the videos entirely. And he won't slow down the computer so when I want to export. Is there a way I can read the video simply by creating a keyframe?

  Please help me.

  a problem at some point.  It is too easy for you to get confused otherwise.

  you have your button to play the video?  If this is not the case, do both:

  label the first image in scene 2 (for example, "sceen2_frame1") and in your button handler, use:

  _root.gotoAndStop ("screen2_frame1");

• flash project does not consistantly

  Hello

  I have a flash project that is a game.  I have loaded the video on my site using video with alpha channels that I can use different horizons.  Everything seemed to work fine, but now when I play online sometimes the video won't play some questions.  It is not always the same question.  He seems to be coded properly and played very well.   It seems that the video glue sometimes, is there a way to eliminate this problem?

  Select this option.

  Yes, the FLVPlayback component is also available in AS2. I used it for a long time in AS2 projects and it works very well.

  Here is the reference language and the AS2.0 component which becomes harder and harder to find:

  http://help.Adobe.com/en_US/AS2LCR/Flash_10.0/help.HTML?content=Part2_AS2_LangRef_1.html

  Here is the reference to the AS2.0 FLVPlayback component with the code example:

  http://help.Adobe.com/en_US/AS2LCR/Flash_10.0/00002331.html

• What is the best format and the size of a logo in a flash project?

  I have this flash project in which I animate a logo from big to small, the logo in the great State looks pretty good, but when flash reduced the logo image animation tend to Pixelize (I don't know if this term is correct).

  Thank you

  This is what happens when you change the size of an image.

  The best format for a logo is the vector.  Then, you can change its size, rotation, etc. without distortion or pixelation.

  If you can not go with a vector graphic, try to use several images of different sizes, and switch between them if necessary to recreate the interpolation, or, try a PNG and hope that pixelation is not too bad.

• Import a flash project into a flex project

  Hello

  I have create a carousel in flash CS4. It works very well... but I want to integrate it into a flex (Web site) with Flex Builder project.

  Thank you!

  SWFLoader will allow you access to Flash content in a Flex application.

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=controls_15.html

  http://blog.pixelingene.com/?p=216

  http://www.YouTube.com/watch?v=bGMwAcAyE9Q

  Cannot import Flash projects in Flex.

  If this post answers your question or assistance, please mark it as such.

  Greg Lafrance - Flex 2 and 3 certified ACE

  www.ChikaraDev.com

  Flex / development, training, AIR and Support Services

• Jump preloader in AS3 Flash

  Hi, I searched the internet but I couldn't find a way to jump the preloader in AS3. Everything I found was AS2 (maybe I'm not good looking )

  When I visit my page again and the flash has already been loaded, I'm stuck on frame 1 and the film does not continue to where it supposed to be. Is it possible to ignore the preloader if the swf file is already preloaded or cached?

  Here are my actionscript:

  Import the required property
  import flash.display. *;
  Stop the playback head, while loading occurs
  This.Stop ();

  Create a listener to call the function of loading as loads of film
  this.loaderInfo.addEventListener (ProgressEvent.PROGRESS, PL_LOADING);

  / * This is the main function, basically he grabs the bytes loaded, and total
  calculates a percentage and bar extending and adjusting the poster
  textfield display. If your text box/bar instancenames aren't bar tools/lpc,
  you will need to adapt this code to match your instance names * /.

  
  function PL_LOADING(event:ProgressEvent):void {}
  var pcent:Number=event.bytesLoaded/event.bytesTotal*100;
  Stretch bar
  lbar.scaleX = pcent/100;
  Display the % loaded into the textfield
  LPC. Text = int (pcent) + "%";
  If the movie is completely loaded, kick in the next section on the main timeline
  You can change the gotoAndStop (2) to a gotoAndPlay (2)
  {if(pcent==100)}
  this.gotoAndStop (2);
  }
  }

  Thanks to all who help.

  use:

  Import the required property
  import flash.display. *;
  Stop the playback head, while loading occurs
  This.Stop ();

  Create a listener to call the function of loading as loads of film
  this.loaderInfo.addEventListener (ProgressEvent.PROGRESS, PL_LOADING);

  this.loaderInfo.addEventListener (Event.COMPLETE, loadCompleteF);

  function loadCompleteF(e:Event) {}

  this.gotoAndStop (2);

  }

  / * This is the main function, basically he grabs the bytes loaded, and total
  calculates a percentage and bar extending and adjusting the poster
  textfield display. If your text box/bar instancenames aren't bar tools/lpc,
  you will need to adapt this code to match your instance names * /.

  function PL_LOADING(event:ProgressEvent):void {}
  var pcent:Number=event.bytesLoaded/event.bytesTotal*100;
  Stretch bar
  lbar.scaleX = pcent/100;
  Display the % loaded into the textfield
  LPC. Text = int (pcent) + "%";
  If the movie is completely loaded, kick in the next section on the main timeline
  You can change the gotoAndStop (2) to a gotoAndPlay (2)
  {if(pcent==100)}
  this.gotoAndStop (2);
  }
  }

• Impossible to implement EasyLock in the Sony flash drive.

  I am currently performing EasyLock in my Sony, USM64GU flash drive but I get the error prompt: "Please copy EasyLock in the root of your Micro Vault and run it from there." I already copied the EasyLock in my flash drive.

  Can someone help me, please? Thank you.

  I am currently performing EasyLock in my Sony, USM8GR flash drive but I get the error prompt: "this application can only begin to support micro vault" I have already copy in my micro vault I have window xp sp3

• Problem with Preloader in my Flash's AS2 game

  I have been using this tutorial to make a preloader:
  
  http://www.republicofcode.com/Tutori.../preloader_bc/
  
  I ran into one problem however.
  When I simulate the download, it shows just the background color of the game while it loads, and when it finished loading, it displays the full loading screen. I followed the tutorial exactly, except added my filenames in the AS2 code.
  
  Image 1, I to the preloader, the following ActionScript code:

  
  

  if (_root.getBytesTotal() != _root.getBytesLoaded()){
  stopAndGoto(1); 
  }
  preloaderBar._xscale=(_root.getBytesLoaded()/_root.getBytesTotal())*100; 
  loaderTxt.text=Math.round((_root.getBytesLoaded()/_root.getBytesTotal())*100)+"%";
  
  

  
  

  
  

  The advice or answers to what I'm doing wrong?
  
  Thank you, MrA615.

  Place your other items in 3 (or higher) of other layers

• Implementation of Web services in Flash CS5

  Hello, I'm looking for a walkthrough to implement a call to a Web service from a swf file, I can't find...

  What exactly do you find? Search Google for "AS3 WebService" gives tons of information and examples. Essentially, you simply use URLLoader to call the service and pass your data. A complete listener attached to the charger allows you to retrieve data from the service.

• (Redirected) Ailenware x 51 of the difficulties of implementation after the opening.

  First off the coast, I want to say that I'm not very good with computers, and it was the first time that I never opened my computer case. I bought a pci wifi card for my alienware 51(not knowing it didn't have a pci slot) x and tried to install it. After that I discovered that it was not a pci slot I have everything back together. When I then rebooted my computer the exotic eyes were green, the power light was white, side lights are blue and the fan sounded very low. (normally exotic eyes and side panels is white and the power button does not light) Windows then told me to use the "start up repair" program that I made. The program sought to solve the problem for a few hours. Then I restarted my computer, but the same thing kept happening to. It's pretty obvious that I messed up the internal hardware, but everything seems fine. I was hoping that someone would be able to tell me what I did wrong and how to fix it. Thanks in advance!

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Flash project in flex

  Hello, I have a program that is written on flash, then I export and put the .swf in Flex?

  BB it will accept?

  -Thank you

  BB don't really care how the final application of AIR was created, as long as it meets the criteria is which includes the loading of the AIR, signature, icons, etc.

• Best practices for structuring a big Flash project?

  I'm building an educational site in Flash. A student works through a series of activities, or watch a video of animation or answer a question. You can get a good idea of the Basic with this model functionality: http://imgur.com/Mi4JyHN.

  
  

  Once a student logs in, the server responds with their current activity and progress. Displays the activity, and all interactions of the student are sent to the server for recording (time spent on questions, answers clicked, correct and incorrect buttons, etc.). When the student is done with an activity, the server is notified and responds with the next activity to present.

  I'm pretty new to Flash and would love to hear how people with experience framing project. I see the following options.

  1. A huge SWF. All audio and video clips are embedded in the SWF file and swapped out if necessary. This is not a reasonable option, because the size of the SWF file that results would be enormous.
  2. Exactly a SWF for each activity. Command buttons and progress bars are obviously shared between each activity, and it seems that a lot of duplication to have in each SWF compilation. Also, if a button is changed, this requires re - compile everything, right?
  3. A SWF of other charges. The main SWF file contains the buttons and progress bars and retrieves external SWFs on the server to replace the stage space. I don't know enough Flash to predict how this will go.
  4. JavaScript, part Flash. The button bars and progress are made in HTML + JavaScript. The page retrieves external swf on the server to replace the stage space. This is the current system, and the problem is the ugliness or the difficulty of managing communication between JS and AS3.
  5. HTML5. While I wish it is a possibility, I don't feel as if it was. The animation is still easier in Flash and we always aim some older browsers. The best part of Flash's consistency in the experience.

  
  

  Additional questions:

  • What options leave us open to the publication for mobile using Adobe AIR?
  • What options are best for automated tests / accessibility / version control / general layout of code?

  Thank you very much for all the advice!

  For a Flash-based design, I'd go with option 3.  General commands and objects common to use with each activity would be in the main file.  Whether or not the main file would be responsible for sending data to the server might depend on some there is determinable similarities between databases... activity otherwise it might fall on sovereign wealth funds individual to interact with the database activity.  There are too many unknowns in this regard to offer much.

  If this was going to be a responsible application, as an AIR application, and then option 1 might be more reasonable since just install once for all is available.

  When it comes to mobile, you're likely to hit a snag, if you rely on the AIR/Flash to try to deal with one hand and activity SWFs approach... mainly in the area of the Apple... unless I've forgotten a lot of what I've been involved with some time ago, a loaded swf file cannot contain any code when it comes to iStuff.  If you end up having to do the main file contain all the coding to deal with the treatment of each activity.  Each UI element / interactive cannot exist by its name and the main file should target and assign listeners and treatment and etc... a mess in my opinion.  This is why having one large AIR file is maybe a bit more reasonable.

  I have nothing to offer at the end of things HTML5.  I have not yet traveled in this way.  Because HTML5 is basically without wings without javascript and CSS, he could come to pass that the current system (option 4) is the way to go.