Difficulties in finding devices on the PXI-1033

Similar Questions

• Modules in the PXI-1033 chassis detection problem

  Hello

  I met difficulties in operating my PXI-1033, which installed two strips of XIA Pixie-4. Until recently the system was working properly, but now I am unable to detect and use modules using software of XIA, although according to Windows both modules are "working properly". Nothing has changed between the time it was working and now (that I know)!

  I suspect the problem involves the chassis, since when I place a module in slot 6, the chassis will not be powered. It will power-up with any other occupied housing.

  Any help would be appreciated.

  See you soon.

  Hello jnod,

  At these modules never appear in measurement and Automation Explorer (MAX), if so they appear actually now?

  Also if you have other material, I'd be interested to know if the PXI chassis will start when you have a module IN slot 6.

  The chassis won't start when either module Pixie-4 is in slot 6?

  You probably already know, but turn you on the chassis PXI before you have activated on your computer?

• Simulate the PXI-1033

  Good afternoon

  I need some clarification on the simulation of PXI via MAX.   I have several PXI modules and a PXI-1033 (integrated into the PCIe MXI) chassis on command.   As they will take several weeks to arrive, of course, I want to simulate these devices and to start building screws

  If I understand correctly the information contained in the knowledge base and forums, all I have to do is to simulate modules PXI themselves in MAX and nothing to simulate PXI-1033 chassis.

  Is this correct?   Guarantees as to any would be greatly appreciated!

  Sincerely,

  Zach

  Hey Zach,.

  You are right. We cannot simulate a PXI-1033 chassis, but because it's just an expansion chassis, there is no need to. You can simulate the modules themselves in MAX under DAQmx devices and then you should be able to start writing code.

  Good luck and thanks,

  Ryan

• Synchronization of HAVE several devices in the PXI by the Sub - VI of DAQmx create channel

  Hello

  There are two PXI-6123 cards in the slots of the PXI-8109, and then I would acquire the simultaneous analog input signals.
  The manual of the PXI-6123 recommended with a common time as a master Timebase and base to the slave devices.

  However, I wonder if I can take advantage of the method as the accessory, including all channels to HAVE the devices in the physical channels to create.

  Does it work? How can I know what are the "some data acquisition hardware OR" in the passage of the attachment?

  Hello

  Please refer to this KB: http://digital.ni.com/public.nsf/allkb/78E44565FD87E7D686257108007F94F8. I think that you are good with your two PXI-6123 devices, if only you DAQmx 8.1 or later installed. If please come back and let us know your test result.

  Thank you

  Phil

• The attention! Error initializing PCI express slot 4 (for a PCIe used in the PXI-1033 chassis)

  Hello

  I have problems with my PXI system. When I try to contact the 1033 chassis using his high card my computer does not recognize (the PC displays the message during the start-up stage: "alert!) Error Initializing PCI express Slot 4). It was working fine before, but the chassis has been disconected with the PC on. I read that it may cause failures of communication, but I have not found a good source for this problem. Could someone help me with this problem?

  Thank you very much!

  Victor

  Hi Victor,

  Can you check something for me? One, can you try to disconnect the cable between the PXI and PCIe cards and try to restart your machine. When you do this, you still see the message? I know that you mentioned in your first point that the chassis is turned on when you see the error message, so I'm just trying to clarify what you mean by that.

  Also, it is quite easy to plug in a cable express MXI upside down, so even if point 2 you said that the links appear to be good I had to check to make sure that the cable is properly connected. You have additional cables, you can test?

• Automatic shutdown of the PXI-1033 chassis. Noisy case fan.

  I went to use my PXI chassis today. I always keep power, but today it wasn't on when I went to for use. It turns out that there is an auto power down if the fan "fails". So, I removed the power to frame and then repowered the chassis. Heard a loud fan - as one of the blades reached something solid. And I only heard something when the chassis in the sense of 'big fan down' is the big fan on the "merits" of the unit which cools the boards. To resolve this problem, I removed the air filter and then the wire screen and then wire fan guard. I rebent the 4 feet of the wire fan Guard (be sure to rebend both elbows on each leg) so that it is wider the fan blades. Put back to gether and now no sound.

  Apparently my PXI chassis is part of a reminder "replacing the fan.

  See http://digital.ni.com/public.nsf/allkb/B9BB6E483EDB5353862578180081FA6A

• The PXI-8512 does support the series 2 filter or a similar mechanism to filter the messages?

  Hello

  I need to buy a couple of cards CAN interfaces for my test application and I wonder what you choose

  I already used a PXI-8461 to obtain data of the customer model under test, and due to the fact that sometimes the client bus can be very busy, but most of the messages is not interesting for my system that I use currently series 2 comparator/mask/filter to filter only the interesting messages.

  Without this filter, the PXI-8461 often returns an error due to overloading of the bus. With the filter, everything works perfectly

  Now I need to implement several testbeds with this same feature, and I plan to move to the new PXI-8512 for new.

  My question is: is the most recent PXI-8512 a device series 2 institutions? Support the filter 2 series or any other mechanism to avoid problems on the busy bus?

  Thank you for your support.

  Kind regards

  Davide

  Hi Davide.

  the PXI-8512 isn't a series 2 device. The PXI-8512 is a device of the X-NET family. X-NET is the technology whose use OR in support of CAN, LIN and FlexRay with a driver API. Series 2 devices use the former NI-CAN driver that only supports the CAN. All of the new devices are devices X-NET.

  Take a look to the following document:

  NI-CAN for NOR-XNET application migration
  http://www.NI.com/white-paper/9717/en

  On this page you will find the following statement for the function that you are already using:

  Transceiver filters were traditionally indicated for applications where only a few CAN IDs have been considered on a bus high load. In some cases, material NI-CAN support the bandwidth of the full bus, which leads to a buffer overflow. The hardware architecture OR XNET uses the engine NOR-XNET DMA-driven to eliminate the occurrence of buffer overflows. CAN of NOR-XNET interfaces are able to handle high load bus and transmitting at the maximum rate without coupling to buffer overrun. If your applications use the hardware filters extensively, NOR recommend setting up CAN opposes, or by reading the bus while using Network Interface objects. The best option for these applications is to modify your code to use the API OR-XNET native.

  Best regards, Stephan

• Can I connect a link more MXI for PXI-1033 card in order to work with it

  Ladies and gentlemen,

  Tell me please that I can plug a card of MXI link more in the PXI-1033 chassis in order to work with it.

  In other words, I don't use the built-in controller for MXI and want to work with the NI PXI-8366 MXI-Express and PXI-1033.

  Thank you.

  The answer to your question is no. The question that must be taken into consideration is the type of housing, we have access to on the PXI-1033. To use a PXI MXI card for control purposes in a PXI system, we need to use the card in a slot of system controller (denoted by a triangle around the number of slots on the chassis). With the 1033 however, we have no access to slots control. Because of the connection of controller MXI incorporated, we only have access to a calendar/trigger and devices slots.

  Is there a particular reason you don't want to use on the 1033 MXI connection, or you just want to avoid having to change the connection to another computer?  Single MXI cards which would depend on the space available on the PXI-1033 would be something along the lines of the 8367 and 8367, who are used to the Garland of a separate chassis.

• Try to find information about the HP Pavilion DV6000 series

  Anyone know why it is so incredibly difficult to find information on the HP website about the series HP Pavilion DV6000 of computers, and where I can find if it still exists?  I have found information on other sites that indicate enough although this computer of fixation for a sis friend hopeless and I am inclined to agree with what I've seen so far, but I can't find the lists of computers that are supposed to exist indicating which computers are supposedly devastated with this 'hopeless problem', it is currently impossible for me to confirm the verdict.  I prefer finally reach my own conclusions using as much information that I can possibly understand rather than simply using opinions limited to some people, and that is why I would be very happy for any information you could give me on this issue.

  The system in question is HP Pavilion DV6000 series with a specific model of DV6405US number and the system shows that it is well powered food, but when you press the power button, the only thing that happens is that the battery light flashes three times and then absolutely nothing.  If I try the system on battery only, I get no response whatsoever, and I get same answer on AC power only.  I only get the flash answer three with AC and battery connected, and that's the only answer I got from the system.  This answer will repeat as many times as I press the power button.  I tried unplugging all sources of energy and don't let the rest of the system for an hour, by pressing the power button for about a minute, reconnect the power supply and I still get no results whatsoever, unless I have reinstall the battery.  At that point, he returned to simply give me only the three flashes of light battery.

  I don't know of a list of anywhere that gives all of the models affected by the Nvidia gpu failure, but I can tell you that the DV6405US has the Nvidia GeForce Go 6150 , which is well understood. Models with this gpu have been included in a regulation by Nvidia that include spare laptops. Unfortunately, the deadline under the regulations is long expired.

  Several members have used the service of repair HERE and reported excellent results. And before you ask_no, I am not affiliated in any way with this service. I simply have viable options for owners to post this problem and have seen its results. One of my personal friends even recently used his service and was very happy.

• When I update my device I need to have the apple ID and I can not find and contact the owner of the first.

  Hello;

  I can't find the original owner of my camera.

  I can't have my Apple device Id. When I update my device I need to have the apple ID and I can not find and contact the owner of the first. And I have a lot of problem with this matter.please help me. Please unlock my device to activate locking Mode.Or maybe if I have the Apple Id for my camera I found the password.

  My phone number is:

  IMEI:

  *********

  ICCID:

  ********

  Serial No.:

  F2 * FFK

  Part number:

  ME300LL/A

  Please, please, please help me.

  best regards;

  Siavash

  
  

  < personal information under the direction of the host >
  

  Only the owner of the unit can remove locking activation. If you have the original receipt, you can try to take it to an Apple Store and ask them to do, otherwise return the unit to the person to whom it was purchased for a refund.

• Why not Time Capsule shows under "other devices" in the Finder?

  Why not Time Capsule shows under "other devices" in the Finder on my MAC?

  "Devices" are connected directly to a Mac and would include things like USB hard drive, FireWire drive and Thunderbolt drive, etc.

  The Capsule is a "network" connected to a network drive... If the operating system on your Mac behave, Time Capsule will appear in the Shared section.

  If you have added a NAS (Network Attached Storage) disk, this product would also appear in the Shared section.

  A wireless printer can also appear under shared.

• PXI-1033 not detected until the pc is rebooted

  We have a chassis NI PXI-1033 with a PXI-5114 and PXI-4072-PXI-6221, fist, that he had failed to recognize and install drivers for motherboards. The search in the knowledge base, I tried workaround by disabling the PCIe mode ' bcdedit/set pciexpress forcedisable' command and rebooted the pc. Then the system recognized and installed the drivers for all the hardware.

  Disabled the PXI system at the end of the day. The next day, after activating the system, he did not recognize the hardware, returned changes to aid 'bcdedit/set pciexpress by default', then restarted the pc. Once again the material have been recognized.

  I tried to change the configuration on the PC BIOS, without success. The PC is an ACP-4000 of Advantech. We need to restart PC after a cold start so he could recognize the hardware and load drivers.

  Is this normal?

  Concerning

  The PC is under Windows 7 Pro. I searched on google for similar problems, where I found one where someone said that the culprit is that the chipset of the motherboard not give not the PCIe card delay what he needs on a start cold in order to be recognized. A reboot gives the time required and the card works.

• How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  Hung Nguyen

  Hung Nguyen,

  The installation of drivers for all targets in real-time remotely is more or less the same. First install the driver (in your case the NO-Sync) on your PC, then install it on your system remotely through MAX. For step-by-step instructions, see install the software on your NI CompactRIO controller.

  See you soon,.

• get to see the list of device only simulated pxi card

  Hello

  I use the nodes property of the system and peripheral DAQmx to get the logical name two card PXI, PXI-5441 and PXI-5610.

  When I ran the vi, nothing came.

  I then added a device simulated, the logical and physical name named were recovered.

  No idea why my vi does not return the two actual cards info?

  Thank you

  Olivier

  Hello Olivier,.

  The reason why your module PXI-5441 and PXI-5610 do not appear in the list of devices is because they are not DAQmx devices. You can get the same information using the niModInst get attributes of polymorphic VI installed device.  Of course, you also need to use the public meeting of the installed devices niModInst and niModInst screws of Session of installed devices close as well.

  Kind regards

  Wallace F.

• I have a PC brand new - HP and played Chess Titans. Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.

  original title: Chess Titans

  I have a PC brand new - HP and played Chess Titans.  Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.  What's past and how to fix this.  Thank you.

  These error messages can occur if you (or software) also disabled Aero. Aero must be on (and supported by the video card) to play Chess Titans. "192GO should be enough for everyone." (of the miniseries "Next generation jokes")