Digitizer unusable iPad screen after 1 day!

Similar Questions

• IPad air 1 white screen after update?

  I had recently updated my Ipad (16 gb, Wifi) 1 air to ios 9.3.5. After using it for a day now the ipad screen is empty.

  Can anyone help or problem similar face?

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo

  It may take up to 30 seconds.

  See you soon

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Hello

  The best way to save battery life is to go into the settings and turn off Apps Refresh

  I now get 3 / 4 hours of battery life more.

  You cannot return to a previous ios 9.1

  See you soon

  Brian

  PS

  If you still have a problem iCloud backup now

  Then restore settings to get rid of any bugs.

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• Black Windows 7 64 bit computer after 30 days screen activated

  Original title:

  I expect Windows to work

  I installed Windows 7 64 bit on a computer that has installed several times before. After 30 days of apx screen turned black. In past you have made a phone call and that's all. What gives? I used WIN for years. I'm a pro but don't feel like...

  Bob

  Maybe you have reinstalled Windows 7 too many times. You should try phone activation even once. I hope you can get it reactivated:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  In the future, first create an image of the freshly activated installation system. This will allow you to simply restore the image saved when you feel the need to have a new copy of Windows 7 is installed:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

• the 5s iPhone camera is still stuck in black screen after upgrading to iOS 9.2 still frozen just like with iOS 9.1

  I updated my iphone to iOS 9.1 5s, but the camera does not work, most of the time that it was stuck on the black screen. I read in a forum as there are a lot of users affected by the present. "Waited for the iOS 9.2, hoping that it will fix the bug. Finally iOS 9.2 has been launched. Happy to download it thinking that it is the answer to the question of the camera. For a while camera works perfectly, but after 2 days, it was stuck at the black screen forever. It worsen the problem of camera. Hoping someone can help me to fix my phone's camera. Thank you in advance.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• "Hey Siri" does not work on iPad Air after updating iOS 10

  iPad Air does not "Hey Siri".  On the other hand, Siri works when I hold the home button.  I disabled Siri and then turn it back on and did the same for the Air iPad and not luck.  My iPhone IS working as it should with Siri.

  Hi Charles!

  I see that you are curious, why "Hey Siri" does not work for your iPad Air after update to iOS 10. I know it's important to make sure that everything works correctly after an update. I'm happy to help you!

  Looks like your iPad model is not compatible with this feature, unless it is plugged into a power source. The problem persists while your iPad to the that air is charging? Take a look at the following Web site:

  Enable or disable the "Hey Siri" and customize the functionality

  To ask questions without pressing the Home button, plug your electrical appliance and turn on ' Hey Siri. With iPhone 7, iPhone iPhone iPhone 6s, 6s, 7 more more, iPhone and iPad (9.7 inches) Pro SE you can use this feature without plug power.

  Use Siri on your iPhone, iPad or iPod touch - Apple Support

  Have a great day!

• Qosmio F60 - 11 c - black screen after update of Windows 7 Directx11

  Hello
  Two days ago I've updated Directx version because I want to try call of Duty Black Ops on my laptop. I've updated normally and it works perfectly but after a day at the restart of Windows7, after Windows 7 logo, I have a black screen and cpu fan running at full speed. So I used Toshiba Recovery Center and I got my pc to make settings. When it installs the drivers crashing into the graphics driver again. After that, I installed Windows 7, but I am using my computer on the resolution of 640 x 480 with 8 colors... And I can use the security with network mode but if I install the driver for GT - 330M and restart the computer, it hangs on after restarting windows 7.
  I tried to change the options in the bios, but it's always the same problem.

  * My :* graphics card Nvidia GT330M
  * :* Bios version 2.50 / EC2.40 (last update on the Web from Toshiba site)
  * Nvidia Driver :* 260.64

  I downloaded 197.16, 197.71, 258.80 drivers Nvidia and laptopvideo2go, but when I try to install these versions, it does not compotible with my control panel.

  IM totally crushed now and I do not want my laptop to Toshiba Technical Service which is in Turkey. For an easy fix, they spent 30 days...

  You have an idea?

  Thanks in advance
  Macaws.

  Post edited by: araskalyoncu

  > I used Toshiba Recovery Center and I got my pc to make settings
  What happens then?
  Problems after installing the operating system recovery disc?

  > When it installs drivers crashing into the graphics driver
  You n t need to install all the drivers after installing the recovery disc. The recovery disk installs OS Win and also drivers needed!

  > I downloaded 197.16, 197.71, 258.80 drivers Nvidia and laptopvideo2go, but when I try to install these versions, it does not compotible with my control panel.

  If you want to install non-Toshiba drivers, you will have to do it in the Device Manager.
  You must use the Advanced installation procedure and have point to the driver files (ini files) that you have downloaded and stored on the HARD drive.
  You have simply force windows to select this driver.

• Re: Satellite L675-10 t black screen after disassembly problem

  Hi all

  I recently had some problems with my L675-10T overheating, even when I was with a big fan of cooling for the games.

  I realized that the problem resulted from blocked exhaust and dust and it is why, after reading and watching the many tutorials, I opened my laptop computer successfully and all cleaned up.

  The temperature dropped to 20 c and I was happy.

  The next night, however, took my laptop and headed for the living room, and it will stop.
  Black screen and nothing passed. So I ran to the internet and found this solution, it worked btw.

  1. turn off your computer
  2. unplug all wires (including energy)
  3. disconnect the battery from the bottom of the computer.
  4 re - connect the power cable. (the battery should not be in the computer)
  5. turn power on. The screen works. Choose start windows normally. (if you get this screen)

  The thing is, the same thing happened to me this morning as well.
  Twice in 2 days and im a little worried I did something wrong during Assembly of the laptop or something. Any ideas? Or do I keep accountant with the above solution?
  Looks like a mess of power upwards of sorts.

  Thank you in advance.

  Hello

  I assume that this question has not happened before you have disassembled the laptop. Right?
  To be honest this similar issue happened to me to. The portable light not (black screen) after I'm entered in the mode 'sleep'. However, this happened only once

  It s hard to tell why this happened to you it of not impossible that you have damaged something for disassembled the procedure.

  However, the fact is that the warranty is not valid more because you opened the laptop. That is why any approach (especially parts replacement) to solve this problem would cost money.
  So ultimately it s your decision: a technician visit to downtown to see the pieces of equipment or keep your stay with the workaround mentioned above.

• CAN´t activate Ipad 2 after update

  I have can´t activate my Ipad 2 after the last day, because for some reason any I reach the activation of the can´t server.

  And if I try to start in itunes on my computer, so I can see the ipad in the Solution Explorer, but it dosen´t start in itunes.

  Anyone have any ideas?

  I have the same problem with my iPad 1 Air.

  Apple support doesn't help as usual!

• Deterioration of the system after 3 days

  Hey guys, I got this annoying problem with el capitan in my macbook pro 15 "2010, i5, ssd, fresh installation; He did all the updates and a few days ago I started having this problem of cycling: after 3 days of availability, with all works ok, regardless of the application you were using, some parts of the system are starting to freeze, so you could not open the FILE dialog box (which is part of the operating system independent of the application to use)... simple as that. even a browser such as firefox, the browser itself continues to work but if you try to save a page it frozes. When it happened he couldn't also use text editor, facetime, imessage... He keept Flash but never started. I tried with a lot of apps and it's the same thing. In this case, the only thing that worked for me was to restart OSX, which is not acceptable to me, because we cannot very often, it is not acceptable for a unix OS. The strange is that some system applications, such as finder, continues to work, but others, as cited previously, not more.

  I checked the RAM with MEMTEST and Apple hardware test modules, but there is no error; I thought that perhaps this problem could be the cause of errors in file system, when, at the time that the system needed to extract information from this dialog box (save, file...), in some sort could not read or access it from the file system; What do you think of this theory? My ssd is new and I've checked the permissions and the fact that I can to check its integrity, but I'm on el capitan, which seems to be a software utility disk with more limitations than the versions previous...

  In any case, I first run disk utility, reboot into recovery and frst help provided by the normal system; It gave me the error code 8 and fixed; but I started in recovery mode and ran again, and he has new found problems and that fixed it. but Frost guard happenning every 3 days, sort of; When I restart, everything supports to normal...

  A coleague told me I have to reinstall the system and restore everything by hand, do not use the backups time machine; I don't want to do that, but if needed I will; But first of all, I would like to know from you.

  Take the advice of your friend.

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• I get a blue screen almost every day

  Hello

  I need help.  I get the blue screen almost every day.  Here are 4 last minidumps.

  Thank you

  JB

  ==================================================
  Dump file: Mini090510 - 01.dmp
  Crash time: 05/09/2010 15:00:51
  Bug Check String: KERNEL_MODE_EXCEPTION_NOT_HANDLED
  Bug check code: 0x1000008e
  Parameter 1: 0xc0000005
  Parameter 2: 0x8229ac7d
  Parameter 3: 0x9daf0ce8
  Parameter 4: 0x00000000
  Caused by the driver: ntkrnlpa.exe
  Caused by the address: ntkrnlpa.exe + 4ac7d
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.0.6002.18267 (vistasp2_gdr.100608 - 0458)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\Mini090510-01.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 6002
  ==================================================

  ==================================================
  Dump file: Mini090410 - 02.dmp
  Crash time: 2010-09-04 12:07:36
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 0x0cfc06e4
  Parameter 2: 0x0000001b
  Parameter 3: 0x00000001
  Parameter 4: 0x822c71d8
  Caused by the driver: ntkrnlpa.exe
  Caused by the address: ntkrnlpa.exe + 4dfd9
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.0.6002.18267 (vistasp2_gdr.100608 - 0458)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\Mini090410-02.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 6002
  ==================================================

  ==================================================
  Dump file: Mini090410 - 01.dmp
  Crash time: 2010-09-04 10:05:34
  Bug Check String: MULTIPLE_IRP_COMPLETE_REQUESTS
  Bug check Code: 0 x 00000044
  Parameter 1: 0x86ef5b00
  Parameter 2: 0x00000e7a
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: Ntfs.sys
  Caused by the address: Ntfs.sys + 111 has 1
  Description of the file: NT File System Driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.0.6000.16386 (vista_rtm.061101 - 2205)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\Mini090410-01.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 6002
  ==================================================
  ==================================================
  Dump file: Mini090110 - 01.dmp
  Crash time: 2010-09-01 18:13:14
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 0xd4a7d645
  Parameter 2: 0x0000001b
  Parameter 3: 0x00000001
  Parameter 4: 0x822e8278
  Caused by the driver: hal.dll
  Caused by the address: hal.dll + 770c
  Description of the file: Hardware Abstraction Layer DLL
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.0.6002.18005 (lh_sp2rtm.090410 - 1830)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\Mini090110-01.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 6002
  ==================================================

  Hello

  Use methods such as the SFC, CheckDisk, driver updates, and others in the resolution of the issues identified
  at this link as they will help solve or at least narrow down the questions. After that you can post the
  information of BlueScreenView and these other utilities, so we can offer more specific advice. Of
  check with a real store of the computer or the system manufacturer's support would be a good idea though
  I would try the possible solutions, you can first.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 4 answers. Don't forget to check FaultWire links for those
  Bug_Checks as their recommendations are usually very good.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  You can use BlueScreenView to stick the BSOD info in a message here.

  NOTICE - report HTML all THE ELEMENTS or right-click on a BSOD line and select the same. Then, copy and
  Paste the lines in a message here. Make sure and check the file name section. Also check the time
  in MyEventViewer for more information as possible.

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Black screen after start - "Video_tdr_failure atikmpag.sys.

  Original title: black screen after startup

  A few days ago I accidentally dropped my laptop I was trying to pick it up. It froze and I used the power button to stop it. The next day, it worked very well, I played a game, but then the screen got all blurry and it froze again. Therefore, whenever I started it normally, I would get a blank screen. But in Safe Mode, it worked fine.

  I assumed it was my hard drive, I got a new and it seemed to work very well, I had reinstalled W7. Until I tried to install the updates and it the screen went white again. I used the system restore and got it to do work. Then decided to move to W10.

  After the upgrade, the pc restarted with a white screen, I have it connected to the TV with an hdmi cable while you try to start it, then the screen worked fine. He stayed very well until I tried to install the updates. It would not just start up. He gave to the page «Video_tdr_failure atikmpag.sys»

  I returned to Windows 7 and now it always starts with a blank screen.

  * the screen works very well throughout the boot process

  And works fine in Safe Mode *.

  Chances are, at least (if not more) there is now a default in the video circuits.

  Be aware, the laptops are very delicate animals.  This type of accident will most often mean end of system life.  The biggest problem is the cost of the repairs in such a situation.  The pieces are almost all owners - read overvalued.  Repairs made by technicians who are not deeply experienced in the setting of your particular brand/model are often insufficiently.  Which leads you onto the OEM repair service that is overvalued.

  The result is that once a laptop is spent on the brand of 3 years, repair of such a system in such circumstances: the replacement more often.

  Well consider a desktop computer type for a replacement.  They are cheaper to begin with, usually more powerful - sometimes by a factor of 2, are easily repairable using components of off - the shelf that are commonly available and one made by several competitors.   Desktop computers usually hold up well almost two times longer.  From an ergonomic point of view, laptops are considered experts machines of 20 minutes.  Use of meaning beyond that time can be bad for your health.

• What happens to windows 7 after 30 day trial and it is not activated?

  my windows 7 is not yet activated, and he left 2 days. If I activate what happens after 2 days?

  It goes into reduced functional mode, you will not be able to access some update, security example updates e.g. Microsoft Security Essential updates. The screen turns black, indicating that it must be enabled.

  Activate Windows 7 on this computer:
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------